Error while Posting ABIF: Message no. AA813

Contact your system administrator (table error)
Message no. AA813
Diagnosis
The investment support key 01 for the chart of depreciation PSL has not been defined.
Procedure
Define an investment support key using the Customizing menu.

Dear Rupesh,
Please refer SAP Note 1359761 - AA 813 when posting investment support. Detail as under:
Symptom
The system issues error message AA 813 when you enter an investment support.
Other terms
T085
Reason and Prerequisites
For the posting, the system uses a transaction type that does not match the investment measure.
Solution
When defining an investment measure, the system creates relevant transaction types. In these transaction types, the last two characters of the investment measure are encrypted.
For the investment measure, the system therefore creates, for example, the transaction types
I51 (Transaction type for claiming investment support)
K51 (Transaction type for claiming investment support prior-year acquisitions)
J51 (Transaction type for extraordinary clearing of investment support prior-year acquisitions)
For consistency reasons, you can post the investment support area that belongs to the investment measure 51 only with the investment support transaction data in which the investment measure is encrypted. You must note this restriction if you also create separate transaction types for entering investment support.
Thanks!!!
Murlidhar Khatri

Similar Messages

Error while posting SOAP message

I am trying to post a SOAP message but I keep getting this error. Can anybody help me on this. I tried using ALTOVA spy and SOAP Ui but the result is the same error.
     <SOAP:Body>
          <SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>ADAPTER.JAVA_EXCEPTION</code>
                         <text><![CDATA[
com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=null;
*     at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId*(AbstractLookupManager.java:173)
     at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431)
Scenario is SOAP Sender and IDOC reciever.

I tried reconfiguring also.
When I test from Integration Engine in RWB using the test message it is sucsseful. Infact I can see the IDOC too.
But when the basis guy tested with Adapter engine in RWB using the test tool, it gives the following error:
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=BusComp_Siebel1;TS=;AN=SI_Sales_Order_OB_Async;ANS=http://trm.com:o2b:SalesOrderCreate; in the current context [Unknown].
Any idea where is the problem.
When we tried the WSN step we are facing this error in the very first step.
WSDL1.1, WSDL 2.0 definition element expected. Found [html: null] .
Edited by: Chandra Gunapati on Oct 7, 2009 10:00 PM

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Error while activating any message mapping in IR: very strange

hi forum i m getting an error in IR while activating any messageMapping.
the error is too long to be posted....i m posting a few lines of that:
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))

Sudeep,
Let we try this way. I'm sure you might have some existing mapping objects in IR.
Try to change that object(Description give some name) and activate again the object.
Reply your results whether you are getting the same error.
One sec before changing the object just test the mapping and change the object.
Best regards,
raj.

Error while posting FB60 -

Hi,
I am getting the below error while posting Vendor invoice FB60. Please help me...
Constant ! for Ledger ZWN00 does not contain any value*
Message no. GLT2301
Thanks
Kishore

Hi,
May be the company code assignment to specified special purpose ledger have the real time posting.
VVR

Error while posting sec.HighEd cess (1%) in J1iin.

we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such comments

Hey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda

Error while posting usint tcode f-02 in fi

Hi all,
I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document but while saving it gives me the following error message:
Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
Message no:f1030
DIAGNOSIS:
The application has accessed a funds management or cash management module with parameters messing or defective.
PROCEDURE:
Notify your system administrator.
Hope some body would help me out.
Thanks

Hi,
Not sure if this works out
try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
double click on company code and see if any thing is assigned in the feild to FM.
regards
genie

Error while Posting GR or GI

Dear All.
I am getting the below error while posting a Goods Receipt / Goods issue, Kindly suggest what could be wrong ??
"You are not allowed to post manually in the substitute system
Message no. FDM_MIRROR301
I am trying to post the GR against a standard PO and trying to make GI against standard outbound delivery
Best Regards,
Santosh Kumar B V

Hi Santosh,
I believe you are using the FSCM - Collections module.
This clearly looks like a program error.
There are various SAP notes for the FDM_MIRROR errors. I have searched a few but could not make anything with number 301.
This to me looks like a new error and you may report the same to SAP for a note.
Thanks
Aravind

Error while posting J1IS

Hi,
I am getting the below error while posting the J1IS with reference to the STO 351 document.
Could you please advice?
Error updating table J_1IEXCHDR.
Message no. 8I308
Regards,
Mohd Ali.

Check it using SM13 transaction to know the real cause of error.
http://help.sap.com/saphelp_nw04/helpdata/en/e5/de873b35cd11d3acb00000e83539c3/content.htm
Regards,
S Anand

Error while posting IDoc

Hi,
i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.

First ,
check the partner profiles in R3,
i.e. a logical system is defined for XI , particluar Message type is added on inbond side and selected the releavnt messge type and and process code. this is all in WE20.
defining a logical system is in SALE.
then ditribute u r the model in BD 64
once every thing is OK in R3
on PI.
create a RFC destination of type R3 which points to R3 , try remote log-on .
this will be used in receiver chaneel
and check u r receiver chaneel is defined under Business system of R3, and BS refers to same client where partner profiles are defined.
and one of the following should be in place.
check 'apply control record from payload' if ur explictly passing Control record from mapping
otherwise,
check sender service and receiver service in Receiver agreement and select appropriate systems.
Regds,
Suresh

Error while posting the CREMAS03 Idoc

Hi
I a getting the Error while posting CREMAS03 idoc from File
The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
but when i cheked with the functional guys , the comany code exits..
Any one have any idea
SV

Hey,
    seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.

Error while posting FBS1 via BAPI

Hi Experts,
getting below error while posting FBS1 via BAPI_ACC_DOCUMENT_POST
TYPE ID                   NUMBER MESSAGE
E   |RW                  |609   Error in document: BKPF 10000022440GF3032010 TERCLNT303
E   |RW                  |609   Error in document: 100000224 AC_DOC_NO
FB03 Header values --
Document Number 100000250        Company Code    40GF         Fiscal Year     2010
Document Date   30.11.2010       Posting Date    30.11.2010   Period          11
Currency EUR
FB03 Line item 1 ( posting key 40 )
G/L Account     711014
Company Code    40GF
Amount          100,00 EUR
Cost Center     40GF219001
Quantity        0,000
FB03 Line item 2 ( posting key 50 )
G/L Account     167005
Company Code    40GF
Amount          100,00 EUR
Assignment      20101130
Text            ITEM TEXT 7
Please tell me what i am missing in below code because of which i am getting error in return table
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
      own_logical_system = gd_documentheader-obj_sys.
gd_documentheader-obj_type   = 'BKPF'.
gd_documentheader-obj_key    = '10000022440GF3032010'.
gd_documentheader-username   = sy-uname.
gd_documentheader-header_txt = 'BAPI Test'.               "#EC NOTEXT
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev = '05' .
gd_documentheader-comp_code = '40GF'.
GD_DOCUMENTHEADER-AC_DOC_NO = '100000224' .
gd_documentheader-fisc_year = '2010'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = sy-datum.
GD_DOCUMENTHEADER-TRANS_DATE =
GD_DOCUMENTHEADER-VALUE_DATE =
GD_DOCUMENTHEADER-FIS_PERIOD = '11' .
GD_DOCUMENTHEADER-DOC_TYPE   = 'SA' .
GD_DOCUMENTHEADER-REF_DOC_NO =
GD_DOCUMENTHEADER-COMPO_ACC =
gd_documentheader-bus_act    = 'RFBU'.
ENDFORM.                    "fill_header
FORM fill_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 1.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = -100.
APPEND T_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 2.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = '100'.
APPEND T_currencyamount.
CLEAR T_currencyamount.
ENDFORM.                    "fill_currencyamount
FORM fill_accountgl.
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 1.
T_accountgl-gl_account     = '0000711014'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-DE_CRE_IND     = 'S' .
T_accountgl-tax_code       = 'V1'.
T_ACCOUNTGL-ACCT_KEY       =
T_accountgl-item_text      = 'BAPI Test G/L line item'. "#EC NOTEXT
T_ACCOUNTGL-BUS_AREA       =
T_accountgl-costcenter     = '40GF219001' .
T_ACCOUNTGL-ORDERID        =
T_ACCOUNTGL-MATERIAL       =
T_ACCOUNTGL-QUANTITY       =
T_ACCOUNTGL-BASE_UOM       =
T_ACCOUNTGL-BASE_UOM_ISO   =
T_ACCOUNTGL-PLANT          =
T_accountgl-profIT_ctr     = 'S001' .
T_ACCOUNTGL-WBS_ELEMENT    =
T_ACCOUNTGL-BILL_TYPE      =
T_ACCOUNTGL-DISTR_CHAN     =
T_accountgl-ac_doc_no      =
T_accountgl-acct_type      =
T_accountgl-doc_type       =
T_accountgl-comp_code      = '40GF' .
T_accountgl-func_area      =
T_accountgl-plant          =
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
T_accountgl-pstng_date     =
T_accountgl-value_date     =
T_accountgl-customer       =
T_accountgl-vendor_no      =
T_accountgl-costobject     =
T_accountgl-acttype        =
T_accountgl-val_area       =
T_accountgl-po_number      =
T_accountgl-po_item        =
APPEND T_accountgl to t_accountg2 .
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 2.
T_accountgl-gl_account     = '0000167005'.
T_ACCOUNTGL-STAT_CON       =
T_ACCOUNTGL-REF_KEY_1      =
T_ACCOUNTGL-REF_KEY_2      =
T_ACCOUNTGL-REF_KEY_3      =
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-DE_CRE_IND     = 'H' .
T_accountgl-tax_code       = 'V1'.
T_ACCOUNTGL-ACCT_KEY       =
T_accountgl-item_text      = 'ITEM TEXT 7'. "#EC NOTEXT
T_ACCOUNTGL-BUS_AREA       =
T_accountgl-costcenter     = '40GF219001' .
T_ACCOUNTGL-ORDERID        =
T_ACCOUNTGL-MATERIAL       =
T_ACCOUNTGL-QUANTITY       =
T_ACCOUNTGL-BASE_UOM       =
T_ACCOUNTGL-BASE_UOM_ISO   =
T_ACCOUNTGL-PLANT          =
T_accountgl-profIT_ctr     = 'S001' .
T_ACCOUNTGL-WBS_ELEMENT    =
T_accountgl-ac_doc_no      =
T_accountgl-acct_type      =
T_accountgl-doc_type       =
T_accountgl-comp_code      = '40GF' .
T_accountgl-func_area      =
T_accountgl-plant          =
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
T_accountgl-pstng_date     =
T_accountgl-value_date     =
T_accountgl-customer       =
T_accountgl-vendor_no      =
T_accountgl-costobject     =
T_accountgl-acttype        =
T_accountgl-val_area       =
T_accountgl-po_number      =
T_accountgl-po_item        =
APPEND T_accountgl to t_accountg2 .
ENDFORM.                    "fill_accountgl

Hi Experts,
getting below error while posting FBS1 via BAPI_ACC_DOCUMENT_POST
TYPE ID                   NUMBER MESSAGE
E   |RW                  |609   Error in document: BKPF 10000022440GF3032010 TERCLNT303
E   |RW                  |609   Error in document: 100000224 AC_DOC_NO
FB03 Header values --
Document Number 100000250          Company Code    40GF         Fiscal Year     2010
Document Date   30.11.2010           Posting Date    30.11.2010   Period          11
Currency EUR
FB03 Line item 1 ( posting key 40 )
G/L Account     711014
Company Code    40GF
Amount          100,00 EUR
Cost Center     40GF219001
Quantity        0,000
FB03 Line item 2 ( posting key 50 )
G/L Account     167005
Company Code    40GF
Amount          100,00 EUR
Assignment      20101130
Text            ITEM TEXT 7
Please tell me what i am missing in below code because of which i am getting error in return table
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
      own_logical_system = gd_documentheader-obj_sys.
gd_documentheader-obj_type   = 'BKPF'.
gd_documentheader-obj_key    = '10000022440GF3032010'.
gd_documentheader-username   = sy-uname
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev = '05' .
gd_documentheader-comp_code = '40GF'.
GD_DOCUMENTHEADER-AC_DOC_NO = '100000224' .
gd_documentheader-fisc_year = '2010'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = sy-datum.
GD_DOCUMENTHEADER-FIS_PERIOD = '11' .
GD_DOCUMENTHEADER-DOC_TYPE   = 'SA' .
gd_documentheader-bus_act    = 'RFBU'.
ENDFORM.                    "fill_header
FORM fill_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 1.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = -100.
APPEND T_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 2.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = '100'.
APPEND T_currencyamount.
CLEAR T_currencyamount.
ENDFORM.                    "fill_currencyamount
FORM fill_accountgl.
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 1.
T_accountgl-gl_account     = '0000711014'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-item_text      = 'BAPI Test 1'.
T_accountgl-costcenter     = '40GF219001' .
T_accountgl-profIT_ctr     = 'S001' .
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
APPEND T_accountgl to t_accountg2 .
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 2.
T_accountgl-gl_account     = '0000167005'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-item_text      = 'ITEM TEXT 7'.
T_accountgl-comp_code      = '40GF' .
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
APPEND T_accountgl to t_accountg2 .
ENDFORM.                    "fill_accountgl

"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Error while Posting ABIF: Message no. AA813

Similar Messages

Maybe you are looking for