Error While posting  Cenvat in T-Code J1iex.

Dear SAP Experts,
I am facing one error that while posting cenvat in J1iex  system is giving message as " No Cenvat Amount to be  posted, No Cenvat amount to be reversed".
Please guide me if any one has worked on this area and faced this kind of problem.
With Best Regards
Debjeet Banerjee

Hi Debjeet,
Kindly verify
1] Whether chapter id is maintained in the material master or not.
2] Whether excise duty is captured in MIGO or not
3] Also verify Movement type versus register relevance in the menu path
Logistics gen> tax on goods movement>India-->Business transactions --> Incoming invoice -->Specify which MoT involve Excise Invoice.
Regards,
Amol

Similar Messages

  • Getting error while posting invoice in T-code F-02

    Hello,
    When i try to post invoice in T-code F-02 gives me the error message"There is no item category assigned to account bank a/c/company"
    Can any one suggest me why this is error came up and how to resolve this.
    Thanks,
    Lavi

    Hi,
    I think u have activated doc splitting i.e. new gl acconting. Go to
    Financial Accounting (New) > General Ledger Accounting (New) > Business Transactions > Document Splitting  > Classify G/L Accounts for Document Splitting
    And make setting for u r account. Also see all the nodes there are configured, to avoid any other error.
    Regards

  • Error while posting material using transaction code MB1C

    Hi Experts,
    While I am trying to post material into warehouse its giving warning message initially as : MAT  IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
    MESSAGE NO: M7133
    Diagnosis
    Material is a missing part of plant
    when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
    MESSAGE NO: L9023
    All the materials that you use within a warehouse no must also be defined for this warehouse no.
    Can Any one please explain me how to resolve this error in detail.
    Thankyou
    SAHER

    Dear Siraj,
    I have extended the material to warehouse numbers as you suggested.  Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
    then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
    Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
    MESSAGE: L9009
    Thank you,
    SAHER.

  • Error while posting mb1c

    He seniors,
    I am getting error while posting stock in T. code- MB1C
    Error- G/L account 799999 dose not exists in company code.
    dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
    thanks......

    Dear Sundyeep,
    As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
    CHART OF ACCOUNTS (MOST URGENT)
    Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
    Thanks,
    Davinder
    Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM

  • Tax code error while posting Planned delivery costs in Import Scenario

    Hi!!!!!
    I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
    "Tax code V0 country IN does not exist in procedure ZAXINN"
    For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
    While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
    Please let me know what config is missing.
    Regards,
    Durga

    Is you ZAXINN assigned to the country India
    and is your taxcode (created in FTXP) created for country India?
    kr
    hakan

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error while posting parked documents

    HI ALL,
    After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Please check it.
    Thanks!

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Error while posting asset aquisition

    Hi to All,
    I am getting following error while posting aquisition entry.
    "Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
    I had made all settings what the error says above but still error persists.
    PLEASE ITS VERY URGENT
    tanuja

    Hi tanuja,
    Please check the setting in the T- code OABT.
    If it helps pls reward some points.
    JS

  • ErroR while posting J1IH (TR6)

    Hello Everybody
    I had the following error while posting J1ih.
    Balancing field "Profit Center" in line item 001 not filled
    In FB50 the following entry was posted with profit center PH1000
    PLA On Hold A/C Dr  25000
        to Bank Account Cr 25000
    When i am trying T Code J1IH
    PLA On Hold A/C Cr  25000
    Basic Excise Duty A/C Dr 22000
    ECS                            Dr 2000
    SECS                          Dr 1000
    When i save it the above mentioned error comes.
    Please Help
    Sunil Kumar

    The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
    So somehow it is not getting dervied for the PLA line item. Check the following:
    1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
    2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
    Thanks and regards
    Kedar

  • Error while posting FB60 -

    Hi,
    I am getting the below error while posting Vendor invoice FB60. Please help me...
    Constant ! for Ledger ZWN00 does not contain any value*
    Message no. GLT2301
    Thanks
    Kishore

    Hi,
    May be the company code assignment to specified special purpose ledger have the real time posting.
    VVR

  • Error while posting 561 Document

    Dear All
                Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
    Even OBYC setting for that valuation class already assigned.
    please advice.
    Regards
    Kumar.

    Hello Anandhakumar ,
    please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
    and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
    it could solve your query.
    regards,
    Ninad Kshirsagar

  • Error while posting usint tcode f-02 in fi

    Hi all,
    I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document  but while saving it gives me the following error message:
    Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
    Message no:f1030
    DIAGNOSIS:
    The application has accessed a funds management or cash management module with parameters messing or defective.
    PROCEDURE:
    Notify your system administrator.
    Hope some body would help me out.
    Thanks

    Hi,
    Not sure if this works out
    try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
    double click on company code and see if any thing is assigned in the feild to FM.
    regards
    genie

  • Error while Posting Document in FBV0

    Hi Guys,
    Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
    Error: "No batch input data for screen SAPMF05A 0700"   
    Kindly suggest
    Thanx and Regards
    Munender

    Also have a look at the following notes:-
    =>  Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
    =>  Note 800177 - FB01: No batch input data for SAPMF05A 0700
    thanks
    G. Lakshmipathi

  • FA Retirement- 21151: error while posting asset document: '100000039'

    Hello Experts,
    I have a client who encountered this error during fixed asset retirement - scrapping.
    After selecting the asset to be retired, sap did not assign an account in the account column, but the user
    was able to save the document.  After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'.  The document number the systems is referring to is the last document saved but sap did not assign an account code.
    Please help. My client is using sap b1 8.81 patch5.
    Regards,
    Luz

    Hi Too Mui Hwee,
    What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
    Thanks

  • Error while posting IDoc

    Hi,
    i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.

    First ,
    check the partner profiles in R3,
    i.e. a logical system is defined for XI , particluar Message type is added on inbond side and selected the releavnt messge type and and process code. this is all in WE20.
    defining a logical system is in SALE.
    then ditribute u r the model in BD 64
    once every thing is OK in R3
    on PI.
    create a RFC destination of type R3 which points to R3 , try remote log-on .
    this will be used in receiver chaneel
    and check u r receiver chaneel is defined under Business system of R3, and BS refers to same client where partner profiles are defined.
    and one of the following should be in place.
    check 'apply control record from payload' if ur explictly passing Control record from mapping
    otherwise,
    check sender service and receiver service in Receiver agreement and select appropriate systems.
    Regds,
    Suresh

Maybe you are looking for