Error while posting FF67 "Manual Bank Statement"

Hi all,
I have a problem when I was posting u201CManual Bank Statementu201D
In Transaction Code: FF67 when I am posting the following error is coming:
u201CBank account does not existu201D
     Message no. FV003
Diagnosis
     The bank account number 211001 could not be found.
Procedure
     Check the bank account number or the corresponding entry in the
     directory of the house bank accounts.
Note: in the aboove "211001 is my Check deposit G/L a/c numhber"
Can any one tell me complete solution to post an Manual Bank Statement.
Itu2019s very IMP to me.
Thanku

Hello Mahesh,
Please check the following points.
a) In case if the Bank Account number in the account statement exceeds 24 places, you can get this error.
b) Note 823808 is not yet implemented (either manually or through support packs) in the system
In case, even after checking the above points you still face the issue...then please inform a developer in your team to check the logic in Function Module GET_BANK_ACCOUNT during debugging FF67.
Hope this info helps you resolving the problem.
With Regards
Vijay Gajavalli

Similar Messages

  • FF67 - manual bank statement - tax posting

    Hello everyone,
    When posting a manual bank statement via FF67, the system doesn't automatically check the box "calculate tax" for bank charges (system ECC 604). In other words, there is no tax posting in the FI-document.
    Has anyone a suggestion on how we can default the "calculate tax" to be checked? It used to work before the installation of enhancement pack 4.
    Many thanks.
    Kind regards,
    Becky

    Hi,
    Sorry i cannot think of any other idea.
    Can you check whether you have given the Right Tax Category in GL FS00.
    When you give then only system will ask for tax code then only calculate tax comes into picture.
    If that is also there then better raise a OSS message with SAP

  • FF67 Manual bank statement transactions not updated in G/L accounts.

    Dear All,
    The user has posted the Manual bank statement in the FF67 and saved. But the postings are not updated in the G/L accounts but in FF67 the bank statement is showing that "posting completed".  When I check that The Job name has finished successfully in sm37. but when I check in SM35 the batch session also has been created with the same user ID. But it has not processed.
    When i ask the user he is saying that they don't process the Batch input session. They just save the FF67 T.code. after some thime the job will complete and post to the G/L accounts.
    Please could any body let me know what could be the problem.
    When we enter the FF67 the system will ask the start variant and the processing type. There are 4 options in the processing type. could any body explain me about the 4 options.
    Regards,
    Mr.Rao.

    Dear All,
    Here the user has selected the processing type is 2. That's why the system is created the batch input secssions. so the G/L accounts will be hitted after the batch input secssion are processed.
    Regards,
    Mr.Rao.

  • FF67 - Manual Bank Statement, what is Customer matchcode  (sel.)?

    Hi Expert,
    In FF67 manual banks statement customization, we have a field called customer matchcode  (sel.) (FEBMKK-KUNNR_MC) under the Define Variants for Manual Bank Statement (OT43).
    Questions:
    Could anyone highlight me what is the customer matchcode  (sel.) (FEBMKK-KUNNR_MC)?
    Where is the master data (should it be in customenr master data level) set for the customer match code?
    What is the fields that are commonly used for FF67 manual banks statement?
    Thanks in advance.
    sbmel

    Hello
    Please check the following link on match codes
    http://help.sap.com/saphelp_40b/helpdata/es/cf/21ef1f446011d189700000e8322d00/content.htm

  • FF67 - Manual bank statement 'not to be posted' error

    Hi all,
    I am using ff67 to view my manual bank statements but there is an amount with the status 'Not to be Posted'.
    I go into FEBAN to find more information and this document is set as 'incomplete' (yellow status). Can someone explain to me why this is happening and how to fix this?
    Thanks,

    Thank you for the response Atif,
    My question is: why was the wrong clearing entry originally posted?
    Because of this clearing entry, it looks like we now have an open item in the incoming account. When looking at the incoming/master accounts, after the manual posting has been made, we have an open item in the incoming account which cannot be cleared.
    Example
    Incoming a/c = -8000 <- this line is open
    Master a/c = 8000
    What is the way to proceed? thanks,

  • FF67 Manual Bank statement new house bank updation problem

    Hi Frds,
    I have one query regarding new house bank manual bank statement user worngly entered opening balance and closing balance same amount.Now he is trying to create 2nd statement but system is showing worng message and terminating.Kindly find below screenshot.
    1st statement status only entered.
    1. can i delete the 1 statement because statement status is Entered?
    2. if we are entering first time we should give the only opening balance?
    Transaction has to give transfer out clear sub account -/+?
    Kindly any one can suggest.I appriciate your valuable inputs.
    Regards,
    Nivas.

    It is Resolved.Thanks.

  • FF67 - Manual Bank Statement

    Hello Friends,
    I am having one problem in FF67.
    The following are the screen applicable to Following users in Development Client
    User XXXX
    Company Code:
    House Bank:
    Account ID:
    Statement Number:
    Statement Date:
    Currency:
    User YYYY
    Bank Key
    Bank Account
    Currency
    Statement Number
    Statement Date
    I have checked that all the same rights are assigned for both Users XXXX and YYYY.
    What could be the reason for different screens? we have also checked SU3 where all the parameters are same for both users.
    Regards,
    SDN Creature

    Answered. There was the settings. Gone to Settings > Specification. Ticked Int. Bank Determination

  • Manual bank statement post: with GL accounts

    User has posted the manual bank statement. It is successfully posted but in respective sub GL accounts open it management and line item management is not configured in the ledger. so after posting bank statement we have changed the open item and line item display.
    we have deleted and posted again but in main GL Account on line item is still exist and balance showing diffrence 470 EUR
    how can i change that GL Account as 0 Balance.

    Hi,
    When Manual bank statement is run, a JV gets posted knocking of subledger with debit or credit (Payment/Deposit) and one line item will be posted in the main bank account.
    In you scenario, take the document available in the main bank account and reverse it in transaction code FBRA. This will knock off all the balances and the ledger will be zero.

  • Manual bank statement incomplete

    While entering manual bank statement error is coming that manual bank statement inomplete: how to resolve this

    Gourav
    Go to FS10N of main bank Gl account
    Check what is the balance on the date
    this is the opening balance
    Now check similarly what is the net balace of both bank sub accounts( cheque issue clg account and cheque deposit clg account)
    aad with the opening balance of bank main account
    put this as closing balance in the innitial screen of FF67 ( closing balance)
    now this balance should be equal to the balance of statement balance that u r entering
    the amount that incresing the balce of main account would carry + sign
    and that reduces would carry - sign
    once ur statement balance and the balance u entered is equal( botoom part) u can save the screen( the statement)
    hop it would clear you
    Regards
    Anup
    Assign points if answer is useful
    Revert me if it not works

  • FPB7 Create Payment Lot after loading Manual Bank Statement

    Hello Everyone,
    My question is can we create payment lot after loading Manual Bank Statement(FF67).
    Thanks,

    Hi Imitiyaz,
    Transaction code-FF67 (Manual bank statement) is used to enter the bank statement data manually via dynpro. Moreover, since it contains no front end controls so it can be called via batch. You need to develop a custom program to cater the requirement.
    You can create a program which creates batch input sessions for transaction FF67. Use transaction SHDB to record the transaction in order to see program, dynpro and field names.
    Hope it helps...
    Thanks,
    Amlan

  • Error while posting manual bank statement in foreign currency

    The following error is being encountered "FV079-
    Foreign currency does not correspond to account currency"
    while posting manual bank statement in foreign currency.

    In statement upload, If you are entering any amount in Foreign currency, then currency key you enter in foreign currency should be other than that of Bank Account Currency. If both are same then how can system treat as foreign currency, so system outputs this message.
    Check your Bank Account currency and see that foreign currency you are entering is other than Account currency.

  • Manual bank statement - FF67 error

    i do not have bank statement. So i am trying to upload manual bank statement.
    I used TCode FF67. After Tcode, in next screen, it asking, bank id, housebank, etc. Also it is asking about opening & close balance. I entered close balance Rs.10000 (on random basis)
    Now it took me to next screen where i have to put Transaction Key (which i define), value date, Amount, doc number, etc....
    After i pressed enter, i gave following error:
    "There are no transactions that have this amount's plus or minus sign"
    My question...
    1. After  FF67 & filling detaisl like bank id & all, the page to which it took me is the page where i have to put transaction shown in my bank statement (recd by bank)
    2. How to overcome the error mentioned.
    I have posted the trasaction thru that bank.

    Hi,
    I m from Mumbai - India
    I have done FF67 all settings & i have checked all the settings.. All appear to be correct.
    I enter closing balance & statement date. I enter the details from bank statement. After that i press 'save' for two times. After that i see in SM35. But my programme is not appearing there....
    Let me know the error...
    NOTE: I have put for processing type as '3' (i.e. further processing in background) in the variant

  • Manual Bank Statement: saved & posted without errors but no FI doc

    Hi,
    I entered details for manual bank statement to clear a vendor payment. 
    The transaction used was "003- Cashed Check", which has interpretation algorithm "021 Reference document number search". I've read in another Forum thread that this interpretation algorithm searches for the data stored in the Reference field of the payment document. So I entered the same data in the Bank Reference field in the manual bank statement.
    The system did not throw any error, so I saved the bank statment and consequently posted. The status of the statement is "Manu. Posting complete".
    As far as I understand, when the statement is "posted", an FI doc will be automatically posted with the following entry:
         DR Bank Check outgoing
         CR Main Bank Account GL
    However, I cannot see this posting in both the Main Bank Account and Bank Check outgoing GLs.
    Am I missing any step? Or is the config wrong?
    Hoping for your guidance.  Thanks!

    Yes, the entries are correct.
    Below is the setup I did.  Should I change the Posting Type?
    Create & Assign Business Transactions
    1) Transaction: 002+
    Sign of the incoming amount: +/positive
    Posting rule: 002+
    Account modification: + (what does this do?)
    Interpretation algorithm:
    Text: Check credit memo through bank
    2) Transaction: 003-
    Sign of the incoming amount: -/negative
    Posting rule: 003-
    Account modification: + (what does this do?)
    Interpretation algorithm: 021 Reference document number search
    Text: Cashed check
    Define Posting Keys & Posting Rules
    Create Account Symbols
    SCHECKAUSGANG     Outgoing checks
    SCHECKEINGANG     Incoming checks
    Assign Accounts to Account Symbol
    1) Account Symbol: BANK
    AcctMod: + 
    Currency: +      
    GL Acct: ++++++++++                 
    Desc: Bank account
    2) Account Symbol: SCHECKAUSGANG
    AcctMod: +
    Currency: +      
    GL Acct: +++++++++1                 
    Desc: Outgoing checks
    3) Account Symbol: SCHECKEINGANG     
    AcctMod: +
    Currency: +       
    GL Acct: +++++++++6                  
    Desc: Incoming checks
    Create Keys for Posting Rules
    1) Posting Rule: 003-     
    Text: Cashed check
    2) Posting Rule: 002+     
    Text: Check deposit
    Define Posting Rules
    1) Posting Rule: 002+     
    Posting area: 1     
    Posting Key: 40           
    Account (Debit): BANK     
    Posting Key: 50           
    Account (Credit): SCHECKEINGANG     
    DocType: SA     
    Bank Statement-Posting Type: 1     Post to G/L account
    2) Posting Rule: 003-     
    Posting area: 1                
    Posting Key: (blank)
    Account (Debit): SCHECKAUSGANG     
    Posting Key: 50           
    Account (Credit): BANK     
    DocType: SA     
    Bank Statement-Posting Type: 4     Clear debit G/L acct

  • Manual bank statement upload error FB727

    Hi Experts
    When we are uploading the manual bank statements using transaction FF67, we are getting the error message FB727 "There are no transactions that have this amount's plus or minus sign"
    We are using SAP version 4.7, I am not sure how this message is coming and how can we correct this
    I could see there is a OSS note for this but that is not applicable for version 4.7 and above
    Rishi

    Hi Rishi,
    Message - FB727 says There are no transactions that have this amount's plus or minus sign
    While assigning the Business transactions to posting rules you may specified the +/- symbol to Incoming payments. Similarly while entering the amounts use the symbols.
    Eg: If the amount CHQ deposit (Incoming Payment) : +XXXX
          If the amount CHQ Issue (Out Going Payment)  : - XXXX
          If the amount Bank Charge (Expense-Outgoing) : - XXXX
    Amount with Symbol if you enter, Then you will not get this error.

  • Manual bank statement error: "Bank reference" field not filled

    Hi,
    I'm getting an error (see below) while entering details in the manual bank statement.  I've checked the variant already, and the manual bank statement variant with "Bank Reference" field is already deactivated. How come FF67 still validates on this field?
    Did I miss something?
    Hope for your speedy reply. Thanks!
    "Bank reference" field not filled
    Message no. FV094
    Diagnosis
    An interpretation algorithm is given in transaction 003-.  This algorithm interprets the value entered in the field "Bank reference" and automatically determines the items to be cleared.
    The field "Bank reference" is not filled.
    System Response
    No interpretation will be carried out.
    Procedure
    Recheck your entries.

    Hi,
    The Bank Statement Transaction you are using has an Int. Algorithm configured, which requires the Bank reference field.
    In IMG in the transaction where you create and assign business transactions to posting rules, there is also a filed for Int Algorithm. The system uses the Int Alg. to determine the fields on which to match and clear documents. The transaction you are using may have an int algo. configured which uses the reference field for clearing.
    Even if you remove the reference field from the Manual Bank Statement Variant, the system is still going to look for it because that is one fields defined for clearing in the int alg.
    You can change the config settings for the transaction, but either removing the Int alg. or using a different one. The description of the Int Alg. on the drop down list, will give you an idea of what fields will be used for clearing.
    IMG path...FA->Bank accounting> business transactions-> payment transactions>manual bank statement-> Create and Assign business transactions.
    Hope this helps.
    Thanks,
    Uma

Maybe you are looking for