Error while posting from runtime workbench

Hi all,
My scenario is idoc-idoc(One SAP system is sending data to another SAP system through XI as an idoc).
I am trying to test the scenario by posting the idoc data in RWB -> Integration Engine but its showing me an error:500 Error during Sender Agreement Determination. Hence I have tried it by removing the sender agreement in the configuration. Still i am facing the same problem.
Can anyone suggest what could be the reason for this error?
Note:Service pack:17
Java version:1.6.0_07

Hi,
Check whether you have created the RFC Destination of Type 3 from R/3 Sender system to PI and same from PI System to Receiver R/3. Along with this check the following For both systems(Sender/Receiver)
- Logical System
- Port
-Partner Profile
There is no need to configure Sender Agreement and Sender Communication channel since its IDOC.
Regards,
Prasanna

Similar Messages

Runtime error while posting a document (FB70/FBS1)

Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?

Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error while posting asset aquisition

Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanuja

Hi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS

Error while posting sec.HighEd cess (1%) in J1iin.

we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such comments

Hey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda

FA Retirement- 21151: error while posting asset document: '100000039'

Hello Experts,
I have a client who encountered this error during fixed asset retirement - scrapping.
After selecting the asset to be retired, sap did not assign an account in the account column, but the user
was able to save the document. After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'. The document number the systems is referring to is the last document saved but sap did not assign an account code.
Please help. My client is using sap b1 8.81 patch5.
Regards,
Luz

Hi Too Mui Hwee,
What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
Thanks

Error while posting IDoc

Hi,
i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.

First ,
check the partner profiles in R3,
i.e. a logical system is defined for XI , particluar Message type is added on inbond side and selected the releavnt messge type and and process code. this is all in WE20.
defining a logical system is in SALE.
then ditribute u r the model in BD 64
once every thing is OK in R3
on PI.
create a RFC destination of type R3 which points to R3 , try remote log-on .
this will be used in receiver chaneel
and check u r receiver chaneel is defined under Business system of R3, and BS refers to same client where partner profiles are defined.
and one of the following should be in place.
check 'apply control record from payload' if ur explictly passing Control record from mapping
otherwise,
check sender service and receiver service in Receiver agreement and select appropriate systems.
Regds,
Suresh

Error while posting inventory

hi all,
I got an error while posting Inventory at plant level.
error:
parameters for plant is not maintain for inventory management.
Field VM07M-ANZGEB. does not exist in the screen SAPMM07M 0410
Field VM07M-GEBEH. does not exist in the screen SAPMM07M 0410
is these config issue?
and how we can do config to resolve this issue.

You have to maintain Plant Parameters from Inventory side as well in consumption based planning side.
check out the path,
SPRO>Materials Management>Consumption Based Planning-->Plant Parameters,
also
SPRO>Materials Management>Inventory Magnt and Phy inv.
-->Plant Parameters.
Copy, from existing Plant.

Error while posting the CREMAS03 Idoc

Hi
I a getting the Error while posting CREMAS03 idoc from File
The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
but when i cheked with the functional guys , the comany code exits..
Any one have any idea
SV

Hey,
    seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.

Error while posting FPSEC1

Hi everyone,
Please guide me how to correct the following error:
While posting SD Request through transaction code: FPSEC1, we are facing an error message, 'document is transferred without Main and Sub transaction'.
Please guide.
Thanks and Regards

Hi Prudhvi,
Please check whether the main and sub transactions for which you have defined the account assignments are assigned correctly with the internal main and sub transaction.
And for the error 2, please maintain the reconciliation group id for your user id in the IMG path>Financial Accounting>Contract Accounts Receivable and Payable>Basic Functions>Postings and Documents>Document>Define Default Values>Maintain Rules for Reconciliation Key Default Values>Maintain Reconciliation Groups for Default Values.
You should define the reconciliation key group for the user id because posting the security deposit requires a reconciliation key to post the statistical security deposit request in FICA. The reconciliation key is generated automatically using the reconciliation key group assigned for the user id. You will not be able to edit the reconciliation key from FPSEC1.
Thanks,
Sakthi.

Error while posting Travel advance

Hi Experts,
while posting travel expense to FI in PRRW i am getting following error.
Post from posting run 0000000049
E RW609 Error in document: TRAVL 0000000052 AEDCLNT220
E F5354 Account 11301400 in company code 1000 cannot be directly posted to
Posting run 0000000049 could not be posted
Please let me know how to solve this error.
Thanks and Regards,
Shilpashree

The error implies that the GL head 11301400 cannot be posted to the company code 1000. Pl ask your AP /FI team to extend the GL to the company code.
Good luck,
Nandagopal C

DPM encountered an error while reading from the recovery point used for recovery.

Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.

Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Error while posting from runtime workbench

Similar Messages

Maybe you are looking for