Error while posting goods in MB1C

Hi All
I am trying post goods mvt type 561 in t-code   'mb1c'   . I am geting an error message saying:<b>Field selection for movement type 561 / acct 799999 differs for Vendor goods    
movement (014)  Message no. M7093. </b>   I am sure that there is some FI configuration    
is missing.  Please guide to setup FI side configuration for this issue.
Thanks
Prasead K

hi prasad,
try TCODE:OMWB
and give material number to which u want post goods
in movement type field give 561 and enter
then select account assignments button
next screen select screen layout button
here u can find the difference field selection for the gl acc and mv type so correct them.
definitley this will solve ur problem
thanq
sandhya.
Message was edited by:
        sandhya reddy

Similar Messages

  • Runtime error while posting goods in MB1C

    Hi,gurus
    When in MB1C i am trying to post goods.While saving i got message 49 number ranges should be defined.I done it clear in FBN1.So when i am saving posting goods i am getting runtime dump error.So how can i solve this problem
    Regards,
    Suresh

    Please Ensure you have Maintained No ranges in FBN1 & OMBT.
    Go to OMBT and Check whether No Ranges are assigned for Group Material Documents for Goods Movement and inv Diff.
    Regards,
    Ashok
    If the Problem Persists, Please Contact your abaper.
    Regards,
    Ashok

  • Problem while posting goods thru MB1C

    Dear Friends,
    Iam practising in IDES. While posting goods thru t.code MB1C, iam encountering 2 error messages.
    1. Posting only possible in 4/2008 & 5/2008 periods only.
    2. Posting period 005/2008 is not open.
    I believe there are few MM settings to be done for this,.Kindly help in this reg.
    Points assured
    KrIshna C

    Hi,
    Use the T code: MMPV
    give your company code and year
    select open and close periods
    execute
    it will close for that month
    keep repeating those steps until you reach your current period
    this should solve your problem
    Award points if you find this info useful
    Regards
    saprules.

  • Error while posting goods receipt

    Hi All,
    I am getting error message while posting goods receipt.
    The error says posting only possible 2007/06.....
    Thanks in advance
    kumar

    Go to MMPV give your company code and the period and the fiscal year and execute.
    Regards'
    Navin

  • Error while posting material  in MB1c

    Hi
    how to open finace period in OB52 for period for 002/2009 as am getting error while posting in MB1c the error which am getting are period 002/2009 is not open for account type s and G/L 799999.
    Kindly help.
    Thanx.

    Hi Mukesh
    In OB52, you dont specify the GL account, you just open periods for the sub modules within FI.
    However, If you are getting an error while posting MB1c it must definitely be due to the MM periods not being opened
    Please go to MMRV - input your co code, and execute, it will tell you the current period which is open
    If your current period is not open, go to MMPV, input ur co code or codes, enter the new period and execute.
    This should solve your problem
    Rukshana

  • Error while posting Goods issue for the reservation

    Hi,
    I am getting an error while trying to post the Goods Isuue for the reservation using MIGO transaction. The error is 'Level AR belongs to cash position (source symbol PSK)'.
    Please help me in solving this if anyone has any idea, let me know what am I supposed to do.
    Regards,
    Lavanya.

    Hi
    I think Cash Management (TR-CM) module implemented in your system.Please post this in Finance forum.
    Regards
    Ramakrishna

  • Auth error while post good receipt thru vl02n

    Hi,
    During Post good receipt thru t-code vl02n i am facing error as - "You have no authorization for this transaction with movement type 653"
    In the role i have given auth for vl01n,vl02n and vrre
    So pl guide to resolve this issue

    Hi
    please perform the transaction again. On error type /osu53 in transaction window. System will open new session and you will get details of Missing Authorizations. Give it to your Basis person to grant those missing objects.
    enjoy
    Atul

  • Error while posting Goods issue

    Hi,
    I am trying to do a PGI for a delivery.It first goes to the "Detailed data for Handling unit XXXXXX" Screen and then if I click BACK , it goes to " Display Handling Units " Screen and then gives me an error :
    Risk of posting several mat. documents for one
    delivery->long text
    It gives me an option for EXIT.
    Please let me know how to handle this error.Any inputs in this regard will be helpful.Thanks.
    Regards,
    Raj

    Hi Priya,
    I was also encountered similer problem while creating a sales contrct using BAPI.
    First of all check if you have got any notification on your SAP Buisness workplace (SBWP).
    Check whether all required data are filled.
    check for any customization which is creating any problem.

  • ERROR  while posting Goods receipts

    Dear ALL,
    While doing GR i come across the following error.
    Update control of movement type incorrect (entry 101 _ X _ B)
    where to check for this. please advice me.
    TIA
    kogi

    Hi,
    Is it a GR posting against Stock transport order?. Then go for IMG - MM - Inventory management & physical entry - Movement types - copy, change movement type - select mvt type 101 - goto Update control / WM mvt type - maintain Mvt indicator B & receipt indicator X for Mvt type 101.Otherwise directly goto Tcode OMJJ & do it.
    Hope the above said will do the needful.

  • G/L Account blocked Error while posting goods delivery in VL02n transaction

    Our Requirement is to change the G/L account which is  proposed by  OBYC(automatic account determination ) as per the movement  typ and order reason from a Ztable. We need a place to code this logic before this OBYC check happens due to which we getting the account blocked error.
    Please suggest some user exit or enhancemnet point where we can place this logic.

    hi Ramki.,
    I had configured  a Surcharge on delivery in the condition type to be calculated on the qty delivered. Say for every Gallon, a surcharge of 0.2 cents is charged. I had maintained ths surcharge as a separate condition type and assigned it to a separate G/L a/c.
    Now during PO creation, in the header , the price remains the same as i give for the Unit price.
    IN the conditions tab in Item level, the surcharge is added on to the gross price and i get a Net Price.
    Without saving the PO, when i go to see the Print-preview, i see only the Gross price.
    After saving the PO, in print review, i see
    1. Unit gross price under Sl.No.1
    2. After the Item description, immediately, there is qty ordered x unit price + surcharge and them following  Nett price
    3. At the bottom right corner of the PO, i get qty ordered x unit price only . Surcharge amount does not appear.
    How do i get the Total Nett price i.e qty ordered x unit price + surcharge to appear on the bottom right of the PO.
    Is it a standard functionality for the Total price to appear or does it involve the role of ABAP programming.???
    Do clarify my doubts
    Tx
    MahesH

  • Error while posting Goods Issue for an STO

    Hi All,
    I have created a Stock Transport Order for Plant A to Plan B and when I go to transaction VL10D and try to create a delivery for my STO then it gives the following error message
    ARun type  does not exist
    Message no. 8J103
    How do I overcome this.

    Please read OSS note 1287602.

  • Error in posting Goods Issue wrt Reservation

    Hi experts,
    System gives following error while posting Goods issue wrt reservation
    Message No - M7093
    Fld selectn for mvmt type 261 / acct xxxxxx differs for Fund (xxx)
    Then, I checked following things
    1.  RM07CUFA (SE38) report shows that
    "fund" field in Mvt type 261 field selection control is OPTIONAL ENTRY
    "fund" field in  G/L acct xxxxxx field selection control is HIDDEN
    2.  In OMJJ,   i did not find field " fund " for Mvt type 261
         In OBC4,  i did not find field " fund " for a/c xxxxxx (group Z012)
    How to resolve the problem?
    rgds,
    jay

    Thanks for your reply.
    In SE38 , I run Program RM07CUFA with Movement type 261 and Company code and GL account.
    Here it shows Fund field selection controls are different in Mvt type & G/L account
    But,there " fund"  field is not displayed to change its field selection control , neither in Mvt type nor in GL a/c.
    pls help me out
    Regards.
    jay

  • Error-while posting the goods in plant

    Hi,
    i got error message like this while posting goods in the plant with t.code MB1C
    "Account determination for entry INT GBB_______ BSA 3100 is not possible"
    can any one know about solution for this error
    Thanks&regards
    kishore kumar

    hi
    Hi,
    Use t.code:OBYC, enter chaart of account
    Click GBB
    In next screen enter Val. Gro. Code, Acct Gro. Code, Valuation class and G/L accounts for Dr & Cr and save.
    Note: before that u have save the Rules
    How to save Ruls:
    OBYC-> enter chart of account-> Click BSX->Click “Rules”
    Select the check box of Debit/Credit in accounts , General modification, Valuation Modification, Valuation class “Account are determine based on” TAB and save.
    Regards,

  • Error while posting mb1c

    He seniors,
    I am getting error while posting stock in T. code- MB1C
    Error- G/L account 799999 dose not exists in company code.
    dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
    thanks......

    Dear Sundyeep,
    As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
    CHART OF ACCOUNTS (MOST URGENT)
    Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
    Thanks,
    Davinder
    Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM

  • Error while Posting GR or GI

    Dear All.
    I am getting the below error while posting a Goods Receipt / Goods issue, Kindly suggest what could be wrong ??
    "You are not allowed to post manually in the substitute system
    Message no. FDM_MIRROR301
    I am trying to post the GR against a standard PO and trying to make GI against standard outbound delivery
    Best Regards,
    Santosh Kumar B V

    Hi Santosh,
    I believe you are using the FSCM - Collections module.
    This clearly looks like a program error.
    There are various SAP notes for the FDM_MIRROR errors. I have searched a few but could not make anything with number 301.
    This to me looks like a new error and you may report the same to SAP for a note.
    Thanks
    Aravind

Maybe you are looking for