Error while posting inventory
hi all,
I got an error while posting Inventory at plant level.
error:
parameters for plant is not maintain for inventory management.
Field VM07M-ANZGEB. does not exist in the screen SAPMM07M 0410
Field VM07M-GEBEH. does not exist in the screen SAPMM07M 0410
is these config issue?
and how we can do config to resolve this issue.
You have to maintain Plant Parameters from Inventory side as well in consumption based planning side.
check out the path,
SPRO>Materials Management>Consumption Based Planning-->Plant Parameters,
also
SPRO>Materials Management>Inventory Magnt and Phy inv.
-->Plant Parameters.
Copy, from existing Plant.
Similar Messages
-
Error while posting batch managed stock in 107 movement type?
Hi All,
Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
regards,
SanjanaHi,
spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
107 SGTXT
107 WEMPF
Check here 107 mvt type there or not if not then put.
101 CUSTNAME
101 GRUND
101 SGTXT
101 WEMPF
102 SGTXT
102 WEMPF
103 SGTXT
103 WEMPF
104 SGTXT
104 WEMPF
105 SGTXT
105 WEMPF
106 SGTXT
106 WEMPF
107 SGTXT
107 WEMPF
108 SGTXT
108 WEMPF
109 SGTXT
109 WEMPF
110 SGTXT
110 WEMPF
Regards
Rakesh -
Error while posting a write up for asset belonging to affiliated company
Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
PragyaHi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya -
Error while posting depot excise invoice
Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tusharhello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni -
Tax code error while posting Planned delivery costs in Import Scenario
Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
DurgaIs you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan -
Error while posting the parked document in ECC 6.0
Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks. -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu -
Error while posting asset aquisition
Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanujaHi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS -
Error while Activating Inventory record in WM
Hi All,
I am getting an error while activating Inventory record using LI02N ,The Inventory record has been created using LICC Cycle Inventory at Quant Level.The error detrails are as below:
Message Text:
Function code cannot be selected
Technical Data
Message type__________ A (Cancel)
Message class_________ BL (Application Log)
Message number________ 001
Message variable 1____ Function code cannot be selected
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 4 (Additional information)
Sort criterion________
Number________________
Thanks you all in Advance.
Regards,
NVKI am encountering a similar error whils tryng to create or display WM Physical Inventory documents.
Tx: LX16 - Error Message no. BL001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Tx: LI01N and LI03N u2013 Error Message no. L4001: u201CWarehouse number WH1 does not exist (check your entry)u201D
Errors when trying to create or display PIs, but can run reports on u201CWH1u201D and configuration looks ok?
I cannot find anthing n SAP OSS for WM.
Any assistance would be appreciated. -
ErroR while posting J1IH (TR6)
Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS Dr 2000
SECS Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil KumarThe profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar -
Hi,
I am getting the below error while posting Vendor invoice FB60. Please help me...
Constant ! for Ledger ZWN00 does not contain any value*
Message no. GLT2301
Thanks
KishoreHi,
May be the company code assignment to specified special purpose ledger have the real time posting.
VVR -
Error while posting sec.HighEd cess (1%) in J1iin.
we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such commentsHey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda -
Error while posting 561 Document
Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar -
Runtime error while posting a document (FB70/FBS1)
Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa. -
Error while posting usint tcode f-02 in fi
Hi all,
I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document but while saving it gives me the following error message:
Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
Message no:f1030
DIAGNOSIS:
The application has accessed a funds management or cash management module with parameters messing or defective.
PROCEDURE:
Notify your system administrator.
Hope some body would help me out.
ThanksHi,
Not sure if this works out
try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
double click on company code and see if any thing is assigned in the feild to FM.
regards
genie
Maybe you are looking for
-
I forgot my answers to my security questions and I have not received the email to reset my answers
I check my email and yet no email has been sent and I know I'm using the same email as my Apple ID.
-
JRE 1.4.2 not detected on another user account
We are using HOD V7 and I need to test something with java JRE 1.4.2_13. When I install the software (with an admin account) then loging with the user account, HOD tell me that he didn't detect any java version. When I try the same thing on the admin
-
Roberto or other guys please help with the terminology!
Hi Roberto, when you say In addition to V1 and V2 update, synchronous and asynchronous update from the application documents, you have to perform the V3 update (to download your records from delta queue to extraction queue) that you can schedule , I
-
Fixing the range of data series axis of analytical chart
Hi all, I developed the analytical chart and every thing is working fine. I set the value of property range of analytical chart to 'fixed' but that range still varying basing the data displayed.
-
Couple of months ago I switched from MacMail to Thunderbird. The transition has gone pretty well, but I am less than enamored of T-bird Toolbar button (named Write) that you use to compose a new email. I would prefer it to be named "Compose". So I wa