ErroR while posting J1IH (TR6)

Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr  25000
    to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr  25000
Basic Excise Duty A/C Dr 22000
ECS                            Dr 2000
SECS                          Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil Kumar

The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar

Similar Messages

  • Error while doing J1IH (Excise JV) - TR6 Challan posting

    I am getting the following error while doing,  J1IH (Excise JV) - TR6 Challan posting
    Please assist....
    Short text
        The COMMIT WORK processing must not be interrupted.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLFACS" had to be terminated because it h
        come across a statement that unfortunately cannot be executed.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        During the COMMIT WORK statement, the following are executed:
        - the routines registered with the statement PERFORM .. ON COMMIT,
        - the registered methods for the events of the object services
          and
        - possibly the local update (SET UPDATE TASK LOCAL).
        An exception was raised and caught. The normal sequence of the routines
        was interrupted by this resulting in the program being continued before
        the call of COMMIT WORK. As this can lead to inconsistencies, the
        processing cannot be continued in the normal way.

    Thanks Milind...
    I am also getting the following error:
    Balance in transaction currency
        Message no. F5702
    Diagnosis
        A balance has occurred in transaction currency 'INR' with the following
        details:
        Exchange rate '00', amount '       500,000.00' and currency key 'INR'.
        The data in the transaction currency were transferred from the calling
        application.
    System Response
        Your data cannot be processed in FI.
    Procedure
      The error is probably in the calling application.
    Please assist

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

  • Error while posting depot excise invoice

    Dear SAP Experts,
    We are continually facing the following error while posting "Depot
    Excise Invoice" on Production sever
    "Error in allocating Depot Invoice number interval not found Number
    object J_1IDEPINV"
    Message no is 8I336
    We have already maintained the number interval for the above object i.e
    J_1IDEPINV with respective series group 62.
    Here is the business process:
    1. First, we make transfer posting thr’ MB1B. We get material doc no
    2. Second, we make selection for RG23D for this material doc thr’ J1IJ.
    RG 23D register gets updated
    3. Third, we make ‘verify/post’ thr’ J1IJ itself. Here we are getting the
    error when we post it.
    Please do needful.
    Its an urgent isue
    Regards
    Tushar

    hello,
    In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
    Regards
    Kedar Kulkarni

  • Tax code error while posting Planned delivery costs in Import Scenario

    Hi!!!!!
    I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
    "Tax code V0 country IN does not exist in procedure ZAXINN"
    For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
    While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
    Please let me know what config is missing.
    Regards,
    Durga

    Is you ZAXINN assigned to the country India
    and is your taxcode (created in FTXP) created for country India?
    kr
    hakan

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error while posting parked documents

    HI ALL,
    After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Please check it.
    Thanks!

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Error while posting asset aquisition

    Hi to All,
    I am getting following error while posting aquisition entry.
    "Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
    I had made all settings what the error says above but still error persists.
    PLEASE ITS VERY URGENT
    tanuja

    Hi tanuja,
    Please check the setting in the T- code OABT.
    If it helps pls reward some points.
    JS

  • Error while posting FB60 -

    Hi,
    I am getting the below error while posting Vendor invoice FB60. Please help me...
    Constant ! for Ledger ZWN00 does not contain any value*
    Message no. GLT2301
    Thanks
    Kishore

    Hi,
    May be the company code assignment to specified special purpose ledger have the real time posting.
    VVR

  • Error while posting sec.HighEd cess (1%) in J1iin.

    we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount ' 0,10' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    and.....
    System failure during locking GLaccount 1001 by 21150105
    Message no. 8I076
    reply me.  Text Removed
    Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
    Please dont add such comments

    Hey,
    I have already replied to your thread for F5702 error.
    G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
    Regards,
    Brinda

  • Error while posting 561 Document

    Dear All
                Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
    Even OBYC setting for that valuation class already assigned.
    please advice.
    Regards
    Kumar.

    Hello Anandhakumar ,
    please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
    and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
    it could solve your query.
    regards,
    Ninad Kshirsagar

  • Runtime error while posting a document (FB70/FBS1)

    Hi
    I am getting a runtime error while posting a document through FB70 or FBS1 .
    The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
    And the program dumps in Function module SO_KPRO_DECIDE.
    Has any one faced this problem?

    Hi,
    Please check the psoting date and also the reversal  date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
    Thank you,
    Shilpa.

  • Error while posting usint tcode f-02 in fi

    Hi all,
    I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document  but while saving it gives me the following error message:
    Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
    Message no:f1030
    DIAGNOSIS:
    The application has accessed a funds management or cash management module with parameters messing or defective.
    PROCEDURE:
    Notify your system administrator.
    Hope some body would help me out.
    Thanks

    Hi,
    Not sure if this works out
    try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
    double click on company code and see if any thing is assigned in the feild to FM.
    regards
    genie

  • Error while Posting Document in FBV0

    Hi Guys,
    Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
    Error: "No batch input data for screen SAPMF05A 0700"   
    Kindly suggest
    Thanx and Regards
    Munender

    Also have a look at the following notes:-
    =>  Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
    =>  Note 800177 - FB01: No batch input data for SAPMF05A 0700
    thanks
    G. Lakshmipathi

  • FA Retirement- 21151: error while posting asset document: '100000039'

    Hello Experts,
    I have a client who encountered this error during fixed asset retirement - scrapping.
    After selecting the asset to be retired, sap did not assign an account in the account column, but the user
    was able to save the document.  After saving it, the user needs to retire again another asset - scrapping, but the document would not be saved because of this error: 21151: error while posting asset document '100000039'.  The document number the systems is referring to is the last document saved but sap did not assign an account code.
    Please help. My client is using sap b1 8.81 patch5.
    Regards,
    Luz

    Hi Too Mui Hwee,
    What we did is to put letters on the number so the series will continue example there is already 100333, 100334, 100335 since the error is encountered from 100333. We add 100333A, 100334A, 100335A.
    Thanks

Maybe you are looking for

  • I dont want my folder to automatically close on iPad mini. Is there any way to stop it?  It seems Apple likes you to click click click your way to the most simplest tasks

    I have folders on my iPad mini that group specific things such as weather and news in one folder, game apps in another folder etc. When I go into my news and weather, for an example, and chose a news I find when I close that news, it also closes the

  • Printing problem in ABAP report

    Hi All, I have a ABAP report with line size 225 and line count 65. We are taking print out of the report on Dot matrix printer. When taking the printouts, while going in to the 3rd page the logo on the top of the page is getting printed on the data a

  • Help in J2ME

    Hello Sir/Mam, Im Sanjeev Das from Bhilai(C.G.). Doing my B.E.(C.S.) and in final year from RCET, Bhilai.And has been selected by RISPL, Bhilai and Lambent, Nagpur mobiles companies. My J2ME training was completed from RISPL on June of calendar year.

  • Firefox Help

    I'm setting up my new iMac and installed Firefox as my internet browser. If I close all the browser windows, it won't open another window even by clicking on File>New Window or using keyboard shortcuts. I have to close the program entirely and reopen

  • Printing PDF's from Autocad, but Unable to create PDF's with layers

    I need to create PDF's where I can layer voice, data, and wireless coverage areas on seperate layers, but but have been unable to figure out how to do so. I can export and plot pdf's, but there isn't an option for creating layers, at least that i can