Error While Posting MIGO for a Suncontracting PO ..

Hi All
I have created a Subcontracting PO and then transffered the material to subcon vendor's stock. now while doing MIGO for the same PO i am getting error as :
"Account determination for entry EKCA FRN not possible"
Please let me know why this error is coming?
Anjan

Hi Pradeep
Thanks for your reply. I knew that G/L account entry in OBYC under FRN key is required but my concern is few days back I was doing MIGO successfully though same sttings were there that time also. Could please point put if any other thing is missing.
Second would like to know how system is identifying FRN key?
Anjan

Similar Messages

  • Error while posting MIGO for HU-Inbound Delivery

    Hi All
    When am trying to post the MIGO for HU Inbound Delivery Creation, am getting an error saying "Required parameters missing when calling up module MARV_SINGLE_READ". 
    Following areas I have verifed:
    The posting periods in MMRV shows current period.
    The Number range for HU ID and Delivery type HID is maintained.
    Now am looking for your expert opinion to resolve this issue.
    Regards
    K. Viswanathan

    Are you getting the same error in  transaction MB1C to create the delivery.Try in MB1C

  • Error while doing MIGO for a sub-contracted item

    Hello to Everybody,
    I am facing below problem -
    Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
    <Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
    May I request for possible solution to above error ?
    regards,

    Dear Sanjay,
    You can determine the cost object for the posting of the  costs in the transaction OKB9.
    Following thread should resolve this issue:
    Re: cost of subcontracting
    Regards,
    Naveen.

  • Cash Management Error while posting GI for the reservation

    Hi,
    I am getting an error while trying to post the Goods Isuue for the reservation using MIGO transaction. The error is 'Level AR belongs to cash position (source symbol PSK)'.
    Please help me in solving this if anyone has any idea, let me know what am I supposed to do.
    Regards,
    Lavanya.

    go to VL02n, select the delivery#,enter & Change manually the Actual GI date to current date & press post goods issue(PGI).
    Hope this would resolve your problem.

  • Error while posting Idoc for customer invoice.

    hi,
    I m posting Customer Invoice through LSMW using IDocs.
    Basic type is FIDCCP02 and message is FIDCC2.
    While posting the Idoc I m getting error as:
    'Document or line item does not exist for invoice reference'.
    I m not getting the error why it is asking for invoice reference because
    in FB01 it is not asking for any reference or anything.
    In Idoc all the item level values are coming prorperly.
    If anybody worked on such issues then please reply.
    -Thanx.
    -Umesh

    Hi Umesh,
    Try posting customer invoice through TCode - F-22. There it may be asking for reference number. Generally we post customer invoice by F-22 not from FB01.
    If you are getting error you can add reference field in your LSMW it may be mandatory in F-22.
    Ashven

  • Error while posting MIGO GR

    I am getting a very strange error while trying to post a GR in migo, the error is in the attached file, and no dump occurs, but after trying ST22 the dump is attached in the second file.
    No configuration has been changed recently, if someone can help i would greatly appreciate it.

    Please check these below notes. It seems some BADI implementation in your system is causing this:
    1776835 - Preventing inconsistencies by posting termination in MM
    1843441 - Optimizing error prevention mechanism from SAP Note 1776835

  • G/L Account error while posting MIGO: Msg no: 8i195

    Dear Gurus,
    I am posting MIGO, while posting I am getting the following error msg:
    1) G/L a/l 300030 does not exit in the chart of account INT , msg no 8i195,
    I have created the account 300030 in FS01as MODVAT clearing account, but still I am getting the same error saying account is not maintained in english language even though I have maintained EN in translation tab and I have also checked the same through Tcode FSP0.
    But still same error is persist
    FYI: I have configured the material with all CIN setting.
    Kindly help..
    Regards,
    prashanth pai

    Dear Pankaj,
    I have maintained the same with FS00 tcode, but even then I am getting the same error.
    Prashanth

  • Error while posting confirmation for limit PO

    Hi Experts,
    we are having a standalone scenario(SRM 7) and the issue is as mentioned below
    The situation is that the PO is a limit order with 2 line items. The first line item is complete and has been closed off with the u201Cno further confirmation/invoiceu201D indicators selected. However the 2nd line still has some limit remaining but the when the central confirmations attempts to enter a good receipt against the line they get an error message which is "No Confirmation could be entered for purchase order"
    please guide me how to solve this.
    regards
    smita

    Hi,
    please find furhte information.
    a limit sc is created for a value of 37000 GBP and after approval it created a PO. but the user went and added a line item directly in PO for 40000 GBP. Now the total value of SC is 77000 GBP.
    user has created a confirmation for 36000GBP and selected no confirmation required further.there is no issues with this lin item
    but with the second line item he posted confimation for value 37000 gbp and invoiced for 30000 GBP.
    when i am trying to post confirmation for 3000 GBP system is throwing an error that "no confirmation could be entered for purchase order"
    could any one guide me how to solve this or any suggestions for solving this.
    regards
    smita

  • Error while posting GR for subcontracting process

    Dear Friends,
    while creating a GR for a subcontracting PO, I get the following error. please suggest what to do. i checked the configuration for the movement type and could not come up with the solution.
    Fld selectn for mvmt type 543 / acct 7449990 differs for Vendor goods movement (014)
    Message no. M7093
    Diagnosis
    Comparison of the field selection strings from movement type 543 and G/L account 7449990 has revealed that there is an incompatible field selection combination at one or more points.
    Field for which the field selection is different: Vendor goods movement
    Example
    On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed.
    System Response
    You cannot post this transaction, unless you have changed the field selection adequately.
    Procedure
    Contact your system administrator.
    Action to be taken by the system administrator
    Check whether any postings resulting from this movement type are to be made to the G/L account determined automatically. If you find that the G/L account is not correct, check the automatic account determination in the Customizing system for valuation.
    Proceed
    If the G/L account is correct, use the report RM07CUFA to compare the field selection for the movement type with the field selection for the G/L account and change the incorrect settings or the field status group of the G/L account.
    Proceed

    The field is mandatory in acct 7449990 and hidden in movement type 543 or vice versa.  To check the field status for that movement type, you can run the program RM07CUFA
    Once you execute this program and found that the field is set to mandatory, then it should be mandatory for that movement type field status also.
    Alternatively, Go to txn OMJJ, click on Movement Type and execute.  There double click on "Field selection (Enjoy) and see whether the movement is maintained as Required Entry or Optional Entry.
    Now go to FS00, input the G/L Account 7449990 and execute.  There go to tab Create/bank/interest and chech whether you have maintained any value against "Field status group" and also you have checked the box for "Post automatically only".
    This should be done in consultation with FI people only if the issue is in production client.
    thanks
    G. Lakshmipathi

  • ERROR WHILE POSTING MIRO FOR MULTIPLE ACCOUNT ASSIGNMENT (ASSET)

    Hi Guys,
    We created  a PO for asset with multiple account assignment. And we immediately do IR instead of GR.
    While doing IR it is giving error
    1) Quantity delivered is zero - Warning message
    2) Account 245350 requires a Transaction Type or is Invalid - Error message
    what may be the problem. how can we eliminate and post it
    Regards
    palani

    Hi,
    I would assume the G/L account you used was not properly set up.  Did you get the same problem if you try to change to another G/L account?  Perhaps, get your FI specialist to look into this G/L account-related error and verify it.
    Cheers,
    HT

  • Error while doing migo for STO order

    hi,
    we have done migo wrt the outbound delivery number and due to wrong invoice values they have cancelled the GR and again they are going to do the GR but system is not allowing to post the document since there is an entry in rg23d table with the specified invoice number.how to cancel the rg23d entry.
    please help
    regards
    msp

    Hi,
    Cancel the Excise Invoice which is captured at the time of GR and post it.
    And do the GR with new excise invoice.

  • Error while posting GR

    Hi
    We are facing a error while posting GR for a PO, error we are getting is "Account determination for entry 1000 FR3 0002 not possible".
    now we have checked that for the mentioned plant(val area) and co code val. grp code is 0002 only, and FR3 is picked by the system because of the condition type used (which is a Z020 and manual one).
    please help.
    regrds
    Yogesh

    Hi Yogesh,
    Maintain the GL account as mentioned by Ramki that will solve your problem. Or else u must not give an customs duty charges in PO then it will not hit that particular GL and you can post the GR
    Hope this helps.
    regards
    Anand.C

  • Error while posting a write up for asset belonging to affiliated company

    Hi,
    I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
    Transaction type 790 not possible (posting to affiliated company)
    Message no. AA390
    I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
    Thanks
    Pragya

    Hi
    According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
    but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
    Is there any other way, to resolve the issue
    Thanks
    Pragya

  • MIGO error while posting..!!!

    H Alli,
    Getting below error while posting in MIGO:
    "Account 413501 requires an assignment to a CO object"
    Regards,
    Amit

    Hi
    Check whether profit centre is assigned to your material at sales general plant data
    If not , then give profit centre  and create a fresh cycle and see
    Regards
    Raja

  • Error while posting batch managed stock in 107 movement type?

    Hi All,
    Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
    and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
    regards,
    Sanjana

    Hi,
    spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
    107     SGTXT
    107     WEMPF
    Check here 107 mvt type there or not if not then put.
    101     CUSTNAME
    101     GRUND
    101     SGTXT
    101     WEMPF
    102     SGTXT
    102     WEMPF
    103     SGTXT
    103     WEMPF
    104     SGTXT
    104     WEMPF
    105     SGTXT
    105     WEMPF
    106     SGTXT
    106     WEMPF
    107     SGTXT
    107     WEMPF
    108     SGTXT
    108     WEMPF
    109     SGTXT
    109     WEMPF
    110     SGTXT
    110     WEMPF
    Regards
    Rakesh

Maybe you are looking for

  • Scrollable Frame (Swing Newbie)

    Hi, new to Swing programming and getting stuck with making a scrollable window. This was my original code which works (the base class extends Canvas so when I used panel.add(this) it is adding a Canvas: public Game() {           // create a frame to

  • Error in Maintenance Optimizer in step "Select files for component "

    Hi everybody, i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred

  • Puzzel- Method to optimize int[ ][ ]of int[ ][ ]'s

    I'm righting a class that takes an int[][], initially filled with 0 or null. A rectangular block is added to the int[][] with a value of 1 - 9. Another rectangular block is added to the int[][] with a different value from the first, usually the next

  • Partitioned machine sending requests to Master Node????

    I have a bridged configuration that is used in an unusual manner. We have 16 slaves that send requests to a service on our master and the master sends a reply back to a different service on the slave that sent the request. My question is, Is it possi

  • How to Uninstall iLife'08 ?

    I am having problems with the new directory of iPhoto'08, I want iPhoto'06 back. I tried to install iLife'06, but the iPhoto'06 was skipped. That means I have to uninstall iLife'08 first. Can somebody help me with this?