Error while posting revenue to internal order

Hi
I made an internal order for income and tried to post the revenue in that but an error is coming, That is :
Order 100040 cannot carry revenues
Message no. KO014
Diagnosis
You have tried to post an order, which is not allowed to carry revenues, under a revenue element (or the system determined the order automatically).
The field "Revenues" in the order type determines whether revenues can be posted to an order or not.  Orders carrying revenues cannot be settled to a cost center.
System Response
Order 100040 cannot carry revenues.
Procedure
You can either
enter a different order.
enter a different cost element (not a revenue element).
After that i changed the tick to the revenue also but it was not solved. please guide.
Thanks

hi
i have put a tick on the revenue posting in the control indicator and settlement profile there is Gemeinkosten- 20.
Can u tell me that where i have to select revenue for the posting and which profile shall i select, because this profile is not suitable for the revenues.
Thanks for the reply.

Similar Messages

  • Error while posting transaction to Internal order

    Hi
    We tried to make a transactions to the internal order, having available amount and we have posted the transaction less than the available amount yet received a yellow error message that the internal order budget almost exhausted. We checked the internal order budget it transaction KO22 and our prospective booking fit to the budget. But still we were unable to post because of the internal order budget. We could only solve to increase the budget with a bigger amount so we could reprocess the file.  Why is it always that the report shows budget is available but we are unable to post due to insufficient funds. Only on adding more funds we are able to post the transactions.
    Which is the correct report to view the budged is available and utilized.
    Regards
    Venkat

    S_ALR_87013019

  • Error in posting document in Internal order

    Hello All,
    One of my user is not able to post a document in a particular Internal Order
    But he can post in all other Internal Orders
    I am not able to get any solution
    Pls can anybody come out with a solution with highly appreciable
    Rgds,
    Usha

    Hello All,
    First let me thank your for your response
    Sorry i forgot to mention that some users are able to post in that Internal Order and one user is not
    Could you suggest me anyother outcome so that it gets solved at the earliest
    I'll assign points
    Rgds,
    Usha

  • "21141: Error while posting journal entry :-10 / Internal error"

    Hi All,
    I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
    Thanks in advance.
    uddin

    Hello Muhd
    Please could you go in Administartion > Set Up > Fixed assets > GL
    Account Detemination and check the settings of  'Clearing Acc. Asset
    Acquisition' account, which is used when creating Journal Entry for
    'Acquisition without vendor'.
    Could you check if there is a 'Default VAT Code' assigned to this
    account. In this case could you to clear the Default VAT Code assigned
    to this account and try to do 'Acquisition without vendor' again?
    Also,please try to check below option to see if that could help:
    1)Check asset Class Land
    2)Check GL accounts settings
    3)Check the checkbox "Permit Other VAT Group"
    Regards,
    Syn Qin
    SAP Business One Forums Team

  • How to post the revenue to internal order

    Hi guyes:
    Please can anyone tell me how to post the revenue to internal order when i invoicing using VF01.
    i have already tested,i enter the internal order in the TAB 'Account assinment' when VA01.
    but i seem to post the sales cost to the internal order but not revenue.
    Can anyone tell me how to resolve it?
    Thank you!

    Hi,
    You seem to be doing the right thing. Once you have posted the billing document. Can you please go to vf02 and check in the item detail tab if the internal order you have entered in va02 is there.
    Thanks
    Rachelle

  • Tax code error while posting Planned delivery costs in Import Scenario

    Hi!!!!!
    I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
    "Tax code V0 country IN does not exist in procedure ZAXINN"
    For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
    While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
    Please let me know what config is missing.
    Regards,
    Durga

    Is you ZAXINN assigned to the country India
    and is your taxcode (created in FTXP) created for country India?
    kr
    hakan

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error while posting parked documents

    HI ALL,
    After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Please check it.
    Thanks!

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Segment derivation when posting invoice on internal order

    Dear colleagues,
    I have configured the New General Ledger in SAP ECC 5.0, with profit center and segment as splitting characteristics. Document splitting and segment derivation are working fine for almost all scenarios, but not for all scenarios.
    When a post a vendor invoice with FB60 to only a cost center document splitting and segment derivation are working correctly: the segment is derived from the profit center (which is assigned to the cost center in the master data of the cost center) and I can post the invoice.
    However, when I post the vendor invoice to both a cost center and an internal order segment derivation does not work: I get the error message GLT2201 "The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting."                         
    The reason for this is that the posting on the cost center becomes statistical and the posting on the internal order is the actual posting. In the master data of the internal order I have not defined a profit center. Because of this the DUMMY profit center is assigned to the line item.
    I have assigned all profit centers to a segment (in the profit center master data), except for the DUMMY profit center. I guess this is correct?? I can easily solve this issue by assigning the dummy profit center to some kind of dummy segment, but I don't think this is the correct solution.
    A solution might be to enter a profit center in the master data of the internal order (segment can then be derived from this profit center). However, I prefer not to put a profit center in the master data of the internal order.
    Does any of you have experience the same kind of problem? Can anybody give me some advice how to derive the segment correctly in the aboven mentioned posting? Did I do something wrong in the customizing?
    Thanks for your help in advance!
    Regards,
    Koert

    I have already found the solution myself. In the customizing you can define a default segment that will be used in case no segment can be derived in the posting.
    IMG: Financial Accounting (New) --> General Ledger Accounting (New) --> Business Transactions --> Document Splitting --> Edit constants for nonassigned processes
    Regards,
    Koert

  • Error while posting sales f-22

    Error while posting sales F-22
    Cost center 1000/150020 is Blocked againest revenue postings on 03.11.2008

    Hi,
    In your document you have cost centre assigned on revenue line. You have to unlock it for posting revenues: go to KS02 - Control - and unlock the actual revenues flag.
    Regards,
    Eli

  • Error while posting journal entry: -5012/unbalanced transaction

    Hi everyone,
    I got this error message when trying to add a FA Retirement.  FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
    FA G/L Account Determination is completely defined.
    Would appreciate any reply.  Thanks in advance!
    Jac

    Hi Jac,
    1, There is a known issue in a lower version before  2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
    21141 error while posting journalentry: -5012 /Unbalanced Transaction.
    If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
    2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
    Account Determination.
    There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
    1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
    2) Select an Account Determination Group;
    3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
    3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
    4) Empty the field 'Default VAT Code';
    5) Execute the Retirement functionality again.
    You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
    I hope it is helpful!
    Regards,
    Ivy Zhang
    SAP Business One Forums Team

  • Error while posting FPSEC1

    Hi everyone,
    Please guide me how to correct the following error:
    While posting SD Request through transaction code: FPSEC1, we are facing an error message, 'document is transferred without Main and Sub transaction'.
    Please guide.
    Thanks and Regards

    Hi Prudhvi,
    Please check whether the main and sub transactions for which you have defined the account assignments are assigned correctly with the internal main and sub transaction.
    And for the error 2, please maintain the reconciliation group id for your user id in the IMG path>Financial Accounting>Contract Accounts Receivable and Payable>Basic Functions>Postings and Documents>Document>Define Default Values>Maintain Rules for Reconciliation Key Default Values>Maintain Reconciliation Groups for Default Values.
    You should define the reconciliation key group for the user id because posting the security deposit requires a reconciliation key to post the statistical security deposit request in FICA. The reconciliation key is generated automatically using the reconciliation key group assigned for the user id. You will not be able to edit the reconciliation key from FPSEC1.
    Thanks,
    Sakthi.

  • Impute revenue to Internal Order from SD

    Hi Experts,
    Is it possible to impute revenues to Internal Order from SD? Is necessary some configuration?
    Thanks in advance.
    José Luis

    If your cost of sales account is not setup as a cost element (which it shouldn't be if you are using cost based COPA), then you will need to created another cost of sale G/L account which does have a cost element and use that account for this transaction.  The G/L account that is selected for cost of sales is based on the movement type selected in the sales transaction and the valuation class assigned to the material.
    The easiest way of having the system find a different G/L account for this is to use a material in the sale transaction with a different valuation class that can be assigned to this new G/L account.  You can use transaction code (FBKP) to assign the G/L account to the correct account modifier for that valuation class.
    If you can't use a different valuation class (because this material is used in other situations as well), then the process is more complicated.  You will need to have the sales transaction find a different movement type for this so that you can assign a different account modifier and G/L account.  You will probably need to work with your S/D consultant to make this work, but I'll take you through some of the steps.
    In the standard system, movement type 601 is usually used to issue the inventory against the delivery and record the cost of goods sold accounting posting.  The trick here is to assign a different movement type to this speicific transaction.  The movement type is assigned to the schedule item category that is assigned to the sales line.  The schedule item category is derived from the item category, so you may need to have your S/D consultant create a new item category, a new schedule item category, and a new movement type for you.  Now that you have a new movment type, you assign a account key and modifier to the movment type.  From there assign the correct G/L account to the account key and modifier for your valuation class.
    thanks,

  • Reasons  for  not  up dating the  planned revenue in internal order

    Dear   CO experts
    What  are the probable reasons  for not up dating the  the  planned revenue in  internal order . Eg  :  The order   value in CRM order  is not  flowing  to the  planned  revenue  in   internal order . The  GL  has  been  defined  for the  same in ECC and  CRM .
    What are  the points to be  checked if  the  planned  revenue  does not update  the  internal order.
    Where can i  find the documentation for  the  settings  of  CRM    to  ECC controlling.
    Regards   
    Raj

    Hi,
    Check in KOT2_OPA corresponding to your order type whether 'Revenue posting' is flagged.
    With regards,
    Mrinal

  • Error has occurred when running internal order report

    Error has occurred when running internal order report. Last month also used this report without any error.
    Error #01: [ASE Error SQL422]Too many nested expressions or logical operators to compile. Try splitting query or limiting ANDs and ORs.
    Error #02: SQL Error: 422
    Error #03: An error occurred while reading the data; Navigation is possible.
    Please guide me to solve this issue.

    Please just say how you removed the CC version and did you remove the Preferences from Hidden User>Library??
    https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
    In here??
    Sorry I'm trying to help but please answer the questions specifically... thanks.

Maybe you are looking for