Error while posting stock
Hi,
I am trying to do stock posting in MB1c and getting the error as below:
"field selection for movement type 501/ acct 893025 differs for business area 033"
Please suggest.
Regards,
Naveen
Hi,
it will due to the cross field selections in movement type 501 and field selection for gl acct
any one of it have entry as required and one might not have
go to that acct in FS00 check the create/blank tab here see what you have in Field status group
now go to OBC4 here for your company code make business area mandetory or optional for that Field status group
Please check tcode OMJJ , dialog structure field selection. Add gsber in field selection table
Regards,
pardeep malik
Similar Messages
-
"Check Business Area of the company code" error while posting stock
Hi Experts,
While posting stock to a storage location of a plant , the system is giving me the following error message :
"Check Business Area of the company code" .
Would highly appreciate if I could get some info for this error message and how to resolve the same.
Thanks & regards
Vikas Halihi
i think division is missing in material master basic data , please enter division in basic data tab in material master then you will try ,
then post the stock
regards
vijay -
Error while posting stock from quality to return delivery
Hi ,
I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
"Posting only to free or blocked stock due to missing goods receipt".
Please let me know if i am missing any thing in config......
Thanks
IlyasHi Ilyas,
Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
reg,
Sudhir -
He seniors,
I am getting error while posting stock in T. code- MB1C
Error- G/L account 799999 dose not exists in company code.
dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
thanks......Dear Sundyeep,
As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
CHART OF ACCOUNTS (MOST URGENT)
Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
Thanks,
Davinder
Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM -
Error while posting batch managed stock in 107 movement type?
Hi All,
Error while posting batch managed stock in 107 movement type in MIGO, like 'Goods movement not possible with mvmt type 107'
and here in batch tab batch number is not displaying only valuation type is displaying, kindly let me know can it be done by doing any change in field selection with respect to 107 movement type
regards,
SanjanaHi,
spro-inventory management-setting for enjoy transaction-setting for goods mvt--field selection per mvt type
107 SGTXT
107 WEMPF
Check here 107 mvt type there or not if not then put.
101 CUSTNAME
101 GRUND
101 SGTXT
101 WEMPF
102 SGTXT
102 WEMPF
103 SGTXT
103 WEMPF
104 SGTXT
104 WEMPF
105 SGTXT
105 WEMPF
106 SGTXT
106 WEMPF
107 SGTXT
107 WEMPF
108 SGTXT
108 WEMPF
109 SGTXT
109 WEMPF
110 SGTXT
110 WEMPF
Regards
Rakesh -
Error while posting a write up for asset belonging to affiliated company
Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
PragyaHi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya -
Error while posting depot excise invoice
Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tusharhello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni -
Error while creating stock using tcode: MB1C
Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not existHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
Tax code error while posting Planned delivery costs in Import Scenario
Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
DurgaIs you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan -
Error while posting the parked document in ECC 6.0
Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks. -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu -
Error while posting asset aquisition
Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanujaHi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS -
ErroR while posting J1IH (TR6)
Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS Dr 2000
SECS Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil KumarThe profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar -
Hi,
I am getting the below error while posting Vendor invoice FB60. Please help me...
Constant ! for Ledger ZWN00 does not contain any value*
Message no. GLT2301
Thanks
KishoreHi,
May be the company code assignment to specified special purpose ledger have the real time posting.
VVR -
Error while posting sec.HighEd cess (1%) in J1iin.
we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such commentsHey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda
Maybe you are looking for
-
Create Settlement rule for L2 WBS via CJB1/2
Hi Everyone In the past we have settled WBS elements to either PSG/CCtr/AUC. We now want to have WBS hierarchies where the lower level WBS element will settle up to the superior (Level 1) WBS element. I have configured the following items in EEC 6.0:
-
Installed Yosemite. QT Has Question Mark When I launch An Inbedded Video
iMac - recently installed Yosemite I have videos embedded on the site Actors Access. I always use Safari. All the videos except the latest one that was upload through Actors Access work fine. The last one uploaded when previewed launches the box with
-
Une page web publicitaire s'ouvre toute seule et ouvre même mon navigateur si celui-ci n'était pas ouvert. Je souhaiterait empêcher ces pages web de s'ouvrir en les mettant dans une liste de sites interdits. Mais je ne sais pas si on peut faire cela.
-
So i will try to explain it as i can . So I have this flash game. In it there is one movie clip called address_group. In address_group i have another MC called address. In address i have many text fields. Their info is being loaded from a xml file ca
-
Adding Essbase Server access to Planning Application group
Hi All, How we can add Essbase server access to Planning Application group in Shared services ? Pls. advice