Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Similar Messages

  • Error messege BP603 while posting the parked document budget exceeded

    Hi ,
    We are having the budget function and its for overall release.
    Budget has been relased and assigned value is less then the released budget in all conditions.
    Its throwing the error messege No BP603  while posting the parked documents. Unable to understand the reason why its behaving.
    Please let me know if anybody has faced such problem.
    We are into ECC6, EHP 4 and the SAP note 557431 is not going to help anyways.
    Regards
    N.Raju

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • While posting the parked document, we are getting the error Message No.0034

    Dear Experts
    First we created Parked Document.
    After that when we try to post above said parked document, we are getting the below error:
    "Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Procedure
    Check your batch input data."
    Can any of you please provide the solution.....
    Thanks and Regards
    PVSRG

    But if you clearly observe the error which you have got, it says the Budget period is not on the screen.
    Check and try once again
    "Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Thanks

  • Error 'Specify account number' while posting a parked document through FBV0

    Hi,
    I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
    I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

    Hi,
    Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
    Try same scenario in the development its be useful
    Regards,

  • Withholding tax Amount not being displayed in the Invoice while posting a Parked Document

    Hi,
    I have created a parked document for the Vendor who has the Witholding tax code w9 - 15% . I created Parked Document using FBV1 and then tried posting the same using FBV0.Somehow I am not getting the Withholding tax Amount in the FI Document created. However the W/Tax Base Amount and the W/ Base LC are being displayed correctly.
    Say if the Line item Amount is 1,000$ then both the amounts mentioned above in the Additional tab "Withholding tax Data" are being displayed as 1,000 usd but the W/Tax Amount is 0,00 USD.
    2. Also We have the PI and the Interface is written to post the Parked document while the xml file. There is a Method Execute_Asynchronous which has two BDCs one  for FBV2 ( Change Parked Document ) followed by the Post Parked Document FBV0. Hence When I try to post the Parked Document using the SPROXY Interface which has two BDCs Viz FBV2 & FBV0 I still get the Invoice with the Same Amounts and at times with additional 2 zeros added to it in the Additionsal Tax Data Screen.
    I am not sure what is the reason for this. Can anybody help  me sort out this Issue.
    Can there be any Config issues. Please let me know what all config Settings we need to do to sort out this Issue.
    Also let me know why the 2 Zeros are getting added to the Base Amount e.g if the Vendor Line item is 12,000 USD it shows as 12,00000.00 in the Withholding tax Data  Tab in the Invoice.
    Regards,
    Deepak.

    Dear Praveen,
    please check into IMG if You defined the WT type You are using for Your Comapny code:
    IMG --> Assign Withholding Tax Types to Company Codes
    I hope this helps.
    Mauri

  • Error While Releasing the Billing Document Msg No. KE/AD 243

    I am getting error while releasing the billing document
    Error No KE/AD 243
    This error comes in particular billing document only others are posted correctly.
    Rgds
    Dhiraj

    Dear Anil
    We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
    Rgds
    Dhiraj

  • Post the Park Document

    Hi,
    When we post the park document, the following error Message showing.
    No Batch Input data for Screen SAPMF05A 0302
    What is the problem and how to solve this?
    Thanks in advance

    Hello,
    Refer SAP Note 1226243 - Parking the fields BSEG-VERTT, BSEG-VERTN, BSEG-VBEWA
    Regards,
    Ravi

  • Error in posting the park doc

    SAP EXperts,
                             I created 1 AUC account, and parked one expenses for that AUC thru cash transaction, my doc type is AA.While posting the park doc i am getting the following error
    "Formatting error in the field COBL-PRCTR"
    How to resolve this issue
    Thanks & Regards
    Appan

    Hi,
    First go to transaction FBV0 and change the expense line item for account aasignment in field Profit Center.
    Hope you have PCA active in your system.
    Since your expense line item will have an account assignment to PCA.
    Please check and post again, if still the problem exists.
    Thanks,
    Srinu

  • Encountered error while updating the payment document

    Hi Guys,
    I encountered an error while updating the payment document of one of our bank account. See below error message:
    Error: Unable to lock the record. Cause: The record is being modified by another user
    thanks,
    gracie

    Hi Vikas,
    Repeat the changes you are trying to make one step at a time and make sure you click on update in both the series screen and the document numbers screen every time.
    I've faced this issue and doing this helped.
    Regards,
    Hamsa

  • Reg:how to post the parked documents using BDC

    Duplicate message in General deleted.  Please do not post the same question in more than one forum.
    Hi
    I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
    Please suggest me a solution for this.
    Thanks,
    Satish
    Edited by: Matt on Dec 3, 2008 7:40 PM

    Hi Rob,
    Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction.  Please send the code.
    Thanks,
    Satish

  • Bapi or FM for posting the parked document

    Hi All,
    Can someone suggest for FM or Bapi for posting the parked document??
    Regards,
    Shobana.K

    try this...
    BAPI_ACC_DOCUMENT_POST
    BAPI_ACC_INVOICE_RECEIPT_POST
    BAPI_INCOMINGINVOICE_PARK 
    BAPI_INCOMINGINVOICE_CREATE
    MRM_PARKED_INVOICE_POST

  • Error while releasing the billing document to accounting

    Dear All,
    I need your favor to resolve the below issue:
    (System SAP SAP ECC 6.0)
    User is getting the below error message while releasing the billing document to accounting in VF02:
    This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
    Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
    User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
    "Consolidated companies 151 and 186 are different
    Message no. F5080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
    Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
    Thanks in advance,
    Praveen

    Hi Murali,
    Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
    Thanks,
    Praveen

  • BAPI_GOODSMVT_CREATE - Error while posting a Material Document

    Hi Experts,
    We are  trying to do the material document posting using the transaction "MB1C" manually in SAP. The movement type which we are using for the same is "261".  While doing this is, it is asking for a work order number and the Recipient number. We gave the Recipient Number as "123". Material document is created successfully.
    Again using the same transaction  "MB1C" , we are trying to do the reversal of the material document which we posted previously against another work order number for the same material and the serial number if the material is serialised and as well as for the non serialised material.
    Both this case, in SAP the material document is created succesfully. This is done manually in SAP.
    When we are trying to create the material document using the BAPI 'BAPI_GOODSMVT_CREATE', for the above scenario, posting the material document '261' movement type for one work order and the reversal for another work order '262' movement type for the same material (whether it is a serialised or non serialised) we are getting the eror as "RE Qty. transferred exceeded 1 PC: 50,003,695 C001 USED 1200".
    We are passing the following at the item level. MATERIAL Number, Plant, STGE_LOC, ENTRY_QNT, MOVE_TYPE, BATCH, ORDERID, RESERV_NO,  RES_ITEM, ACTIVITY, XSTOB for reversal.
    We are passing the GM_CODE as '05'.
    Please let us know what needs to be changed inorder to create the material document properly without getting errors.
    Thanks in Advance,
    Mohan.

    Hi,
    We fixed this issue by removing the reservation number of the material when we are trying to post the material document with the movement type "262".
    The reason for removing the reservation number for the movement type "262"
    The reservation number is getting created against a work order when we trying to create the work order in IW32. This reservation number is used for validating the stock while we are trying to consume and doing the reversal.
    SAP is allowing us to reverse the consumed quantities only based on the reservartion number and hence we got this error.
    To fix this error, if we are trying to reverse a particular material against a different work order for which it has been consumed previiously, remove the reservation number and item number and try posting the material document.
    Hope this solution will solve your issue:)
    Thanks and Regards,
    Mohan.

  • Error while posting the IDoc for Customer Invoice.

    hi,
    I m posting Customer Invoice through LSMW using IDocs.
    Basic type is FIDCCP02 and message is FIDCC2.
    While posting the Idoc I m getting error as:
    'Document or line item does not exist for invoice reference'.
    I m not getting the error why it is asking for invoice reference because
    in FB01 it is not asking for any reference or anything.
    Even in f-22 also it is not asking for the same.
    In Idoc all the item level values are coming prorperly.
    If anybody worked on such issues then please reply.
    -Thanx.
    -Umesh

    Hi,
    Where you able to resolve your issue, I would appreciate if you can share the solution.
    Thanks

  • ERROR  WHILE POSTING  THE STOCK  OF MATERIAL

    Dear experts
    while  posting  the stock  of  material  iam  getting  the error  'number ranges for transevent type WA in year 2011 does not exist.
    what  transaction  should  be  used  .
    Thanks & Regards.
    Erfan.

    Dear,
    First of all please go to T-code FBKP, click on Document Type, double click on document Type "WA" and check what is the value in Number Range.
    For Example there it is 01, then got to FBN1, enter company code and give  give 01 and against this maintain number.
    Hope this helps!!!
    Br,Vivek

Maybe you are looking for

  • Voucher Number in new posting period

    hello, I have created new posting period and series for financial year 2011-12. In previous year I have created 600 voucher. My issue is that when I am creating new voucher, voucher number is showing 601. I want that for new series voucher number sho

  • Cost of Goods Sold in IS Oil

    Hi Friends, Could someone help out with what technologies/databases are being used to capture and maintain the Cost of Goods Sold?  (e.g., SAP MM examples or something else) ? I am working on a downstream project for an oil major and would like to de

  • The iTunes application could not be oppened. An unknown error occurred (-50

    I am getting a "the iTunes application could not be oppened. An unknown error occurred (-50). All was fine untill I loaded the latest version this pm. I am running Windows 7 Profesional on an IBM X201i. I have tried repairing it - no luck. I installe

  • Update of GL andReconciliaion accounts

    When does the Reconcial account gets update ? like invoice posting to FI or after posting incoming payment ? Simialry, when the GL accounts gets updated ?

  • How do i save files on my ipad 2?

    Could you recommend software that I could use to save files on my ipad 2, if there is no other options to exhaust?