ERROR WHILE POSTING THE STOCK OF MATERIAL

Dear experts
while posting the stock of material iam getting the error 'number ranges for transevent type WA in year 2011 does not exist.
what transaction should be used .
Thanks & Regards.
Erfan.

Dear,
First of all please go to T-code FBKP, click on Document Type, double click on document Type "WA" and check what is the value in Number Range.
For Example there it is 01, then got to FBN1, enter company code and give give 01 and against this maintain number.
Hope this helps!!!
Br,Vivek

Similar Messages

Error while posting the stocks

Dear Gurus,
please tell me, when I tried to post the Material1 using T-code MB1C for the wh no-6400, I am getting an error message "Material1 does not exist in 6400"
Plz suggest................

Dear,
        This Error is because ofv two following reason,
        1) Material is not extended to 6400, which u can do by MMO1/MM02. If this os OK then
        2) Do check whether PLANT PRAMETER is exist for this Plant 6400 or not,u can check it by following path..
            SPROMATERIAL MANAGEMENTINVENTORY MANAGEMENT AND PHYSICAL INVENTORY--PLANT PARAMETER
Regards
AJIT K SINGH
HAPPY TO HELP U

Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

Hai Experts
While releasing the stock from Quality i got error like function cannot be caried out,
The Material Status CRTD CHCR SPRQ.
Thanks
Rajakarthik

Rajakarthik
It looks like the status you mentioned are of inspection lot.
CRTD mean created status of inspection lot.
CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
Regards
Mahesh

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error while posting the IDoc for Customer Invoice.

hi,
I m posting Customer Invoice through LSMW using IDocs.
Basic type is FIDCCP02 and message is FIDCC2.
While posting the Idoc I m getting error as:
'Document or line item does not exist for invoice reference'.
I m not getting the error why it is asking for invoice reference because
in FB01 it is not asking for any reference or anything.
Even in f-22 also it is not asking for the same.
In Idoc all the item level values are coming prorperly.
If anybody worked on such issues then please reply.
-Thanx.
-Umesh

Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks

Error while posting the CREMAS03 Idoc

Hi
I a getting the Error while posting CREMAS03 idoc from File
The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
but when i cheked with the functional guys , the comany code exits..
Any one have any idea
SV

Hey,
    seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.

Error while posting the payroll results to accounts

Dear all,
Im facing a issue while posting the payroll results to the accounts in T.code PC00_M99_CIPE,
The error log says...
Inconsistence in payroll results (tables V0/RT)
Diagnosis:
An inconsistency results has been found during the evaluation of the payroll results. No referenced entry has been found in table V0.
Can anybody suggest me wat i hav to do...
Thanks & regards
Gopinath.Balakrishnan

Hi
Check whether the user is having the authorisation for the t.code PC_PAYRESULT or PC00_M40-PAYRESULT.
Because some times HR user will run the payroll and FI user will do the postings. If FI user is doing the postings, in general he will not have the authorisation for HR T.codes, then system will give such kind of errors.
If not check the paryoll results and control record.
Thanks & Regards
Bharathi

Error While posting the Budget Update(BPUP)

We are getting an error message u201CError when saving the Budget Updateu201D while posting the Budget Update (BPUP). I have filed all mandatory requirements in the transaction.
I couldnu2019t able to find out reason for this error message. Please help me on this.

Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks

Error while posting the Goods Receipt

Hi Friends,
I am having an issue while posting the Goods Receipt.
I am getting the error "Balance not zero: 1.000,00- debit: 0,00 credit: 1.000,00". I am using the Purchase Order with Account Assignment category P and K. When ever I used the account assignment category, I am getting this type of error. I have checked the configuration and every thing is OK. System is not able to debit the G/L account which is mentioned in the Purchase Order, hence the problem. However, I think system is able to get the G/L account (to Credit the amount) from Automatic Account determination.
Would like to know if any one come across similar type of problem and resolved it.
We have recently upgraded the system from 4.7 to ECC 6.0.
Apprciate the help.
Thank you,
Prakash

Hi
Thank you for the reply.
I have checked what you have mentioned. While creating PO it is determining the G/L account automatically through the assignments in OBYC. Even then I am getting the error while doing the Goods Receipt.
Any one is having any idea?
Thank you,
Prakash
Edited by: Prakash KM on Dec 17, 2010 6:26 PM

Error while initilizing the stock in MB1C T-Code

Hi gurus,
I am SD Guy. I am getting error when i am posting the stock by using MB1C - T Code. That error is "Number range for Transaction/even type WA in year 2011, does not exist."
I tried by using OBA7-Tcode, but it is not rectifying. Can you please tell me.
Thanks

Hi
check
Use t.code: OMBT
In the Menu Click Group -> maintain---> again click Group->insert
Next Screen
define
& then enter
u2026.Year u2026u2026u2026u2026From Number .............. To Number.
t.code: OMBA
Click u201CFinancial Accounting Document typesu201D & and you will have new screen and enter Number range and save.
Now try
Regards
kailas Ugale

Error while posting the material

Hi experts,
While intially posting the material in Mb1c by movement type 561.
while saving it show the below error
"Account determination for entry GKR GBB ____ BSA 3000 not possible"
pls help
regards
arun

Have u checked this first
go to OMWD and put the valution grouping code may be u r using 0001 for ur valuating area (plant) and company combination
hear this is missing so u r having the error
if yes
then go to OBYC
click on gbb give chart of account i think in ur case its GKR then find entry with
0001 BSA 3000 GL or
BSA 3000 GL
if this entru is missing
the ask ur fi person to creat gl account to initial balace upload in FS00
may be copy of 399999 std sap have for copmpanyt code 1000
and creat a entry
0001 BSA 3000 GL
BSA 3000 GL
hope this will clear ur issue
Reward if issue solved
Message was edited by:
Umakant Bhangale

Error while posting GR- "Enter a material or an item category"

Hi All,
While posting GR for a HALB material, I am getting this error: " Enter a material or an item category"...I am not doing Inbound delivery ..please assist
Surendra

Dear Bhushan,
Item category = blank means that you would like to purchase "normally" without any extra features (such as subcontracting).
When you create the PO - SAP checks that the combination of item category and account-assignment-category exists. Could it be that from the time that you created the PO until you tried the MIGO - somebodey deleted the customizing for this item category - account assignment category ?
If not, could you provide the table name that SAP sais the item category is not entered in ? ("item category is not entered in table *** " - what is *** ?)
Best Regards,
Isaac

HU Error-While posting the PGI against the Outbound Delivery

Hello,
I am facing the issue,when posting one PGI against the outbound delivery.The error is as below:-
" Negative stock: 8,000 material: 51238495FA on HU 00233034307019924815"
The error message detail is :-L9-604"
Could you please let me know,how we can overcome this issue.
An earliest response would be appreciable.
Thanks
JP

Have you completed TO and ITs confirmation process for the outbound DElivery ?.If yes then if you are using warehouse managed material then check the stock in LS26 it should be 916 location and then check the handling unit stock.
Check the Handling unit status is 01 status or some other status.If it is 01 then definatly sytem will allow you PGI.Check your HU history is your delivery is final document or not .It seems some mismatch with delivery qty and handling qty in your case.

Error while posting the Delivery

Dear All,
At the time of PGI posting i am getting an error" Valuated stock Becomes negative 9.70 See long text.. but the stock is available in the unrestricted use more than the delivery quantity in material master accounting view is not showing the full stock quantity... very less quantity... material master accounting view total stock and MMBE stock not talleying....
How to resolve this issue...
Regards
P.Anandhakumar

Hello Palanisamy,
check also transaction MD04.
Best Regards, Dirk

Direct store Delivery : Error while posting the customer payment in FSR

Dear Experts,
We are in the process of DSD implementation at customer place. We are facing the following isuse , your help will be highly appriciated
This is with respect to an error we are facing when the collection clearing
process iin final settlement Run.
The details of the same are as follows:
Transaction code: /DSD/SL_COCKPIT
Area: Payment Posting
Error: Balancing field "Profit Center" in line item 001 not filled
The customer line item of the invoice being cleared has been assigned
the profit center as part of the document splitting at the stage of
invoicing to the customer.
The bank account/cash account to be posted at the time of clearing in
DSD settlement process is not capable of being provided as input nor
available for configuration in the DSD section in IMG.
regards
Neleesh

Hi
Did you find the solution to this error. We are also facing the same issue while posting payment against the payment method 'Check'.
Kindly help please.
Regards
Noman Rasheed

ERROR WHILE POSTING THE STOCK OF MATERIAL

Similar Messages

Maybe you are looking for