Error while posting through tcode tbb1

Hi All,
While trying to post through TBB1, I'm getting the following error message:
" S.E.201 Profit Center 001"
While debugging I noticed that the FM 'TB_DEAL_FIX_POST' is returning an error in its error flag.
Wating for your replies.
Regards,
Arnab

hi,
please check this link ,it will help you
http://72.14.235.132/search?q=cache:V0BoGC09gZAJ:help.sap.com/bp_hightechv1600/HighTech_DE/Documentation/H83_BPP_EN_DE.docerrorSerialnumberislockedbyUserwhilepostingthrough+MIGO%2Bsap&hl=en&ct=clnk&cd=10&gl=in
Thanks and regards
Durga.K

Similar Messages

Error while posting usint tcode f-02 in fi

Hi all,
I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document but while saving it gives me the following error message:
Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
Message no:f1030
DIAGNOSIS:
The application has accessed a funds management or cash management module with parameters messing or defective.
PROCEDURE:
Notify your system administrator.
Hope some body would help me out.
Thanks

Hi,
Not sure if this works out
try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
double click on company code and see if any thing is assigned in the feild to FM.
regards
genie

Getting Error while posting through KB11N : No true sender object entered

HI Expert,
We have stastical internal order defined and same we are using in Asset. Let me explain the scenarion.
We created the Purchase requisition with the stastical Internal Order then we did Purchase Order and MIGO -Goods Receipt.
Now we realised that wrong Internal Order was used. Now we want to tranasfer cost from that Internal order to New Internal Order. we are trying to post through KB11N but while giving the all details i am getting error as per below;
No true sender object entered
Message no. BK175
Diagnosis
You have entered a statistical object as a sender. Statistical objects, however, are only intended for use with dual account assignments.
Procedure
1. If you require a dual account assignment, enter a true object as a sender also.
We are using cost element with having cost element category 90.
I don't no which is the true sender Object.
Thanks in advance
ealry help will be highly appreciated.

Your postings had happened to a statistical internal order. I hope the real postings might have happened to a cost centre.
You cannot settle anything from a statistical internal order. It is just for information purpose only. If the above posting had captured a cost centre (real posting), you can distribute/assess the cost from the cost centre to a real internal order for your purpose.

HTTPs without client authentication, error while posting through Altova

Hi Experts
I am doing a SOAP- XI-Proxy synchronous scenario where i have to use HTTPs without client authentication for the first time in my system.
I have made the scenario and WSDL out of it.
When i am trying to test it through Altova, i am getting the following error:
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SOAP:Body>
        <SOAP:Fault>
            <faultcode>SOAP:Server</faultcode>
            <faultstring>Server Error</faultstring>
            <detail>
                <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                    <context>XIAdapter</context>
                    <code>ADAPTER.JAVA_EXCEPTION</code>
                    <text><![CDATA[
java.security.AccessControlException: https scheme required
    at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:918)
    at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_3.process(ModuleLocalLocalObjectImpl0_3.java:103)
    at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:296)
    at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0.process(ModuleProcessorLocalLocalObjectImpl0_0.java:103)
    at com.sap.aii.af.mp.soap.web.MessageServlet.callModuleProcessor(MessageServlet.java:187)
    at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:496)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
          ]]></text>
                </s:SystemError>
            </detail>
        </SOAP:Fault>
    </SOAP:Body>
</SOAP:Envelope>
i saw a few discussion on web but nowhere the solution was provided.
the url is
http://abc.sap.point:1234/XISOAPAdapter/MessageServlet?channel=:system:communicationchannel&version=3.0&Sender.Service=x&Interface=x%5Ex
i changed it to https also but in that case it was not even posting the request.
i have set the sender adapter like this
is there any setting that i am missing.
What is the setting the i need to do in SM59.
Please help me getting through this.
Your help is highly appreciated. Thanks in advance.
Neha

HI Neha,
1. Enable the https service in the ICM: you can follow the way to do it like is pointed out in the page 4 of this document (PI 7.1 and PI 7.0 has the same smicm abap transaction) http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60ff2883-70c5-2c10-f090-a744def2ba66?overridelayout=t…
2. Generate the certificate. Use the STRUST transaction. Chech this document SSL Configuration in SAP ABAP AS and JAVA AS – Step-by-step procedure
Hope this helps.
Regards.

Getting Error while posting through BAPI_ACC_DOCUMENT_POST

Hi Folks,
   I could not post an GL account using the BAPI function module BAPI_ACC_DOCUMENT_POST . The code was,
wa_docheader-bus_act    = 'RFBU'.
wa_docheader-username   = 'CHARAN'.
wa_docheader-comp_code = '0147'.
wa_docheader-doc_date   = '20101006'.
wa_docheader-pstng_date = '20101006'.
wa_docheader-DOC_TYPE   =      'SA'.
*wa_docheader-REF_DOC_NO =     'UNASSIGNED'.
wa_glaccnt-itemno_acc = '0010'.
wa_glaccnt-gl_account = '0000100632'.
wa_glaccnt-item_text   = 'POSTING TO GL'.
APPEND wa_glaccnt TO i_glaccnt.
wa_glaccnt-itemno_acc = '0020'.
wa_glaccnt-gl_account = '0000100634'.
wa_glaccnt-item_text   = 'POSTING TO GL'.
APPEND wa_glaccnt TO i_glaccnt.
*wa_pyaccnt-itemno_acc = '0000100634'.
*wa_pyaccnt-gl_account = '0001234567'.
*APPEND wa_pyaccnt TO i_pyaccnt.
wa_curamt-itemno_acc    =      '0010'.
wa_curamt-currency      =        'USD'.
wa_curamt-curr_type     = '00'.
wa_curamt-amt_doccur    = 200 .
APPEND wa_curamt TO i_curamt.
wa_curamt-itemno_acc    =      '0020'.
wa_curamt-currency      =        'USD'.
wa_curamt-curr_type     = '00'.
wa_curamt-amt_doccur    =     200.
APPEND wa_curamt TO i_curamt.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
    documentheader          = wa_docheader
CUSTOMERCPD             =
CONTRACTHEADER          =
IMPORTING
OBJ_TYPE                =
OBJ_KEY                 =
OBJ_SYS                 =
TABLES
    accountgl               = i_glaccnt
ACCOUNTRECEIVABLE       =
    accountpayable          = i_pyaccnt
ACCOUNTTAX              =
    currencyamount          = i_curamt
CRITERIA                =
VALUEFIELD              =
EXTENSION1              =
    return                  = i_ret
PAYMENTCARD             =
CONTRACTITEM            =
    extension2              = i_ext2
REALESTATE              =
ACCOUNTWT               =
The Output error i'm getting is :
Error in document : BKPFF $ BH2CLNT200 400.00 USD
Balance in transaction currency.
Please help me in posting the Gl document successfully. Help will be rewarded.
Thanks in advance.

Total amount of internal table I_CURAMT-AMT_DOCCURR should be zero (Credit & Debit).
Edit : See [Accounting Document Interface |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=195726664] for reference.
Edited by: Vinod Kumar on Oct 8, 2010 1:04 PM

Error while posting mb1c

He seniors,
I am getting error while posting stock in T. code- MB1C
Error- G/L account 799999 dose not exists in company code.
dear seniors please suggest me what is menu path or t. code and what are the settings I should maintain their
thanks......

Dear Sundyeep,
As already explained,please search in google or forum before posting,you can copy paste your error massege in google,it will provide you the relative links.Read the threads at the top of forum.For your error go through this link:-
CHART OF ACCOUNTS (MOST URGENT)
Or use Tcode OBC4 and OBC5 to define and assign field status variant to Company Code.
Thanks,
Davinder
Edited by: davinderpalsingh on Sep 5, 2011 3:04 PM

Error while posting 561 Document

Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.

Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar

Runtime error while posting a document (FB70/FBS1)

Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?

Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.

ALE error while posting payroll data

Hi all,
We are trying to set up payroll posting via ALE interface. We have done the following settings
1. Distribution model setup with filters on for standard bapi's
2. Partner profile setup
3. RFC destination setup
When we try to post payroll data,it was returned with the following errors
       RFC destination is not maintained for object BUS6001 and method PRECHECKPAYROLLACCOUNTASSIGN
       The account assignment objects could not be checked
       RFC destination is not maintained for object BUS6004 and method CHECK
       The G/L account could not be checked
We verified RFC destination and it is working fine. I have searched all possible links in SCN, but unable to get the solution.
Can someone help in this issue?

Hi,
Using tcode pc_payresult please check whether the off-cycle payroll is executed again in period 06-2010. If yes then try to post off-cycle payroll separately (PC00_M99_CIPE - Create Posting Run) by entering "Off-Cycle Payroll Run" parameters. May be you will get an error while posting this off-cycle payroll because this payroll is already posted. In this case you will have to reverse the existing off-cycle posting and then post off-cycle payroll again.
Once off-cycle payroll is posted, then you try to post normal monthly payroll.
I hope your problem will be solved by doing the above work out.
Regards,
Waqas Rashid

Error while posting FPSEC1

Hi everyone,
Please guide me how to correct the following error:
While posting SD Request through transaction code: FPSEC1, we are facing an error message, 'document is transferred without Main and Sub transaction'.
Please guide.
Thanks and Regards

Hi Prudhvi,
Please check whether the main and sub transactions for which you have defined the account assignments are assigned correctly with the internal main and sub transaction.
And for the error 2, please maintain the reconciliation group id for your user id in the IMG path>Financial Accounting>Contract Accounts Receivable and Payable>Basic Functions>Postings and Documents>Document>Define Default Values>Maintain Rules for Reconciliation Key Default Values>Maintain Reconciliation Groups for Default Values.
You should define the reconciliation key group for the user id because posting the security deposit requires a reconciliation key to post the statistical security deposit request in FICA. The reconciliation key is generated automatically using the reconciliation key group assigned for the user id. You will not be able to edit the reconciliation key from FPSEC1.
Thanks,
Sakthi.

Field Profit Center is not populated while posting through T-Code F-02

Dear Sir / Madam,
While posting through T-code F-02 the field Profit center is in hidden mode
as a result I am getting the given below error.
"GLT2201 - Balancing field profit center in line item 001 not filled"
Please guide me as to how do I change Field status varient so that the field Profit center gets activated in optional mode in F-02.
I tried searching the same but could not find the solution.
Regards
Chirag Shah

Dear expert
Check following steps...
1. Use transaction ACSET and enter cost center as your account assignment for type 01 APC posting..
2. Make sure Cost Center exists in the Asset Master..
3. Make sure profit center is entered into Cost Center master.
4.Check the steps where you assign the GL accounts to the splitting rules.
suggest you to go through the below mentioned links
Balancing Field "Profit Center" in line item 001 not filled
Balancing field "profit center" in line item 001 not filled
GLT2201 - Balancing field profit center in line item 001 not filled
Balancing field "Profit Center" in line item 001 not filled
F-51: Balancing field "Profit Center" in line item 001 not filled
Balancinf field profit center in line item 001 not filled
Regards,
Ajeesh.s

CIN - Error while posting excise sales invoice in J1IIN

Dear All,
Getting below error while posting excise invoice for factory Sales.
"No account is specified in item 0000000001"
Please guide where to maintain GL
Regards,
Rakesh

Hi,
Import cycle :-
1. MIRO-Bill of Entry
2. Excise Invoice capture
3. Goods Receipt
4. Excise Invoice posting
5. MIRO -Vendor settelement
Tcode you used for capturing excise invoice - j1iex
posting the excise invoice. j1iex
Thanks
jai

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Error while scheduling through web service

We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to "Automate the Scheduling of Reports" according to our requirement:
1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually.
3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
Above requirements are not currently available with Oracle BI Publisher.
We are getting error while scheduling through ScheduleRequest class.
The client.java is as follows:
public class ScheduleServiceClient
@WebServiceRef
private static ScheduleService_Service scheduleService_Service;
public static void main(String [] args)
    scheduleService_Service = new ScheduleService_Service();
    ScheduleService scheduleService = scheduleService_Service.getScheduleService();
    // Add your code to call the desired methods.
    try {
                FTPDeliveryOption ftpdo =new FTPDeliveryOption();
                ftpdo.setFtpServerName("ServerName");
                ftpdo.setFtpUserName("Username");
                ftpdo.setFtpUserPassword("Password");
                ftpdo.setRemoteFile("/path/TestFile");
                ftpdo.setSftpOption(true);
                List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
                listobj.add(ftpdo);
                ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption();
                ar.setItem(listobj);
                DeliveryChannels dc = new DeliveryChannels();
                dc.setFtpOptions(ar);
                ScheduleRequest scheduleRequest = new ScheduleRequest();
                scheduleRequest.setDeliveryChannels(dc);
                scheduleRequest.setJobLocale("en-US");
                scheduleRequest.setUserJobName("Job_1_WebService");
                scheduleRequest.setDataModelUrl("Url");
                scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
                scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
                String userID = "BI_Publisher_Username";
                String password = "BI_Publisher_Password";
                scheduleService.scheduleReport(scheduleRequest,userID,password);
            } catch(Exception exception) {
                exception.printStackTrace();
Snapshot of error is attached.
Kindly suggest the way of getting out of this error.

Hi
Check this thread
WD Message Manager
Reward opints if usefull....

Error while posting through tcode tbb1

Similar Messages

Maybe you are looking for