Error while Posting to all operative areas

hi,
while posting to all operative areas in TBB1 am getting the following error
"No accounting rule despite posting to general ledger ERP" for valuation area 002. Whereas no error for operative valuation area 001.
Please help.

Hi Sur,
the long text SAP note 922332 explains what to do in this case: is there an accounting principle assigned to all of the relevant valuation areas for the accounting code in IMG under  'Assign Accounting Codes and Valuation Areas'?
Best regards,
Marie
SAP TRM

Similar Messages

  • Error while posting the parked document in ECC 6.0

    Hello ABAPers,
    After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
    Thanks!
    Regards,
    M M Jaffer.

    Hello Nabheet ,
    It is a standard code. We are calling the FM  'PRELIMINIARY_POSTING_POST_ALL'  for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
    Thanks.

  • Error while posting asset aquisition

    Hi to All,
    I am getting following error while posting aquisition entry.
    "Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
    I had made all settings what the error says above but still error persists.
    PLEASE ITS VERY URGENT
    tanuja

    Hi tanuja,
    Please check the setting in the T- code OABT.
    If it helps pls reward some points.
    JS

  • Error while posting sec.HighEd cess (1%) in J1iin.

    we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount ' 0,10' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System Response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.
    and.....
    System failure during locking GLaccount 1001 by 21150105
    Message no. 8I076
    reply me.  Text Removed
    Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
    Please dont add such comments

    Hey,
    I have already replied to your thread for F5702 error.
    G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
    Regards,
    Brinda

  • Error while posting 561 Document

    Dear All
                Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
    Even OBYC setting for that valuation class already assigned.
    please advice.
    Regards
    Kumar.

    Hello Anandhakumar ,
    please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
    and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
    it could solve your query.
    regards,
    Ninad Kshirsagar

  • Error while creating model classes, operation aborted in NWDS

    Hi All,
    When i select Adaptive rfc 2 model  and then search for the RFC,  when i select RFC and click on next i get an error while importing :
    Error while creating model classes, operation aborted.
    It is working fine in visual composer and i have activated function module, RFC but getting same error. It is also working in web service navigator also.
    Can any one help me out??
    Regards,
    Pradeep kumar
    Edited by: pradeep_546 on Feb 17, 2011 9:35 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:36 PM
    Edited by: pradeep_546 on Feb 17, 2011 9:37 PM

    Hai guys thanks for reply
    Tushar,
    I am using NWDS 7.2, ce7.2 server, ECC 6.0.
    Amit,
    I have tested the JCO destinations they are working fine and i created a new pair of JCO destinations but unable to import the Adaptive RFC2 Model gives same error but Adaptive webservices are working fine in my NWDS7.2
    Deepak,
    I am unable to create model in other projects also.
    I have sufficient amount of memory in my drive.
    I have imported the DC to other NWDS but it gives same error.
    Thanks for all,
    Regards,
    Pradeep Kumar G
    Edited by: pradeep_546 on Feb 18, 2011 3:05 PM

  • Error while Posting GR or GI

    Dear All.
    I am getting the below error while posting a Goods Receipt / Goods issue, Kindly suggest what could be wrong ??
    "You are not allowed to post manually in the substitute system
    Message no. FDM_MIRROR301
    I am trying to post the GR against a standard PO and trying to make GI against standard outbound delivery
    Best Regards,
    Santosh Kumar B V

    Hi Santosh,
    I believe you are using the FSCM - Collections module.
    This clearly looks like a program error.
    There are various SAP notes for the FDM_MIRROR errors. I have searched a few but could not make anything with number 301.
    This to me looks like a new error and you may report the same to SAP for a note.
    Thanks
    Aravind

  • Error while posting IDoc

    Hi,
    i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.

    First ,
    check the partner profiles in R3,
    i.e. a logical system is defined for XI , particluar Message type is added on inbond side and selected the releavnt messge type and and process code. this is all in WE20.
    defining a logical system is in SALE.
    then ditribute u r the model in BD 64
    once every thing is OK in R3
    on PI.
    create a RFC destination of type R3 which points to R3 , try remote log-on .
    this will be used in receiver chaneel
    and check u r receiver chaneel is defined under Business system of R3, and BS refers to same client where partner profiles are defined.
    and one of the following should be in place.
    check 'apply control record from payload' if ur explictly passing Control record from mapping
    otherwise,
    check sender service and receiver service in Receiver agreement and select appropriate systems.
    Regds,
    Suresh

  • Error while posting journal entry: -5012/unbalanced transaction

    Hi everyone,
    I got this error message when trying to add a FA Retirement.  FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
    FA G/L Account Determination is completely defined.
    Would appreciate any reply.  Thanks in advance!
    Jac

    Hi Jac,
    1, There is a known issue in a lower version before  2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
    21141 error while posting journalentry: -5012 /Unbalanced Transaction.
    If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
    2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
    Account Determination.
    There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
    1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
    2) Select an Account Determination Group;
    3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
    3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
    4) Empty the field 'Default VAT Code';
    5) Execute the Retirement functionality again.
    You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
    I hope it is helpful!
    Regards,
    Ivy Zhang
    SAP Business One Forums Team

  • ALE error while posting payroll data

    Hi all,
    We are trying to set up payroll posting via ALE interface. We have done the following settings
    1. Distribution model setup with filters on for standard bapi's
    2. Partner profile setup
    3. RFC destination setup
    When we try to post payroll data,it was returned with the following errors
           RFC destination is not maintained for object BUS6001 and method PRECHECKPAYROLLACCOUNTASSIGN
           The account assignment objects could not be checked
           RFC destination is not maintained for object BUS6004 and method CHECK
           The G/L account could not be checked
    We verified RFC destination and it is working fine. I have searched all possible links in SCN, but unable to get the solution.
    Can someone help in this issue?

    Hi,
    Using tcode pc_payresult please check whether the off-cycle payroll is executed again in period 06-2010. If yes then try to post off-cycle payroll separately (PC00_M99_CIPE - Create Posting Run) by entering "Off-Cycle Payroll Run" parameters. May be you will get an error while posting this off-cycle payroll because this payroll is already posted. In this case you will have to reverse the existing off-cycle posting and then post off-cycle payroll again.
    Once off-cycle payroll is posted, then you try to post normal monthly payroll.
    I hope your problem will be solved by doing the above work out.
    Regards,
    Waqas Rashid

  • Error while posting depot excise invoice

    Dear SAP Experts,
    We are continually facing the following error while posting "Depot
    Excise Invoice" on Production sever
    "Error in allocating Depot Invoice number interval not found Number
    object J_1IDEPINV"
    Message no is 8I336
    We have already maintained the number interval for the above object i.e
    J_1IDEPINV with respective series group 62.
    Here is the business process:
    1. First, we make transfer posting thr’ MB1B. We get material doc no
    2. Second, we make selection for RG23D for this material doc thr’ J1IJ.
    RG 23D register gets updated
    3. Third, we make ‘verify/post’ thr’ J1IJ itself. Here we are getting the
    error when we post it.
    Please do needful.
    Its an urgent isue
    Regards
    Tushar

    hello,
    In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
    Regards
    Kedar Kulkarni

  • Error while consolidating. The operation could not be completed.

    Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
    Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
    What gives?

    I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
    I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

  • Tax code error while posting Planned delivery costs in Import Scenario

    Hi!!!!!
    I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
    "Tax code V0 country IN does not exist in procedure ZAXINN"
    For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
    While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
    Please let me know what config is missing.
    Regards,
    Durga

    Is you ZAXINN assigned to the country India
    and is your taxcode (created in FTXP) created for country India?
    kr
    hakan

  • Error while posting parked documents

    HI ALL,
    After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
    Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
    Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
    On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
    But in 4.6 c a bigger screen pops up and no error is thrwon.
    We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
    Please check it.
    Thanks!

    Hi,
    Please follow as given below:
    1. Use T.Code KO31 and enter order and deactivate the control
    2. Then try to post the parked document
    3. And use T.Code KO30 and enter the order to activate the control
    Some times system will check budget availability which already commited for parked documents.
    Hope it will work.
    Chandu

  • Error while posting usint tcode f-02 in fi

    Hi all,
    I am getting an error while posting a document using t code f-02.It is allowing me to go through the 3 steps of posting a document  but while saving it gives me the following error message:
    Error accessing function module:fmfk_fikrs_read parameter:ip_fikrsp_fma_objnr
    Message no:f1030
    DIAGNOSIS:
    The application has accessed a funds management or cash management module with parameters messing or defective.
    PROCEDURE:
    Notify your system administrator.
    Hope some body would help me out.
    Thanks

    Hi,
    Not sure if this works out
    try checking img-Financial Accounting-Financial Accounting Global Settings-Company Code-Enter Global Parameters
    double click on company code and see if any thing is assigned in the feild to FM.
    regards
    genie

Maybe you are looking for