Error while posting with Tax code
Dear All,
I am getting the following error while i am trying to post with a tax code. Can someone tell me what could be the issue?
Customization for RIL j_1iindcus missing in table
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Regards
Suresh
Dear Suresh,
If you are using versions below 4.7 execute T_Code <b>J1IT</b>, go to <b> India Localization Menu->Global Settings->Company Settings</b> and add an entry for your Company Code and save.
If you are on higher versions use the following path:
<b>SPRO --> Logistics - General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Company Code Settings.</b>
This should solve the issue.
Kindly let me know if it was useful.
Regards,
Mary Sofia
Similar Messages
-
Hi Experts,
I have configured Travel Management for Canada with Tax Codes for Expense Type. Now, when i am trying to post to accounting using Tcode PRRW i am getting this error:
E RW609 Error in document: TRAVL 0000000011 ECDCLNT100
E RW619 Combination of transaction key NVP and tax code is wrong
Have we missed anything, please provide your inputs.
Regards,
KOutilya A.KHi,
Just Check these notes whether is it useful.
Note -- 1109348, 979102, 884311.
Hope this helps.
Regards,
S.Srikanth -
Recurring Posting with Tax Code
Hi Experts,
When i am trying to execute a recurring posting with some Tax Code system is giving error "location is missing".
So kindly tell me is it not possible to execute a recurring posting with tax in SAP Business one
Thanks in AdvanceHello,
You should try directily select your reccuring template on JE form, because form also have Location fields in header and row level.
Actuly tax info(Sales tax information) totally depend of what is location you have selected.
then you will find easly your issue.
Thanks
Manvendra Singh Niranjan -
Error while posting FB50 transaction code
Hi I am getting the below error while doing FB50 transaction code. Please help me
My company code is using EUR & country is Greece
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.
Thanks
KishoreHi
Go to OBBG -->Assign Country to Calculation Procedure and assign the Tax procedure( ie like TAXIN) to the GREECE Country.
This helps you resolve your issue.
Regards
Venkat -
Error while posting with Segment
Hi,
I am trying to post an entry using t- code f-02.. and i am assigning a profit center to the line item. I have also assigned a segment to my profit center....
But while posting the document i am getting the following error..
<i><b>You do not have any authorization for segment ED and function 01
Message no. FAGL_POST_SERVICE022
Diagnosis
You do not have authorization to perform function 01 for segment AA. The record type is 0.
Procedure
Contact your system administrator. Add the missing authorizations for object F_FAGL_SEG.</b></i>
Please let me know what needs to be done to rectify the above error.
Thanks and regards,
AnkurBrother! after getting error, call transacxtion SU53, you will get the list that you have missed autorization
for this,contact your basis team memeber for authorization problem.
thanks -
Expense G/L Posting with Tax Code
Hi Expert,
I got an issue as per below:
1. User purchase a gift with below posting via F-43:
Dr Expense/Material 100 [with Input Tax 6%]
Dr Input Tax 6 [auto created line]
Cr Vendor 106
2. Then there will be a posting to re-class the Expense/Material account to Gift Expense account via Manual Journal:
Cr Expense/Material 100 [with Output Tax 6%]
Cr Output tax adjustment 6 [expected auto created line]
Dr Gift Expense 106 [with Zero Rated Tax]
The issue that I am having now is, during the second posting via Manual Journal the 'expected auto created line' is not populating.
Does anyone knows why is this happen?
Thank you in advance.
Regards,
IzzatHi All,
Thanks for your advice,
Really appreciate it.
I actually managed to solve this issue by creating a new tax code by using a reverse charge mechanism.
Where in the tax code I maintained the Output Tax with -6% and Non Deductible Input Tax 6%. I simulated the scenario and it gave me the result as per what I want.
Thank you.
Regards,
Izzat Ibrahim -
Error while posting to Tax Journal Entry for sales and use tax
Hi,
I am trying to post a journal entry (FB50) to cleanup and correct the liability on our sales and use tax. All lines are giving warnings and messages.Give me a suggestion on how to get it to post . Or if needed, another solution to correcting the balances in the sales and use taxes.
But the entry to a/c # 226530 is giving an information message but still wouldnu2019t save.
The Error message is
Enter the tax base amounts for account 226400 in company codeAFCO
Message no. F5A375
Diagnosis
You are posting directly to a tax account. Enter the tax base amounts per item using the function "Tax Amounts".
Kindly help me how to fix the above issue.
Thanks
SuvarnaYou may want to check out the following notes... they may shed some light on your problem.
681930 - Posting on tax account possible w/o specific. of base amount
1090096 - FB60 / MIRO - Checking direct tax after change (F5A375)
944978 - FB60 / MIRO - check of direct tax after change -
Whenever I try to publish my site (not to a .mac account) using my FTP is says an error and stops the process. Can one photo on one of my pages stop the whole process? I ask this b/c when I publish to a folder first it tells me one of the images registers an error. If so, whats the best way to find out what item or image it is. I've tried Cyberduck, Transit and Fetch to publish to the server and all have said the same thing.
Thanks.
powerbook g4Does iWeb tell you which image it is?
Have you tried opening each image in turn in your image editing program and seeing if it loads properly?
Also, with your FTP program you should be able to drag and drop items across to your hosting server, or at least you should be able to select items to FTP across. Move items one at a time, and you can then can see which one registers the error.
Michael
iMac 20" Intel Core Duo 2GHz -
Error while posting vendor invoice in F-43
Hi experts,
while posting vendor invoice with Tax code , i am getting the following error:
Posting is only possible with a zero balance; correct document
Message no. F5060
Here tax line item is not yet all displaying in simulation.
If I posted with tax code with ZERO percentage it is posting correctly.
where as same transaction I am able to post through transaction code FB60.
What could be the reason?
regs,
ramesh bHi
Please check and correct the respective line items , because your selecting incorrect GL account with respective posting keys
Example : You have exp gl a/c at first line items against vendor invoice posting's, normaly this vendor will post in first line item with posting key is 31 with vendor a/c and second line item 40 with exp GL a/c and same you will check any required inputs have missed out from this transactions.
Regards
CHOWDARY -
Tax code error while posting Planned delivery costs in Import Scenario
Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
DurgaIs you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan -
Error while sending PO (with tax code) from SSP to SUS via MM
Hello Experts
We are implementing Self Service Procurement and Supplier Self Services scenario.
We have created a SC with Tax Code say X in Self Service Procurement. The SC gets created as PO in R/3 (MM) system.
The IDoc which is getting created in the R/3 system has different segments than the one which gets created when we create the PO directly in R/3 system.
This IDoc which is seen in R/3 with the Status 26 - ' Error during syntax check of IDoc (outbound) '.
Please help, we are new to SSP.
Thanx and Regards
Gaurav
Edited by: Gaurav Giroti on Jan 29, 2009 1:36 PM
Edited by: Gaurav Giroti on Jan 29, 2009 1:37 PMnote 1311560 to be applied in ebp.
-
Short dump while PO creation with Tax Code
we are facing problem while creation PO, while providing the Tax code(Example V0), its going for short dump, check the below
the program SAPLV61Z and
The exception must either be prevented, caught within the procedure
"SEL_KONDTAB"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Check the field names in the SELECT clause.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_INVALID_FIELDNAME" CX_SY_DYNAMIC_OSQL_SEMANTICSC
"SAPLV61Z" or "LV61ZU01"
"SEL_KONDTAB"
The termination occurred in the ABAP program "SAPLV61Z" in "SEL_KONDTAB".
The main program was "RM_MEPO_GUI ".
The termination occurred in line 537 of the source code of the (Include)
program "LV61ZU01"
of the source code of program "LV61ZU01" (when calling the editor 5370).
Processing was terminated because the exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in the
procedure "SEL_KONDTAB" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "SAPLV61Z ". Its source code starts in line 254
of the (Include) program "LV61ZU01 ".
005360 IF se_read_all_prestep IS INITIAL.
> SELECT * FROM (t681-kotab) APPENDING TABLE <cond_tab>
005380 UP TO 1 ROWS
005390 WHERE kappl = se_kappl
005400 AND kschl = se_kschl
005410 AND datbi >= se_date
005420 AND datab <= se_date
005430 AND (coding_tab).
005440 h_subrc = sy-subrc.
In the above statement execution its going for dump, when the (t681-kotab) value is A980 when i checked at debugging
Kindly help me out to solve the issue
Thanks in advance
Regards
KesavHi,
Do you have an integer field in the condition table A980? It looks like a field in the table is integer one and the system during creation of custom dynamic select statement adds as many spaces as possible before the integer value (integer values are right justified), so the statement exceeds the maximum length with an 'AND' or another condition clause.
Please check and provide more details if the issue is not resolved.
Regards,
Marcin -
Error while Posting Document in FBV0
Hi Guys,
Iam getting following error while Posting Document in FBV0 which is already parked and it is with tax code.
Error: "No batch input data for screen SAPMF05A 0700"
Kindly suggest
Thanx and Regards
MunenderAlso have a look at the following notes:-
=> Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
=> Note 800177 - FB01: No batch input data for SAPMF05A 0700
thanks
G. Lakshmipathi -
Error while posting the parked document in ECC 6.0
Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks. -
Error while posting parked documents
HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu
Maybe you are looking for
-
Is it possible to use a iMac G4 flat panel as a second display
Hi all, I am not sure whether it's the right place to post this question but here it goes. We have a 15 inches iMac G4 that's getting slow and are considering upgrading to one of the newer iMac. However, would it be possible to keep using the display
-
ABAP Web Services Exception Valorization in SOAP Fault Message
Hi, I created a Custom Function Module in ABAP with a custom exception ( "Exception1) in exception list (including a short text description of the exception ("This is the first exception!!!")). I exposed it as web services by means of 'Web service AB
-
Is there an ANT task that will allow me to install OC4J either locally or remotely and then start it? Thanks in advance Angus
-
Why are songs halting playback?
I'm having a regular problem in iTunes where songs will stop playing with 1 or 2 seconds left til the end. It doesn't "Stop," in that the Play button changes to the Pause or Stop buttons, it just hangs up and doesn't play any further. If I hit the fo
-
Site automatically scale to fit the browser window
hello all! i'm working on a site that i'd like to automatically scale to fit the browser window, without any scrolling and while preserving its aspect ratio. my client is very particular about the design & does not want the width & height of the imag