Error while printing the form in CO03

Hi
When I try to print using "CO03", I'm getting the following:
"Output is continuous or contains too many pages (>4)"
and the form is not getting printed.
Can anybody help me out in resolving this problem

Hi,
please check NEXT PAGE for second page.
if not give Next page as second page.
get back if any other querry,
Regards
swapnil

Similar Messages

  • Error while determining the form function module

    Hi everyone,
    We are experiencing problems while displaying one adobe form in ESS. It’s the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to “Display/Print” the form we get an error message: "Error while determining the form function module", and no form I shown. The ADS server is configured correctly and there are other forms that are actually working, for example the Travel Request form. We are running WAS 7.0 with SP12.
    Anyone has an idea what can cause the problem? Any help is greatly appreciated.
    Thanks in advance!
    Regards,
    Sophie

    Viktor,
    Thank you for your answer, it solved our problem!
    Regards,
    Sophie

  • Error: var g_objCurrentFormData_Error : There has been an error while processing the form

    Hi,.
    I have a InfoPath 2010 form which was published to SharePoint 2010.  I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
    2013 version (Version upgrade to SP 2013) is not done..
    In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
    XPathNavigator domNav = MainDataSource.CreateNavigator();
    XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
    if (!string.IsNullOrEmpty(fldUserurl.Value))
    string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
    HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
    HttpContext.Current.Response.Flush();
    HttpContext.Current.Response.End();
    The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
    "var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
    In the SP Logs, i found the below:
    Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.   
     at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()   
     at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()   
    How to fix this?
    Thanks

    Hi Venkatzeus,
    please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
    as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
    most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
    http://infopathdebugger.codeplex.com/
    http://www.infopathdev.com/forums/t/26330.aspx
    http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

    Using InfoPath 2013 browser enabled form.
    I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
    To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
    occurs), then back to original field to delete the contents (to raise the validation).
    I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
    There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
    Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
    I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
    I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
    checking?

    Hi,
    I have done a test in my SharePoint, and I met the same issue with you.
    I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank".  I put some content in the RT field, then delete the contents, I got the error message:"there has been an
    error while processing the form."
    Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
    OFFICE14\htmlchkr.dll" will solve the issue.
    https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
    But I just disabled "cannot be blank", and it solved the issue.
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Error while printing smart form..

    Hi all,
    I am getting an error while printing the invoice(smartform)
    "Error in spool C call: Error from TemSe..."
    it gives one pop also saying... Work process restarted; Session terminated.
    How to solve it?
    Thanks,
    Darshana

    Hi,
    Please refer to this link might help you.
    http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm

  • Travel Display Form: Error while determining the form function module

    Hi,
    In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
    "Error while determining the form function module"
    Can anyone have idea on this?
    Regards,
    Boobalan

    Hi,
    This error was due to Not supported platforms of ADS (Adobe Document services)
    It was not supported on itanium64 bit processors.
    Please check where the ADS is supported in service.sap.com/pam
    You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
    Please refer the ADS Config Doc for details.
    Hope you also solve this problem.
    Regards,
    Boobalan

  • Error While Printing the Report

    Post Author: saqib
    CA Forum: .NET
    HI All,I have joined this forum recently. I found this forum so helpful. I have one query which is: I am using crystal report 10 with Dot Net 1.1, I have created one web report which consists of 19 pages. Once i press the print button on the report after previewing it shows me the error reporting screen of windows. I have checked in event viewer it gives me the following error detail:The description for Event ID ( 1000 ) in Source ( Microsoft Internet Explorer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: iexplore.exe, 6.0.2800.1106, printcontrol.dll, 10.0.0.533, 0003bb45. Can any one helps me as i am totally stuck in that. Thanks in advance.  

    Try the following if your printer is a network printer
    1. Add Printers - select Local Printer
    2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
    3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
    4. Select the printer and printer type in "Add Printer" wizard.
    5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
    Hope this helps..
    Yogesh
    I am getting this error message while printing the report on Network Printer.
    "REP-1849: Failed while printing"
    Reports Server is not installed on my machine.
    On shared printer, it has no problems.
    Platform is Win2000. Report Builder 6.0.8.11.3
    Plz help !
    Thanks in advance !

  • Error while testing the form

    Hi,
    I am getting the following error while testing the Webform "ref: 10OZcTRWdS2gJf9A1t0bQ, AccessControlViolation"
    An error has occurred.
    The form does not exist. Please re-enter the web address as the link may be misspelled.
    [ref: 10OZcTRWdS2gJf9A1t0bQ, AccessControlViolation]
    Kindly help.

    Did you try to test again? The error happens sometimes when the new forms has just been created and FormsCentral hasn't saved the form yet. Please let me know if you have created some contents in the form and you still cannot test it.
    Thanks,
    Wenlan

  • Error While Running the form 10g

    Hi,
    I have a prob while running the form.
    Since the day I installed Form 10g at my home pc. Every time after i make any changes in the form, if i try to run the form after compiling and saving. It keeps asking me to enter scott/tiger@anthony to run the form.
    Even after running the form if i close it and to run the form again i have to enter scott/tiger@anthony.
    Wht culd be the prob plz help ?
    Rgds
    Anthony J
    Hi,
    I have all my tables in the scott schema also b4 running the form for the 1st time I do connect to the database thru File -> connect.
    Plz confirm what shld be the setting the preference option in the menu.
    Message was edited by:
    Anthony J

    Do you have a logon statement in the ON-LOGON trigger in your form? Do that, and it won't ask you to logon each time you run the form.
    Also make sure you connect to the database in Forms Builder by going to File -> Connect...

  • Error while printing the dunning form

    Hi all,
    I have a smartform for printing dunning form in FI from tcode F150...but while I schedule and try to take the print the job log entry shows error as "Form Z_DUNNING language EN is not active and has no errors".
    Can anyone tell why this error is comming, because I have checked the smartform and have activated it without any errors?
    Do help as its urgent.
    Regards,
    Anu.

    Hi,
    One more idea ...
    sometimes even though the smartform is active the error occurs which may be due to transports ....
    try generating  the smartform again in the first screen of the tcode SMARTFORMS ....from the menu ...smartforms-->generate ...
    then check ...
    regards,
    Ram

  • Error while printing the letters in Recruitment

    Hi, SAP Gurus.
    I am working on implementation of Recruitment module.I am facing a problem while printing a letter for confirm receipt, invitation for Interview etc.
    error is "Internal error in SAP OLE document container control
    Message no. SOFFICEINTEGRATION019"
    Pl suggest whether this error of customization or of BASIS.
    I want to get letters printed through std SAP system.
    Thanks in advance
    Regds
    Punit

    Hi
    make sure whether printer was connected to the system and check with basis

  • Error while activating the form

    when i was activating the form iam getting an error
    INVALID  HTTP Connection ADS.
    please give me a solution.
    Thanks&Regards
    Siva

    Hi
    Please check your ADS Conection for your system by Executing  Test Report "FP_TEST_00 "
    Procedure
       1. Log on to your SAP Net Weaver AS ABAP.
       2. Call transaction SA38 and enter the name FP_TEST_00.
       3. Choose Execute (F8). A dialog box is displayed.
       4. Enter FP_TEST_00 in the field Form.
           This is displayed as the default form name.
       5. Enter the name of the connection to the ADS. Enter the default name ADS, or, if you have               specified another name, the one you are using in your system.
       6. In the dialog box, choose Output in Print Preview.
       7. Enter an appropriate device type in the field Output Device.
       8. Choose Print Preview.
    On successful execution of the report, you find the Print Preview of the PDF form
    Regards
    Ashwini

  • RFC error while activating the Form

    hi all,
    i am trying to activate a new form or even while generating the pdf tab.this generates the pdf but with a popup 'no message though'.
    i get a success message of bytes transmitted ,code page 0000.
    but doesnot get activated.
    but when i execute it..
    i get an error message as below.
    system_error,
    message id : fprunx
    message no :001
    message : ADS : error when opening and RFC communication(110101)
    is it a compatibility error. aor what?
    i use windows o7,LDC 8.0,adobe reader 9.1 with flash player 10
    can anybody suggest me whats the error and hw to go about it???

    Use reports FP_TEST_00 a FPDESTINATION_CHECK (with destination checked true) to find out when your ADS connection will work. Your basis colleagues will use the same reports for their test.
    Learn that FP_* reports can be very useful for you in future, for testing or as a demo programs.
    Here are some basis links for you (or your colleagues) to read aout ADS and stuff:
    ADS Installation and configuration:
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
    Troubleshooting for ADS configuration:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?quicklink=index&overridelayout=true
    Landscape with ADS:
    http://csc-studentweb.lr.edu/swp/Berg/Conferences/SAP_NW2008_and_Admin_2008/BI/Track13/Track13_Session4.pdf
    ADS tests
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm
    regards Otto

  • Error while running the form

    Hi All,
    I am using oracle 10g form builder.
    I am able to connect to database.
    But When running the form I am facing an error saying TNS protocol adapter error.
    Can you please resolve it.
    Thanks
    Sunil
    Edited by: user9092293 on Sep 14, 2010 10:39 PM

    Sarah,
    At runtime the Windows Registry is generally not used. In Forms versions newer than 902 most environment settings are captured from default.env. Also, adding "LOCAL" simply gives you the ability to offer a default value which won't be displayed in the login dialog (or login string). This may not always be desired behavior. Essentially, this is just a cheat. It doesn't necessarily solve the problem, but instead just works around it.
    Sunil,
    Although what Sarah is suggesting might solve your issue, it might not result in the desired behavior. I would recommend you first isolate and correct the problem before implementing shortcuts. In your case, the error you are seeing is often (but not always) the result of not including the connect string (db name/alias) when trying to connect or the inability to locate tnsnames.ora. So, proving this first will offer at least two thing: 1) It will help you to understand how the logon process works... 2) It illustrates what caused the problem in the first place, which may be helpful knowledge if you see this problem in the future.
    Recommendation:
    1. Can you connect the Builder to the db? In other words, open the Builder and from the menu select File > Connect. Enter your username, password, and Database name
    2. If you can connect from within the Builder, while still connected, open your form in the Builder and click on the Run Form button found on the Builders menu/toolbar. Your form should run. If the same error appears then the problem is not related to the inclusion of the db name, as the Builder would have passed that information when the Run Form button was pressed. In this case, it suggests that the tnsnames.ora file cannot be found by the Runtime. If this is what you are seeing, refer back to my previous entry regarding updating your default.env with TNS_ADMIN.

  • Error while compiling the form

    Hi Everyone,
    Im getting the following error, while trying to compile the form.
    Compilation error on POST-QUERY trigger on XXX_CONTRACT_INFO data block:
    PL/SQL ERROR 0 at line 0, column 0
    ORA-12154: TNS:could not resolve service name.
    The instance which Im using is UP and running fine.
    I am using some database links to access data from a different schema, but even those db links are working fine.
    I am completly strucked up with this issue. Please help me.
    Thank you.
    Rams.

    Thanks for the reply.
    Im not running the form in local database and more over if the problem is with only tnsnames, then the form should completly through an error. But in this case, the form is compiling all its objects, but its unable to compile only one block.
    -Rams

Maybe you are looking for