Error While Processing Batch Session in Background Mode
Hi,
I am creating batch input sessions for Transaction FB01. Each Batch Session will have multiple transactions for FB01. My Batch Session is getting created. But when i am trying to process that batch session in backgroung mode ( thru SM35 ), it is failing. The Error says "Transaction Error". And when i process the same session in foreground mode, it is getting successfully processed. Any suggestion in this will be very helpful.
Hi,
Check in your program if you have properly handled the OK codes.after every transaction is complete the 'Back' button has to be triggered.That could be the reason it's working in FG mode and not BG mode.Generally,OK Code is '/EBCK'.This should work.
Similar Messages
-
Error while running Batch Session for T.Code F.19
While processing T.Code F.19 in Batch Input Sessions, the log shows following error: "For document type SA, an entry is required in field Reference. Can anyone please help me resolve this issue?
Thanks in advance!
Regards,
AMDHi
If your Batch input data is very less, run in foreground and update it manually or
Goto GGb1 select Fi accounting and create substitution under header of the document and keep necessary settings like below
Prerequisite
BKPF-BUKRS = xyz AND SYST-TCODE = F.19 and SYST-UNAME = your user id
Substitution
BKPF-XBLNR = keep any default value
Reg
Vishnu -
SM35 Re-processing of Incorrect/Error session in Background Mode
Hi all,
I am trying to reprocess a session in SM35 which is in Error status. Here I am a facing an issue, if I reprocess this session in background mode then it says that Batch input data is not available for a screen which is already processed. Ideally it should start from the screen where it threw error in the first run. If I select mode as Foreground or Display error then session is getting processed correctly.
Note:
If the session is in Ready to Process state then processing in background works perfectly fine. Has anyone came across this problem ?
Has anyone tried reprocessing Incorrect Session in background mode ??????
Regrads,
AntonyThanks Sandra,
Indeed I understood the problem. And the problem is that transaction KEBC is always executed correctly & since its processed correctly its removed from the BDC Queue
Here transaction KEBC, sets a Memory Parameter, and transaction KEU2, first checks whether the memory parameter is initial, if found intial it pops-up a screen and makes the user enter it. In my case KEBC always run successfully
As you rightly suggested when session is in error, transaction KEBC is not getting called again to set the memory parameter & its throwing the pop-up from the transaction KEU2 to be entered by the user. ( BDCDATA currently dosent handle this Pop-up).
I could have omitted the KEBC transaction, but handling this pop-up from transaction KEU2 becomes tricky since it will only pop-up if the memory parameter is initial. And unfortunately Pop-up is the first screen in the sequence for transaction for KEU2 & nothing can be done in coding level to call KEU2 with the pop-up in all scenarios(Even when Memmory varaible is set) !
So I am kind of in a dilema, how to handle this? What I am suggesting to the Functional consultant is that let the session be only run in background mode (as it will be always in a new internal session memory variable will always be inital ) & I will record this pop-up in my BDC omitting transaction KEBC.
Do you have anyother solution for this?
Or is there any option to re process even the successfull transacations ? -
Error while executing Batch Risk Analysis job in full sync mode
Hi Gurus,
I am getting following error while executing Batch Risk Analysis job in full sync mode for the first time, please help me out.
May 12, 2011 3:57:26 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
May 12, 2011 3:59:53 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchSyncAndAnalysis
INFO: --- Batch Sync/Analysis/Mgmt Report completed --- elapsed time: 104907817 ms
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 100 Status: Error
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error Job not completed
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=100, status=2, message=Error Job not completed
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>100----
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: Daemon idle time longer than RFC time out, terminating daemon [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0
May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 terminiated
May 12, 2011 4:00:35 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:01:36 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:02:37 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
May 12, 2011 4:02:37 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 started
May 12, 2011 4:02:38 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
FINEST: Another Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 is already runningHi,
May be it worked in your case How the job names going to affect the execution of the job. The issue is purely because of RFC timeout (As per the logs). I recommend to change the parameter in the configuration tab as recommended by Sunny in the previous thread.
Regards,
Raghu -
Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
ThanksHi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Creating database problem with ORA-01519: error while processing file '' ne
Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek -
Error while processing /libs/commerce/content/import.html
hello every body;
I wanna import a catalog from hybris to cq5, I fill the form when I click import catalog; it gives me this error:
Error while processing /libs/commerce/content/import.html
thanks for your help;thanks sham;
ok; it's resoleved now, it was a problem in the version of cq,i was using cq5.4,it dosn't work with this version;
but I have an other problem here where I imported a catalog from hybris; the function getProductPrice(product) doesn't work;in the file /apps/geometrixx-outdoors/components/nav_products/listitem_product.jsp
i the line: final String price = session.getPriceInfo(product); anit gives me the error:
Caused by: java.lang.NullPointerException
at com.adobe.cq.commerce.hybris.impl.HybrisSessionImpl.getProductPriceInfo(HybrisSessionImpl .java:184)
at com.adobe.cq.commerce.hybris.impl.HybrisSessionImpl.getProductPrice(HybrisSessionImpl.jav a:211)
at com.adobe.cq.commerce.hybris.impl.HybrisSessionImpl.getProductPrice(HybrisSessionImpl.jav a:207)
thanks for your help; -
Error while processing Idoc - Urgent!
Hi all,
I am getting the following error while processing the IDOC :
"Application Document not posted "
Status = 51
Error Details :
" V51VP - item was not found - process cancelled ".
Any ideas, what's wrong?
Please Help.
Regards,Hi,
U might be not passing any item value to idoc which might be necessary...wat u can do is
goto WE19 TCODE,give the error idoc number and press execute button,now in the next screen CLICK ON INBOUND FUNCTION MODULE in the application tool bar,now give the FM NAME which triggers teh idoc,check the check box IN DEBUG MODE and radio button IN FOREGROUND....Now it will take to inside of the FM ,now debug and see where it caught the error..
Regards,
Nagaraj -
Inbound IDOC error while processing Invoice
Hi All,
I received the following error while processing an Invoice on an inbound IDOC:
<b>Field BSEG-MEINS - does not exist in the screen SAPMF05A 0300</b>
Message no. 00349
<b>Diagnosis</b>
The specified field does not exist on the screen
<b>Procedure</b>
Check your batch input data
Any assistance will be greatly appreciated.
Thanks, InnoHi
Please check which G/L Accounts were involved and verify that the Field BSEG-MEINS was set to 'optional' in Transaction OB14. The correct Field Status Variant
for the Company Code can be viewed with Transaction OBY6 and the Field
Status Group for G/L Account can be found with Transaction FS00 under
the Create/bank/inter Tab. This should eliminate the Error 00 349.
Regards
Javier -
WS And Web Dynpro: Error while processing document security
Hi all,
We have a problem when use Web Services (stateless session bean) in Web Dynpro.
When two users calls the same web dynpro in the same time we have this error:
Errore in: it.sap.mdm.pdcmodelcomponent.wdp.InternalLookUpModelController getLookUpTable:
Class___: com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException Additional Info:
Message_: Exception on execution of web service on destination 'FS_MDM_PDC' for operation 'getLookupTable' in interface 'ZMDM_FS_PDCVi_Document'
Causa__:
Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].
If I call the same web dynpro ,without other user, it's ok.
Where is the problem?
I have to congigure some parameter in J2ee???Hi
Use this pdf to implement Mutual Exclusion
http://java.sun.com/developer/Books/performance2/chap3.pdf
http://navet.ics.hawaii.edu/~casanova/courses/ics432_fall08/slides/ics432_jmonitors.ppt#313,10,Synchronizing on Multiple Objects
thanks -
Hi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you helpHi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you help -
Error while processing message to remote system
Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
RaghavendraHi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha. -
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
I receive the following error by creating dataabse as below sql:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
ORA-27039: create file failed, file size limit reached
Additional information: 1
CREATE DATABASE SISDEV04
LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
NOARCHIVELOG
CHARACTER SET ZHT16BIG5
NATIONAL CHARACTER SET ZHT16BIG5
DATAFILE '/sisdev04/dbs/system01.dbf'
SIZE 210M AUTOEXTEND OFF
, '/sisdev04/dbs/rbs01.dbf'
SIZE 105M AUTOEXTEND OFF
, '/sisdev04/dbs/temp01.dbf'
SIZE 105M AUTOEXTEND OFF
, '/sisdev04/dbs/users01.dbf'
SIZE 1050M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_index_ivr01.dbf'
SIZE 105M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_ivr01.dbf'
SIZE 21M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_index_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
I have issue df to check the directory sisuat04
/ >df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 98304 45664 54% 2446 10% /
/dev/hd2 2097152 78992 97% 30280 12% /usr
/dev/hd9var 65536 20536 69% 308 4% /var
/dev/hd3 294912 262432 12% 147 1% /tmp
/dev/hd1 49152 5712 89% 1290 21% /home
/dev/mfcobol 81920 25520 69% 608 6% /mfcobol
/dev/magiclv 81920 22304 73% 346 4% /usr/magic
/dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
/dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
/dev/sisappllv 229376 173288 25% 1846 7% /sisappl
/dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
/dev/noteslv0 1048576 541352 49% 2195 2% /notes
/dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
/dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
/dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
/dev/u01lv 4194304 128720 97% 11697 3% /u01
/dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
Is is still a not enough space problem?I receive the following error by creating dataabse as below sql:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
ORA-27039: create file failed, file size limit reached
Additional information: 1
CREATE DATABASE SISDEV04
LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
NOARCHIVELOG
CHARACTER SET ZHT16BIG5
NATIONAL CHARACTER SET ZHT16BIG5
DATAFILE '/sisdev04/dbs/system01.dbf'
SIZE 210M AUTOEXTEND OFF
, '/sisdev04/dbs/rbs01.dbf'
SIZE 105M AUTOEXTEND OFF
, '/sisdev04/dbs/temp01.dbf'
SIZE 105M AUTOEXTEND OFF
, '/sisdev04/dbs/users01.dbf'
SIZE 1050M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_index_ivr01.dbf'
SIZE 105M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_ivr01.dbf'
SIZE 21M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
, '/sisdev04/dbs/ts_index_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
I have issue df to check the directory sisuat04
/ >df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 98304 45664 54% 2446 10% /
/dev/hd2 2097152 78992 97% 30280 12% /usr
/dev/hd9var 65536 20536 69% 308 4% /var
/dev/hd3 294912 262432 12% 147 1% /tmp
/dev/hd1 49152 5712 89% 1290 21% /home
/dev/mfcobol 81920 25520 69% 608 6% /mfcobol
/dev/magiclv 81920 22304 73% 346 4% /usr/magic
/dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
/dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
/dev/sisappllv 229376 173288 25% 1846 7% /sisappl
/dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
/dev/noteslv0 1048576 541352 49% 2195 2% /notes
/dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
/dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
/dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
/dev/u01lv 4194304 128720 97% 11697 3% /u01
/dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
Is is still a not enough space problem? i think you have specified 1050m for users01.dbf file, your file system /sisdev04 has something like
1.5gb of free space. it failed because of lack of free space. may be you can reduce your datafile size or try to
create in another filesystem. -
Object failed to run due to an error while processing on the Job Server
when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT.
Maybe you are looking for
-
How to insert a bean variable into MySql using jsp
Hi, I have a problem that I have been trying to work out for ages..unsuccessfully. My web-site takes 2 inputs off a user...does a calculation on them and returns the result to the user. I want to then use another jsp page that will take this result a
-
when installing Elements Photo 13 receiving a missing file message when installing file 2 of 2 p
-
How to pass a complex type as input for a Java class in Oracle 11g?
Hi All, This is my Parent Class.. package ADFapplnPackage.model; public class ParentClass { String Name; int age; public ParentClass() { super(); This is my ChildClass : package ADFapplnPackage.model; public class ChildClass { public ChildClass() { s
-
Best practices for creating movie from still images?
I have created an architectural model in *someone else's* software, and animated a camera in *someone else's* software, and rendered that out to still images. I rendered every 5th frame (for a total of 401 frames) in order to save time on rendering.
-
11g TP3 [ER] Offline database / Expression builder for naming conventions
I would be nice to have a way to define some project specific standards for name generated automatically by jdev. In big projects its really not fun to update each foreign key and foreign key attributes to be conform to some standards. Why not using