Error While processing FPG1 transaction

Hi
I am trying to transfer a recon key to FI thru FPG1 transaction. But I am getting the error
F5808: Field material is a required field for xxxx GL account in company Code XXXX/ xxxx GL account . Could anyone throw some light on this error and how to get around it.
Thanks

Hi,
Have U checked Field Status group for the GL Account assigned. i.e. in FS00, u assign FSG. Then go to OBC4, make the field optional / mandatory.
Regards
Raghu V

Similar Messages

Error while comitting a transaction in oSB. The following is the error stack

Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
 java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
 java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
 at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
 at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
 at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
 at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
 at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
 at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
 at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
 at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
 at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
 at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
 at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

Error while processing payment through F110

Hello
I am getting the following error while processing payment through F110
> Payment method selection for items due now to the amount of EUR          287.32-
> Payment method "Q" is being checked
> Bank details are being checked
>     Customer/vendor bank details are being checked
>   System reads house banks and checks if they are allowed
> Our bank BBVA is being checked
> Bank different from the specified bank CAIXA in master record or items
>   House bank is selected ...
> No permitted payment method exists
Information re. customer 220912 / paying company code ES4 ...
... payment not possible because of reported error
I have created one payment method "Q" & in ranking order only House bank given as BBVA. I m not able to under stand where to make correction to make this resolved

Check if different House bank is assigned in Customer Master record - Co code - Payment transactions.

Error while processing data packets

I am getting following error while processing into Further processing.
"Request REQU_4B76NS5NMRU1Z4QONVEFRYTGI , data package 000526 incorrect with status 9"
Diagnosis
    Request REQU_4B76NS5NMRU1Z4QONVEFRYTGI , data package 000526 contains errors with status 9 in
    table 'RSODSACTREQ' but this data package is missing in the return
    structure.
System response
    The data package is entered in the return structure as incorrect.
amit

Hi,
Go to the transaction RSRV and do the test for your ODS or info cube.
If there comes any error then correct that error by the icon on the top.
Then try to load it again.
Regards,
Sumit

Error while posting tresury transaction

hi gurus,
i got the error , while excuting treasury transaction:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '1000' has currency type '10'. This currency type has the currency key 'SAR' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'EUR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '1000' must have currency key 'EUR' when the data is transmitted.)
Kinldy help to resolve this issue.

Hi All,
I am facing the same issue..Can U pls help me in resolving the error.
ERROR:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '6242' has currency type '10'. This currency type has the currency key 'SGD' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'INR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '6242' must have currency key 'INR' when the data is transmitted.
Regards,
Venkat

Inbound IDOC error while processing Invoice

Hi All,
I received the following error while processing an Invoice on an inbound IDOC:
Field BSEG-MEINS - does not exist in the screen SAPMF05A 0300
Message no. 00349
Diagnosis
The specified field does not exist on the screen
Procedure
Check your batch input data
Any assistance will be greatly appreciated.
Thanks, Inno

Hi
Please check which G/L Accounts were involved and verify that the Field BSEG-MEINS was set to 'optional' in Transaction OB14. The correct Field Status Variant
for the Company Code can be viewed with Transaction OBY6 and the Field
Status Group for G/L Account can be found with Transaction FS00 under
the Create/bank/inter Tab. This should eliminate the Error 00 349.
Regards
Javier

[J2EE:160149]Error while processing library references

Hi,
I have an application which was working 9.2.1. I have deployed this application to 9.2.3. I have modified weblogic-application.xml, but it is giving these erros:
An error occurred during activation of changes, please see the log for details.
[J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml:
[Extension-Name: beehive-controls-1.0, Specification-Version: 1, Implementation-Version: 1.0, exact-match: false],
[Extension-Name: wls-commonslogging-bridge, Specification-Version: 1, Implementation-Version: 1.0, exact-match: false],
[Extension-Name: weblogic-controls-1.0, Specification-Version: 1, Implementation-Version: 1.0, exact-match: false],
[Extension-Name: wlp-tools-support-app-lib, Specification-Version: 9.2, Implementation-Version: 9.2.3, exact-match: false],
[Extension-Name: wlp-webdav-app-lib, Specification-Version: 9.2, Implementation-Version: 9.2.3, exact-match: false],
[Extension-Name: wlp-services-app-lib, Specification-Version: 9.2, Implementation-Version: 9.2.3, exact-match: false],
[Extension-Name: p13n-app-lib, Specification-Version: 9.2, Implementation-Version: 9.2.3, exact-match: false].
How can I resolve these errors?

Hi,
Weblogic Server has two clusters and admin server. The referenced libraries didnt targeted to admin server. Because of that it was giving these errors. I have targeted to admin server all referenced libraries and I have deployed it.
But,
When I say start my application, I am taking this error:
[EJB:010127]Incorrect DataSource type detected.
The DataSource with JNDI name 'weblogic.jdbc.jts.commercePool',
specified in the RDBMS deployment descriptor for the EJB 'TrackedAnonymous'
does not support global transactions. The EJB container requires a DataSource
that supports global transactions to be specified for transactions to be managed correctly.
Errors were encountered while performing this operation
[EJB:010127]Incorrect DataSource type detected. The DataSource with JNDI name 'weblogic.jdbc.jts.commercePool', specified in the RDBMS deployment descriptor for the EJB 'TrackedAnonymous' does not support global transactions. The EJB container requires a DataSource that supports global transactions to be specified for transactions to be managed correctly.
Here are my data sources:
cgDataSource
cgDataSource-nonXA
DSFDS
IXPOC9DATASOURCE
NDSDataSource
p13nDataSource
portalDataSource
portalDataSourceAlwaysXA
portalDataSourceNeverXA
samplesDataSource
All of these datasources targeted to NDSCluster, NDSAdminServer.
How can I solve this problem?

Application error while processing DespatchDeliveryNotification_IN proxy

Hello Gurus,
I am seeking a help from you all. When I try to create ASNs using DespatchDeliveryNotification_IN proxy am getting an 'Application Error' stating 'Sender party is Invalid'. But with the same sender ID I have created so many ASNs manually. What would be exact problem?
My requirement is, I have to create ASNs using DespatchDeliveryNotification_IN, it will be called from PI system, we are passing almost all the information, in SPROXY transaction message status showing red flag which means that error. In trace I found that 'Error while processing pipeline' - 'Sender party is Invalid'. Please help me out
One more point I wanted to inform you, when I tried to execute provider class(/SCA/CL_BIF_DESDELVRY_IN) method (/SCA/II_BIF_DESDELVRY_IN~EXECUTE_ASYNCHRONOUS) from SE24 which is associated with DespatchDeliveryNotification_IN proxy, with out any input data I got an exception 'Exception /SCA/CX_BIF_DESDELVRY triggered' and message 'Application Error', So is it any way related with configurations?
Thanks in advance!!
Pallu

Hey,
Can you check the HTTP Destination is good,
Cheers
Agasthuri

NetInstall : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"

Hi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you help

Hi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you help

Error while processing message to remote system

Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
Raghavendra

Hi,
>>>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha.

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Creating database problem with ORA-01519: error while processing file '' ne

Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek

ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401

I receive the following error by creating dataabse as below sql:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
ORA-27039: create file failed, file size limit reached
Additional information: 1
CREATE DATABASE SISDEV04
     LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
          GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
     NOARCHIVELOG
     CHARACTER SET ZHT16BIG5
     NATIONAL CHARACTER SET ZHT16BIG5
     DATAFILE '/sisdev04/dbs/system01.dbf'
          SIZE 210M AUTOEXTEND OFF
     , '/sisdev04/dbs/rbs01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/temp01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/users01.dbf'
SIZE 1050M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ivr01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ivr01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
I have issue df to check the directory sisuat04
/ >df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 98304 45664 54% 2446 10% /
/dev/hd2 2097152 78992 97% 30280 12% /usr
/dev/hd9var 65536 20536 69% 308 4% /var
/dev/hd3 294912 262432 12% 147 1% /tmp
/dev/hd1 49152 5712 89% 1290 21% /home
/dev/mfcobol 81920 25520 69% 608 6% /mfcobol
/dev/magiclv 81920 22304 73% 346 4% /usr/magic
/dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
/dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
/dev/sisappllv 229376 173288 25% 1846 7% /sisappl
/dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
/dev/noteslv0 1048576 541352 49% 2195 2% /notes
/dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
/dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
/dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
/dev/u01lv 4194304 128720 97% 11697 3% /u01
/dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
Is is still a not enough space problem?

I receive the following error by creating dataabse as below sql:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
ORA-27039: create file failed, file size limit reached
Additional information: 1
CREATE DATABASE SISDEV04
     LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
          GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
     NOARCHIVELOG
     CHARACTER SET ZHT16BIG5
     NATIONAL CHARACTER SET ZHT16BIG5
     DATAFILE '/sisdev04/dbs/system01.dbf'
          SIZE 210M AUTOEXTEND OFF
     , '/sisdev04/dbs/rbs01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/temp01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/users01.dbf'
SIZE 1050M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ivr01.dbf'
SIZE 105M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ivr01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
     , '/sisdev04/dbs/ts_index_ems01.dbf'
SIZE 21M AUTOEXTEND OFF
I have issue df to check the directory sisuat04
/ >df
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 98304 45664 54% 2446 10% /
/dev/hd2 2097152 78992 97% 30280 12% /usr
/dev/hd9var 65536 20536 69% 308 4% /var
/dev/hd3 294912 262432 12% 147 1% /tmp
/dev/hd1 49152 5712 89% 1290 21% /home
/dev/mfcobol 81920 25520 69% 608 6% /mfcobol
/dev/magiclv 81920 22304 73% 346 4% /usr/magic
/dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
/dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
/dev/sisappllv 229376 173288 25% 1846 7% /sisappl
/dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
/dev/noteslv0 1048576 541352 49% 2195 2% /notes
/dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
/dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
/dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
/dev/u01lv 4194304 128720 97% 11697 3% /u01
/dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
Is is still a not enough space problem? i think you have specified 1050m for users01.dbf file, your file system /sisdev04 has something like
1.5gb of free space. it failed because of lack of free space. may be you can reduce your datafile size or try to
create in another filesystem.

Error While processing FPG1 transaction

Similar Messages

Maybe you are looking for