Error while processing SHPMNT in using big pack size 20 but not if 1

Hi Experts,
I am trying to to process status 64 SHPMNT IDocs via background job using program RBDAPP01.
When I try to use Pack Size 20 (minimum preferred/suggested by SAP for better performance), I am encountering the status 54 error message "Processing terminated because not required or possible" when the SHPMNT IDocs are pointing to the same Shipment document.
According to the error message:
Processing of this IDoc is terminated because it is unnecessary or impossible. Reasons for termination may include:
1. The IDoc appears twice in the IDoc packet you just processed
2. The data included in the IDoc you entered does not provide unique identification of the application document concerned. For example, you enter the primary identification using field EXTI1. There could be two application documents with the same 'external identification 1'. In this case, there would be no way to tell which document should be changed.
So, I got the idea of trying Pack Size 1 and it worked!
So in conclusion, SAP (by default) does not allow processing of multiple SHPMNT IDocs referring to the same Shipment document in one packet.
Is it possible to disable/turn off this check so that SHPMNT IDocs will be processed using Pack Size 20 even if they are referring to the same Shipment?
Thanks and Regards,
Ruix

Hi Ruix,
We are running to exactly similar problem, Can you please share how you have resolved this issue?
Many thanks in advance!!!!
Regards,
Kumar

Similar Messages

  • Error while processing Distribution Lot

    Hi Experts,
    I am getting the following error while processing distribution lot using TCode IUEEDPPLOTAALC5
    No Customizing settings defined for outbound interface
    Cannot Posted distribution lot with key PPP10P000003
    Let me know if I have missed any config
    Thanks
    Satyajeet

    Hi
    Can you please tell me what is the 5 digit code of the error message?
    Regards
    Olivia

  • Error while processing message to remote system

    Hi,
    I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
    I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
    Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
    Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
    The previous thread relating this is:
    Process Integration (PI) & SOA Middleware
    Requesting for a solution.
    Regards,
    Raghavendra

    Hi,
    >>><i>So i tried creating a RFC(using sm59)in the R/3,
    When i try to import the RFC i have created, I am not able to see the one i have created.</i>
    In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
    This will enable your RFC to be called by an application outside the R/3 system.
    >>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
    You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
    You are not able to find your RFC since it has not been remotely enabled or has not been activated.
    Regards,
    Smitha.

  • ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401

    I receive the following error by creating dataabse as below sql:
    ORA-01501: CREATE DATABASE failed
    ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
    ORA-27039: create file failed, file size limit reached
    Additional information: 1
    CREATE DATABASE SISDEV04
         LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
              GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
         NOARCHIVELOG
         CHARACTER SET ZHT16BIG5
         NATIONAL CHARACTER SET ZHT16BIG5
         DATAFILE '/sisdev04/dbs/system01.dbf'      
              SIZE 210M AUTOEXTEND OFF
         , '/sisdev04/dbs/rbs01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/temp01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/users01.dbf'
    SIZE 1050M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ivr01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ivr01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
    I have issue df to check the directory sisuat04
    / >df
    Filesystem 512-blocks Free %Used Iused %Iused Mounted on
    /dev/hd4 98304 45664 54% 2446 10% /
    /dev/hd2 2097152 78992 97% 30280 12% /usr
    /dev/hd9var 65536 20536 69% 308 4% /var
    /dev/hd3 294912 262432 12% 147 1% /tmp
    /dev/hd1 49152 5712 89% 1290 21% /home
    /dev/mfcobol 81920 25520 69% 608 6% /mfcobol
    /dev/magiclv 81920 22304 73% 346 4% /usr/magic
    /dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
    /dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
    /dev/sisappllv 229376 173288 25% 1846 7% /sisappl
    /dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
    /dev/noteslv0 1048576 541352 49% 2195 2% /notes
    /dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
    /dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
    /dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
    /dev/u01lv 4194304 128720 97% 11697 3% /u01
    /dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
    Is is still a not enough space problem?

    I receive the following error by creating dataabse as below sql:
    ORA-01501: CREATE DATABASE failed
    ORA-01519: error while processing file '?/rdbms/admin/sql.bsq' near line 401
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01119: error in creating database file '/sisdev04/dbs/users01.dbf'
    ORA-27039: create file failed, file size limit reached
    Additional information: 1
    CREATE DATABASE SISDEV04
         LOGFILE GROUP 1 ('/sisdev04/dbs/log01a.dbf','/sisdev04/dbs/log01b.dbf') SIZE 10M,
              GROUP 2 ('/sisdev04/dbs/log02a.dbf','/sisdev04/dbs/log02b.dbf') SIZE 10M
         NOARCHIVELOG
         CHARACTER SET ZHT16BIG5
         NATIONAL CHARACTER SET ZHT16BIG5
         DATAFILE '/sisdev04/dbs/system01.dbf'      
              SIZE 210M AUTOEXTEND OFF
         , '/sisdev04/dbs/rbs01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/temp01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/users01.dbf'
    SIZE 1050M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ivr01.dbf'
    SIZE 105M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ivr01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
         , '/sisdev04/dbs/ts_index_ems01.dbf'
    SIZE 21M AUTOEXTEND OFF
    I have issue df to check the directory sisuat04
    / >df
    Filesystem 512-blocks Free %Used Iused %Iused Mounted on
    /dev/hd4 98304 45664 54% 2446 10% /
    /dev/hd2 2097152 78992 97% 30280 12% /usr
    /dev/hd9var 65536 20536 69% 308 4% /var
    /dev/hd3 294912 262432 12% 147 1% /tmp
    /dev/hd1 49152 5712 89% 1290 21% /home
    /dev/mfcobol 81920 25520 69% 608 6% /mfcobol
    /dev/magiclv 81920 22304 73% 346 4% /usr/magic
    /dev/sispro02lv 6553600 6347792 4% 18 1% /sisdev02
    /dev/sispro03lv 6553600 6347784 4% 19 1% /sisdev03
    /dev/sisappllv 229376 173288 25% 1846 7% /sisappl
    /dev/lvbaklog 98304 85552 13% 68 1% /app/bak_log
    /dev/noteslv0 1048576 541352 49% 2195 2% /notes
    /dev/noteslv1 4194304 1479304 65% 5269 2% /notesrv
    /dev/noteslv2 2097152 898128 58% 51 1% /notesrv/sitesch
    /dev/lvoracle 2097152 237240 89% 8280 4% /opt/oracle
    /dev/u01lv 4194304 128720 97% 11697 3% /u01
    /dev/sisdev01lv 4096000 3021552 27% 27 1% /sisdev04
    Is is still a not enough space problem? i think you have specified 1050m for users01.dbf file, your file system /sisdev04 has something like
    1.5gb of free space. it failed because of lack of free space. may be you can reduce your datafile size or try to
    create in another filesystem.

  • InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

    Using InfoPath 2013 browser enabled form.
    I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
    To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
    occurs), then back to original field to delete the contents (to raise the validation).
    I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
    There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
    Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
    I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
    I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
    checking?

    Hi,
    I have done a test in my SharePoint, and I met the same issue with you.
    I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank".  I put some content in the RT field, then delete the contents, I got the error message:"there has been an
    error while processing the form."
    Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
    OFFICE14\htmlchkr.dll" will solve the issue.
    https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
    But I just disabled "cannot be blank", and it solved the issue.
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Error while processing sales order as factory calendar missing.

    "factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

    Hi Malik, How are you? I'm sorry to trouble you,
                   Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
    the topic "How to update Factory Calendar in SRM", and might I have the same
    problem. It's with the "factory calendar".
    In transaction va02 when I choose a Delivery Date, and I sent it to process, as
    a result in the "shipping tab" it calculated to the first item one date, and to
    the rest one date different.  I don't know What it happen?
    I debugged the program and I saw that to the first item use to calculate the
    date is the function  'APO_SCHEDULING', and to the rest item use
    'SD_SCHEDULING', and until here I come.
    How can I do to what the dates calculated are the same? or What would be the
    problem?
    I need the dates calculated are equal.
    I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
    correct?
    Thanks In Advance,
    My best regards,

  • Error while processing library references

    Hi guys
    I tried to add BI Composer to ADF application. I did all steps and when I want to deploy my application from JDEV to destination WLS it has error :
    [06:04:17 PM] [Deployer:149193]Operation 'deploy' on application 'application1' has failed on 'AdminServer'
    [06:04:17 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application application1 on AdminServer.: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false], [Extension-Name: oracle.bi.adf.model.slib, exact-match: false], [Extension-Name: oracle.jsp.next, exact-match: false]..
    [06:04:17 PM] Weblogic Server Exception: weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false], [Extension-Name: oracle.bi.adf.model.slib, exact-match: false], [Extension-Name: oracle.jsp.next, exact-match: false].
    [06:04:17 PM] See server logs or server console for more details.
    [06:04:17 PM] weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false], [Extension-Name: oracle.bi.adf.model.slib, exact-match: false], [Extension-Name: oracle.jsp.next, exact-match: false].
    [06:04:17 PM] #### Deployment incomplete. ####
    [06:04:17 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    Could anybody help me to how solve it ?
    Thanks in Advance

    I solved it,
    Firs of all your domain which you are going to deploy BI Composer should extended by Oracle JRF, if you install JDev on WLS, automatically it adds those needed library.
    In other hand generally any where you got this message "Unresolved application library references", manually you can find that library (sometime as .ear sometime as .war and etc.) [ you can search it in other installed domain or in internet ] , and in WLS console go to deployment and deploy it.
    I hope it can be useful :)

  • Error while processing library references. Unresolved application library r

    Hi Experts,
    When i try to deploy .ear file in weblogic 11g server (linux 64-bit redhat OEL 5.46), I am facing following error.
    Please help me out to resolve it.
    Eror Message
    <May 6, 2011 7:32:40 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1304690560384' for task '8'. Error is: 'weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: org.apache.commons.httpclient, exact-match: false].'
    weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: org.apache.commons.httpclient, exact-match: false].
    at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
    at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
    at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
    Truncated. see log file for complete stacktrace
    >
    <May 6, 2011 7:44:58 PM IST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
    <May 6, 2011 7:44:58 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
    [JCABindingManager] : This operation is not supported for JCA based MDB
    <May 6, 2011 7:45:00 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <May 6, 2011 7:45:00 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    <May 6, 2011 7:45:00 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default[3]" listening on fe80:0:0:0:be30:5bff:fed3:5db0:8001 was shutdown.>
    <May 6, 2011 7:45:00 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on 10.108.26.246:8001 was shutdown.>
    <May 6, 2011 7:45:00 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default[7]" listening on 0:0:0:0:0:0:0:1:8001 was shutdown.>
    <May 6, 2011 7:45:00 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default[6]" listening on 127.0.0.1:8001 was shutdown.>
    <May 6, 2011 7:45:00 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default[2]" listening on fe80:0:0:0:200:ff:fe00:0:8001 was shutdown.>
    <May 6, 2011 7:45:00 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 192.168.122.1:8001 was shutdown.>
    <May 6, 2011 7:45:00 PM IST> <Notice> <Server> <BEA-002607> <Channel "Default[4]" listening on fe80:0:0:0:fcff:ffff:feff:ffff:8001 was shutdown.>
    <May 6, 2011 7:45:01 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:01 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:01 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:01 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:01 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:05 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    [TopLink Info]: 2011.05.06 19:45:06.235--ServerSession(255740887)--deferred_session logout successful
    [TopLink Info]: 2011.05.06 19:45:06.236--ServerSession(256131953)--tracking_session logout successful
    <May 6, 2011 7:45:06 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:06 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:06 PM IST> <Warning> <oracle.adf.share.ADFContext> <BEA-000000> <Automatically initializing a DefaultContext for getCurrent.
    Caller should ensure that a DefaultContext is proper for this use.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <May 6, 2011 7:45:09 PM> <FINEST> <NodeManager> <Waiting for the process to die: 20074>
    <May 6, 2011 7:45:09 PM> <INFO> <NodeManager> <Server was shut down normally>
    <May 6, 2011 7:45:09 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
    Thanks
    Phani

    George,
    To solve my problemn I uninstall my JDev, remove all folders (Oracle_home, and JDeveloper folder in users - app data - roaming). Install again, and get Webcenter Bundle from Help - Updates. Before a uninstall I was using a bundle that a have here in my machine.
    Thks

  • Error while processing library references. Unresolved application library

    Hi All,
    I created one ADF task-flow,in which I used content from share point, and then I converted portlets and deployed into integrated WLS server.and then I consumed thoese portlets into web-center spaces its working file.
    but i want to deploy those portlets into standalone server while deploying those I am getting following Errors. I am using 11.1.1.1.6 version for all my development.(Jdeveloper,webcenter and all).
    [07:48:08 PM] [Deployer:149193]Operation 'deploy' on application 'SP2010_application1' has failed on 'AdminServer'
    [07:48:08 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application SP2010_application1 on AdminServer.: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.content.jcr.sharepoint, Specification-Version: 11.1.1, exact-match: false]..
    [07:48:08 PM] Weblogic Server Exception: weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.content.jcr.sharepoint, Specification-Version: 11.1.1, exact-match: false].
    [07:48:08 PM] See server logs or server console for more details.
    [07:48:08 PM] weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.content.jcr.sharepoint, Specification-Version: 11.1.1, exact-match: false].
    [07:48:08 PM] #### Deployment incomplete. ####
    [07:48:08 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
    please take a look into this. resolve me.
    regards
    Siva

    George,
    To solve my problemn I uninstall my JDev, remove all folders (Oracle_home, and JDeveloper folder in users - app data - roaming). Install again, and get Webcenter Bundle from Help - Updates. Before a uninstall I was using a bundle that a have here in my machine.
    Thks

  • Error while processing message payload Element PI SXMB_MONI (ECC to TM)

    Dear Experts,
    while processing an XML message in TM using receiver interface IntracompanyTransportationRequestRequest_In , we encounter an error message.
    <SAP:Stack>Error while processing message payload Element &#39;StockTransportOrderReferenceIndicator&#39; missing</SAP:Stack>  
    <SAP:Retry>M</SAP:Retry>
    ssee screenshot attached.
    The field StockTransportOrderReferenceIndicator cannot be located in ECC and I cannot find what the system is expecting to populate here.
    Can somebody propose an approach on how to investigate into this error message for the solution?
    thanks a lot
    Salvador

    Hi Salvador,
    Thanks for your reply. We were able to fix that issue. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise. Did you happen to face any similar kind of issue during your implementation ?
    Thanks & Regards,
    Aunkur De

  • Error while processing message

    I have WS2RFC interface that use to work. I recieve in the RWB this error message from the RFC Reciever.
    10/6/08 1:20:10 PM aa98b6f0-9398-11dd-94cf-0017a43cc516 Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.
    any ideas?
    Kfir

    In RFC channel increase the maximum connections paramter value to 5. Save and activate.
    Thanks,
    Gujjeti

  • Error while processing audit message

    hi
    I'm running a reconciliation, and throws me the following error .
    please help me
    ERROR,28 Aug 2009 03:50:32,492,[XELLERATE.AUDITOR],Error while processing audit message
    java.lang.NullPointerException
    at com.thortech.xl.audit.engine.AuditEngine.processSingleAudJmsEntry(Unknown Source)
    at com.thortech.xl.audit.engine.AuditEngine.processOfflineNew(Unknown Source)
    at com.thortech.xl.audit.engine.jms.XLAuditMessageHandler.execute(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.MessageProcessUtil.processMessage(Unknown Source)
    at com.thortech.xl.schedule.jms.messagehandler.AuditMessageHandlerMDB.onMessage(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor26.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.interceptor.system.RunAsInterceptor.invoke(RunAsInterceptor.java:31)
    at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
    at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
    at com.evermind.server.ejb.MessageDrivenConsumer.onMessage(MessageDrivenConsumer.java:347)
    at com.evermind.server.ejb.MessageDrivenConsumer.processMessages(MessageDrivenConsumer.java:233)
    at com.evermind.server.ejb.MessageDrivenConsumer.run(MessageDrivenConsumer.java:169)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
    at java.lang.Thread.run(Thread.java:595)

    Seems like Article ID: 864906.1
    Cause
    The cause of this problem is, the entries in aud_jms table which were not processed
    after run "Issue Audit Messages Task" schedule task are not complete audit entries.
    Solution
    1. Run the following query.
    select IDENTIFIER from aud_jms where aud_class='UserProfileAuditor'
    IDENTIFIER is the usr_key.
    Save the output of above query into text file. lets say a.txt, the a.txt will looks like........
    a.txt
    122896 122896 122997 122999 122999
    122986
    122997
    2. Delete the all entries (rows ) from aud_jms table
    3. Run the GenerateSnapshot.sh/GenerateSnapshot.bat using following parameter.
    GenerateSnapshot.bat -inputFile E:\OIM9101\XLServer\xellerate\bin\a.txt -missingSnapshots -username xelsysadm -password xelsysadm -numOfThreads 2
    Where E:\OIM9101\XLServer\xellerate\bin\a.txt is the location of text file which is created in Step1.
    4. Run the "Issue Audit Messages Task" schedule task

  • Error while processing /libs/commerce/content/import.html

    hello every body;
    I wanna import a catalog from hybris to cq5, I fill the form when I click import catalog; it gives me this error:
    Error while processing /libs/commerce/content/import.html
    thanks for your help;

    thanks sham;
    ok; it's resoleved now, it was a problem in the version of cq,i was using cq5.4,it dosn't work with this version;
    but I have an other problem here where I imported a catalog from hybris; the function getProductPrice(product) doesn't work;in the file /apps/geometrixx-outdoors/components/nav_products/listitem_product.jsp
    i the line: final String price = session.getPriceInfo(product); anit gives me the error:
    Caused by: java.lang.NullPointerException
              at com.adobe.cq.commerce.hybris.impl.HybrisSessionImpl.getProductPriceInfo(HybrisSessionImpl .java:184)
              at com.adobe.cq.commerce.hybris.impl.HybrisSessionImpl.getProductPrice(HybrisSessionImpl.jav a:211)
              at com.adobe.cq.commerce.hybris.impl.HybrisSessionImpl.getProductPrice(HybrisSessionImpl.jav a:207)
    thanks for your help;

  • Exception caught by adapter framework: error while processing message to ..

    URGENT:
    <b>Legacy >XI>R3 interface</b>
    <b>SAP XI (file_adapter --> RFC_adapter)</b>
    Friends.
               I need your help for next problem above:
    Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
    Thanks very much for your helps
    Nota: This error is XIPRO environment.
    Message was edited by:
            Cristian Alejandro Toro Salazar
    Message was edited by:
            Cristian Alejandro Toro Salazar

    Hi Cristian,
    >>>>functiontemplate from repository was
    this SAP note 730870 - describes your issue
    let me know if it helped
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Issues while processing the BOMs using fm ''CSAP_MAT_BOM_MAINTAIN'

    Hi Group,
    we are facing issues while processing the BOMs using the basic type(Z-idoc type) for standard type BOMMAT04.
    thing is that the segment 'E1STPOM' is defined to contain 1 to 99999 records in it.
    when an Idoc is run(say with 150/200 segments of 'E1STPOM'), there was a standard error with error message id PIC01(number : 004) when the Idoc is processed with the Standard function module 'CSAP_MAT_BOM_MAINTAIN'.
    the error says 'Error reading material FING_005 . Exception: 0' and Check whether the material number is blocked. but when checked, the Material seems not blocked.
    kindly advise how to overcome this error and proceed further.
    Regards,
    Vishnu

    Checj the material status, while its transfer from one server to another server the status should be different

Maybe you are looking for