Error while pulling sales history into planning area

Hi Folks,
We got error while pulling the sales history data into planning area from infocube.
We uploaded CVC into MPOS.
Please find the below error.
""Combinationens of infocube are not contained in BasisPlobStru""
Message no:/SAPAPO/MSDP_REL106
Thanks
Sri

Hi,
The issue is that The Characteristic Combination is present in MPOS as well as in the list cube.While Uploading sales from the list cube result is that for some months Sales is matching exactly where as for some months data is not showing in the planning area though sales is present in list cube for the same month.I have run Consistency checks for Time series also.
Thanks
sri

Similar Messages

Error while taking back up of Planning Area to Back Up Cube

Hi,
I am taking the back up of Planning Area to Back Up Cube. I am getting the following error message "Error 7 occurred when transferring an IDoc to the Business Information Warehouse". I tried to load data couple of times but I got the same error message on both occasions.
We are working on SAP SCM 4, SP13.
Kindly let me know if anybody knows how to resolve this issue.
Thanks and Regards
Ash
Message was edited by: Ash T
Message was edited by: Ash T

Lilly,
I have verified and found that the source system is active.
Thanks and Regards
Ash

Process Chain error while loading CVC's into planning book

Hi I am trying to run the process chain and till half chain it was good and at one place after VMI Generate CVC's there is a box showing in RED and it is Load Infocube and when i checked it in batch processing it says end with errors and I could'nt find exactly what to do to run the entire process chain. Please anybody can tell me how can i resolve this issue.
Thanks
Hari

Hi Senthil,
For Some of the SKUs it is giving the Error , some abrupt values are stored in Live Cache for these SKUs(CVC), thats why it giving the Error.
The only solution is ..i have to delete the CVCs and create new one...
But i will loose the data as we cant take the Backup of Old CVC data --> Giving COM Error
The reason of Abrupt Values in Live Cache Could Be -->.>
Macro/Alerts
How can we fix these types of Error , as regularly i am getting these Error??
Is there any Note/Patch to overcome this issue?
Will be GR8 if i will get the solution..
Regards,
Rajesh Patil

Error in generating data source from planning area

Hi experts! I have an error while making data source from planning area:
after the screen when i fill in the data source name (Window name: Generate export data source) i have the SYNTAX_ERROR Message:
Syntax error in program /sapapo/cl_im_extract_ex======cp
the main reason: the type /BI0/9A0IVWKNDGD is unknown
what you can suggest to solve this problem?
Thanks.

Dear Andrey Kudriavzev,
The reason is the program is trying to use the datatype '/BI0/9A0IVWKNDGD' which does not exist in the system.
Go SE11 to cross check if it exists. Check dataelement radiobutton -> enter /BI0/9A0IVWKNDGD -> Choose display option. You would need to create this datatype in the system. I feel there must some OSS Note related to this.
Search for an OSS Note. Raise one if you cannot find the relevant notes.
Regards,
Naveen.

Error While Creating Sales Document - on a new rollout

Dear Friends,
        While going for new Plant Creation on a Rollout, i am getting the following error while creating Sales Order,
Kindly suggest the needy to me,
" _Template and one-time material processing is not activated
No determination routine is specified for the SD documents for the
permitted combinations
The combination of sales organization, document category, and
document type or delivery type for the SD document is not permitted_ "
Thanks & Regards
T.Arulvanan

Dear Freind,
Have you assigned the Sales Area to the Document types
T-code : OVAZ.
Also Check the Sales Applications V/c2
Can you double click on the error and See what is the datails of the error appearing?
Regards,
Amlan Sarkar

Error while trying to log into dealer portal - Organisational data not main

Error while trying to log into dealer portal - Organisational data not maintained. This is happening for a specific user.
This information is used in the URL for the VMS dealer portal.
<Protocol>://< Host Name>:<Port>/sap/bc/bsp/sapdii/dwb/c_vms_main.do?sap-client=<Client number>
Does anyone have any experience of similar problem ?

so why are you posting this to Oracle database forum?
I see nothing involving the database.

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

Commit error while transferring Sales order Document to GTS

Hello,
We faced a transfer error while transferring sales order document to GTS.
When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
For sales document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
      DESTINATION cs_transfer-rfc_dest
For billing document transfer :
    CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
      IN BACKGROUND TASK
      DESTINATION cs_transfer-rfc_dest
      AS SEPARATE UNIT
So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
Thanks in advance
Serhat
Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AM

Dear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Getting runtime error while doing sales order

Hi,
I am getting a runtime error while doing sales order.
Error : SAPSQL_INVALID_FIELDNAME
Kindly suggets....stuck up badly.
cant do any transaction.
Regards
Kishan

Hello,
Check OSS Note#209847 and 310304
Regards,
Gauravjit.
Reward points if the notes are helpful

Copying sales history into new info structure

Hi Gurus,
We are running SAP since last two years and company is running since last 30 year but we have never used SAP S&OP. Now we want to use one. So far we have created info structure with required characteristics and key figures.
Can you please suggest me the process of copying sales history into info structure?
I will be really grateful to you if suggest me ASAP.
Thank in advance.
Kind Regards
Raja Ram

What the heck is S&OP?
If you're talking about [LIS|http://help.sap.com/saphelp_470/helpdata/en/c1/37544e449a11d188fe0000e8322f96/frameset.htm], then there is some standard functonality to populate the newly created info structures with the data from existing documents.
Path in SPRO (may differ slightly, depending on the R/3 release):
     Logistics General
     Logistics Information System (LIS)
     Logistics Data Warehouse
     Data Basis
     Tools
     Setup of Statistical Data
     Application-Specific Setup of...
     Perform Setup u2013 Sales and Distribution
But if you need to bring in sales history from a legacy system, you'll need to write an ABAP report for that.

Error message:render error while running sales and reports

r message:render error while running sales and reports.
how do you fix it?

Hello,
Thanks for your post.
I can't find any useful information based on the error message. Could you please elaborate your scenario with more detail? In addition, please help to collect detail log information regarding this issue.
If this issue occured while view a SSRS report, please take a look at the following artice:
How to diagnose issues when running reports in the report server?
http://blogs.msdn.com/b/lukaszp/archive/2007/01/31/how-to-diagnose-issues-when-running-reports-in-the-report-server.aspx
Regards,
Elvis Long
TechNet Community Support

Error while doing Sales contract

Hello ,
I am facing an error while doing sales contract . The error is as follows:
Message no. FI311: No commitment item entered in item 00010
Kindly provide the solution to solve this issue
Thanks

Note 1267998 - FI311 - Common issues related to this error message
Note 418471 - V1331 (Item & does not exist) / Funds Management
Regards,
Ravi

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

Getting 500 Internal Server Error while tryig to log into freshly upgraded

Hi
Getting 500 Internal Server Error while tryig to log into freshly R12 upgraded.
Below is the application.log messages.
=================================================================================================
12/12/31 10:02:22.295 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:41)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:71)
at java.nio.channels.Channels.access$000(Channels.java:58)
at java.nio.channels.Channels$1.write(Channels.java:145)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:735)
13/01/01 23:22:07.988 html: Servlet error
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.RuntimeException: oracle.apps.fnd.common.AppsException: java.sql.SQLException: The Network Adapter could not establish the connection;
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:886)
at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:1017)
at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:901)
at oracle.apps.fnd.framework.webui.OAServerDelegate.releaseWebAppsContext(OAServerDelegate.java:1823)
at oracle.apps.fnd.framework.webui.OAJSPHelper.handleErrorStackDisplay(OAJSPHelper.java:1455)
at OAErrorPage.jspService(_OAErrorPage.java:257)
13/01/01 23:41:46.338 html: Error initializing servlet
java.lang.NoClassDefFoundError: oracle.apps.fnd.sso.Utils (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:735)
Caused by: java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:222)
at oracle.apps.fnd.sso.Utils.<clinit>(Utils.java:674)
at java.lang.J9VMInternals.initializeImpl(Native Method)
=================================================================================================
Current workaround is bouncing the oacore services.
Already raised the SR with Oracle.
Oracle support analyst suggesting to upgrade the JDK version from SR2 to SR11 or higher to fix this issue.
Please let us know any other tips to fix this issue.
Regards,
Jagadeesha

Hi,
I have gone through the docs. , not use full. Please find the inline comments for the same.
E-Business Suite Users Experience Intermittent HTTP-500 Errors and Database Connection Errors [ID 1314433.1] -- No solution
R12: Http Server Crashing Frequently With Segmentation Fault (NAS or SAN filesystem) [ID 732857.1] -- Already it is under local file system only.
How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1] -- No solution
Autoconfig is completed wihtout any errors.
I have not chedked the database log file. I will check and update you soon.
Cheers,
Jagadeesha

Error while pulling sales history into planning area

Similar Messages

Maybe you are looking for