Error while pushing idocs from SAP to XI

Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
<b>Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible</b>
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jain

hi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain

Similar Messages

"An IdocException occurred" while posting Idocs from SAP ECC to SAP PI AEX

Hi all,
While sending Idocs from SAP ECC to SAP PI 7.4 AEX, we are experiencing this issue at SAP ECC-SM58
Only a particular Idoc type is having this issue.
Below are the checks done before posting this query:
1. Pushed other Idocs from the SAP ECC to PI and all were getting exchanged successfully.
2. Reloaded the meta data in PI for the particular Idoc type in issue.
3. Checked the RFC destinations in SAP ECC, RFC connection test is also working fine.
4. Unicode option enabled in the SAP ECC RFC destination pointing to PI-AEX
5. Restarted the inboundRA service in PI AEX.
Is there anything still missing. What could be root cause of this issue.
If anyone has encountered it before, pleases share the resolution.
Thank you
Younus

Hi Amit,
Thanks for the reply. Log viewer doesn't provide much help on the error.
The error desc says
"JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT_SID, Managed_Application_Thread_58, connectionId=5-ip address|sapgw20|XI_IDOC_DEFAULT_SID, Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: An IDocException occurred"
regards,
Younus

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Problem when pushing IDOC from SAP to XI

Hi,
I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.

Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy

Warnings while receiving IDOC from SAP

Hi All,
I am running BTS 2010. I configured recieve location to recieve ORDERS05 Idocs. But I am receiving below mentioned warning.
1) In SAP the Idoc shows as successfully sent
2) On the BizTalk side we cannot find the Idoc anywhere
3) In the EventLog of our BTS we get the following errors (the errors are raised exactly at the same time when the Idoc which “disappears” is sent from SAP to BizTalk )
Error 1:
Event Type: Warning
Event Source: BizTalk Server 2010
Event Category: (1)
Event ID: 5740
Date: 1/10/2014
Time: 12:38:59
User: N/A
The adapter "WCF-Custom" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.XmlReaderGenerationException: The segment or group definition E1234 was not found in the IDoc metadata. The UniqueId
of the IDoc type is: IDOCTYP/3/ORDERS05//700. For Receive operations, the SAP adapter does not support unreleased segments.
   at Microsoft.Adapters.SAP.TypedIdocBodyWriter.OnWriteBodyContents(XmlDictionaryWriter writer)
   at System.ServiceModel.Channels.BodyWriter.WriteBodyContents(XmlDictionaryWriter writer)
   at System.ServiceModel.Channels.BodyWriterMessage.OnWriteBodyContents(XmlDictionaryWriter writer)
   at System.ServiceModel.Channels.Message.WriteBodyContents(XmlDictionaryWriter writer)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkMessageStream(Message wcfMessage, IAdapterConfigInboundMessageMarshalling config)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkMessage(IBaseMessageFactory messageFactory, IAdapterConfigInboundMessageMarshalling marshallingConfig, Message wcfMessage)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateBizTalkSubmitMessage(IBaseMessageFactory factory, String inboundTransportLocation, String inboundTransportType, RLConfig config, Message wcfMessage,
String ssoToken)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkSubmitBase..ctor(Message message, BizTalkEndpointContext endpointContext, ControlledTermination control, AsyncCallback realCallback, String ssoToken)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkSubmit..ctor(Message message, AsyncCallback callback, Object state, BizTalkEndpointContext endpointContext, String ssoToken, ControlledTermination control)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkOperation.Create(Message message, AsyncCallback callback, Object state, String ssoToken, Boolean bizTalkOneWay, BizTalkEndpointContext endpointContext, ControlledTermination
control)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance.BeginOperation(Message message, AsyncCallback callback, Object state, Boolean bizTalkOneWay)".
Error 2:
Event Type: Warning
Event Source: BizTalk Server 2010
Event Category: (1)
Event ID: 5740
Date: 1/10/2014
Time: 12:38:59
User: N/A
The adapter "WCF-Custom" raised an error message. Details "Microsoft.Adapters.SAP.RFCException: Details: ErrorCode=RFC_INVALID_HANDLE. AdapterErrorMessage=An exception has occurred on the listener while executing
RfcWaitForRequest..
   at Microsoft.ServiceModel.Channels.Common.Design.AdapterAsyncResult.End()
   at Microsoft.ServiceModel.Channels.Common.Channels.AdapterReplyChannel.EndTryReceiveRequest(IAsyncResult result, RequestContext& requestContext)
   at Microsoft.Adapters.Internal.LayeredChannelBindingElement.LayeredInboundChannel`1.System.ServiceModel.Channels.IReplyChannel.EndTryReceiveRequest(IAsyncResult result, RequestContext& context)
   at System.ServiceModel.Dispatcher.ReplyChannelBinder.EndTryReceive(IAsyncResult result, RequestContext& requestContext)
   at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.EndTryReceive(IAsyncResult result, RequestContext& requestContext)".
Error 3:
Event Type: Warning
Event Source: BizTalk Server 2010
Event Category: (1)
Event ID: 5740
Date: 1/10/2014
Time: 12:38:59
User: N/A
The adapter "WCF-Custom" raised an error message. Details "The WCF service host at address sap://CLIENT=100;LANG=;@a/SAPD.corp.int/10?ListenerDest=BIZTALKD&ListenerGwServ=sapgw10&ListenerGwHost=SAPD.corp.int&ListenerProgramId=BIZTALKD&RfcSdkTrace=False&AbapDebug=False
has faulted and as a result no more messages can be received on the corresponding receive location. To fix the issue, BizTalk Server will automatically attempt to restart the service host.".
Error 4:
Event Type: Warning
Event Source: BizTalk Server 2010
Event Category: (1)
Event ID: 5740
Date: 1/10/2014
Time: 12:38:59
User: N/A
The adapter "WCF-Custom" raised an error message. Details "System.ServiceModel.CommunicationObjectFaultedException: The communication object, Microsoft.Adapters.Internal.LayeredChannelBindingElement.LayeredInboundChannel`1[System.ServiceModel.Channels.IReplyChannel],
cannot be used for communication because it is in the Faulted state.
   at System.ServiceModel.Channels.CommunicationObject.Close(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Close()
at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.Close()".
http://social.msdn.microsoft.com/Forums/en-US/57a18e78-d902-4a39-a99f-95ef732792f7/adapter-pack-20-sap-adapter-problem
As per the replies in the above link i made the changes but still warning continues.
Please suggest
Thanks,

The IDOC has not arrived in BizTalk, that's why you do not see it. The problem is that the IDOC fails at adapter level, when the SAP RFC Library is called.
The actual problem is that the IDOC you are receiving is containing unreleased segments and that's not supported, you should contact your SAP administrator to get this problem resolved.
If I'm not mistaken it's transaction WE30 in SAP, there you have to select the IDOC type (ORDERS05 in your case) and then you can set the release. But your SAP administrator will probably know better how to do this
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

Error while sending mail from SAP to external mail id

Hello Experts,
I am blocked by the below problem.
I am trying to send email from SAP to an external email ID. I have tried using Class approach as well as the function 'SO_DOCUMENT_SEND_API1' for the same.
Everytime i get the following message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address> Sender address rejected.
I am not at all able to figure out why this type of error is coming.
The same code is working on the development environment but not on the test system.
Please reply back asap as i am completely blocked due to this.
Thanks/Regards,
Himanshu

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error while sending mails from SAP

Hello Experts,
I am facing the below problem:
If an error occurs during the processing of a Z SAP transaction, an email needs to be sent to the user who is executing the transaction.
So, in this case the sender and receiver is the same user.
But the problem that i am facing is that for sending the mail from SAP, i have to maintain the email address in the user profile as blank. If I maintain some email address in the user profile, i encounter the following error:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address>: Sender address rejected .
Please help me resolve this.
Thanks a lot in advance to answer the above query.
Regards,
Himanshu

Hi Himanshu,
I think its the problem with mail server configured in ur system.
Please contact ur basis Person.Ask him to chk The SCOT tcode once.Maybe ur SMTP configuration is not done properly.Also chk this sap note 455140 - Configuration for e-mail, fax using SMTP
Regards,
Lakshman.

Error while creating IDOC from payment run

Dear All,
I 've alredy done all EDI settings for creating IDOC from payment run. But system in not generating IDOC as end with a result as "House bank is not designated as a EDI Partner'.
Please suggest how to define house bank as a EDI partner.
Regards,
Subhash

From We20 u have to create the partner profile for the bank u r using in ur transaction. In we20 select the partner type B (Bank) and as Partner no give ur bank numbrer.
Regards,
Joy.

Error while Reading Idocs from ECC 6.0 to Sun IDM .

Hi Gurus,
We have a scenerio where we have to update the Sun IDM Server with all the changes in HR Data happening in ECC.
For that... we have
1. Created a Logical System for Sun IDM server, Port, RFC Connection (TCP/IP).
2. Assigned Partner Profiles, Distribution Model etc. for msg. type HRMD_A ;
3. We have created a Communications User used by the IDM server to connect to ECC.
Idocs are created daily and are in status 03 - Data passed to Port OK !
and on the In Sun Identity manager 8.0 we have created SAP resource adapter for ECC 6.0,
after giving resource parameters our test connection is successful.
We also changed edit synchronisation policy for the same but when we start synchronisation in IDM, it is unable to read any idocs although Idocs are generated in SAP .
Log file gives the message as "Incoming IDoc list request containing 0 documents"
We also have one more error ;
some times while doing a connection test : JCO.Server could not find server function 'åäåä¹'
while most of the times the connection is successful.
Please suggest .

Hi Gurus,
The error got resolved .
The changes in the settings i did :
SAP SIDE : Made the RFC Connection Unicode.
IDM SIDE : Checked on the "SAP Server Unicode" checkbox; while doing the HR Activ Synch Settings.
This Resolved the error.
regards
Vaibhav

Error while sending mail from SAP system

Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error: EDI: Error while assigning IDoc number

Hi Everybody,
using XI 3.0 on Linux 64 bit SLES9 with Oracle I got some probleme sending messages from mq series to sap:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>EDI: Error while assigning IDoc number</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: EDI: Error while assigning IDoc number</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What is missing here?
Kind regards,
Michael

Hi Jayakrishnan,
thanks a lot for your answer.
SM59 is working finde. In IDX1 I got the the correct RFC destination entered and a double click works fine also.
The other way around R3 -> XI -> mq series is working fine. Here we are trying mq -> XI -> R3 and it stops sending from XI to R/3.
How to check the IDOC type?
Regards,
Michael

Security warning while printing PO from SAP Portal.

Dear Experts,
We are facing below error while printing PO from SAP Portal. After accepting the condition and clicking on RUN the pop-up comes again and again.
Please could you advise the resolution of this. Does any browser setting needs to be changed ?
Please suggest.
Regards,
Arpit C

Hi Arpit,
Please try below steps...
1. Go into the Control Panel
2. Double click on Java to open the Java Control Panel
3. Go to the Advanced Tab
4. Expand Mixed code
5. Select the option for “Enable – hide warning and run with protections”
For detailed information, please refer to the article:
Error : Java has discovered application components that could indicate a security concern
http://wiki.scn.sap.com/wiki/display/BOBJ/Web+Intelligence+and+Oracle+Java+Runtime+Environment+Known+Issues+in+SAP+BI+4.1
Regards,
Prithviraj.

Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.

Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
    NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
    NSMutableDictionary *properties = [NSMutableDictionary dictionary];
    [properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
    [properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
    [self.session createDocumentFromInputStream:inputStream
                                       mimeType:@"image/png"
                                     properties:properties
                                       inFolder:salesOrderRouteMapFolderId
                                  bytesExpected:[imageData length]
                                completionBlock:^(NSString *objectId, NSError *error) {
                                    NSLog(@"Object id is %@",objectId);
                                    if(error == nil) {
                                        [inputStream close];
                                        NSLog(@"Uploading Sales order route map successfully.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
                                    } else {
                                        [inputStream close];
                                        NSLog(@"Uploading sales order route map failed.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
                                } progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
                                    NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
             httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
                    properties:(CMISProperties *)properties
            contentInputStream:(NSInputStream *)contentInputStream
               contentMimeType:(NSString *)contentMimeType
                 bytesExpected:(unsigned long long)bytesExpected
                   cmisRequest:(CMISRequest*)request
               completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
                 progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
    // Validate param
    if (link == nil) {
        CMISLogError(@"Must provide link to send atom entry");
        if (completionBlock) {
            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
        return;
    // generate start and end XML
    CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
    writer.cmisProperties = properties;
    writer.mimeType = contentMimeType;
    NSString *xmlStart = [writer xmlStartElement];
    NSString *xmlContentStart = [writer xmlContentStartElement];
    NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
    NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
    NSString *xmlContentEnd = [writer xmlContentEndElement];
    NSString *xmlProperties = [writer xmlPropertiesElements];
    NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
    NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
    // The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
    // the fly to support very large files.
    [self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
                                     httpMethod:httpRequestMethod
                                        session:self.bindingSession
                                    inputStream:contentInputStream
                                        headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
                                  bytesExpected:bytesExpected
                                    cmisRequest:request
                                      startData:startData
                                        endData:endData
                              useBase64Encoding:YES
                                completionBlock:^(CMISHttpResponse *response, NSError *error) {
                                    if (error) {
                                        CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
                                        if (completionBlock) {
                                            completionBlock(nil, error);
                                    } else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
                                        if (completionBlock) {
                                            NSError *parseError = nil;
                                            CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
                                            [atomEntryParser parseAndReturnError:&parseError];
                                            if (parseError == nil) {
                                                completionBlock(atomEntryParser.objectData, nil);
                                            } else {
                                                CMISLogError(@"Error while parsing response: %@", [parseError description]);
                                                completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
                                    } else {
                                        CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
                                        CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
                                        if (completionBlock) {
                                            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
                                                                                 detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
                                  progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.

Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

Error for connectivity to transfer IDOC from SAP R/3 to PI.

Dear All,
While transferring IDOC from R/3 to PI, Outbound IDOC is sucessfully transferred in R/3 but when i check in PI IDOC is not recieved . Checking the Status in TCODE: SM58 we get the following error:
No_Run_Permission
All the RFC and Port Connections are fine and in place.
Kindly guide through...

Just check the RFC user has correct authorization to post IDOC to PI. Your Basis person can help you in this.
-Gouri

Error while pushing idocs from SAP to XI

Similar Messages

Maybe you are looking for