Error while raising billing from sto

Hi . ,
For my business cycle , Here we are doing STO then delivery then billing .... now customer want during billing they can maintain values manually ... previously it is flowing from sto only ( condition type P101 ) , now as per their requirement I remove that one ...and in that place i put one manual condition type which will work through per kg (weight basis) .
But now whenever i am creating invoice in header i am giving value per kg . ... but it' sshowing some error of " material , condition type and unit of measure EA is not allowed "
Though net weight and gross weight is maintained properly .
Please advice .

Hi ..sankar ,
Unit of measure in material master is EA .
But I maintain manual condition type in net weight basis .
In v/06 , I customize it like bellow way ...
Cond. class     B Prices
Calculat.type    E Net weight
Cond.category G Cost
Rounding rule    Commercial
pls help ...

Similar Messages

Getting "Risk Analysis Failed " error while raising request from IDM

Hi friends,
Some of the User to Role mapping requests from IDM did not reach CUP (request ID = null) . When noticed the VDS log , we found the error from GRC webservice to be Risk Analysis Failed . We thought it might be an RAR issue , however , the request just got through CUP when submitted from GRC webservice directly . From RAR perspective also, everything looks ok .
Please provide your thoughts as to whether this error is pertaining to some other issue or suggest me what I can check in Identity center to correct this .
Thanks in advance for your help .

The connector set up are all looking correct . However the requests are not getting raised in many cases .
At one point we identified that , since our SAP systems have been migrated to DB2, some of the systems were down .
So when the system is down we decided , Risk analysis is failing . however , now the systems are up and running and still the risk analysis is failing .

Error while sending mail from SAP

Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
    Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
    A RAISE statement in the program "SA
    condition "FOLDER_NOT_EXIST".
    Since the exception was not intercep
    program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
Hasan

Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

Error while raising a invoice using VF01

Hi,
I am getting an error while raising a invoice using VF01.
Error as follows
RV_MESSAGE_UPDATE
Update was terminated
System ID....   TIP
Client.......   300
User.....   user1
Transaction..   VF01
Update key...   E66E6454075548D8922BAC091E81F0CB
Generated....   18.07.2007, 18:57:38
Completed....   18.07.2007, 18:57:38
Error info...   TD 443: WRITE_FORM
Pls help
Points will be rewarded.
Thanks

Hi,
This is an ABAP short dump. If you go through the error log, there will be a section where in you can see > What caused the problem.
Try to analyze this log and you can find a solution. Probably, you can also check whether there is any OSS note with this error message.
Thanks
Murali.

Error while creating subsite from site template

Hi,
I am getting below error while creating subsite from existing site template .
Sachin Bhosale

There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers,

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Error while raising leave request

Dear all,
I am getting error while raising Leave request over ESS...Task WS12300111 locked for instantiation.
As well as in MSS manager is not getting requests for approval..can anyone tell me on workflow front what shall be done.
Regards,
Rajasekar.

check the WF is a general task ie PFTC and user has authoriation, Are you using any custom code through badi, then enusre Start_WF method is implemented.

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Failed to commit objects to server. Error while publishing reports from BW

Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.

Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-)

Error while creating DTP from DS to Infoobject

Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
Satya

Hi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose.

Password Violation error while creating users from Admin interface

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Guys,
The Sun Identity Manager system throws policy violation error while creating users from Sun Identity Manager Admin interface.
Current System:
1. I have configured TAM Pass-Thru authentication for End User Login Application.
2. I have an admin user 'testsjimadmin1' who has admin capabilities. testsjimadmin1 user has default SJIM password policy.
3. I have custom password policies configured for different orgainizatoions
Problem:
1. The Sun Identity Manager throws a password policy violation error when 'testsjimadmin1' tries to create an user with valid or invalid password from Sun Identity Manager Admin interface.
2. If TAM Pass-thru authentication is removed for 'End User Login Application' and Sun Identity Manager default authentication is configured for 'End User Login Application' then testsjimadmin1 was able to create user successfully without any errors.
Please let me know if any configurations are required to be made on Sun Identity Manager for TAM Pass-Thru authentication so that admin users can create users successfully from admin interface.
Appreciate your help!!!
Thanks
Vijay

Error while sending data from XI to BI System

Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
Narendra

Hi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal

Error while doing billing

Hi every one'
i got an error while doing billing
Error :sub transactions in schema Z step 0001 inconsistent,
this error is comming while using transaction eamabi,
the schema is worked properly since i updated a line item for additional TAX,
and we created new sub transactins for additional vat,AND for the sub transactions i have added a new GL account,
and i have added those Sub transactions in the respective field of the rate,
I have maintained properly all the fica setting for the sub trasactions...like ek01 and ek02 and table te305 & tfktvo as well. Dont understand where the setting have been missed..Please let me kow if you come acrosee this kind of situation.
later i have deleted all the line items in tha same schema,and i have given only quanti01 variant
and does not have any vat related line item maintained at schema even though the same error proposed.
regards
BekMs

I think you need to ask FICA person to fix the subs, This is not billing or rate error. There must be some config missing in sub's and main. If you give another try with any other subs it should work. This will help you to double check too.
GG

Error while raising billing from sto

Similar Messages

Maybe you are looking for