Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12

Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.

Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind

Similar Messages

Error while reading data for reporting

Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
Sandy

Hi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy

Error in reading data of Virtual Infoprovider 0TCT_VC01

Hi Experts,
I have created a query on Statistics Multiprovider 0TCT_MC01. However, when I am trying to run the query, it gives following error message and does not display data but gives dump:
- Messages for Datasource 0TCT_DS01 from source system
- Syntex error: System error in program CL_RSTCT_BIRS_OLAP_AGGR_EX
- Error Reading the data of Infoprovider 0TCT_VC01
Kindly suggest what could be the issue and the solution for the same.
Thanks & Regards,
Himanshu

hi,
You can try running the query in RSRT also check the below thread
"Is This The Party To Whom I Am Speaking?
Thanks,

Error while reading data through External Table!!!

CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
AP

Let's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin

2: error while reading configuration for secure communication

Hello,
Getting the error while opening sxmb_ifr
2: error while reading configuration for secure communication
Please suggest

Check the business system defined for your XI/PI in SLD --> Integration tab and check the URL
The URL should be http://<PI host>: <ABAPport>/sap/xi/engine?type=entry
Hope this helps
Edited by: William Lee on Nov 26, 2009 12:32 AM

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error 65575: overrun error while reading data from NI 9871

Hello everyone,
I am new here. I configured NI 9871 in RS-485 mode to acquire data from a sensor at the data rate of 8 samples per second. While reading data from sensor, sometimes I got the error 65575: "An overrun error has occurred in the data being read. Ensure that the module Flow Control is configured correctly." I didn't understand the error, how can I fix it, what dose the flow control means.
I will be very thankful if anybody help me to fix this error.
Thanks
Wasif

Hello Wasif,
The error you are getting presents itself when the hardware buffer is full and new data is coming in. Data buffer is 64 bytes. One thing to try is to clear the RX FIFO after every read. Please refer to the following link that talks about the method.
http://zone.ni.com/reference/en-XX/help/370984R-01/lvaddon11/crio-9871/
Hope this help you solve the issue.
Regards
Luis S
Application Engineer
National Instruments

Hyperion IR : Getting out of memory error while fetching data for whole year through web client (wrokspace)

Hi,
While fetching data though IR wen client from workspace for a year(all 12 months) I am getting error as ("Out of Memory .Advice : Close other applications or windows and try again").
If I am trying same through IR studio it does not give any output and show me same repoting front page.
If i am selecting periods till 8 months it is giving the required data in both IR web client and IR studio.
Could you please suggest how can we resolve this issue.
Thanks,
D.N.Rana

Issue Cause :
Sometimes this is due to excessive data which brings the size of the BQY file up around one gigabyte uncompressed in size (for processing may take twice as actual RAM, plus the memory space space for the plugin, and the typical memory limit on a 32-bit system is 2 gigabytes).
Solution :
To avoid excessive BQY size exceeding memory availability:
Ensure that your computer has at least 2Gb of free RAM before he runs IR Studio.
Put a limit to the number of rows that can be pulled down: Right click on Request label of Query section and put a value in Return First xxx Rows (and check the check box).
Do not pull down more than 750 MB of data (remember it may be duplicated while processing).
Place limits or aggregations in Query section (as opposed to Result section) to limit data entering the BQY.

Port overrun error while reading data in queue

I am trying to read data from various wireless sensors(5-6 in number) which are communicating with my PC using rs232 port.
the size of data from each sensor that i am getting is 39 bytes.
I want to extract some bytes of these data for which i am using a string subset function.
Now the issue is due to the high baud rate i am not able to read data from each of them individually because before one set of data is worked on another set arrives and port overrun error occurs.
I am trying to do this using queue but could not find a possible solution.

This shouldn't be a difficult problem, as serial communication is "slow" (compared to the speed of the CPU). You want to take advantage of LabVIEW's parallel nature and have each of your Serial devices running in parallel, taking 39 bytes of data and passing it to an "Extract useful information" subVI. Note that you can use the same subVI for each of the 6 lines, and the time it takes to "extract the useful information" (by doing some string parsing) should take no more than a few microseconds, so it can easily be "shared" by all of your serial devices. Alternatively, you could make this VI reentrant, so a separate and independent copy would be assigned to each device, again allowing parallel operation.
If you are still having problems, post some code.

Error while loading data for Master dara

Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to 0material_attr through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records for 100 records
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
Raja

Hi
While loading master data im getting below error
"Record filtered in advance as error records with the same key exist".
When I clicked, above error Long Text, I am getting below error
Diagnosis
     The existing DTP requires a serialized update because fields are updated
     non-commutatively during the processing run (for example, MOVE).
     Therefore all new data records that have the same semantic key as
     incorrect records that have not yet been corrected in earlier requests
     or earlier data packages of the same request, are filtered out after the
     extraction in a special step. In this way the system ensures that
     incorrect data records are not repeated for your changes, which may not
     contain errors themselves.
System Response
     The data record is not updated but is written to an error stack.
Procedure
   Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration

Error While Sending Data for Currency Translation

Hello Experts,
I am trying to send data via template. Data is getting saved but I am getting following error displayed.
1.) When I try to enter data for a particular month then, error as FX-200.
2.) When I try to enter data accross months of more than year then , FX-045 and FX-310 error.
I had look on various SAP Notes available for the errors.
As per them, I ran Full optimization, I checked rates are maintained for previous year too, I checked for LC Currency Type Property is maintained as L.
But nothing Worked.
Currently only the 3 members are maintained in Rate Dimension, so exceeding the size limit cannot be an issue.
Kindly Suggest, what could be another possible reason for the errors.
Regards,
Apoorva Garg

Hello,
1.) I am getting issues for example for 2010.Mar, 2010.Dec, 2013.Dec, 2012.Dec
2.) Business Rules Maintained
3.) Business Rule called via Default Script Logic
// Default base level logic - applies to all base members in all dimensions
*INCLUDE system_constants.lgl
//Process_Each_Member = TIME
*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','KPI_Working_Act_FX','','GLOBAL','%SCOPETABLE%','%LOGTABLE%')
*COMMIT
//*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','KPI_Working_AOP_FX','','GLOBAL','%SCOPETABLE%','%LOGTABLE%')
//*COMMIT
Regards,
Apoorva

Error while reading data from MapMessage using MDB

Hi,
I have written a small client program to send a message to a queue and an MDB receives the message in the onMessage() method. The message is of type MapMessage. I set key value pairs and send the message in a queue. When I try to read data from MapMessage inside onMessage() method of MDB, I get an exception:-
javax.jms.MessageNotReadableException: In write mode
When I send the message, by default the readonlymode is false. How do I set the mode to readonly exclusively in case of MapMessage ?
Sirisha

Hi,
I do not have any problem with TextMessages...I works fine..It is only with MapMessage that I am not able to read the values..Before sending the message, the message has the flag "readMode" set to false by default by the server...R there any configurations to be made to any files like web.xml or server.xml or jms.xml ?
I am running my JMS application on JDeveloper IDE that has an in-built OC4J server which supports JMS.

Error while reading data from backend system.

Hi all,
       When i click on personnel information iview i am getting following error
EIC Authentication
An error occurred while data was read from your ERP system. Contact your system administrator.
I used SQL TRACE and RFC TRACE to find where it got stopped below see the trace result.
            14     PA0105     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "USRTY" = '0001' AND "USRID" = 'ESS_USER1'
           988     PA0105     FETCH         1       1403
            14     PA0001     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           665     PA0001     FETCH         1       1403
            17     PA0000     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           615     PA0000     FETCH         1       1403
            25     PA0001     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           896     PA0001     FETCH         1       1403
            16     PA0002     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           783     PA0002     FETCH         1       1403
        13.178     ?     Server         1          0     EPSAND1 ? Server HREIC_GET_AUTHENTICATION_ESS 643 309
What is the solution to solve this problem ?
Thanks and regards,
Phanikumar

Looks like authorization issue. Could you confirm whether proper authorizations have given to this user?
Also, run the application again get an error and then go to Transaction ST22 and see if there is any system dump for this user.
Regards,
Nitin

Error while reading data

Hi all,
       When i click on personnel information iview i am getting following error
EIC Authentication
An error occurred while data was read from your ERP system. Contact your system administrator.
I used SQL TRACE and RFC TRACE to find where it got stopped below see the trace result.
            14     PA0105     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "USRTY" = '0001' AND "USRID" = 'ESS_USER1'
           988     PA0105     FETCH         1       1403
            14     PA0001     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           665     PA0001     FETCH         1       1403
            17     PA0000     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           615     PA0000     FETCH         1       1403
            25     PA0001     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           896     PA0001     FETCH         1       1403
            16     PA0002     REOPEN               0     SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
           783     PA0002     FETCH         1       1403
        13.178     ?     Server         1          0     EPSAND1 ? Server HREIC_GET_AUTHENTICATION_ESS 643 309
What is the solution to solve this problem ?
Thanks and regards,
Phanikumar

Hi Phanikumar,
could you solve this problem? I have exactly the same issue and I don't find any solution for this. I would appreciate your help!!
Many thanks and regards, Jasmin

Error while loading data for table. (ADM0161)

I've this messages when I perform a Scan
and Repair operation in version 5.1
The table is obj_X_DOCUMENTS
Can you help me?
Thanks

Check following KB (SAP Note) - 1181953 - Errors: "ADM0161," "DA0005," "ORA-12535," "ORA-00911,"ORA-01001" and "ORA-12560" after moving repository and data source databases between database servers.
Either connection to your Document domain is not working or you have corrupted DB and need to restore from backup.
Please note, 5.1 is no longer supported. Only online content is still available.

Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12

Similar Messages

Maybe you are looking for