Error while reading data from cache
Hi,
I am implementing IPofSerializer for an object of C#. I have successfully written C# object.
I have also read the first object.
But when I am going to read the second object's last field which of type boolean it is giving me error:
System.IO.EndOfStreamException was unhandled by user code
Message="Unable to read beyond the end of the stream."
Source="mscorlib"
StackTrace:
at System.IO.__Error.EndOfFile()
at System.IO.BinaryReader.ReadByte()
at Tangosol.IO.DataReader.ReadPackedInt32()
at Tangosol.IO.Pof.PofStreamReader.UserTypeReader.AdvanceTo(Int32 index)
at Tangosol.IO.Pof.PofStreamReader.ReadInt32(Int32 index)
at Tangosol.IO.Pof.PofStreamReader.ReadBoolean(Int32 index)
at HyperRig.CachingService.Adapter.POFSerializers.MapMessageFieldPOFSerializer.Deserialize(IPofReader Reader) in D:\Hyper Rig\HyperRig.CachingService.Adapter\HyperRig.CachingService.Adapter.POFSerializers\MapMessageFieldPOFSerializer.cs:line 21
at Tangosol.IO.Pof.PofStreamReader.ReadAsObject(Int32 typeId)
at Tangosol.IO.Pof.PofStreamReader.ReadCollection[T](Int32 index, ICollection`1 coll)
at HyperRig.CachingService.Adapter.POFSerializers.MapMessagePOFSerializer.Deserialize(IPofReader Reader) in D:\Hyper Rig\HyperRig.CachingService.Adapter\HyperRig.CachingService.Adapter.POFSerializers\MapMessageFieldPOFSerializer.cs:line 55
at Tangosol.IO.Pof.PofStreamReader.ReadAsObject(Int32 typeId)
at Tangosol.IO.Pof.PofStreamReader.ReadObject(Int32 index)
at Tangosol.IO.Pof.ConfigurablePofContext.Deserialize(DataReader reader)
at Tangosol.Net.Impl.RemoteNamedCache.ConverterFromBinary.Convert(Object o)
at Tangosol.Util.ConverterCollections.ConvertArray(Object[] ao, IConverter conv)
at Tangosol.Util.ConverterCollections.ConverterCollection.CopyTo(Array array, Int32 index)
at Tangosol.Util.ConverterCollections.ConverterQueryCache.GetValues(IFilter filter)
at Tangosol.Util.ConverterCollections.ConverterNamedCache.GetValues(IFilter filter)
at Tangosol.Net.Impl.RemoteNamedCache.GetValues(IFilter filter)
at Tangosol.Net.Impl.SafeNamedCache.GetValues(IFilter filter)
at HyperRig.CachingService.Adapter.OracleCoherence.OracleCoherenceCachingLayer.ReadMultipleBySubjectName(String SubjectName, List`1& ReceivedMessageRecords, Object TransactionObject) in D:\Hyper Rig\HyperRig.CachingService.Adapter\HyperRig.CachingService.Adapter.OracleCoherence\OracleCoherenceCachingLayer.cs:line 444
at HyperRig.CachingService.Adapter.OracleCoherence.OracleCoherenceCachingLayer.ReadMultipleBySubjectName(String SubjectName, List`1& ReceivedMessageRecords) in D:\Hyper Rig\HyperRig.CachingService.Adapter\HyperRig.CachingService.Adapter.OracleCoherence\OracleCoherenceCachingLayer.cs:line 461
at HyperRig.DataManager.ETLEngine.DataCacheExtractor.Extract(Object transaction, DataTable& resultingDataTable)
InnerException:
I am using Oracle Coherence 3.5.3
Regards
Nitin Jain
Hi Luk,
Here is the server side config:
<?xml version="1.0"?>
<!--
| Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
|
| Oracle is a registered trademarks of Oracle Corporation and/or its affiliates.
|
| This software is the confidential and proprietary information of
| Oracle Corporation. You shall not disclose such confidential and
| proprietary information and shall use it only in accordance with the
| terms of the license agreement you entered into with Oracle.
|
| This notice may not be removed or altered.
-->
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>ACCOUNT</cache-name>
<scheme-name>dist-default</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>dist-default</scheme-name>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>custom-types-pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
<backing-map-scheme>
<local-scheme/>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<proxy-scheme>
<service-name>ExtendTcpProxyService</service-name>
<thread-count>5</thread-count>
<acceptor-config>
<tcp-acceptor>
<local-address>
<address>localhost</address>
<port>9099</port>
</local-address>
</tcp-acceptor>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>custom-types-pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
</acceptor-config>
<autostart>true</autostart>
</proxy-scheme>
</caching-schemes>
</cache-config>
and client side config is:
<?xml version="1.0"?>
<!--
| Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
|
| Oracle is a registered trademarks of Oracle Corporation and/or its affiliates.
|
| This software is the confidential and proprietary information of
| Oracle Corporation. You shall not disclose such confidential and
| proprietary information and shall use it only in accordance with the
| terms of the license agreement you entered into with Oracle.
|
| This notice may not be removed or altered.
-->
<cache-config xmlns="http://schemas.tangosol.com/cache">
<caching-scheme-mapping>
<cache-mapping>
<cache-name>ACCOUNT</cache-name>
<scheme-name>extend-direct</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<remote-cache-scheme>
<scheme-name>extend-direct</scheme-name>
<service-name>ExtendTcpProxyService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address>localhost</address>
<port>9099</port>
</socket-address>
</remote-addresses>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>30s</request-timeout>
</outgoing-message-handler>
<serializer>
<class-name>Tangosol.IO.Pof.ConfigurablePofContext, Coherence</class-name>
<init-params>
<init-param>
<param-type>string</param-type>
<param-value>Config\pof-config.xml</param-value>
</init-param>
</init-params>
</serializer>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
</cache-config>
Regards
Nitin Jain
Similar Messages
-
Error 65575: overrun error while reading data from NI 9871
Hello everyone,
I am new here. I configured NI 9871 in RS-485 mode to acquire data from a sensor at the data rate of 8 samples per second. While reading data from sensor, sometimes I got the error 65575: "An overrun error has occurred in the data being read. Ensure that the module Flow Control is configured correctly." I didn't understand the error, how can I fix it, what dose the flow control means.
I will be very thankful if anybody help me to fix this error.
Thanks
WasifHello Wasif,
The error you are getting presents itself when the hardware buffer is full and new data is coming in. Data buffer is 64 bytes. One thing to try is to clear the RX FIFO after every read. Please refer to the following link that talks about the method.
http://zone.ni.com/reference/en-XX/help/370984R-01/lvaddon11/crio-9871/
Hope this help you solve the issue.
Regards
Luis S
Application Engineer
National Instruments -
Error while reading data from MapMessage using MDB
Hi,
I have written a small client program to send a message to a queue and an MDB receives the message in the onMessage() method. The message is of type MapMessage. I set key value pairs and send the message in a queue. When I try to read data from MapMessage inside onMessage() method of MDB, I get an exception:-
javax.jms.MessageNotReadableException: In write mode
When I send the message, by default the readonlymode is false. How do I set the mode to readonly exclusively in case of MapMessage ?
SirishaHi,
I do not have any problem with TextMessages...I works fine..It is only with MapMessage that I am not able to read the values..Before sending the message, the message has the flag "readMode" set to false by default by the server...R there any configurations to be made to any files like web.xml or server.xml or jms.xml ?
I am running my JMS application on JDeveloper IDE that has an in-built OC4J server which supports JMS. -
Error while reading data from backend system.
Hi all,
When i click on personnel information iview i am getting following error
EIC Authentication
An error occurred while data was read from your ERP system. Contact your system administrator.
I used SQL TRACE and RFC TRACE to find where it got stopped below see the trace result.
14 PA0105 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "USRTY" = '0001' AND "USRID" = 'ESS_USER1'
988 PA0105 FETCH 1 1403
14 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
665 PA0001 FETCH 1 1403
17 PA0000 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
615 PA0000 FETCH 1 1403
25 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
896 PA0001 FETCH 1 1403
16 PA0002 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
783 PA0002 FETCH 1 1403
13.178 ? Server 1 0 EPSAND1 ? Server HREIC_GET_AUTHENTICATION_ESS 643 309
What is the solution to solve this problem ?
Thanks and regards,
PhanikumarLooks like authorization issue. Could you confirm whether proper authorizations have given to this user?
Also, run the application again get an error and then go to Transaction ST22 and see if there is any system dump for this user.
Regards,
Nitin -
Error while reading data from SharePoint List - using object model
Any idea what could be reason for this error:-
Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.SPListItemCollection.EnsureListItemsData()
at Microsoft.SharePoint.SPListItemCollection.GetDataTableCore(Boolean isJsGrid)
at HRCompetencyGuide.SPHelper.<>c__DisplayClass2.<getDataTableFromList>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad NizamuddinIt is a simple code:- below is the part of the code taken from the method
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(siteURL))
if (site != null)
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists.TryGetList(listName);
if (whereQuery == null)
collection = list.GetItems().GetDataTable();
else
collection = list.GetItems(whereQuery).GetDataTable();
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin -
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell -- -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea? -
Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7
Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./ -
Error while loading data from 0FI_TX_4 to ODS
Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
TonyHow are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks -
Fatal error while fetching data from bi
hi,
i am getting following error while fetching data from bi using select statement
i have written code in this way
SELECT [Measures].[D2GFTNHIOMI7KWV99SD7GPLTU] ON COLUMNS, NON EMPTY { [DEM_STATE].MEMBERS} ON ROWS FROM DEM_CUBE/TEST_F_8
error description when i click on test
Fatal Error
com.lighthammer.webservice.SoapException: The XML for Analysis provider encountered an errorthanks for answering .but when i tried writing the statement in transaction 'MDXTEST' and clicked on check i am getting following error
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
SO I WENT IN SM 59 TO CHECK THE CONNECTION.
CAN U TELL ME WHAT CONFIGERATION I NEED TO DO FOR MAKING SELECT STATEMENTS WORK? -
Error while reading data for reporting
Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
SandyHi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy -
Problem while reading data from Serial Port
Hi All,
I am facing some problem while reading data from Serial Port.
As per the requirement I am writing the data on Serial Port and waiting for response of that data.
Notification for data availabilty is checked with method public void serialEvent(SerialPortEvent event) of javax.comm.SerialPortEventListener.
When we are writing data on the port one thread i.e. "main" thread is generated and when data availability event occures another thread "Win32SerialPort Notification thread" is generated. This creates problem for me as we can't control thread processing.
So can anybody pls explain me how to overcome this problem?
Regards,
NehaMy Problem is:-
I am simoultaneouly wrting data on port & reading data from port.
First I write data on port using outputStream.write() method. Now when target side sends me response back for the request on serial port DATA_AVAILABLE of SerialPortEventListner event occured,we are reading data from serial port.Now till the time we didn't get the response from target next command can't be written on the serial port. When we are writing data on port main thread is executed.Now my problem starts when DATA_AVAILABLE event occured.At this point another thread is created.Due to this my program writes data of next command without reading response of previous command.To solve this prob. I have used wait() & notify() methods as follows.But again due to this my pc hangs after execution of 2 commands. (PC hang in while loop in a code provided below.)
From SOPs I could figure it out that after 2 commands we are not able to write data on serial port so DATA_AVAILABLE event doesn't occure n pro. goes in wait state.
Can anybody help me to solve this issue.
Neha.
Code:
public void serialEvent(SerialPortEvent event)
switch (event.getEventType())
case SerialPortEvent.BI:
case SerialPortEvent.OE:
case SerialPortEvent.FE:
case SerialPortEvent.PE:
case SerialPortEvent.CD:
case SerialPortEvent.CTS:
case SerialPortEvent.DSR:
case SerialPortEvent.RI:
case SerialPortEvent.OUTPUT_BUFFER_EMPTY:
break;
case SerialPortEvent.DATA_AVAILABLE:
try
dataThread = Thread.currentThread();
dataThread.setPriority(10);
dataAvailable = true;
byte[] tempArray=new byte[availableBytes];
inputStream.read(tempArray);
catch (IOException io)
SOP(io, "Error in serialEvent callback call for event DATA_AVAILABLE");
public void writetoPort(byte[] data) throws IOException
outputStream.write(data);
while(finalTimeOut >= actualTime)
if( ! dataAvailable)
actualTime = System.currentTimeMillis();
else
synchronized (mainThread)
mainThread = Thread.currentThread();
mainThread.wait();
public void sendDatatoUser(byte[] b) throws Exception, HWCCSystemFailure
obj.returnData(b);
synchronized(mainThread)
mainThread.notify();
-
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Error while reading data through External Table!!!
CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
APLet's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin
Maybe you are looking for
-
After ios5 i no longer have any music on my iphone
I updated my iphone 4 tp the ios5 and when it was done i no longer have any of my music on my phone. i tried going onto itunes on my computer to re sync it back but it doesnt work. any help on how i can get all of my songs back to my iphone?????
-
How do i download all my music onto new mac from icloud match?
I have over 7000 songs I would like to transfer from my old laptop to my new one (macbook to macbook). I opened itunes match and they showed up with the download cloud next to each song. 1) when i click on the cloud nothing happens 2) once I do get
-
The different types of User accounts
Hello, This mainly stems from the fact I would like to add a Router to my CNA (Cisco Network Assistant) community. And am not sure which user credentials I need to apply on CLI. To note I have enabled IP http server. So from the list below what are
-
Impact of creating org level for PERSA
Hi, I am currently on a HCM project, and have been requested to make personnel area an org level. The security currently is working by Personnel area, with their org structure using location on personnel area, and subarea for region. Because we are
-
Can I Upgrade my computer to Lion. I have a 2 GHz Intel Core Duo Processor. My computer is 6 years old. Right now I have Snow Leopard.