Error while reading from device

I just upgraded from a 3gs to the iPhone 4 32GB. I upgraded to the newest iTunes. The phone is still using iOS 4.0.
When syncing large movies that worked fine on the 3gs, I get the message "Attempting to copy to the "my phone name" failed. An error occured while reading from the device.
Everything else synced fine, and some small homemade movies synced fine. Just the 2 that I had installed from "data discs" I got with DVDs won't sync. They play fine in iTunes.
Any thoughts????
Gene

Problem solved... after reading around on the Internet I tried some ideas. The one that fixed the problem was the fact that I had a 6 foot usb extension cable on my system (not front facing usb ports). I plugged the iPhone data cable directly into the back of the PC and it fixed the issue.
Thanks
Gene

Similar Messages

"error occured while reading from device"

when trying to sync our itouches the device is initailly recongnized in itunes and will begin to sync , but never gets through the whole proccess - each time it gets to a different step, but always ends with error message "ipod cannot sync as an error occured while reading from device" or something close to that...any ideas or help please....
i have checked the usb drivers...uninstalled and reinstalled itunes and removed the security software that I can find....

It could be to either a problem with a "file" that is either one the iPod or on the computer that is trying to be read for syncing. I would in order:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod via iTunes. First from backup then to factory defaults/new iPod.

Message failing in SXMB_moni----Error while reading from the secure store

Hi,
The scenario is as below
A file is picked up from a folder and processed to enrich it.This enriched file is then written back in a different folder.
The message is failing in sxmb_moni while trying to write the file in the folder.
The PI system is a system copy of another system and few of the configuration objects are transported through a tpz file to this PI system.The file receiver channel used to write this file is also transported through this tpz file.
Below is the error seen in moni.:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText>Error while reading from the secure store: ERROR_U: No service user password found for Adapter Engine</SAP:AdditionalText><SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
Below is Trace log:
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP"></Trace>
<Trace level="1" type="T">error reading secstore:Error while reading from the secure store: ERROR_UNKNOWN: System-dependent data for entry changed: / (SECSTORE,031) </Trace>
<Trace level="1" type="System_Error">Error while reading access data (URL, user, password) for the Adapter Engine </Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
Is this because PI system is a system copy of another system ?
Regards,
Sneha

Error while reading access data (URL, user, password) for the Adapter Engine
Check out Michal's reply:
Re: URL for Central Adapter Engine
As you said there was a system copy it may be the case that some things were not configured properly

DPM encountered an error while reading from the recovery point used for recovery.

Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.

Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Access Denied error while reading from filestream

Hi Everyone.
I have an intranet application that stores files in SQL filestream.
On my dev machine, everything works like a charm.
I'm able to upload and store files into SQL filestream (AjaxUpload) and able to downlaod them.
On the live server, I'm able to upload files, delete them, but when I try to download the file from filestream, I get the following error:
Access is denied
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: Access is denied
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): Access is denied]
System.Data.SqlTypes.SqlFileStream.OpenSqlFileStream(String path, Byte[] transactionContext, FileAccess access, FileOptions options, Int64 allocationSize) +1465594
System.Data.SqlTypes.SqlFileStream..ctor(String path, Byte[] transactionContext, FileAccess access, FileOptions options, Int64 allocationSize) +398
System.Data.SqlTypes.SqlFileStream..ctor(String path, Byte[] transactionContext, FileAccess access) +27
quotes_GetFileStream.quotes_GetFileStream_Load(Object sender, EventArgs e) +740
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3048
The application pool is set to integrated, V.4.0, and I use a domain user for the identity authentication back to SQL.
I gave that user DB_Owner rights to the SQL Database for that application.
Even tried giving it all the SQL Server Roles, though i still get the above error.
When I change the Identity username to mine (I have Domain Admin rights), everything works flawlessly on the live server.
What rights am I missing to give that user so he can read from SQL filestream properly.
Here is the block of code that gets the file from filestream and pushes it to the browser, maybe I'm missing something here (though once i modify the user it works great).
Dim RecId As Integer = -1
If Not IsNothing(Request.QueryString("ID")) And IsNumeric(Request.QueryString("ID")) Then
RecId = CType(Request.QueryString("ID"), Integer)
End If
Dim ConString As String = ConfigurationManager.ConnectionStrings("ConnectionString").ToString
Using Con As SqlConnection = New SqlConnection(ConString)
Con.Open()
Dim txn As SqlTransaction = Con.BeginTransaction()
Dim Sql As String = "SELECT FileData.PathName() , GET_FILESTREAM_TRANSACTION_CONTEXT() as TransactionContext, [FileName], [FileExtension] FROM [QAttach] where RecId = @RecId"
Dim cmd As SqlCommand = New SqlCommand(Sql, Con, txn)
cmd.Parameters.Add("@RecID", Data.SqlDbType.Int).Value = RecId
Dim Rdr As SqlDataReader = cmd.ExecuteReader()
While Rdr.Read()
Dim FilePath As String = Rdr(0).ToString()
Dim objContext As Byte() = DirectCast(Rdr(1), Byte())
Dim fname As String = Rdr(2).ToString()
Dim FileExtension As String = Rdr(3).ToString()
Dim sfs As SqlFileStream = New SqlFileStream(FilePath, objContext, FileAccess.Read)
Dim Buffer As Byte() = New Byte(CInt(sfs.Length) - 1) {}
sfs.Read(Buffer, 0, Convert.ToInt32(Buffer.Length))
Response.Buffer = True
Response.Charset = ""
Response.Cache.SetCacheability(HttpCacheability.NoCache)
Response.ContentType = FileExtension
Response.AddHeader("content-disposition", "attachment;filename=" & fname)
Response.BinaryWrite(Buffer)
Response.Flush()
Response.End()
sfs.Close()
End While
End Using
Thanks.
Oren

@William Bosacker:
Please accept our apologies for any mistreatment. While there's certainly no legal recourse for posts on an open forum like this, we do take steps to try to keep the forums a pleasant and friendly place to visit, and toward this end, two other moderators
have already cleaned the thread and have begun to address the abuse.
Not to defend the manner in which it was addressed, I must still point out that necro posting to a thread (this thread is from late 2013) and proposing your post as an answer are both generally discouraged. Again, I cannot condone the way in which it was
presented, but I can understand why the other contributors thought something should be said.
The recommended way to contribute information like this would be to create a new Discussion thread with content something like:
"I was experiencing XYZ issue and while searching for a resolution I found this thread [link to old thread]. But after trying A, B, and C, I found that the following actually resolved my problem [code snippet]. I thought this might be helpful
for anyone else with this issue... yada yada"
In the case of this original thread, the issue was most certainly permission related. While the underlying network permissions would certainly need to allow that user to access the server, the root problem may well have been within the SQL table permissions
themselves. The OP of the original thread really didn't provide enough context to know if they had the internal database permissions set correctly.
The information you've provided essentially shows one way to set the table permissions, but it isn't necessarily the only way. Its also possible that the issue could be resolved by modifying permission entries within the SQL manager rather than through
a particular script file. So while this information may indeed be helpful to someone in the future, it does not necessarily answer the question of this thread. Only the OP has enough information to know if this can be applied to their situation;
and since the thread is several years old and was originally closed by a moderator, there is very little chance that the OP will be back to respond.
Hopefully this clears the air a little and will allow us all to get back to trying to help the VB development community within the guidelines of the forum.
Reed Kimble - "When you do things right, people won't be sure you've done anything at all"

Java Heap Space error while reading from Excel

Hello,
I have a data flow which reads from excel and updates records in an oracle table.
When the data flow tries to read the excel I get a java Heap space Error.
Error preparing to read <SUPP_STG3_FILE1>: <Java heap space>.
Data flow <DF_SUPP_STG3_UPD> is terminated due to error <58105>.
I have configured Excel Adapter since the server is on UNIX. BOExcelAdapter shows status as red once the execution fails. Before that BOExcel adapter status is green.
BOExcelAdapter Trace:
1/13/12 10:57:38 PM Thread[Thread-6,5,main]      Received an error message from the message broker. [Communication failure. Read timed out]. Will exit adapter immediately.
1/13/12 10:57:47 PM Thread[main,5,main]      Create broker client for life-cycle management. Host:port = hikalxboes01:4001
1/13/12 10:57:47 PM Thread[main,5,main]      Create broker client for data exchange with ASP. Host:port = hikalxboes01:4001. Client ID = com.acta.adapter.msexceladapter.MSExcelAdapter.data_18
1/13/12 10:57:47 PM Thread[Thread-11,5,main]      Create broker client for real-time services with ASP. Host:port = 'hikalxboes01:4000''.
1/13/12 10:57:47 PM Thread[Thread-11,5,main]      Start instance [BOExcelAdapter] of adapter [com.acta.adapter.msexceladapter.MSExcelAdapter].
1/13/12 10:57:47 PM Thread[Thread-11,5,main]      Register the client ID [com.acta.adapter.msexceladapter.MSExcelAdapter.data_18] and adapter destination [hikalxboes01:4001] with the adapter manager.
1/13/12 10:57:47 PM Thread[Thread-11,5,main]      Registration complete.
1/13/12 10:58:10 PM Thread[Thread-10,5,main]      java.lang.OutOfMemoryError: Java heap space
     at org.apache.poi.hssf.usermodel.HSSFRow.addCell(HSSFRow.java:273)
     at org.apache.poi.hssf.usermodel.HSSFRow.createCellFromRecord(HSSFRow.java:196)
     at org.apache.poi.hssf.usermodel.HSSFSheet.setPropertiesFromSheet(HSSFSheet.java:183)
     at org.apache.poi.hssf.usermodel.HSSFSheet.<init>(HSSFSheet.java:128)
     at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:283)
     at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:196)
     at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:178)
     at com.acta.adapter.msexceladapter.MSExcelAdapterReadTable.begin(MSExcelAdapterReadTable.java:537)
     at com.acta.adapter.sdk.StreamOperationWrapper.beginStream(StreamOperationWrapper.java:88)
     at com.acta.adapter.sdk.AdapterRunnerImpl.processBeginOperation(AdapterRunnerImpl.java:1762)
     at com.acta.adapter.sdk.AdapterServiceDataListener.handleBrokerMessage(AdapterServiceDataListener.java:90)
     at com.acta.brokerclient.BrokerClient.handleMessage(BrokerClient.java:439)
     at com.acta.brokerclient.BrokerClient.access$100(BrokerClient.java:53)
     at com.acta.brokerclient.BrokerClient$MessageHandler.run(BrokerClient.java:1621)
     at com.acta.brokerclient.ThreadPool$PoolThread.run(ThreadPool.java:100)
BOExcelAdapter Error Log:
1/13/12 10:58:10 PM      java.lang.OutOfMemoryError: Java heap space
     at org.apache.poi.hssf.usermodel.HSSFRow.addCell(HSSFRow.java:273)
     at org.apache.poi.hssf.usermodel.HSSFRow.createCellFromRecord(HSSFRow.java:196)
     at org.apache.poi.hssf.usermodel.HSSFSheet.setPropertiesFromSheet(HSSFSheet.java:183)
     at org.apache.poi.hssf.usermodel.HSSFSheet.<init>(HSSFSheet.java:128)
     at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:283)
     at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:196)
     at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:178)
     at com.acta.adapter.msexceladapter.MSExcelAdapterReadTable.begin(MSExcelAdapterReadTable.java:537)
     at com.acta.adapter.sdk.StreamOperationWrapper.beginStream(StreamOperationWrapper.java:88)
     at com.acta.adapter.sdk.AdapterRunnerImpl.processBeginOperation(AdapterRunnerImpl.java:1762)
     at com.acta.adapter.sdk.AdapterServiceDataListener.handleBrokerMessage(AdapterServiceDataListener.java:90)
     at com.acta.brokerclient.BrokerClient.handleMessage(BrokerClient.java:439)
     at com.acta.brokerclient.BrokerClient.access$100(BrokerClient.java:53)
     at com.acta.brokerclient.BrokerClient$MessageHandler.run(BrokerClient.java:1621)
     at com.acta.brokerclient.ThreadPool$PoolThread.run(ThreadPool.java:100)

As Jay mentioned above it might be due to the size of the Excel spreadsheet as you might be hitting the limitation in Apache POI library used for adapter.
What is the size of the Excel file?
What is the value of -Xmx parameter - see DS Management Console > Adapter configuration page.
Thank you,
Viacheslav.

Error while reading from a URL

Hi All
When I am trying to read a URL I am getting the following error.
u201CServer redirected too many times (20)u201D
I get the error only when I run the code from a server application. When I execute the code locally in a java class, the code works with out any errors.
I printed the the Response code which was 401 (Unauthorized).
When i give the URL in the browser, the file opens without any problems.
This is the code that I have used
URL url = new URL( "http://hydhtc137407d/Test/Pdf1.pdf" );
                  URLConnection urlc = url.openConnection();
                  if (urlc instanceof HttpURLConnection) {
                       System.out.println("This is HttpURLConnection");
                       ((HttpURLConnection)urlc).setRequestMethod("GET");
                 // urlc.setDoOutput(true);
                  urlc.setDoInput(true);
                  urlc.setUseCaches(false);
                // ((HttpURLConnection)urlc).setRequestMethod("GET");
                  bis = new BufferedInputStream( urlc.getInputStream());
                  BufferedReader br = new BufferedReader( new InputStreamReader(bis));
                  String line;
                  while ((line = br.readLine()) != null)
                       wdComponentAPI.getMessageManager().reportSuccess(line);
Any help is appreciated
Deepu

Hi
That becouse of when you are accessing that URL from local it is directiong it to the server....that's fine..but whenever you start accessing it form Server..ance again it is redirecting to the server. ie why it is giving the problem,
Put the candition whenever you accessing it from server not to redirect to sever.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/2f/e7574174c58547e10000000a1550b0/frameset.htm
Thanks

An error occurred while ready from devices

I am using windows vista and trying to sync up to my pc. When I try to sync up, I get the message that an error occurred while reading from device and an error occurred while writing to the device. I have two iPods. One iPod had a restore done to it. One iPod is brand new. Both iPods can download apps through the internet without any problems.

You may find this article of assistance:
http://pondini.org/OSX/Setup.html
Ciao.

Good Afternoon my computer had an unexpected restart while I was editing a picture in lightroom. Now when I try to open lightroom I get an error message stating " lightroom encountered an error when reading from its preview cache and needs to quit" Does a

I keep getting an error message saying that lightroom encountered an error while reading from its preview cache and needs to quit. Can someone please help me fix this.

Have a look at this previous thread: Re: "Lightroom encountered and error when reading from its preview cache and needs to quit"

HT4528 I can't seem to sync my iPhone with iTunes. I keep getting this message: iTunes could not connect to the iPhone because an error occurred while reading from this device. What can I do?

I can't seem to sync my iPhone to my computer; I keep getting this message: "iTunes could not connect to the iPhone because an error occurred while reading from this device." I get the same message with my iPad, even though they all share the same account. What can I do?

This could be caused by a USB connection issue. Make sure the iPhone is directly connected to the Mac using the USB cable it came with. Also, try disconnecting all other USB devices.
If you haven't already try resetting the iPhone by holding the Home and Sleep/Wake buttons until you see an Apple logo as described here:http://docs.info.apple.com/article.html?artnum=305743

Error occured while reading from the device

I need help!!! whenever i try to update my iphone to the new 1.1.1 version, i get an error message saying "error occured while reading from the device" the same message comes up when i try to restore it. i havent mod'd my phone in any way. does anyone know whats wrong or how to fix it?

I have the same problem. Was a solution ever given ?

"An error occured while reading from this device"

"An error occured while reading from this device" is the message I get whenever I try to sync my iPad to iTunes.
The only way I can sync is to do a restore and then put everything back on it.
Can anybody help?

Make sure you also unisntall
Bonjour,
Apple Mobile Device Service,
Quicktime
and there's a couple of others. there are Apple support articles, but I'm sorry I don't have the articles linked. Also ensure you reboot after all of the uninstalls and reboot you iPad as well. This all fixed my laptop, but as I said, my desktop PC is still acting funny.
As your laptop seems older, and the MB link is suspected on a particular group of newer motherboards, so I doubt your laptop motherboard is the common link.
You might want to double check that its USB2 ports.

I am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
See if that fixes your problem.

When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

Hi Centreless,
If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks for using Apple Support Communities.
Best,
Brett L

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading from device

Similar Messages

Maybe you are looking for