Error while Refreshing Dashboard
Hi Experts,
I have created a Dashboard from a Webi report using Live Office... The reports consists of prompts for year which is bounded with an excel cell.
Now in the Preview mode when i am trying to select another Year Value, The dashboard is showing an error as follows
"unable to open socket to talk to CMS ####:8080 (FWM 01005)"
Referring to some other posts in SDN i figured out that exporting the Dashboard to CMS might solve the issue.
After exporting the Dashboard to CMS when i try to change the Year Value, i am facing the error below:
"Failed to fetch data provider data. (LO 26306)"
What might be the possible cause to this error?
Please Help,
Thanks & regards,
NRR
Hi NRR,
Xcelsius changes the Data values into String format. You might want to change the format and then pass the date values. Try using the "Datevalue" function in excel to pass the values.
You could also try checking with the Calendar component.
Thanks,
Amit
Similar Messages
-
Getting error while Enable Dashboard Widget
Dear Experts,
I am getting error while Enable Dashboard Widget
u201CInstall SAP Business One Integration Service before enabling the dashboard widgetu201D
Even I follow all step by step process.
Thanks
KamleshHi Kamlesh,
Have you tried the following:
Deactivate the cockpit in your Business One database - Disable My Cockpit and also disable cockpit in General Settings
Run EventSender Setup (in first step try to avoid using localhost or IP addresses)
In third step press Test Connection, in fourth step make sure that your database is checked, press also Receiver but ton and then Test Connecion.
Finish EventSender setup.
Click on SLD in the B1i Framwork and ensure connection to the Company databsae (B1DI and JDBC) is successful.
Go back to B1i Framework UI, click Scenarios in upper menu, then select Control in left menu and (re)activate Xcelsius scenario.
Restart EventSender service, Integration Service and Proxy services via Servies (Computer Management)
Now you can enable cockpit in your Business One database - enable cockpit in General Settings and then enable My Cockpit.
After installation of B1ic, the company is not listed in the SLD
Delete all entries of table SLSP and SLSPP in SBOCOMMON. Restart integration service. In SAP Business refresh the company list.
These solutions are documented in the attached Note 1619422.
Kind regards
Sean -
we are getting error while refreshing connection on excel sheet which containing data from data source in form of power pivot.
error is "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh:"
I am confused about Configuring the Analysis Service in SharePoint Mode.
What account should be used for Configuring the Analysis Service in SharePoint Mode?
what are the steps and what permissions are required and where to add it?
can you please explain in detail so i can make sure about my account permission properly in my environment?
Do we need to install Analysis service on sharepoint server box or not? if yes, then what are steps to follow it?
it is mentioned here to have two services are running under manages services under sharepoint central,
https://msdn.microsoft.com/en-us/library/jj682085.aspx#bkmk_verify_powerpivot
but we don't have SQL Server Analysis Services
running under Manage
services on server.
what need to be done here to fix this issue ?
Thanks,
Deepak PatelHi Deepak,
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Meanwhile, could you please check if there is any related ULS log for help troubleshoot the issue when error occurs.
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/04/02/powerpivot-for-sharepoint-manual-data-refresh-failing.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Getting error while refreshing the Webi report
Hi Guys,
I am getting error, while refreshing Webi reports. Error like:
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
Could anyone please reply.
Regards,Hi,
If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10 ?
You should check out all the latest corrections from component BW-BEX-OT-MDX
the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
regards,
H -
Database Error while refreshing webi report
Hi,
I am getting following error while refreshing webi report. And also all my scheduled webi reports are getting failed because of same issue. What would be the reason for this error.
Regards,
PRKHi Praveen,
As you are getting error 'IES10901' it is related to database connection issue.
Find below link it might help you.
Database error in Web I ( BO 4.0)
check your universe connections to DB(ODBC connections).
Regards,
Samatha B. -
Getting multiple error while refreshing or scheduling WebI report
Hi BO Admin Experts ,
Feacing multiple errors while refreshing or scheduling webi reports in BI4.0 CMC ,
Please find the below errors :
1)report schedule status failed
2)Parameters : xxxcorp-franklinee; ATOu supply unv
Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
3 ) Format : WebI
Parameters : 10000000000159270
Error Message :CORBA error while communicating with the SL service
Could you please help me on the abive 3 issues for the WebI schedule reports
Cheers ,
Pradeep GorpaduHi,
While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
Regards,
Upendra -
I am getting following error while refreshing connection on excel sheet in power pivot gallery,
my scenario,
using BISM file connection to create and refresh power pivot excel sheet in power pivot gallery
throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
Microsoft.AnalysisServices.ChannelTransport is not available.
i found error in event viewer,
"Activation context generation failed for "C:\Program Files\Microsoft Analysis
Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
what should i do to fix it?
Thanks for help.
Deepak PatelRebecca,
yes, this is issue i am getting.
Activation
context generation failed for "C:\Program
Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
let me know if you can find fix for it.
THanks, -
Error while refreshing BO objects using live office
Hi Forum,
We are getting below error while refreshing the data using Live Office plug-in on PPT.
“An error occurred while receiving the HTTP response to http://........ This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server.”
This error comes in exact 5 minutes.
The server name used for web service is from a clustered environment. When the individual node is used Live office refresh works fine but while using the generic name refresh fails.
Please provide your inputs.Hi Honed,
Take the backup of dsws.properties file and do the following changes:
properties values
domain @<clustername>
session.timeout value higher than 5 minutes
Below pdf can help you further:
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_wssdk_admin_en.pdf
Regards,
Yuvraj -
NO INTEGRATION SERVER, Error while refreshing the XI runtime cache
Hello guys,
I have the following error in an integration scenario of SOAP -> PI -> PROXY.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">BUSINESS_SYSTEM</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>NO INTEGRATION SERVER</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anyone migth now what could be happening? I already checked The Receiver XI Adapter parameters and everything seems to be rigth.
Thanks for your help,
Regards,
FelipeHi,
The error is clearly showing there is cache error.
To resolve this..go to SXI_CACHE tcode and do a delta cache refresh or full cache refresh.
That will solve ur problem
Please award marks if found useful.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from requesting points
SDN PI/XI Forum Moderator
Thanks
Hamja -
Error while refreshing the XI runtime cache
Hello All,
Here is what happened.
After PI7.0 install with client 001, I did the BPM scenario and it worked. After the performing the client copy the BPM stopped working with the new client. I did the client copy per note 940309.
The file is getting picked up (set the processing mode to delete).
Getting the following error in <b>SXMB_MONI</b>.
<b>"SXMB_MONI_BPE"</b> doesn't show any info as the file has never made to BPM (I guess).
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
As always help is much appreciated and points will be given.
Regards,
N.SCan U check the RFC destination INTEGRATION_DIRECTORY_HMI.
Check the connection, it should give response code 500.
otherwise check whether U have given the correct URL
in the path prefix.
/dir/CacheRefresh
Check the User has proper authorization.
With regards
K.Varadharajan -
Getting error - "Error while refreshing the XI runtime cache"
Hi,
for both inbound and outbound I am getting error - "Error while refreshing the XI runtime cache". Please find the error details below:
<u><b>FOR INBOUND:</b></u>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
<u><b>FOR OUTBOUND</b></u>
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Identification
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
thanks in advance for your inputs..Rajesh,
>>500 Internal Server Error
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: REQID not found].
Exception id: [001279CFE174006E000000B900001D3C0004275E9952BCCA]
This is not an error status. This is an expected result. You can see this in XI configuration guide.
Regards,
Jai Shankar -
Hi ,
My scnearo was working fine . Suddenly i am getting this error in moni
error while refreshing cache
if any one ever faced this problem plz let me now
thanks
amitHi Amit,
1. Check the RFC destination INTEGRATION_DIRECTORY_HMI in transaction sm59. Check the connection and the username & pwd.
2. Check the HTTP services default_host/sap/xi/cache and default_host/sap/xi/cache_ssl. They should be active.
There are other troubleshooting steps outlined in the document 'How To Handle Caches in SAP XI 3.0'. I suggest you go through them.
https://websmp104.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Cheers
Manish -
Error while refreshing a report using local csv file
Hi,
I'm using BI 4.1 SP02.
While using Rich client, I've created a report with some merged queries, while one of the queries is a local CSV file - saved on AD in some server, and not on the repository inside BO.
While trying to refresh the report with the Rich client, it all went great.
Now, while using BI Launchpad java based app, I can't refresh the report - I get the following error:
"An Internal error occurred while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270) (WIS 30270)"
Should I be able to refresh a report without the Rich if it contains a local file (which is possible to EDIT only with rich) ?
If so, then did someone ran into this error?
Thank you,
Or.First of all, thanks for both of the replies.
Second,
my problem is unlikely have to do something with permissions from one reasons -
when the report is using XLS\XLSX on same folder(with same name prefix) - the report is running without any problem.
Only problem is while refreshing without Rich while the source is network CSV file.
Any suggestions?
Thanks. -
Ping Error while refreshing webi in view/HTML mode
Hi all,
while refreshing a webi report from Infoview in XI R2 SP6, I'm getting the following error:
Ping: Infoview cannot connect to the server. Close the report panel and try to connect again or see your Business Objects Administrator.
If I click on OK, the the refresh of the LOV continues and data is refreshed.
The error is not occuring if refreshing from the Java Report Panel.
Have you ever seen this error?
Can you help me please.
Weblogic 8.1 SP4.
Solaris 8.Hi,
we were facing the same problem with InfoView in XI 3.1.
in our case, it helped to increase the numeric default-value (20000 i.e. 20 Sec.) of the
"<tt>ping_waitTimeoutID</tt>"
in the JavaScript-file "<tt>viewer.js</tt>" in directory
<tt>$/bobje/tomcat/webapps/AnalyticalReporting/viewers/cdz_adv/language/LANG/scripts/</tt>
Where for this installation <tt> /LANG/</tt>* stands for "/de/" and "/en/".
1665 function ping()
1666 {
1667 /* ping_waitTimeoutID=setInterval("checkTheConnectionn()",20000); */
1668 ping_waitTimeoutID=setInterval("checkTheConnectionn()",80000);
1669 }
best regards,
pkunk* -
WIS 10901 error while refreshing report in rich client
I'm facing a strange issue while refreshing a report from Rich client. Here are details
Environment: BO XI 3.1 SP3, Oracle application DB. Weu2019ve 2 BO servers (S1 and S2) on cluster and load balancer (common URL) in front.
While login to S1 with 6400 port, I can refresh report in rich client.
While login to S2 on 6400 port or using common url, during refresh gives below error u2013
u201CA database error occurred. Database error text is: (CS) u201CDBDriver failed to load: C:\Program Files\.....\dbd_oci.dllu201D (The specified procedure canu2019t be found) (WIS 10901)u201D
Iu2019ve installed oracle8i client on my system. Any idea what causing this issue?Yes. Oracle 10g client installed on both application server. I've teste the universe connection from server, it's working fine.
Any idea what could be probable causes of "DBDriver failed to load: C:\Program Files\.....\dbd_oci.dllu201D error?
One observation, the path of dbd_oci.dll is the BO installation directory of my local machine (on server BO is not installed on C drive). Why it's referring dbd_oci.dll from local client even in 3 tier mode?
Maybe you are looking for
-
Unable to open Sharepoint site with Designer "Folder name is not valid"
Hi all, I'm using SharePoint 2013 with SharePoint Designer 2013, but currently I'm facing a weird behaviour. I can open my preproduction SharePoint portal with SharePoint Designer 2013, but when I'm trying to open my production environment, I'm recei
-
PFD for 2 Medical Bills at the Same CA Agency
How do I proceed? Made the mistake of waiting for a medical bill for myself to be ran through our insurance. No idea why, but it never did and went to Alliance Collections in December of 2014 for $205. Second bill for our son went to Alliance Coll
-
Confusion about ipod 4th gen screens
I am a bit confused, because I keep reading conflicting accounts about the ipod touch 4th gen's screen shattering easily. Some people claim their screen broke without even being dropped , falling off a lap onto a bed, or shattering when dropped from
-
Question. Best practice is to configure iBGP via loopback interface. My question is, is that valid statement for scenario where two BGP peers are seperated by a firewall?
-
Using Nokia N95 with Mac - maps etc...
Does anybody know if the new Nokia N95 can be synced up with Mac. The nokia website only mentions the PC suite for windows. I have managed to download photos via the usb cable, but would like to download maps for the built-in satnav, transfer videos