Error while refreshing the BO WebI report

Dear Friends,
I have created BO report on top of BICS Query in BO 4.0(have used aroung 15 BICS queries in to the report) and able to see the correct data.
I have used hierarchies and also selected levels in to webI report. Last week I am able to refresh the report but since two days I am getting some strange errors.
Errors:
1) Unable to run the empty Query.
2) When trying to invoke the method com.sap.ip.bi.bics.dataacess.consumer.queryview.results.et.IRsAxisTupleelement.Getcharateristicmember() of an object loaded from Local Variable 'element'(WIS00000)
Can you please help me on this isse.
Regards,
Eswar

Hi,
Was there any recent Patch up/downgrade done in your environment?
What is the current Patch level?
Also, did you get a chance to look into the Fixed Issue ADAPT01626356?
Regards,
Muthulakshmi Ramanathan

Similar Messages

  • Getting multiple error while refreshing or scheduling WebI report

    Hi BO Admin Experts ,
    Feacing  multiple errors  while refreshing or scheduling webi reports in BI4.0 CMC ,
    Please find the below errors :
    1)report schedule status failed
    2)Parameters : xxxcorp-franklinee; ATOu supply unv
    Error Message : An internal error occured while calling 'ProcessDPcmndsEx' API (Error:ERR_WIS_30270)
    3 ) Format : WebI
    Parameters : 10000000000159270
    Error Message :CORBA error while communicating with the SL service
    Could you please help me on the abive 3 issues for the WebI schedule reports
    Cheers ,
    Pradeep Gorpadu

    Hi,
    While refreshing the WEBI Reports would recommend you check the WEBI PROCESSING Server's last changed date from CMC--> Servers.
    Check when you are refreshing the reports, do you see the time stamp changed of WEBI PROCESSING servers?
    Do you keep getting this error messages for all WEBI reports? Can you re-produce this with simple e-fashion reports as well?
    After that go to the node where WEBI PROCESSING servers installed and check on the event viewer details if you see any relevant error messages.
    Regards,
    Upendra

  • Error While Executing the Asset history report S_ALR_87011990

    Hi,
    I am getting the below error while executing the Asset History Report - S_ALR_87011990
    No data was selected
    Message no. AB064
    Kindly advice me

    Hi,
    Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

  • NO INTEGRATION SERVER, Error while refreshing the XI runtime cache

    Hello guys,
    I have the following error in an integration scenario of SOAP -> PI -> PROXY.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Inbound Message
      -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">BUSINESS_SYSTEM</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>NO INTEGRATION SERVER</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Does anyone migth now what could be happening? I already checked The Receiver XI Adapter parameters and everything seems to be rigth.
    Thanks for your help,
    Regards,
    Felipe

    Hi,
    The error is clearly showing there is cache error.
    To resolve this..go to SXI_CACHE tcode and do a delta cache refresh or full cache refresh.
    That will solve ur problem
    Please award marks if found useful.
    Please read the Forum's Rules of Engagement,
    i.e.,
    [/thread/117188 [original link is broken];
    and refrain from requesting points
    SDN PI/XI Forum Moderator
    Thanks
    Hamja

  • Error while refreshing the XI runtime cache

    Hello All,
       Here is what happened.
    After PI7.0 install with client 001, I did the BPM scenario and it worked. After the performing the client copy the BPM stopped working with the new client. I did the client copy per note 940309.
    The file is getting picked up (set the processing mode to delete).
    Getting  the following error in <b>SXMB_MONI</b>.
    <b>"SXMB_MONI_BPE"</b> doesn't show any info as the file has never made to BPM (I guess).
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Identification
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">UPDATE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    As always help is much appreciated and points will be given.
    Regards,
    N.S

    Can U check the RFC destination INTEGRATION_DIRECTORY_HMI.
    Check the connection, it should give response code 500.
    otherwise check whether U have given the correct URL
    in the path prefix.
    /dir/CacheRefresh
    Check the User has proper authorization.
    With regards
    K.Varadharajan

  • Getting error - "Error while refreshing the XI runtime cache"

    Hi,
    for both inbound and outbound I am getting error - "Error while refreshing the XI runtime cache". Please find the error details below:
    <u><b>FOR INBOUND:</b></u>
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Identification
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">UPDATE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>Error when reading HTTP destination: INTEGRATION_DIRECTORY_HMI.</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    <u><b>FOR OUTBOUND</b></u>
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Identification
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="XICACHE">UPDATE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while refreshing the XI runtime cache</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    thanks in advance for your inputs..

    Rajesh,
    >>500 Internal Server Error
    Application error occurred during request processing.
    Details: Error [javax.servlet.ServletException: REQID not found].
    Exception id: [001279CFE174006E000000B900001D3C0004275E9952BCCA]
    This is not an error status. This is an expected result. You can see this in XI configuration guide.
    Regards,
    Jai Shankar

  • Getting error while refreshing the Webi report

    Hi Guys,
    I am getting error, while refreshing Webi reports. Error like:
    A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Time limit exceeded.. (WIS 10901)
    Could anyone please reply.
    Regards,

    Hi,
    If it's not the universe limits, then I think you've hit the "MDX result contains too many cells" (more than 1million) problem.
    So, I suspect a long running query, no filters/variable restrictions, and You've probably got a dump in ST22.
    I don't know what BW you have, but if it is BW 7, do you have Enhancement Pack 01 and SP05<->10  ?
    You should check out all the latest corrections from component BW-BEX-OT-MDX
    the final proof of the pudding would be to enable MDA / SOFA log , capture the MDX SELECT statement and test it in BW MDXTEST - i bet you get the same error there.
    regards,
    H

  • Errors while submitting the SQL * Plus  Report

    I am getting th efollowing Error while submitting the Concurrent request to run a report.
    FND_CANNOT FIND FILE
    concurrent manager encountered an error while running sql * plus for yours concurrent request
    Please respond ASAP

    Hi,
    Duplicate post see:
    Please advise on the Error immediately
    Regards,
    Gareth
    Blog: http://garethroberts.blogspot.com/

  • Reg: Error while refreshing the WebI Report

    Hi all,
    I created WebI report based on universe that is connected to Excel data. Through DSN I m accesing Excel Data . I created same DSN in server also. If I refresh the webI Report in BO server it tells the following error.
    A database error occured. The database error text is: [Microsoft][ODBC Excel Driver] System resource exceeded.. (WIS 10901)
    Before that its working fine. what may be the problem?
    Regards,
    Hemalatha J

    This seems to be a data source not a BO problem. Take a look here:
    http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/05aaccd6-2a38-4784-b310-99e34b8d1a35
    Regards,
    STratos

  • We couldn't refresh the connection 'OData Assignements Data' Error : While access the project overveiw report in brower and in Excel 2013.

    Hello All,
    Facing this issue while opening the ProjectOverview report in Browers or in Excel 2013.
    Snapshot is attached for furthur reference.
    Error in Excel when clicking on Refresh All, it shows the information to retieving the data but after few moments it prompt this error.
    Second snapshot occurs while opening the report in browser.
    Kindly help.
    REGARDS DANISH DANIE

    Dear Paul,
    1st Query,
    Ans: As I'm using Project Server Permission mode and im logged with the user who is the member of admin group and in administrator group 'Access
    Project Server Reporting Service' is ticked on. So, the concern regarding permission is resolved.
    2nd Query,
    Ans: Im unable to find Project Web App Permission for Excel Web App Refresh' feature in site setting
    of PWA. 
    Snapshot is attached when trying to open report in browser.
    to resolve this followed below mentioned URL but unsuccessfull result
    http://support.microsoft.com/kb/2769345/en-us
    Still facing same issue, issue is not resolved kindly help/suggest.
    Note: Im using Project Server 2013 not Project Online 2013. 

  • Error while connecting executing a webi report from Bex query.

    hi all,
    i need to create one webi report fron Bex query based on sab BW.
    But when I execute the query its shows "Unspecified error invoking method or accessing property "on change DocID"".
    i didnt get this msg.
    please help

    Hi Mohit Gupta,
    Degrade the java version to java 7 update 45 and also degrade the java security level to low from medium. Also delete the java temporary files and also clear your IE browser cache as well.
    This solved the issue for me.
    Thanks,
    Chaitanya Krishna

  • Error while opening the B2C Web Shop

    Hi All,
    Our Basis team has installed the JAVA Stack for CRM 7.0 EHP1. We can successfully open the XCM page for the web shop using the following URL: http://host:port/b2c/admin/xcm/init.do.
    We get a SAP E-Commerce Error page when we try to launch the B2C Web Shop using the following URL:
    http://host:port/b2c/b2c/init.do. The following error messages are shown along with a "Log On" button:
    An application error occurred
    A serious system error has occurred
    The shoplist read from buffer is empty
    Contact the administrator
    Log on
    I have created the Internet B2C Users& specific roles and also done the XCM Configurations (New customer configuration, General Settings & JCO Component created). Restarted the Java Application. However we still get the same error page while launching the web shop. Please help us to rectify this error.
    Also I get a blank-white page when I try to open this URL for maintaining a B2C Shop: http://host:port/shopadmin/shopadmin/init.do?configuration.xcm=Z_MY_SCENARIO
    I can successfully open the URL for SHOPADMIN XCM: http://host:port/shopadmin/admin/xcm/init.do
    Please help us to resolve the issue. How can we maintain the SHOP? Have we missed some configurations?
    Thanks !

    I am not able to open the shopadmin URL for defining a new B2C web shop. This URL does not work : http://host:port/shopadmin/shopadmin/init.do?configuration.xcm=ZMY_SCENARIO. I just get a white blank page.
    I can open the XCM for shopadmin using teh URL: http://host:port/shopadmin/admin/xcm/init.do.
    Thanks.

  • 0ADHOC error while executing the query from Report Designer

    Hi All,
    When I am executing The Query from Report Designer,  am getting the below error.
    Please help me in this regard.
    The initial exception that caused the request to fail was:
    The Web template "0ADHOC" does not exist in the master system
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
    at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
    at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
    at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
    at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
    Thanks,
    KVR

    Hi,
    The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
    Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
    Best regards,
    Janine

  • Error while refreshing the planning applivation with essbase

    Hi all,
    I am facing issue to refresh the planning application to essbase. using version 11.1.1.3.
    getting this error: hyperion.planning.olap.EssbaseException: Invalid outline handle passed to ESSOTL function %s (1060000)
    Please help me if any one knows the solution.
    Thanks in advance,
    Kiran

    Does the following doc Oracle Support help "Planning Database Refresh Error: 'Invalid outline handle passed to ESSOTL function %s (1060000)' [ID 1134003.1]"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Same Application Error - while checking the auditing log report in site settings

    dear all,
    I am getting application error - when I am checking the audit log report from
    Site Settings ->Audit log->Run a custom report ->In the save location - when I click browse button.
    Any inputs to solve the issue will be helpful?
    Cheers
    Sathya

    Hi,
    Try to configure audit settings for a site collection as the link below:
    https://support.office.com/en-us/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
    Or check the blogs below:
    http://sharepointthomas.blogspot.com/2011/07/how-to-enable-audit-functionality-in.html
    http://www.codeproject.com/Articles/431342/Auditing-A-Built-in-Feature-of-SharePoint
    Did you check the ULS log?
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for