Error While Registering a system in UWL
Hi
I have configured a system in UWL after going to Universal Worklist Administration -> Configuration Framework Page -> UWL Systems Configuration.
Now when i am registering it, it shows the following
error:
System SAP_YY_XXXX: com/sap/portal/services/api/connectorgateway/IConnectorGatewayService
Though the corresponding entry for the gateway information has been made in the services file in the drivers/etc:
sapqw41 3341/tcp # SAP Systems Gateway
But still the same error is coming.
Is there any other step which is being missed out.
Any information in this regard will be helpful.
Thanks & regards,
Anupreet
Dear Koti,
It is giving the same error in the backend also.when i click the workitem it is giving the "error while executing the workflow Close Window".
Is there a problem with the workflow template or the UWL Configuration.
Regards
Mustafa
Similar Messages
-
Error while registering SAP ECC system in UWL systems
hi,
Error while registering SAP ECC system in UWL systems.
Errors:
System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '132.147.0.112:sapgw00' not reached
TIME Thu Nov 27 16:12:05 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER 2
Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
After configuration changes in the backend system, you must re-register the system.
regards.
Srinivas.Hi,
you can check few things prior proceeding:
Does your connector test after adding your backend system in portal works fine?
Did you define a system alias?
Make sure your SSO is working,
Also check your Jco detination webdynpro tab.
Regards,
Vamshi. -
Error while registering Oracle JDBC Diagnosability Mbeans?
Hi,
I have installed Oracle 11g 11.1.0.6.0. I am facing problem while executing any command in sql Developer. Below the frame an error message is shown : Error while registering Oracle JDBC Diagnosability Mbeans? and while executing any query like 'select user from dual' error is generated saying connection in busy. I have made connection with system user.so, how to resolve this problem?
ThanksThere are a lot of information in listener.log file , some information i am posting .
Each time i am opening Oracle SQL Developer programme, a error is generated , saying " oracle.jdbc.driver.OracleDriver Error while registering Oracle JDBC Diagnosability MBean.".
Though i can create a new connection and query database tables. But why this error message is generated each time i open Oracle SQL Developer?
06-MAR-2010 20:02:19 * service_update * earth1 * 0
Sat Mar 06 20:03:10 2010
06-MAR-2010 20:03:10 * service_update * earth1 * 0
06-MAR-2010 20:03:19 * service_update * earth1 * 0
Sat Mar 06 20:03:43 2010
06-MAR-2010 20:03:43 * service_update * earth1 * 0
Sat Mar 06 20:04:16 2010
06-MAR-2010 20:04:16 * service_update * earth1 * 0
06-MAR-2010 20:04:17 * (CONNECT_DATA=(SID=EARTH1)(CID=(PROGRAM=F:\app\shyam\product\11.1.0\db_1\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe)(HOST=SHYAM-E23629982)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1360)) * establish * EARTH1 * 0
06-MAR-2010 20:04:19 * service_update * earth1 * 0 -
"Error while registering the Java 2 Runtime Environment registry keys"
"Error while registering the Java 2 Runtime Environment registry keys"
I am getting the above error when trying to install the 1.3 JRE (installed with the 1.3 plug in which I need). As part of my development I have been installing and uninstalling the JRE multiple times. Then, I got the above error when trying to install it, and now it appears to be installed but I cannot uninstall it. When I try to uninstall it, it just remains, and when I try to install it again I get the above error. I have tried cleaning up all javasoft registry entries, but it doesnt seem to have helped. Can anyone help me either completely uninstall the JRE so I can do a clean install or help me get rid of the error above when I install. Is there some registry entries I should be looking at? Anything else? this is quite urgent as I need to test my applet with the plugin installed and not installed - and I currently cant uninstall it. Any ideas?
Thanks for your help
AaronI am getting this same error message when trying to upgrade from 1.3.1_03 to 1.3.1_19.
I have multiple versions of jre's and jdks on my machine.
Anyone else seen this problem or know how to resolve it. -
Getting Connection error while creating Substituion Rule in UWL
Hi Everybody,
Getting below error while creating Substitution Rules in UWL.
"error for the u201Cconnectionu201D to SAP_R3_Finance ".
Can be able to see all Work Items belongs to me. getting the errror while creating Substitution Rule only..
Could anybody tell me what might be the Reason what steps i need to take to resolve this issue.
Thanks,
Naveen KumarHi Uds,
are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
If so try creating the repository file specifying a directory on the Linux server.
For example to:
/tmp/sample_repository
So Choose 'File' from drop down menu
Enter /tmp/sample_repository
Click on create button
This should create the file called sample_repository in /tmp on the Linux server.
Can you tell us what your environment is?
Regards Cel -
Portal Runtime Error while creating new system in portal content
Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log fileHi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun -
RUNTIME ERROR WHILE CREATING NEW SYSTEM IN EP6
Hi
Can anyone solve my problem, i am geting error while creating new system PORTAL FOR to connect biw 3.5 system
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file
thanks in advance
Rockhi,
check the log file and let me the the error.
manish -
Error while registering SOA Composite
Hi all
I used OOTB AutoApproval composite and added mail stuff to that composite. And run the composite and deployed it successfully. I don't want approver, task should be auto-approved. But for other custom composite i deployed and registered the composite. But for this i cann't.
can any one help on this.
But i am not able to register it. I am getting below error while registering
Exception in thread "Main Thread" oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
[java] at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
[java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
[java] at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_1035_WLStub.registerWorkFlowDefinitionx(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
[java] at $Proxy2.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceDelegate.registerWorkFlowDefinition(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
[java] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
[java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
[java] at weblogic.security.Security.runAs(Security.java:41)
[java] at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
[java] at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
[java] at $Proxy3.registerWorkFlowDefinition(Unknown Source)
[java] at oracle.iam.platformservice.workflowregclient.WorkflowRegistration.main(WorkflowRegistration.java:42)
[java] Caused by: oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition: default/AutoApproval!1.2 due to The task ApprovalTask specified for the workflow composite default/AutoApproval!1.2 is not valid
[java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.mapWorkflow(WorkflowRepositoryImpl.java:132)
[java] at oracle.iam.platform.workflowservice.impl.WorkflowRepositoryImpl.registerWorkFlowDefinition(WorkflowRepositoryImpl.java:113)
[java] at oracle.iam.platform.workflowservice.impl.WorkflowServiceImpl.registerWorkFlowDefinition(WorkflowServiceImpl.java:230)
[java] at oracle.iam.platformservice.impl.WorkflowRegistrationServiceImpl.registerWorkFlowDefinition(WorkflowRegistrationServiceImpl.java:38)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB.registerWorkFlowDefinitionx(Unknown Source)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:597)
[java] at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
[java] at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
[java] at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
[java] at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
[java] at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
[java] at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
[java] at $Proxy507.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.__WL_invoke(Unknown Source)
[java] at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl.registerWorkFlowDefinitionx(Unknown Source)
[java] at oracle.iam.platformservice.api.WorkflowRegistrationServiceEJB_f4otyb_WorkflowRegistrationServiceRemoteImpl_WLSkel.invoke(Unknown Source)
[java] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
[java] at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
[java] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:523)
[java] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
[java] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
[java] at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:119)
[java] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
[java] at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
BUILD FAILEDFirst of all you have modifed OOTB approval flow, why you are not going for custom approval flow with skip rule.
Now
Are you able to compile the workflow?
before going to re - register follow proper steps.
Also check the below link
Metalink ID 1221305.1
Custom Auto Approval flowflow in OIM
Thanks,
Kuldeep -
Error while registering Oracle JDBC Diagnosability MBean
Hi All,
I get the following error (pasted at the end)when trying to use the OracleDriver class to create connections.
I am using JDeveloper11g-11.1.1.2.0, and
JDeveloper11g-11.1.1.2.0/wlserver_10.3/server/ext/jdbc/oracle/11g/ojdbc6.jar.
I read other posts with similar errors; the recommendation was to update the jar to the latest patch. But that still does not seem to work.
Any help/pointers appreciated.
Thanks
Meera
------------ Error trace ----------------------------------------------------
SEVERE: Error while registering Oracle JDBC Diagnosability MBean.
java.security.AccessControlException: access denied (javax.management.MBeanTrustPermission register)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:323)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:568)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.checkMBeanTrustPermission(DefaultMBeanServerInterceptor.java:1824)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:310)
at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
at oracle.jdbc.driver.OracleDriver.registerMBeans(OracleDriver.java:345)
at oracle.jdbc.driver.OracleDriver$1.run(OracleDriver.java:197)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jdbc.driver.OracleDriver.<clinit>(OracleDriver.java:193)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at oracle.communications.brm.pdc.server.transfomation.CrossReferenceDBConnectionObj.initializeConnection(Unknown Source)
at oracle.communications.brm.pdc.server.transfomation.CrossReferenceHandler.<init>(Unknown Source)
at oracle.communications.brm.pdc.server.transfomation.RRE_TransformationEngine.createWorkItemProcessors(Unknown Source)
at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testCreateWorkItemProcessors(Unknown Source)
at oracle.communications.brm.pdc.server.junit.RRE_TransformationEngineTests.testMain(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:20)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:73)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:46)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
at org.junit.runners.Suite.runChild(Suite.java:115)
at org.junit.runners.Suite.runChild(Suite.java:23)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:180)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:41)
at org.junit.runners.ParentRunner$1.evaluate(ParentRunner.java:173)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:28)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.ParentRunner.run(ParentRunner.java:220)
at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:421)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:912)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:766)Hi,
did you enable the permission at the jvm level?
its' done by adding the following lines to your java.policy file under <JRE_HOME>/lib/security
grant {
// JMX Java Management eXtensions
permission javax.management.MBeanTrustPermission "register";
ciao,
Giovanni
P.S. This solution was taken from http://forums.sun.com/thread.jspa?threadID=491124 -
Error while registering Oracle JDBC Diagnosability MBean - version 1.2.1
Hi,
I am running version 1.2.1 of SQL Developer (build MAIN-32.13). I have a local copy of Oracle 11g running on Windows XP. I am running version 1.6.0_03 of java.
When I fire it up, I get the following message in the "logging page - log" pane:
Source: oracle.jdbc.driver.OracleDriver
Message: Error while registering Oracle JDBC Diagnosability MBean.
Is this something I should worry about?
GrahamI got the same thing using SQLDeveloper shipped with 11g. It is every annoying since sqlplusw.exe is not available anymore, neither iSQLPLUS or SQLPLUS.exe is good enough all of the sudden that I found not much choice of accessing the database on windows ...
-
Error while registering for index relevant events: Invalid RID: No reposito
Hi,
I created an index and assigned a datasource to search the Windows network drive. I activated the index and now when I am monitoring the application log, I see the error <b>Error while registering for index relevant events: Invalid RID: No repository manager found for prefix: and XIndexing documents failed. AbstractTrexIndex: indexing some of the resources failed Continue crawling and Indexing document failed. Access denied </b> for the <b>IndexmanagementService</b>.
When I see the queue status, the queue status is always idle, even after I activate the queue.
In the indexing monitor, I see the error <b>Trex: Preparation failed: index operation</b>
could anyone tell me what could be wrong?
Thanks,Hi Christian,
thanks for your reply.
we are using 7.2 SP02. Do you think it could be the version that has some issues with custom mapping functions?
regards
Yao -
Error code -22: Error while registering
Hi Guys.
I'm new to NW Mobile 7.1.
I'm able to run developed applications and see data on physical devices (PDAs).
I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
After a sync, the folowing messages appear on my console:
Windows XP
messageReceived in ContainerSyncEventListener: Connected to the server Level: 1
messageReceived in ContainerSyncEventListener: Sending logon data to server Level: 1
messageReceived in ContainerSyncEventListener: Waiting for response from server Level: 1
messageReceived in ContainerSyncEventListener: Receiving data from server Level: 1
messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
In just a few words, it is driving me nuts.
Thank you in advance,
David.Hi,
if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
Hope this helps!
Regards,
Oliver -
Error while Registering the Database with Catalog..
I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog. -
Error while registering the Concurrent Program
Hi,
I am getting the following error while registering the concurrent program.
The executable is registered as shell script and this executable sends a mail with attachment. can any one of you tell me the cause of the error?
ORA-20160: ORACLE error -4091 in SUBMIT: others
Cause: SUBMIT: others failed due to ORA-04091: table APPLSYS.FND_CONCURRENT_PROGRAMS is mutating, trigger/function may not see it.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
ORA-06512: at "APPS.ALR_FND_CONCURRENT_PROGRAM_IAR", line 1
ORA-04088: error during execution of trigger 'APPS.ALR_FND_CONCURRENT_PROGRAM_IAR'
ORA-06512: at "APPS.FND_CONCURRENT_PROGRAMS_PKG", line 63
FRM-40735: ON-INSERT trigger raised unhandled exception ORA-20160.
Thanks in advanceCheck Note: 391795.1 - Frm-40735: On-Insert Trigger Raised Unhandled Exception Ora-04062 in APPS.FND_CONCURRENT_PROGRAMS_PKG
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=391795.1 -
Hi All,
When I am trying to sync my Mobile Client to the Middleware, I am getting this error:
ERROR: Error occured on server: "Error while Registering"; error Code 22
ERROR: Error occured on server: "Error while Registering"; error Code 22
<b>Syncronization Successful</b>
Can anybody suggest me why this is happening?
AnkurHi Ankur
Are you by any chance using Mobile 7.1 client? In that case this error occurs when you havent registered the client device before synchronizing. Registeration should be done in the Web Dynpro Portal available in the server and once you have successfully registered the device, sync from the client. This might solve the issue.
Best Regards
Sivakumar.
Maybe you are looking for
-
How do I install Lightroom 3 on my macbook pro that does not have a CD drive?
I bought Lightroom 3 years ago but my computer at that time did not possess the processing power. I just bought a macbook pro but it does not come with a CD drive.... how can I install it without going out an buying an external drive?
-
I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my
-
File Reciver adapter - Variable Substitution
Hi all, i am creating a file with dynamic file name. My structure looks like this: Row - 0-unbound (all the data) FileName - 1 I don't want the file name to appear in the file I just want it for the Variable Substitution. so in the content conversion
-
Document Upload in ADF protocol using Open script
Hi , My transaction is to upload a document into a portal. I have recorded this transaction in OPEN SCRIPT using ADF protcol. When i playback the script, it uploads a document with no contents in it. if i open the uploaded file it has only "Null". Th
-
HT1351 transfer my iTunes library from my iPhone 4 macBook Pro
I need to transfer my iTunes library including my playlists from my iPhone 4 to my new macBook Pro but so I can sync a new CD to my phone without losing all my existing songs and playlists. Any suggestions?