Error while Reimporting the table
Hi All,
I am getting the following error while reimporting the target table.
java.lang.NullPointerException.
Can anybody tell me the solution plz.
Regards,
Siva
This ussualy means that object with required ID is missing or OWB thinks it's missing. Try deleting it, and than do the import.
Similar Messages
-
Error While Activating the Table
i have created a table name ZEMPLOY11 in ABAP Dictionary containing fields Client [NUM] Carieer [NUM] Firstname [CHAR] and Surname [CHAR] and save it . when i activated this table it shows and error Mesage "Errors occurred during activation". kindly help me out
i have created few more tables and faceing the same problem
Regards
AmmadHi Ammad,
Could you please paste the error what you are getting so that we can help you in a bettre way, I think most probably you haven't assign a key variable while creating the table, so in the screen where you have mentioned the fiels Client NUM Carieer NUM Firstname CHAR and Surname CHAR ,mark client and carrioer as key fields, then try to activate it after setting the technical setting of the table.
Hope now you will able to activate your tables.
Pooja -
Error while dragging the table
Hi Folks,
I am getting the following error while dragging the model table on to the diagram tab(creating an interface).
Any Ideas??????
java.lang.NullPointerException
at oracle.odi.interfaces.interactive.support.clauseimporters.ClauseImporterDefault.importClauses(ClauseImporterDefault.java:87)
at oracle.odi.interfaces.interactive.support.actions.InterfaceActionAddSourceDataStore.performAction(InterfaceActionAddSourceDataStore.java:124)
at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:845)
at oracle.odi.interfaces.interactive.support.InteractiveInterfaceHelperWithActions.performAction(InteractiveInterfaceHelperWithActions.java:821)
at oracle.odi.ui.OdiSdkEntityFactory.dropSourceDataStore(OdiSdkEntityFactory.java:523)
at oracle.odi.ui.etlmodeler.diag.dragdrop.DiagramNodeDropHandler.dropObjects(DiagramNodeDropHandler.java:150)
at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.dropSelected(DelegateChooserDropHandler.java:386)
at oracle.modeler.dnd.ModelerTCDropHandler.access$001(ModelerTCDropHandler.java:69)
at oracle.modeler.dnd.ModelerTCDropHandler$3.run(ModelerTCDropHandler.java:288)
at oracle.modeler.dif.GraphicAdder.addImpl(GraphicAdder.java:387)
at oracle.modeler.dif.GraphicAdder.addAndLayoutImpl(GraphicAdder.java:372)
at oracle.modeler.dif.GraphicAdder.addSelectAndLayout(GraphicAdder.java:348)
at oracle.modeler.dnd.ModelerTCDropHandler.dropSelected(ModelerTCDropHandler.java:284)
at oracle.diagram.framework.dragdrop.handler.DelegateChooserDropHandler.drop(DelegateChooserDropHandler.java:150)
at oracle.diagram.framework.dragdrop.DefaultDropPlugin.drop(DefaultDropPlugin.java:115)
at oracle.modeler.dnd.ModelerDropPlugin.drop(ModelerDropPlugin.java:100)
at oracle.diagram.framework.dragdrop.DropTargetHelper.drop(DropTargetHelper.java:188)
at oracle.diagram.framework.dragdrop.ManagerViewDragAndDropController$MyDropTargetListener.drop(ManagerViewDragAndDropController.java:802)
at java.awt.dnd.DropTarget.drop(DropTarget.java:434)
at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTargetContextPeer.java:519)
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEvent(SunDropTargetContextPeer.java:832)
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(SunDropTargetContextPeer.java:756)
at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:30)
at java.awt.Component.dispatchEventImpl(Component.java:4508)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:4312)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4163)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4481)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:602)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:616)
at java.awt.EventQueue$2.run(EventQueue.java:614)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Thanks in advance
RDid you tryed to refresh your model or delete and re-import it ?
-
Ora-00604,ora-01422 error while dropping the table
Hi gurus,
I am using Oracle 10g R2 on windows 2000 platform,while dropping the table the following error occured.
ORA-00604 : error occurred at recursive sql level 1.
ORA-01422: exact fetch returns more than requested number of rows.
Need urgent help.
Thanks in advanceIs there an AFTER EVENT trigger defined on this database? Can you check that?
Secondly, was this database migrated from earlier version? I remember having seen this problem on 9i (it was 9.2.0.1 or 9.2.0.2; I can't recall exactly). -
Error while importing the tables from MySQL using the data source connection
Hi,
I am trying to import tables from MySQL into Powerpivot using the data source connection, if use the import using the Query option its working fine but not with the select list of table option.
when i click on the select list of tables option, i get the below error after selecting all the tables to be imported:
OLE DB or ODBC error.
An error occurred while processing table 'XXXXXXXXXX'.
The current operation was cancelled because another operation in the transaction failed.Hi Bharat17an,
Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
Regards,
Elvis Long
TechNet Community Support -
Error while finishing the Table Redefinition
Hi All ,
I am performing the Table Redefinition for one of my tables CSP_RESOURCE.
While performing the last step where we execute the finish_redef_table , I am getting the below error :-
SQL> exec dbms_redefinition.finish_redef_table('CSP','CSP_RESOURCE','CSP_RESOURCE_TEMP');
BEGIN dbms_redefinition.finish_redef_table('CSP','CSP_RESOURCE','CSP_RESOURCE_TEMP'); END;
ERROR at line 1:
ORA-42012: error occurred while completing the redefinition
ORA-00600: internal error code, arguments: [17182], [0x2AC81E4E19F0], [], [], [], [], [], [], [], []
ORA-06512: at "SYS.DBMS_REDEFINITION", line 82
ORA-06512: at "SYS.DBMS_REDEFINITION", line 1524
ORA-06512: at line 1
The same piece of code was running in Oracle 10g successfully but its giving the above error in Oracle 11G Release .
Could someone please let me know what could be the possible cause for that?Thanks a lot Damorgan.
i checked my version and i got the below result which suggests that I already have 11.2.03
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Could you please let me know how to raise a SR for Oracle Support Team? -
Unable to add Action for table - throwing Fatal error while rendering the table after adding
Hi,
I am not able to add action to the table i created.
when i click on events and then Create Action for "onFilter" event, it is giving me Internal Error. The message details is:
eclipse.buildId=@qualifier@
java.version=1.6.0_45
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en
Command-line arguments: -os win32 -ws win32 -arch x86 -data C:\NWDS\Workspace
Error
Thu Jul 17 11:17:27 IST 2014
Internal Error
Plug-In Name: Web Dynpro HTML Rendering
Internal Error : com.sap.ide.webdynpro.rendering.html
Class : com.sap.ide.webdynpro.viewdesigner.ur.RenderingService
Method : renderDelta
Message : java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
Exception : java.lang.RuntimeException: java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
[Error: com.sap.ide.tools.services.ui.dialog.DialogService Thread[main,6,main]]
The complete error details is also attached with the message.
After creating the action, the table looks like below:
Can someone help me on fixing this issue.
Thanks,
Abhishek.Its a rendering issue with the NWDS/IDE.
Try, close and re-open for fix it. If it still persists, uninstall NWDS and re-install the right version of NWDS w.r.t the Portal server.
Regards,
Sharath -
Facing a problem with RFC Call receiver error while importing the table sap sandbox
Hi All,
I am trying to import a table from sap sand box . while importing it is showing below error..
RFC CallReceive error <Function DDIF_FIELDINFO_GET: RFC_ABAP_EXCEPTION-(Exception_Key: NOT_FOUND, No active nametab exists for /BIC/OHZ_ISP_SCX)[SAP NWRFC 720][SAP Partner 731 ][SCX][ics106046124][APOBODS][4103]>.
Please suggest me how can i overcome this problem ??Hi Kishore,
Can you quickly check with your SAP Basis Team whether they have installed necessary functions related to BODS on the SAP Application server.
Please check Supplement for SAP Guide
Regards
Arun Sasi -
Hi
Please let me know reasons for this below error
Error starting at line 32 in command:
ALTER
TABLE DEVELOPMENT.BRANDING_STRINGS
ADD
CONSTRAINT frk_strings_brandingsdetails
FOREIGN KEY (CUSTOMIZATION_ID)
REFERENCES BRANDING_DETAILS (CUSTOMIZATION_ID)
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list
02270. 00000 - "no matching unique or primary key for this column-list"
*Cause: A REFERENCES clause in a CREATE/ALTER TABLE statement
gives a column-list for which there is no matching unique or primary
key constraint in the referenced table.
*Action: Find the correct column names using the ALL_CONS_COLUMNS
catalog viewRaunaq wrote:
The last thing it needs is people begging to gain points for themselves so that they can boost their ego by trying to reach "Guru" status to impress their friends
What are you ?
How can you make out that i am doing this to impress my friends?
What you could have simply done is that you should have told me that don't ask for point ? You can use better and decent english.
And how can you image anybody is interested in your long lectures ?? Still
Purvesh was quoting from the forum FAQ: Re: 13. How do I answer a question on the forums?
It is not acceptable to ask for points for your answers. The site admiinistrators have expressed that this is not acceptable behaviour. Such posts can be deleted or edited and continued breach of this could result in termination of your account.
As such, your post is now going to be edited to remove your begging for points. -
Error while executing the table statistics using Brtools
Dear Team,
We are getting ORA-01031: insufficient privileges error whenever we have tried to execute the update or table statistics using brtools on our SAP development server. I have checked the permissions of sapcheck directory and changed it to 775 still error remains the same. I have observed, it is failing to create the sta or chk files in sapcheck directory after executing update statistics using Brtools.
BR0291I BRCONNECT will be started with options '-p initDEV.sap -l E -f stats -t "USTUD" -p 1'
BR0280I BRTOOLS time stamp: 2010-07-20 12.02.33
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2010-07-20 12.02.34
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0801I BRCONNECT 6.40 (50)
BR0280I BRCONNECT time stamp: 2010-07-20 12.02.42
BR0301E SQL error -1031 at location BrLicCheck-12
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: cedsegpe.log 2010-07-20 12.02.42
BR0280I BRCONNECT time stamp: 2010-07-20 12.02.42
BR0804I BRCONNECT terminated with errors
I have checked the owner for SAPUSER table and it is showing as OPS$DEVADM
Please, advise me on the same.
Thanks and Regards,
KedarDear All,
Thanks for your responses.
Permissions are set as below for br* files.
sap-dev:devadm 23> ls -ltr br*
-rwxrwxr-x 1 oradev sapsys 3437688 Oct 31 2008 brarchive
-rwxrwxr-x 1 oradev sapsys 3547760 Oct 31 2008 brbackup
-rwxrwxr-x 1 oradev sapsys 4632408 Oct 31 2008 brconnect
-rwxrwxr-x 1 devadm sapsys 3850224 Oct 31 2008 brrecover
-rwxrwxr-x 1 devadm sapsys 1480656 Oct 31 2008 brrestore
-rwxrwxr-x 1 devadm sapsys 4837672 Oct 31 2008 brspace
-rwxrwxr-x 1 oradev sapsys 2175208 Oct 31 2008 brtools
I guess it is fine because with these set of permissions, it is working absolutely fine in my quality system.
QAS Permissions are as belows for your information
sap-qas:qa1adm 22> ls -ltr br*
-rwsrwxr-x 1 oraqa1 sapsys 3437688 Oct 31 2008 brarchive
-rwsrwxr-x 1 oraqa1 sapsys 3547760 Oct 31 2008 brbackup
-rwsrwxr-x 1 oraqa1 sapsys 4632408 Oct 31 2008 brconnect
-rwxrwxr-x 1 qa1adm sapsys 3850224 Oct 31 2008 brrecover
-rwxrwxr-x 1 qa1adm sapsys 1480656 Oct 31 2008 brrestore
-rwxrwxr-x 1 qa1adm sapsys 4837672 Oct 31 2008 brspace
-rwsrwxr-x 1 oraqa1 sapsys 2175208 Oct 31 2008 brtools
So do you feel still it has something to do with permissions?
Thanks and Regards,
Kedar -
Error while creating the table
ORA-01658: unable to create INITIAL extent for segment in tablespace APPS_TS_TX_DATA
Ora-code.com is a very useful site and faster even than using the docs.
"ORA-01658: unable to create INITIAL extent for segment in tablespace string
Cause: Failed to find sufficient contiguous space to allocate INITIAL extent for segment being created.
Action: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller value for INITIAL"
Cheers, APC -
Error while creating the DWH tables using DAC
Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RMThe fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy. -
No data Exists error while retrieving the data from a table
Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding thisHi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake.... -
Error while deriving the currency from table
i am getting the below error while simulating the payroll for india.
Error while deriving the currency from table T001P & Error during Initialization of payroll.
i am SAP HCM Trainee.. practicing at home.Pls check the currency in table T500C.
You can use TCode OE00 for table maintenance T500C.
Also check whether currency is there in table V_CURC and T510.
Hope this will help.
Regards
Ghouse -
Error while filling the set up table for 2LIS_11_VAITM
Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)
Maybe you are looking for
-
TS3148 my computer has a lighting bolt and a hazard symbol on it and will not run anything
Can someone help me know what to do in this situation. My computer has a lightining bolt and a hazard s ymbol on a grey screen and it will not reboot or do anything
-
Hello, I'm currently developing a GUI Java application and trying to allow access to as many users with as many OS systems as possible. So far, only Mac systems cannot run my applet and through the process of finding out what was the reason, it seems
-
Can I download a 64-bit version?
Greetings, Is there a 64-bit version that I can download? Thanks, Shane.
-
Creating purchase order through coding
I am trying to create purchase order through Code, for a table field i can insert as : odocs = GOD_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseOrders) odocs.CardCode = "200173" But if the field is not a table field then , how can i in
-
Test Web Services with X509 Certificate
Hello, We'd like to perform a test of our web services with an X509 Certificate. I have been using SOAPSonar to do my test up to this point. But the version I have will not allow me to test with a certificate. It appears I will need to purchase th