Error While Releasing the Billing Doc to Accounting.

Hi All,
When I am Releasing the Billing Document to Accounting the Value of JIN2 Condition Type is not getting released to Accounting. It is giving the Following Error.FI/CO Interface : Balance in Transaction Currency. I have all maintained the Account Determination. But Still I am facing the same problem.
Please suggest any Solution.
Thanks,
Prashant.

Hi Prashant,
Please check the following function in transaction SE37
(here you could check if the functions enhancement is in any project and
also if the function is active): EXIT_SAPLV60B_001 - 011.
Using transaction CMOD you could take a look at user exits that are
active in your system. Please de-active projects in particular relating
to the billing process than check whether the error resists.
Also check to make sure that there is not an unused user exit active.
Regarding to use exits created data inconsistencies please find the
attached note:
160211 Usage of USER_EXIT creates data inconsistency
Please also find the note
48431 Unused user exit runs
how to check if a user exit is active.
The list of user exits with specifications please find in the following
note: 301077 User exits for the interface to accounting
If these notes are not helpful please check another possible cause of
error F5702. Sometimes this error is triggered when the net value is
changed in pricing (userexit, own routine or formula). Please check also this
possible reason.
Cheers,
Alex

Similar Messages

Vf02 error while releasing a billing doc to accounting

Hello All,
I m getting the below mentioned error while releasing a billing doc for a accouting.
I have checked all the settings in vkoa , ob52 and many more and all are set properly, now m not able to track where actually the prob is.
error is: No account is specified in item 0000001004
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000001004" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000001004" of the FI/CO document.
Points wil be rewarded
Thanks,
SUnny

Hi,
Have you checked what is the determination account determination log ? You can do this by entering in VF02 and select from the menu Environment -> Account Determination Analisys -> Revenue Accounts.
In this log you can see what are posting keys determined from the pricing procedure that should be posted in the FI document and determine very easy in which step the account was not determined.
After that you can maintain the correct account in VKOA transaction.
BR,
Valentin

Error while releasing the billing document to accounting

Dear All,
I need your favor to resolve the below issue:
(System SAP SAP ECC 6.0)
User is getting the below error message while releasing the billing document to accounting in VF02:
This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
"Consolidated companies 151 and 186 are different
Message no. F5080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
Thanks in advance,
Praveen

Hi Murali,
Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
Thanks,
Praveen

Error While Releasing the Billing Document Msg No. KE/AD 243

I am getting error while releasing the billing document
Error No KE/AD 243
This error comes in particular billing document only others are posted correctly.
Rgds
Dhiraj

Dear Anil
We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
Rgds
Dhiraj

Error while releasing the Billing document

Hi Everyone,
Encountering an error with the description 'Balance in Transaction currency' while trying to release the Billing document from VF02 transaction, still didnt come across the right oss note that can remove this error, can any one give me a clue on this,
Rgds,

hi,
We are facing similar problem, when releasing the billing document to accounting.
Have you been able to find the solution to this problem. If so, kindly suggest the answer
Thanks
Dinesh

Error when releasing the Billing Doc to FI

Dear All,
When i tried to release the billing document to accounts, i'm getting an error saying
*Item category 03000 not allowed in accounting transaction 0200/0001*
Please help me to solve this...
Thanks
Uwanthi

Dear Uwanthi,
Try this:
IMG - Financial Accounting (New) - General Ledger Accounting (New) - Business Transactions - Document Splitting - Classify Document Types for Document Splitting -
Here check whether your Transaction Type is assigned with relevant variant.
Also in the same menu path check - Classify G/L Accounts for Document Splitting
Hope this helps...
Thanks,
Jignesh Mehta

Account is blocked for posting, while releasing the billing doc to FI

Hi,
While releasing the document to FI, I am getting the error Account is blocked for posting .
The GL account does not contain any entry for that company code. What can be the reason of this error?
Regards
Rudra

HI,
It might sound bit different to you...................even then hava look at the following settings
Transaction Code VKOA - Check the GL Account , the system is determining on the basis of Access Sequence.
Transaction Code FS00 - Check whether the GL Account is blocked for posting or not.
Regards
Jaydip

Tax code error while releasing a billing document to accounting in VF02

Hi SAP Gurus,
While trying to release a billing document to accounting, the following error is displayed
" Tax Statement Item Missing for Tax Code TA".
Message number: FF805.
Please provide your valuable inputs to overcome this issue.
Suitable points shall be rewarded.
Thanks and Regards,
Sreeni.

Check your pricing procedure. One of the Tax relevant items is ending up with a base value of Zero.
This is easy to check if you double-click on tax related Pricing Conditions, you will find one of them with a base value is zero.
If not, it could be something more simpler, like GL Account master data. Make sure the "Post without tax allowed" box is checked and ensure the tax category is masked ("*").
Hope this helps.
Cheers.

While releasing the billing document to accounting

Dear Guru,
We are into rollout project . New condition types are defined by the SD Consultant and account key is defined but while i m releasing to accounting i mgetting the following error
[No account was specified for account type "S" in item "0000001003" of the FI/CO document.
i v checked the account determination analysis i m getting the Gl account depend upon the conditions
Thanks & Advance
Laxmi

Hi,
Try not to repeat your questions.
Check the properties of the GL account and field account type.
Ask your FI consultant he will do the rest.
Tcode FS00.
Reward points if useful
Regards,
Amrish Purohit

Error while releasing a billing document to accounting.

Hi Guys,
I have a billing document and i am trying to release it to accounting but we are not able to do it. We are getting an error
System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function builder TAX2
Message no. FF769
We are on SAP ECC 6.0.
any idea how to resolve this issue? I have looked into many OSS notes but was not able to find anything close.
Cheers
VJ

Hi Vijayendra,
Were you able to solve this issue? We have the same thing happening and was wondering if you could help me here.
Thanks.
regards,
Raj

While releasing the billing document error

Dear TEAM,
While releasing the billing document system was showing the message like NO STANDARD COST ESTIMATE COULDBE FOUND FORTHE MATERIAL.
I have suggested to the user to release the price through ck24.At that time system is showing the message like cost has not been created for the inhouse production.
The samething was tested in Qualiy server and the transaction was through.I have not done any price release for the samematerial.I have checked the table under VBAP the documents was made against to the samematerial.That time we have not faced any issues like this.
Note:Material ledger concept using by client.
Please kindly advice how to proceed further.
Regards,
Suma

have you checked in ck13n if there is a standard cost estimate for the material and what status it has, if there is one? Also, what are the dates in that cost estimate? How do they compare to the date of the billing document? What does the customizing say about the selection of cost estimates for valuation of SD documents? SPRO>Controlling>profitability analysis>master data->valuation-->Set up valuation using material cost estimates
Nikolas

Error During Releasing of Billing Document to Accounts Department

Hi,
Kindly help me, we have just finished the upgradation from 4.6 version to 6 version. when we are releasing the billing document to accounts department error message is coming like this.
No entry has been made in the assignment table for condition type P001.
I verified this one through KE41 transaction, as already maintained the combination of condition type and value field both options (tick and untick of transfer +/-).
Billing type is ZIV.we are getting this error message only for this billing type.
kindly suggest me any SPA notes required to be implemented in order to release the same.
Regards,
Vasu S

hi,
once your order is created and also delivery, there is no problem in the data of the material.
the only possibility is that you must have skipped the post goods issue step or if PGI is mandatory for delivery creation then there must not be appropriate stock for that item.
you can check the stock of that particular material in the specific plant by t.code MMBE.
regards,
Siddharth.

Error while releasing the custom table

Hi Everyone,
Modified the User defined include files of a particular table for one of our requirements ( In the function group of the table maintenance generator ) and encountered an error while releasing the request to Quality server, the error disappeared after regenerating the table, this seem to be happening only when the user includes of a table maintenance is introduced/modified, why the release doesnt work when there is any change in the maintenance generator?,
Rgds,

Hi Sailatha,
After modifying, you need to re-generate everything so that, the changes come in effect.
Trying to release without re-generating will surely result in error.
Regards,
Raj

Getting error Vf5702 while relesing the billing doc

While releasing a billing document getting the following error:
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'NOK' with the following
     details:
     Exchange rate '00', amount ' 12.631,25-' and currency key 'NOK'.
    The data in the transaction currency were transferred from the calling
    application.
     System Response
    Your data cannot be processed in FI.
Thanks.

The said error would come (probability 99%) generally if you have CIN. Anyway, please check this thread whether it will be helpful to you
[Balance in transaction currency   |Re: VF02 error- Balance in transaction currency]
You also ensure with your basis team that your system is uploaded with latest patch updation.
thanks
G. Lakshmipathi

Error while releasing the TR

hi All,
We are facing an issue while releasing the Transport Request. The error is "No valid TM target found".
Request your valuable inputs on this.
thanks in advance
With Regards,
Lata

Hi,
is it possible for you to import request manualy on OS level. once request created, it will split up in two files, one is R & second is K, import that files manualy in usr/sap/trans/data and usr/sap/trans/cofiles directories respectively and tp import request no. client no. or you can login to the target system client 000 by using stms ->import queue--> clieck on request and import it.
The error actualy you have given is related to your target system, the request is not able to find out or got the target system.
Regards,
kiron.

Error While Releasing the Billing Doc to Accounting.

Similar Messages

Maybe you are looking for