Error while replicating employees from R/3 to CRM. BP no. are not created
CRM Experts,
Request your help in solving the following issue.
While replicating the employee information from R/3 to CRM, we get the following error message in the IDoc details.
<b>Message:</b>
IDoc: 0000000000057590 Status: IDoc ready to be transferred to application
<b>Immediately processing not possible: Screen output without connection to user.</b>
Steps:
1. Using PFAL TCode, we push the details of "Persons" from R/3 to the CRM client.
2. After pushing the details, come to CRM and see the IDoc details. We get the above mentioned error message.
3. The BP number is not getting generated.
Really appreciate your solutions/suggestions/clues.
Thanks in advance,
Vijay
Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin
Similar Messages
-
Error while Replicating Objects from R/3 to CRM
Hi,
While replicating objects from R/3 to CRM (Tcode :R3AS), the status of the object is still running. When I checked in Outbound queue (Tcode:SMQ1) the status is 'SYSFAIL', when I double clicked it says "Password logon no longer possible - too many attempts". So what is the solution to it...
I am working on CRM 5.0
Regards,
vimalDear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin -
Error while replicating data from MSSQL to HANA
Hello Colleagues,
I have created SLT configuration where the replication has to happen from MSSQL database for NW BPM for 4 tables. I have also applied a transformation function to convert date columns in the BPM tables to right desired format while replicating in HANA.
Now when I use the SAP HANA Data Provisioning Editor to replicate the data from these BPM tables, I am getting following error :
Conv.obj. Z_BC_BPEM_EL_RDS_021: Calculation job in sender system could not be started
In the configuration I have used Job Options as No of data Transfers Job : 003 , Initial Load Jobs : 002 , No of Calculations Job : 001
We are using SLT 2.0 and BASIS release 740.
Please suggest what could be done to remove that.
Regards,
ArchanaArchana
There could be number of reasons for this issue. We need to first start filtering one by one and take out the possibility. Please check the things in the following order.
1. As everyone mentioned, check if you have free available WPs. System is going to use Background WP for running calculation job in the Source system. Normally Basis define sufficient number of WPs but sometimes they are occupied. You can check using TCode SM50 ( you need to do that on each host in a multi App server environment ).
2. Try increasing your calculation jobs in SLT using TCODE LTRC --> Administration Data --> Change no of Jobs. Make sure you have enough free background WP in your SLT and Source system.
Incase the above methods do not work, provide the following information.
1. Where exactly you see the error message. Are you able to add the table to Data provisioning from LTRC.
2. Are you able to add any more tables and do the replication.
Mahesh Shetty -
Error in SMW01for BP while replicating data from R/3 to CRM
Hi Experts,
While doing initial load for Customers from R/3 to CRM am getting errors as "Customer number already assigned to business partner" in SMW01 error message
Can anyone please help me on this.....
Regards,
RahulHi Rahul
As stated above this will happen in case the number is already assigned to a business partner.
Are you
1. <u>Reconnecting</u> the CRM system to a new R/3 and the CRM system has data from an old system?
2. Has the replication been done before
3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
Rewards points if this was helpful. -
Error while downloading Contacts from R/3 to CRM system
Hi All,
I am trying to download Contacts from R/3 to CRM system.
Through Initial Download. For this i have set filters through Tcode: R3AC1
as on KNVP and KNVV for the field VKORG.
As we have our requirement to download contacts based on or differentiating
on 'Sales Org".
We have downloaded our Accounts properly without any errors.
But for Contacts we are facing issues such as one or more extra
relationships are getting created between Contacts and Accounts other than
its original Contacts.
Means already existing contacts are creating more relationships after
download.
But a unique feature is visible for all, All those with false
contact-account relationships.
Contact has field value for 'Address type' missing while the same address
type field is properly added for correct relationships. ( please find attached the screenshot of the same)
Any pointers in which direction we should proceed for the solution would be
appreciated.
Thanks in advance.
Cheers,
SharadDear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin -
Errors while replicating Materials from ECC to SRM
Hi All,
I am trying to replicate materials from R/3 to SRM, in SMQ2 of SRM, the status of MATERIAL is still in yellow colour. when i checked in SMW01 tcode, the error is "Category for material group 013 does not exist" where as in R/3 also we dont have any material group as 013.
All the Prod type & Prod category have been replicated into SRM from R/3.
And no materials have copied in SRM.
how to resolve this ?
regds,
CB
Edited by: Channabasappa.K on Feb 17, 2011 10:30 AMHi,
DNL_CUST_PROD0 & DNL_CUST_PROD1 were in green colour now,
DNL_CUST_BASIS3 is in yellow colour & i saw in some doc that DNL_CUST_BASIS3 is not reqd from SRM7.0 onwards.
when i try to replicate MATERIAL, in SMQ2 i am getting status as SYSFAIL & after double clicking on that i got a pop up as "Error in Mapping (Details: transaction SMW01)"
Upon checking in SMW01 i got the above errors as
" Category for material group 013 does not exist
Message no. COM_PRODUCT_API002
Diagnosis
If material groups are used in the SAP system, they must exist as categories in CRM/EBP before you import materials. When Customizing object DNL_CUST_PROD1 is imported, the material groups are imported automatically and created in the category hierarchy R3MATCLASS (material group).
Procedure
Check whether the material groups have been imported successfully and exist as categories.
Proceed
If necessary, import the Customizing object DNL_CUST_PROD1"
Like this its showing 19 material groups and all these 19 mat groups were not present in ECC.
Regds,
CB -
Error while Replicating Datasource from R/3
In R/3 extraction, after activating the datasource in R/3 and replicating the datasource in BI, I received an error saying that 'SQL error occured when accessing a table' with Message no. RSAR051... Help me in this.
I checked in ST22. But there is no problem in it. Pls give me the solution..
-
Region Code Error while replicating locations from backend.
Hi,
While executing the program BBP_GET_LOCATIONS_ALL we got error as region XX not defined for country IN (India). This error is for all regions in the log.
We suppose this was because the standard regions codes(States) in ECC backend and SRM are mismatch. For eg. Region Code for Maharashtra is "13" in SRM whereas it is "MAH" in ECC.
Is our assumption correct. What could be the possible solution to resolve this issue?
Immediate responce will be higly appreciated.
Thanks
HussainHi. Just change the config in SRM to match ECC.
It is almost the same IMG path in the 2 systems.
In SRM it is SAP Web Application Server > General Settings > Set Countries > Insert Regions.
You can also set up a distribution model to automatically syncronise the config or you could go to Utilities > Comparison in the config in SRM then select your ECC system as the logical destination and it will syncronise as a one off for you.
Regards,
Dave. -
Error while selecting date from external table
Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2 SE_CUST_ID NUMBER(38),
3 SE_TRAN_AMT_LCY FLOAT(126),
4 SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6 TYPE ORACLE_LOADER
7 DEFAULT DIRECTORY ext_tables
8 ACCESS PARAMETERS (
9 RECORDS DELIMITED BY NEWLINE
10 FIELDS TERMINATED BY ','
11 MISSING FIELD VALUES ARE NULL
12 (
13 country_code CHAR(5),
14 country_name CHAR(50),
15 country_language CHAR(50)
16 )
17 )
18 LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell -- -
Error while updating data from PSA to ODS
Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Failed to commit objects to server. Error while publishing reports from BW
Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-) -
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
I got new Apple TV 10 days back,its not asking for the WIFI password.Home sharing is not working,i am getting Error while streaming videos from Youtube.
I can only see pics and video saved in my iphone. No other options are working.The worst part is that its not asking wifi passoword.
Not able to connect istores and itunes.
I cannot do software update. Can anyone help in this content?Thanks Brian- I am not connecting it with iphone teethering. I am using it with my DSL wifi.
I am using it with ethernet cable then its working fine.If i am trying to use it with WIFI then its giving error.
I tried using Netwrok testing but its giving same error. -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea?
Maybe you are looking for
-
What is the best way to double buffer in this case and how to do it....
currently I have public class Frame1 extends JFrame{ //inside this class I call up circle class, rectangle class, etc.... to draw }I am making a "paint" program, and I have individual classes to handle the paint methods heres an example: abstract pub
-
How do I take away a unit/number that I have linked to my Apple ID?
I have let my brother link his mobile number to my Apple ID, however, now all of his text messages that are sent and received as iMessage get on my phone as well. So I want to take away his device/number that is linked to my Apple ID and have him cre
-
DTW General Entry (Goods Receipt) with Serial numbers
Hi all, I want to import 540 items with serial numbers using the General Entry templates. Some items have as many as 200 serial numbers. Total number of serial numbers for 540 items are about 24,000. In the Serial Numbers template, will I have to cov
-
PDF signature timestamp problem
Hi, sorry if this post is slightly offtopic. We are trying to sign and timestamp pdf documents in java (using Apache PDFBox) and we are stuck with a problem for more than a week. The signature itself is good, Adobe Reader can validate it succesfully
-
How to programatically convert XDP form into Dynamic PDF form
Hi, Is there a way to programatically convert XDP form into Dynamic PDF form using LiveCycle Service APIs? Thanks, lcfun