Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Similar Messages

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while activating the data source.

Dear all,
We are using the BI version 7.00 - i have a problem i.e., while creating the infopackage for the data source
0PM_OM_OPA_2 the following error is displayed.
"No active transfer rule for DS 0PM_OM_OPA_2 and ....source system CLNTDEV400; create first..."
Moreover the data source is found to be in version "M" - while activating the same when in click on the display/change icon , the following error is popped up.
"You can only edit 3.x DataSources using transfer rule
maintenance Do you want to create the transfer rules now?"
What could be the reason for this error. What are the things that are to be done to replicate the data and pull data?
Valid experts comment is expected in this regard.
Regards,
M.M

Hi Magesh,
Replicate your data source in BW and then right click onit and choose Assign Info source, it may take you to BC wherein you may need to install the Transfer Rules and related info objects etc.... Once you maintain this data source in the source system then you can create an info pack withput any extra effort.
Hope it helps..

Error while tansporting the Data Source & Transformation

Dear Experts,
I stuck in one problem. I just tried to transport one data source & its transformation fron BWD to BWQ. After importing the request, it throws an error (mentioned below):
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Password logon no longer possible - too many failed attempts
Error when activating DataSource ZMAT_MAPVL RQ1CLNT400
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS ZMAT_MAPVL RQ1CLNT400 does not exist
Also i check the same data source on R/3 system where it is available in activated form. I also replicate the same & tried to transport it again on BWQ but still the same.
Please help me out.
Thanks in advance
Neha

Hi,
Did you check the 'Conversion of logical system names' option?, whether your source is mapped to correct R3 system?. If not please check and map with the correct R/3 Quality system and sometimes there may be more than one R/3 system connected to quality, if so remove the wrong one.
For Password logon no longer possible, please check your RFC connection(SM59) by selecting the option Remote logon, it shd give you the error. As background user got locked it seems. Please check.
Thanks,
V.Senthil
Edited by: Senthilkumar Viswanathan on May 10, 2011 7:21 AM

Error while creating the data source

hi
iam creating generic data source using function module.
i inserted the function module and structure name,
when i press the save button, it is throwingerror message as Units field WAERS for field ANSWT of DataSource ZEQUIP_DS is hidden.
please guide me how can i overcome this
treat this is as urjent requirement
regards
kumar

The error message is explicit the WAERS field is hidden...you must edit the datasource structure in RSO2 and uncheck the "hidden" checkbox for that field....
It will solve your problem...
Regards

Error while changing the data source at runtime

Hi All,
I want to change the DB connection(from Dev to QA) in the code before viewing it to the user. I browsed through the samples and found a code. But when I', trying to use the code, I'm getting the following error.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKLogonException: Logon Error: invalid arguments in call---- Error code:-2147217393 Error code name:dbLogonFailed
The following is the code:(Bold - problem area)
private static void switch_tables(DatabaseController databaseController) throws ReportSDKException {
final String DBUSERNAME = "irs_tin";
final String DBPASSWORD = "monica30";
final String SERVERNAME = "n3qvdb999.1dc.com";
final String CONNECTION_STRING = "Use JDBC=b(true);Connection URL=s(oracle.jdbc.OracleDriver://n3qvdb999.1dc.com:1631);" +
                                                   "Database Class Name=s(oracle.jdbc.OracleDriver);Server=s(n3qvdb999.1dc.com);" +
                                                   "User ID=s(irs_tin);Password=;Database=s(IRSQA);Trusted_Connection=b(false);" +
                                                   "JDBC Connection String=s(!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;" +
                                                   "DatabaseName={database};user=;password=!)";
final String DATABASE_NAME = "IRSQA";
          final String URI = "!oracle.jdbc.OracleDriver!jdbc:oracle:thin://n3qvdb999.1dc.com:1631;DatabaseName=;user=;password=!";
          final String DATABASE_DLL = "crdb_jdbc.dll";
          Tables tables = databaseController.getDatabase().getTables();
for (int i = 0; i < tables.size(); i++) {
ITable table = tables.getTable(i);
               //Keep existing name and alias.
               table.setName(table.getName());
               table.setAlias(table.getAlias());
IConnectionInfo connectionInfo = table.getConnectionInfo();
PropertyBag propertyBag = new PropertyBag();
propertyBag.put("Trusted_Connection", "false");
               propertyBag.put("Server Name", SERVERNAME); //Optional property.
               propertyBag.put("Connection String", CONNECTION_STRING);
               propertyBag.put("Database Name", DATABASE_NAME);
               propertyBag.put("Server Type", "JDBC (JNDI)");
               propertyBag.put("URI", URI);
               propertyBag.put("Use JDBC", "true");
               propertyBag.put("Database DLL", DATABASE_DLL);
               connectionInfo.setUserName(DBUSERNAME);
               connectionInfo.setPassword(DBPASSWORD);
               connectionInfo.setKind(ConnectionInfoKind.SQL);table.setConnectionInfo(connectionInfo);
databaseController.setTableLocation(table, tables.getTable(i));
Thanks for your time.

Hi Guys,
I managed to fix my problem.
I have used the method in the utility class at this location:
http://code.google.com/p/struts2demos/source/browse/trunk/Struts_Demo_ThirdDemo/src/com/businessobjects/samples/JRCHelperSample.java?r=4
-Anil

While creating the Data source for Sql server am getting this error?

Hi i new to Power BI sites and office 365,
For my first step
1. i have successful creaeted Gateway in Office 365
2.Now i have creating the Data source for that gateway using Sql server R2
3.While Creating the Data source using the Corresponding gateway i have given and next phase set Credentials phase i have noticed one pop up window and it will shows me like
Data source Settings and below in that window it will show's u the things like
Datasource Name.
Loading......
Credentials type:
Privacy Level:
Failed to verify parameter
I will get this results finally ,so hw should i achive this probelm ,Please let me know if any one knows
So kindly give me the proper answer for this.
Regards

Any suggestions for Chinnarianu?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Error in replicating FI data source(0FI_AP_1) in BI system

Hi all
actually i am getting an error while replicating the FI data source(0FI_AP_1) in BI system. Error is "0FI_AP_1 Could Not be Replicated Do you want to delete this DataSource (with Mappings, Transfer Rules, InfoPackages)? ". This is the every first time i am doing the FI report, SO i think i have missed some steps of activating or some thing else. Plz advise.

Hi Srinivas thanks for the reply....as you told i have activated the DS 0FI_AP_6 in R3 and then when i went to replicate the same DS in BI it is showing the same message as written above ..... But still i can see the FI data source in my BI system but cant replicate any of them. so plz advise
Edited by: chaitanya.singh on Sep 4, 2010 2:00 PM
Edited by: chaitanya.singh on Sep 4, 2010 2:00 PM

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Language error while loading master data source for text

Hi,
We are getting the following error while loading the data in 0DISTR_CHAN_TEXT data source.
"Error during multibyte alignment for language D (position 2)".
Can we filter the data on the Language ( ='EN'). At the data source level LANGU field is marked for selection but still it is not available as filter at info package level.
Thanks
VV

Hey Vishal,
If the field is marked for Selection at data source level, then it must be available for selection in infopackage.
Try checking in RSA3 and see if it is available for selection over there. Let us know what was the output in R/3.
Regards,
Anjum.

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Error While Transporting export Data Source

Hi Experts,
We have a requirement to transport a data source from development to quality system through acceptance box.
We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
Please suggest how to get these 2 fields in acceptance box.
Thanks,
Sachin Motgi

Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Error while Replicating the Data Source in Quality System....

Similar Messages

Maybe you are looking for