Error while report conversion (URGENT, PLEASE!!!)

Hi, everyone
I am converting Reports from 1.0 version to Developer 2000. I
issue this statement:
rwcon60.exe userid=als/ur2nice@sefindv stype=rexfile
source=rep_describe_tables.rex dtype=rdffile dest=xx.rdf
overwrite=yes
and get back:
REP-3300: Fatal error in the object store
ROS--29: Error while opening or saving a document.
I also appreciate any information on where I can find
documentation related to the issue.
Thanks a lot in advance,
Eduardo

hello,
you might want to consult the documentation/release notes. it is
most likely, that direct migration between those two versions is
not supported.
regards,
the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                   

Similar Messages

  • Error while using XML Iview, please contact your system administrator.

    Hello everybody,
    I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
        Area           Version
        J2EE Engine    6.40 PatchLevel 98256.313
        Portal         6.0.14.0.0
    , can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
    Thanks in advance,
    Regards,
    Sarabjeet.

    Hi Sarabjeet,
    The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
    And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
    The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
    I will check if I can find out any more specific info.
    Daniel

  • HT1222 What do I do if it says "there is an error while updating." Help please and thank you

    What do I do if it says "there is an error while updating." Help please and thank you

    Maybe this will help you; https://discussions.apple.com/docs/DOC-3551

  • UCCE / IPIVR : Error while uploading file. Please try again later.

    IPIVR version 8.5x
    Receive "Error while uploading file. Please try again later" 
    Renamed the script to a different name and still could not upload.   I am able to upload other scripts without any issue.   I did find the ICM subsystem in partial service.   If that was the issue I would think it would cause an issue with all the scripts.   The script does validate.   Not sure why at this point.

    Hi Aditya,
    Are you using  SharePoint 2010 or SharePoint 2013?
    Did this issue occur for all users or the special user?
    Please go to Central Administration->Manage service applications->User Profile service application->manage user profile, search and edit the user profile, then upload a picture for the user, compare the result.
    In addition, please check the log file to check more information about this issue.
    The path of the log file is:
    SharePoint 2010: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\LOGS
    SharePoint 2013: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Error while report execution

    Hi,
    We are getting the following error while running of the Query '0PA_C01_Q014'.
    Error Meassage: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    System Error in Program SAPLRRI2 and from REP_ASSIGN_INITIAL_0PT-01-
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not permitted.
    Please if any one has faced this error previously help us in reloving the same.
    Full points will be awarded.
    Regards
    Niren

    >
    Senthilkumar Palanivelu wrote:
    > Hi,
    >
    > Pls check you Infoprovider whether load is proper or not. sometimes it may happen due to infoprovider inconsistencies.
    >
    > Regards,
    > Senthil
    Hi Senthil,
    Thanks a lot for your responce. But the Other reports based on the same info provider are working fine.
    Regards
    Niren.

  • Java iView Runtime Error While Report

    Hi,
    I am Angeline, I having some problem when I click Export to Excel from web-reporting... under NW 2004s, BI 7.0 Windows 2003 server all updated JDK, JRE, Framworks
    Report shows in Potals but when I click on Export to Excel It does blow errors:
    Remember Report has more then 80000 Records
    Error:
    JAVA iView Runtime
    Copyright 2002 SAP A.G. All rights reserved
    An exception occured while processing your request.
    If this situation presist, please contact your system administrator
    I tried to clear cache, but there is not option to clear cache, so I restart server, I have 12GB memory in PRD server, I treid increase memory xxMaxSize 2GB, and J2EE Engine is running fine... check user authroziation works fine...
    Please help me where is that problem, Remember Repoarts has more then 4000 records
    Thanks in Advanced
    Edited by: T A on Sep 1, 2009 7:06 PM

    Problem Solved by myself
    Just incr. Heap memory now its ok

  • JBO-26061, Error while opening JDBC connection, please help

    Hello
    I am new to JDeveloper suite.
    I tried to follow BC4J/JSP tutorial found in "JDeveloper Handbook" but every time I try to execute my starter page, I get the following error:
    Error Message: JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
    Connection test runs successfully in JDev itself and I had no trouble with creating BC4j components (entity object, view and application module), mapping fields etc. Bc4j.xcfg file looks OK as well as server.xml of OC4J server.
    I guess that OC4J server is unable to connect to database, but I cannot see why and what could be done about it.
    Any recommendations would be warmly appreciated. Please send cc to [email protected] as well.
    Thanks in advance,
    Kristjan

    Kristjan,
    BC4J has a tester that can be used to test applications. Right mousew click onto the Application Module and choose tester from the menu. Use setting as defaulted. If this can't connect, then obviously the database connection defined for the Application module is different from the one you are testing. Also, make sure the database password of the connection gets deployed (checkbox option in the connection dialog)
    Frank

  • Error  while  processing  Idoc - Urgent!

    Hi all,
    I am getting the following error while processing the IDOC :
    "Application Document not posted "
    Status = 51
    Error Details :
    " V51VP - item was not found - process cancelled ".
    Any ideas, what's wrong?
    Please Help.
    Regards,

    Hi,
    U might be not passing any item value to idoc which might be necessary...wat u can do is
    goto WE19 TCODE,give the error idoc number and press execute button,now in the next screen CLICK ON INBOUND FUNCTION MODULE in the application tool bar,now give the FM NAME which triggers teh idoc,check the check box IN DEBUG MODE and radio button IN FOREGROUND....Now it will take to inside of the FM ,now debug and see where it caught the error..
    Regards,
    Nagaraj

  • Error in Process chain( Urgent Please )

    error in Process chains:
    My Process Chain errors out in the step to activate the ODS after loading data inot it.
    The loading is correct and green. The Activation step errors out .
    Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
    I get message like this :
    Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
    Message no. RSMPC129
    Diagnosis
    Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
    System response
    The return structure is corrected and the data package is marked as incorrect.
    Message was edited by:
            Chris Gokul

    Chris,
    Looks like a request has not got deleted properly from the table :
    Options that you could look at :
    1. Delete all the data from the ODS and load again ( if that is an option )
    2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
    Also please mention your BI version and patch level.
    Arun

  • QM error while GR posting-urgent

    hi all,
            We are getting Quality related error while posting GR.
    ERRor message is :<b>Change the inspection stock of material in QM only</b>.
    Have faced this problem ever before?
    regards,
    Shyam

    hi mona,
    i think the material with which u r trying to do the gr has QM view uptodated i material master.
    if that is the case then u cannot directly place the material in unrestricted use.
    u have to go through the user decision and then place the material in the respective stock.
    regards,
    indranil

  • Error while report bursting in infoview

    Hi all,
    I have created a publication for report bursting when i am scheduling in my Development  environment it is working fine and reports are generated but when same publication i m using in PRODUCTION environment it is showing below error
    2014-08-13 11:33:07,301 ERROR [pool-4-thread-7] BusinessObjects_PublicationAdminErrorLog_Instance_5189354 - [Publication ID # 5189354] - An exception was caught while fetching dynamic recipients data. Did you properly configure your publication? (FBE60311) 2014-08-13 11:33:07,316 ERROR [pool-4-thread-7] BusinessObjects_PublicationAdminErrorLog_Instance_5189354 - [Publication ID # 5189354] - An exception was caught while fetching dynamic recipients data. Did you properly configure your publication? (FBE60311) 2014-08-13 11:33:07,316 ERROR [pool-4-thread-7] BusinessObjects_PublicationAdminErrorLog_Instance_5189354 - [Publication ID # 5189354] - An exception was caught while scheduling the publication. (FBE60203) [0 recipients processed.]
    can you suggest how to resolve this . I am using Infoview 3.1
    Thanks in advance
    Regards,
    Ranjeet

    Hi Ashvin,
    Thanks for your quick reply.
    could you please elaborate or more explanation on Jar files ( where we can check the jar files in dev and prod)
    Waiting for your reply
    Regards,
    Ranjeet

  • Error while reporting on Excel Data source

    Hello OBIEE Experts,
    I have created a rpd based on excel datasheet.
    Record counts are updated and when I try to retrieve records on Physical layer, sometimes I can view records and sometimes the following error message is displayed:
    [nQSError: 16001] ODBC error state: S0002 code: - 1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Hospital'. Make sure the object exists and that you spell its name and patha name correctly..
    [nQSError: 16002] Cannot obtain nuber of columns for the query result
    While creating the report on BI Answers getting the below error:
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S0002 code: -1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Sales'. Make sure the object exists and that you spell its name and the path name correctly.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
    SQL Issued: SELECT Sales.Site saw_0, Sales."Pt# Identifier" saw_1, Sales."Q1 Charges" saw_2 FROM HosNew ORDER BY saw_0, saw_1, saw_2
    Here, HosNew is the subject area name. I don't have any password for Administrator user. The Password is <blank>. Connection pool uses Call interface: ODBC 3.5
    Please help in solving this.
    Thanks.

    hi,
    Try replicating the data source again.
    After that go to RSDS x-action there give the data source name and source system name and do restore and activations from there .
    After check if you were able to create x-fer rules first.
    Thanks
    Mukesh

  • Ora-00604 error and ora 01000 error while report generation.

    hi all,
    I am trying to generate the multiple reports of same template through a program.
    While this job is running, i get the following error at the BIP console and the reports don't get generated.
    [101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
    at recursive SQL level 1
    ORA-01000: maximum open cursors exceeded
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01000: maximum open cursors exceeded
    ORA-01000: maximum open cursors exceeded
    Kindly help.
    Thanks.

    Lots of resources with a simple search to see what this is about, for example:
    http://www.orafaq.com/wiki/ORA-01000
    ORA-01000:     maximum open cursors exceeded
    Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
    Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
    open_cursors parameter
    http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
    Oracle support note:
    OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

  • Error while reporting in parallel with ETL run!!!

    Hi All,
    It has been observed that when report is run in parallel with ETL, Report fails with following error:
    Error during SQL execution: (DA0003)
    Exception: DBD, ORA-12842: Cursor invalidated during parallel execution State: N/A
    Please let know if we can run report in parallel with ETL.

    Hi,
    thats correct. You should first load your DWH via ETL and then report off it.
    Regards
    -Seb.

  • Error while Creating sequence. Please help

    I'm using below script to create sequence but getting error
    Error report:
    SQL Error: ORA-01722: invalid number
    01722. 00000 - "invalid number"
    CREATE SEQUENCE BL_BTN_MASTER_SEQ
    MINVALUE 1
    MAXVALUE 999999999999999999
    INCREMENT BY 1
    START WITH (SELECT MAX(BULLETIN_MASTER_ID)+1
    FROM BL_BTN_MASTER)
    NOCACHE;
    FYI..Data type of bulletin_master_id column is NUMBER(22,0)
    PLease help.
    Edited by: user11228834 on May 29, 2013 10:22 AM
    Edited by: user11228834 on May 29, 2013 10:23 AM
    Edited by: user11228834 on May 29, 2013 10:25 AM

    Oracle doesn't like the "(select max(bulletin_master_id)+1 from bl_btn_master)' statement embedded in the CREATE SEQUENCE statement because if you look at the syntax it is expecting an acual number. You could use execute immediate to create the sequence this way:
    {code}
    declare
    v_seq number;
    v_statement varchar2(200);
    begin
    select max(bulletin_master_id)+1
    into v_seq
    from bl_btn_master;
    v_statement := 'CREATE SEQUENCE BL_BTN_MASTER_SEQ ' ||
    'MINVALUE 1 ' ||
    'MAXVALUE 999999999999999999 ' ||
    'INCREMENT BY 1 ' ||
    'START WITH ' || v_seq ||
    'NOCACHE';
    execute immediate(v_statement);
    end;
    {code}

Maybe you are looking for