Error while restarting server instance
hi,
i have installed Sun DS 6.3 on tw0 linux machines,and i had an replication for both of them,when i restart the server instance i get the below error,can anyone tell what would it be.
Schema - conn=-1 op=-1 msgId=-1 - User error: Entry "cn=schema", attribute "attribute" is not allowed
You have a problem in any of the schema files (instance_dir/config/schema), most probably 00core. Check it out.
Similar Messages
-
ERROR WHILE INSTALLING DATABASE INSTANCE
Hi All,
I am getting an error while installing database instance in 4.7EE with Oracle 8i.The error is
running sapstart.exe name=AS9 nr=00 SAPDIAHOST=astrum -wait
SAPSTART finished successfully on astrum_AS9_00, but Dispatcher is not connected to MessageServer.
sapparam(1c): No Profile used.
PLEASE HELP ME....hi pavan,
i believe that oracle 8i are no longer supported by SAP.
By default, SAP R/3 4.7 EE should come with Oracle 9i.
Check your installer again.
ardhian
http://sapbasis.wordpress.com -
Sync encountered an error while connecting: Server incorrectly configured
I have started getting the following message for some reason. No one has been able to answer it on the user forums. Can you help please? "Sync encountered an error while connecting: Server incorrectly configured. Please try again"
same thing, started today. i have pasted my sync-log here. my username has been changed from my real username to "username". i noticed the URL in the log. nslookup returns Non-authoritative answer:
Name: sync-rr.phx.services.mozilla.com
Addresses: 63.245.217.208
63.245.217.207
Aliases: phx-sync038.services.mozilla.com and i am able to surf to the page. it asks me for a username and password, in which i put my sync username & password. it seems to take the login/pass just fine but no page is served - it just sits on loading forever.
1309215660360 Service.Main INFO Loading Weave 1.8.0
1309215660371 Engine.Bookmarks DEBUG Engine initialized
1309215660372 Engine.Forms DEBUG Engine initialized
1309215660374 Engine.History DEBUG Engine initialized
1309215660375 Engine.Passwords DEBUG Engine initialized
1309215660376 Engine.Prefs DEBUG Engine initialized
1309215660377 Engine.Tabs DEBUG Engine initialized
1309215660378 Engine.Tabs DEBUG Resetting tabs last sync time
1309215660379 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0
1309215660382 Service.Main DEBUG Caching URLs under storage user base: https://phx-sync038.services.mozilla.com/1.1/username/
1309215660384 Service.Main INFO Starting sync at 2011-06-27 18:01:00
1309215660384 Service.Main DEBUG In sync: should login.
1309215660386 Service.Main INFO Logging in user username
1309215661024 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215661025 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215661033 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1309215661034 Service.Main DEBUG Not syncing: login returned false.
1309215661035 Service.Main DEBUG Clearing sync triggers.
1309215664700 Service.Main INFO Logging in user username
1309215664796 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215664797 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215664801 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1309215664802 Service.Main DEBUG Autoconnect failed: error.login.reason.server; retry in 89 sec.
1309215699971 Service.Main DEBUG Clearing sync triggers.
1309215704491 Service.Main INFO Starting sync at 2011-06-27 18:01:44
1309215704492 Service.Main DEBUG In sync: should login.
1309215704494 Service.Main INFO Logging in user username
1309215704839 Net.Resource DEBUG mesg: GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215704840 Net.Resource DEBUG GET fail 503 https://phx-sync038.services.mozilla.com/1.1/username/info/collections
1309215704844 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1309215704845 Service.Main DEBUG Not syncing: login returned false.
1309215704846 Service.Main DEBUG Clearing sync triggers. -
Error while Restarting weblogic application server
Hi,
While Restarting weblogic application server (10.3 installed on linux) we are getting following error :
<Aug 10, 2010 2:47:08 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<Aug 10, 2010 2:47:08 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR376251 Wed Aug 06 09:19:34 PDT 2008
WebLogic Server Temporary Patch for CR371247 Sat Aug 09 20:10:38 PDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR377673 Tue Aug 12 20:39:50 EDT 2008
WebLogic Server Temporary Patch for CR376759 Thu Aug 14 14:53:02 PDT 2008
WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
<Aug 10, 2010 2:47:11 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Aug 10, 2010 2:47:11 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Aug 10, 2010 2:47:12 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file /usr/ebiz/bea/user_projects/domains/portal_dmz_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
Exception in thread "VDE Transaction Processor Thread" java.lang.OutOfMemoryError: Java heap space
at com.octetstring.vde.Entry.readBytes(Entry.java:506)
at com.octetstring.vde.Entry.<init>(Entry.java:98)
at com.octetstring.vde.backend.standard.TransactionProcessor.run(TransactionProcessor.java:234)
<Aug 10, 2010 2:48:03 PM IST> <Error> <EmbeddedLDAP> <BEA-000000> <Error opening mapping file: /usr/ebiz/bea/user_projects/domains/portal_dmz_domain/servers/AdminServer/data/ldap/conf/mapping.cfg>
<Aug 10, 2010 2:48:03 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.InternalError
java.lang.InternalError
at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:752)
at sun.misc.URLClassPath.getResource(URLClassPath.java:168)
at java.net.URLClassLoader$1.run(URLClassLoader.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
Truncated. see log file for complete stacktrace
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:114)
at java.util.jar.JarFile.<init>(JarFile.java:133)
at java.util.jar.JarFile.<init>(JarFile.java:70)
at sun.misc.URLClassPath$JarLoader.getJarFile(URLClassPath.java:643)
Truncated. see log file for complete stacktrace
>
<Aug 10, 2010 2:48:03 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Aug 10, 2010 2:48:03 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Aug 10, 2010 2:48:03 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
x86_64 is not a supported Linux hardware platform for Autonomy.
Please suggest. Its liitle urgent. Any help will be appriciated.
Thanks and regards,
Minal BhatteMay be all classes cant be loaded.
Do you have any application which is deployed your manage server? If you say Yes:
There are three ways:
1)If Sun JVM is used, then add:
set MEM_ARGS=-Xms1280m -Xmx1280m -XX:PermSize=128m -XX:MaxPermSize=256m
*** -XX:PermSize and -XX:MaxPermSize should be equal and quarter of -Xmx. (-Xmx should also be equal to -Xms)
If BEA JRockit JVM is used, then add:
set MEM_ARGS=-Xms1280m -Xmx1280m
2) If you still get that error, increase your real memory of system.
3) For last choice, contact with your developer to tune your application. -
Error while restarting the Oracle BI
Hi,
Getting an error while trying to restart the Oracle BI. This was happened when appending the new Repository file. Below is the error msg:
<Mar 30, 2012 3:19:12 PM IST> <Error> <oracle.bi.management.sysmancommon> <BEA-0
00000> <Operation Failed: start; OracleInstance: instance1; Component: coreappli
cation_obis1; msg: 0 of 1 processes started.>
<Mar 30, 2012 3:19:12 PM IST> <Error> <oracle.bi.management.sysmancommon> <OBI-S
YSMAN-1249> <Processing Event: SEVERE: Element Type: PROCESS, Element Id: instan
ce1:coreapplication_obis1, Operation Result: FAILED_TO_START, Detail Message: Op
eration Failed: start; OracleInstance: instance1; Component: coreapplication_obi
s1; msg: 0 of 1 processes started.>
<Mar 30, 2012 3:19:12 PM IST> <Error> <oracle.bi.management.sysmancommon> <OBI-S
YSMAN-1249> <Processing Event: SEVERE: Element Type: BI_INSTANCE, Element Id: co
reapplication, Operation Result: FAILED_TO_START, Detail Message: Error in start
ing one or more components of BI Instance; Please check the server log files for
detailed message.>
ECID from WorkWrapper -> 3ccf0a9ed825fc3c:-71cd22bf:13662f5ae46:-8000-0000000000
000dae
Can any one let me know the solution.
Regards
RenjithHi,
Are you deployed new rpd file in your serve. please conform?
This error occured several reasons.
Tell me first obiee l0g or 11g.
If 10g Please follow the below steps.
1. Please check the rpd properly copied or not.\
2. Exiting rpd having any space or hyponym or dot. Please recheck?
3. Please check how many instance running your server.
use this command in your server.
ps -ef | grep nqsserver.
Still running more than one please kill the all the session and restart newly.
I am not sure this is what your looking so far.
Award points it is useful.
Thanks,
Satya -
Error While Restarting the Application Servers
Hi,
While Restarting OIM I am getting error as follows .Did any body of you have faced this error before .Kindly give me your suggestion.
Regards,
Koti.
ERROR,25 Aug 2009 17:05:01,162,[XELLERATE.AUDITOR],Unable to create auditor. com.thortech.xl.audit.groupaudit.GroupAuditor
oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: com.thortech.xl.audit.groupaudit.GroupAuditor
Dependent class: com.thortech.xl.audit.engine.AuditEngine
Loader: Xellerate.root:0.0.0
Code-Source: /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlAuditor.jar
Configuration: manifest of /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlDataObjectBeans.jar
This load was initiated at Xellerate.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2068) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@26099296]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1679) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@26099296]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1635) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@26099296]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1620) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@26099296]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap:1.5.0_06]
at java.lang.Class.forName0 (Native method) [unknown, by unknown]
at java.lang.Class.forName (Class.java:164) [jre bootstrap, by jre.bootstrap:1.5.0_06]
at com.thortech.xl.audit.engine.AuditEngine.createAuditor (Unknown source file) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlAuditor.jar (from manifest of /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlDataObjectBeans.jar), by Xellerate.root:0.0.0]
at com.thortech.xl.audit.engine.AuditEngine.initialize (Unknown source file) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlAuditor.jar (from manifest of /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlDataObjectBeans.jar), by Xellerate.root:0.0.0]
at com.thortech.xl.audit.engine.AuditEngine.getAuditEngine (Unknown source file) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlAuditor.jar (from manifest of /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlDataObjectBeans.jar), by Xellerate.root:0.0.0]
at com.thortech.xl.ejb.beansimpl.tcUnauthenticatedOperationsBean.login (Unknown source file) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlDataObjectBeans.jar (from <ejb> in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate), by Xellerate.root:0.0.0]
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession.login (Unknown source file) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlDataObjectBeans.jar (from <ejb> in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate), by Xellerate.root:0.0.0]
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native method) [unknown, by unknown]
at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:39) [unknown, by unknown]
at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:25) [unknown, by unknown]
at java.lang.reflect.Method.invoke (Method.java:585) [unknown, by unknown]
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke (EJBJoinPointImpl.java:35) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed (InvocationContextImpl.java:119) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke (DMSInterceptor.java:52) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed (InvocationContextImpl.java:119) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke (TxRequiredInterceptor.java:50) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed (InvocationContextImpl.java:119) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.system.RunAsInterceptor.invoke (RunAsInterceptor.java:31) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed (InvocationContextImpl.java:119) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke (DMSInterceptor.java:52) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed (InvocationContextImpl.java:119) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.InvocationContextPool.invoke (InvocationContextPool.java:55) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod (StatelessSessionEJBObject.java:87) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at tcUnauthenticatedOperations_RemoteProxy_6ocop18.login (Unknown source file) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlAPI.jar (from manifest of /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/oim/applications/Xellerate/xlBackOfficeBeans.jar), by com.evermind.server.ejb.proxy.ProxyClassLoader@24193012]
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native method) [unknown, by unknown]
at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java:39) [unknown, by unknown]
at sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:25) [unknown, by unknown]
at java.lang.reflect.Method.invoke (Method.java:585) [unknown, by unknown]
at com.evermind.server.rmi.RmiMethodCall.run (RmiMethodCall.java:53) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run (ReleasableResourcePooledExecutor.java:303) [u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in /u01/app/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/oc4j.jar), by oc4j:10.1.3]
at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap:1.5.0_06]
ERROR,25 Aug 2009 17:05:01,179,[XELLERATE.AUDITOR],Class/Method: AuditEngine/initialize encounter some problems: {1}
java.lang.NullPointerException
at com.thortech.xl.audit.engine.AuditEngine.initialize(Unknown Source)
at com.thortech.xl.audit.engine.AuditEngine.getAuditEngine(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUnauthenticatedOperationsBean.login(Unknown Source)
at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession.login(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.RunAsInterceptor.invoke(RunAsInterceptor.java:31)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at tcUnauthenticatedOperations_RemoteProxy_6ocop18.login(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
***********************************************************************Hi,
Are you deployed new rpd file in your serve. please conform?
This error occured several reasons.
Tell me first obiee l0g or 11g.
If 10g Please follow the below steps.
1. Please check the rpd properly copied or not.\
2. Exiting rpd having any space or hyponym or dot. Please recheck?
3. Please check how many instance running your server.
use this command in your server.
ps -ef | grep nqsserver.
Still running more than one please kill the all the session and restart newly.
I am not sure this is what your looking so far.
Award points it is useful.
Thanks,
Satya -
I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem. In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total). All of the SQL
environment is backing up fine except for a SQL Cluster Application. This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them. The other 5 SQL instances in the cluster are backing
up fine; only one instance is failing. The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
Affected area: KEN-PROD-VDB001\POSREPL1\master
Occurred since: 6/11/2011 11:00:56 PM
Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
4.
If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
Internal error code: 0x80990F85)
More information
Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
Create a recovery point...
Resolution: To dismiss the alert, click below
Inactivate alert
I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O. I have failed this SQL Application to another node in the cluster and
receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine). The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
to when the failures started to occur. However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem. We are running SQL 2008 SP2 (version 10.0.4000.0)
on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
Log Name: Application
Source: MSDPM
Date: 6/13/2011 1:09:12 AM
Event ID: 4223
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: KEN-PROD-BS002.aarons.aaronrents.com
Description:
The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSDPM" />
<EventID Qualifiers="0">4223</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
<EventRecordID>68785</EventRecordID>
<Channel>Application</Channel>
<Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
<Security />
</System>
<EventData>
<Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
1) No valid recovery points present on the replica.
2) Failure of the last express full backup job for the datasource.
3) Failure while deleting the invalid incremental recovery points on the replica.
Problem Details:
<DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
</Data>
<Binary>3C00440070006D005700720069007400650072004500760065006E0074003E003C005F005F00530079007300740065006D003E003C00490044003E00330030003C002F00490044003E003C005300650071003E0031003800330033003C002F005300650071003E003C00540069006D00650043007200650061007400650064003E0036002F00310033002F003200300031003100200035003A00300039003A0031003200200041004D003C002F00540069006D00650043007200650061007400650064003E003C0053006F0075007200630065003E0066003A005C00640070006D00760033005F00720074006D005C0070007200690076006100740065005C00700072006F0064007500630074005C0074006100700065006200610063006B00750070005C006400700073007700720069007400650072005C00760073007300660075006E006300740069006F006E0061006C006900740079002E006300700070003C002F0053006F0075007200630065003E003C004C0069006E0065003E003800310035003C002F004C0069006E0065003E003C004800610073004500720072006F0072003E0054007200750065003C002F004800610073004500720072006F0072003E003C002F005F005F00530079007300740065006D003E003C00440065007400610069006C006500640043006F00640065003E002D0032003100340037003200310032003300300030003C002F00440065007400610069006C006500640043006F00640065003E003C002F00440070006D005700720069007400650072004500760065006E0074003E00</Binary>
</EventData>
</Event>
Any help would be greatly appreciated!Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem. If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
I would also like to add that the databases on this node that will not backup are running fine. They run hundreds of transactions daily so we know SQL itself is OK. Even though it is a busy SQL Server, there is plenty of available resources as
the SQL buffer and memory counters show the node is not under durress. -
Reporting Error while Restart to apply Recent Changes in OBIEE 11g in EM
Hi Friends,
I tried to open my rpd in online mode in OBIEE 11g, For that i went into EM for getting my rpd updated...
So after all doing changes, I need to restart for applying changes, so I restarted the system components
But only 80% of it started, remaining 20% is showing error and these are the error details
"Restart failed with 2 errors: problems reported by coreapplication_obis1, coreapplication
see detailed logs for more information"..
The above is the error message that i got..
The below are the log messages that reported error
Message type: Error
Message ID : -
Message : SEVERE:Element type:BI_instance,element_id:coreapplication,operation result:failed_to_start, detail Message-Error in starting one or more components of Bi instance; please check the server log files for detailed information..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type: Error
Message ID : -
Message : SEVERE:element type:process, element Id: coreapplication_obis1, operation result: failed_to_start, detail message- operation failed: start; oracle instance: instance4; component; coreapplication_obis1;msg: 0 of 1 processes started..
Target : biadmin services(11.1.1)(Admin server)
Target type : application deployment
Log files : Admin server_diagnostic.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: BI_instance:coreapplication; failed_to_start; error in starting one or more components of BI instance; please check server log files for detailed information..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
Message type : Error
Message ID : EM-02694
Message : Supplementary information regarding operation: PROCESS:coreapplication_obis1; failed_to_start; operation failed: start; oracle instance:instance4;component:coreapplication_obis1;msg 0 of 1 processes started..
Target : em(Admin server)
Target type : application deployment
Log files : emoms.log
how to solve these errors, because of this i couldn't able to open my repository in online mode as well as cannot able to update my .rpd file in presentation services in obiee 11g..
I couldn't able to understand the error that is pointing to me....
Help me friends..........
Regards,
Harry...It's myself harry and i solved this problem, since this problem occurred for me as i tried to update my repository.rpd file for more than 5 times because of the error that it reported to me in my previous post...
How i solved this error means, i deleted all the other .rpd files(out of 5 i deleted 4) and i made some changes in my rpd file in the administration tool and after that i tried to update my rpd in EM..
Once it updated, then i gave restart to apply recent changes, after that my system components tempt to work as of 100%...
Anyway friends thanks for your views.....
Cheers
Harry...
Edited by: HariPrasad on Nov 13, 2010 2:59 AM -
Certificate error while admin server startup (solaris 8, wls 8.1.4)
HI All,
I am getting the following error while starting up my admin server using startWebLogic.sh.
<Feb 5, 2010 7:51:19 AM GMT> <Notice> <WebLogicServer> <BEA-000327> <Starting WebLogic Admin Server "BOS1-ADMIN" for domain "BOS1">
java.io.IOException: Inconsistent security configuration, Certificate expired: [
Version: V3
Subject: EMAILADDRESS=******************, CN=***********, OU=********, O=************, L=*******, ST=*******, C=**
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: com.sun.net.ssl.internal.ssl.JSA_RSAPublicKey@672
Validity: [From: Thu Feb 03 11:25:08 GMT 2005,
To: Tue Feb 02 11:25:08 GMT 2010]
Issuer: EMAILADDRESS=******************, CN=***********, OU=********, O=************, L=*******, ST=*******, C=**
SerialNumber: 00
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: E9 1E E1 30 86 89 7E 1A 67 A2 58 5B 9D 8A 9E 7A ...0....g.X[...z
0010: C1 CF C4 DA ....
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: E9 1E E1 30 86 89 7E 1A 67 A2 58 5B 9D 8A 9E 7A ...0....g.X[...z
0010: C1 CF C4 DA ....
EMAILADDRESS=******************, CN=***********, OU=********, O=************, L=*******, ST=*******, C=**
SerialNumber: 00]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:true
PathLen:2147483647
Algorithm: MD5withRSA
Signature:
0000: 74 15 DF 05 54 27 1D 1D D5 35 F4 99 24 1A 84 1C t...T'...5..$...
0010: BF 93 25 FA 50 D7 1E 36 66 7F 30 1A EF 67 2A 79 ..%.P..6f.0..g*y
0020: 4A 72 FD C1 3B 33 05 61 D0 52 92 2D 15 89 68 67 Jr..;3.a.R.-..hg
0030: E8 13 A6 60 18 38 16 53 16 22 CC 4D 87 19 9F 30 ...`.8.S.".M...0
0040: 28 F3 3C C0 4C C2 C4 34 69 D3 BA 5C B2 4D 8A FF (.<.L..4i..\.M..
0050: AA DD BD 04 96 AF 69 05 73 77 8D 93 89 90 5D 23 ......i.sw....]#
0060: E9 D0 CA 02 5A 20 39 40 85 12 A9 67 04 ED 7B 59 ....Z [email protected]
0070: 34 FB 31 E7 AD F6 C0 AE E4 5E 66 BB 8E 7D 45 72 4.1......^f...Er
at weblogic.t3.srvr.SSLListenThread.initSSLContext(SSLListenThread.java:205)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:139)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1637)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:890)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:664)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:342)
at weblogic.Server.main(Server.java:32)
Any thoughts to share mates????
I have already posted this topic in general discussion forum and as suggested by faisal posting here as well..Please let me know how to renew certificates????
Cheers,
DineshHi Dinesh,
Below are the steps to renew / get new certificates.
Step A -- Create a Keystore file
1. Using keytool, enter the following:
keytool -genkey -alias server -keyalg RSA -keystore your_domain.jks
'your_domain' in the command above should be the name of the domain you are securing. If you are ordering a Wildcard Certificate, do not include the * in the filename as it is not a valid filename character.
2. You will be prompted to enter the information for your certificate.
Please note: When prompted for the first and last name, DO NOT enter your first and last name. Instead, enter the name to which the certificate is being issued (e.g., www.yourdomain.com, mail.yourdomain.com, *.yourdomain.com).
3. When prompted, enter 'y' or 'yes' to confirm. You will next be asked for a password. You will need to use this same password when generating a CSR and importing your certificates.
Step B -- Generate a CSR from your new keystore
1. Use keytool to create a Certificate Signing Request from your keystore:
keytool -certreq -alias server -keyalg RSA -file your_domain.csr -keystore your_domain.jks
Again, 'your_domain' is the name of the domain you are securing. (without the * character if you are ordering a Wildcard Certificate).
2. Enter the keystore password.
3. Submit the CSR to the Certificate Authority for the certificates.
Step C: Import and Install the Certificates.
1. First you will need to install the Root CA Certificate into your keystore. Copy-and-paste the root certificate from the body of the fulfillment email into a simple text editor such as Notepad.
2. Save the file to your server as trustroot.pem in the same directory where your keystore was created.
3. Using the java keytool command line utility, import the root certificate geotrustroot.pem into your keystore using the following command:
keytool -import -alias geotrustca -keystore mykeystore -file geotrustroot.pem
The command should be typed on one line. This command imports the GeoTrust Root CA Certificate into the keystore named mykeystore.
Step D: Import and Install the SSL Server Certificate
1. Next install your SSL Server Certificate (public key) into your keystore. Copy-and-paste the server certificate from the body of the fulfillment email into a simple text editor such as Notepad.
2. Save the file to your server as public.pem in the same directory where your keystore was created.
3. Using the java keytool command line utility, import the SSL server certificate public.pem into your keystore using the following command:
keytool -import -alias tomcat -keystore mykeystore -file public.pem
The command should be typed on one line. This command imports the SSL server certificate into the keystore named
mykeystore.
Step E: Configuring Keystores
1. Both the GeoTrust root CA and SSL server certificates are now installed on your server. Next you will need to configure the keystores by following the instructions in the WebLogic documentation section Configuring Keystores.
2. Restart the WebLogic server.
Hope the information helps.
Regards,
Raj -
Error while install DB instance using SAPinst
Hi,
I have the following error while installing High Availability Database instance
with option system copy-> restore from offline backup.
We are at env. Window server 2003, MS SQL serevr 2005 SP 3.
Can anybody help? thanks.
ERROR 2009-02-11 14:45:45
FCO-00011 The step dGetSchemas with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaInfo|ind|ind|ind|ind|0|0|dGetSchemas was executed with status ERROR .
Regards
ChinLine 94, 97 and 100 appear to not have spaces at the beginning of each string, which could cause some issues:
#set reporting to off
$command += ('/SQMREPORTING="0"')
#Add Browser Account
$command +=('/BROWSERSVCSTARTUPTYPE="Disabled"')
#Add Backup path
$command +=('/SQLBACKUPDIR="{0}"' -f $backuppath)
Probably should be this:
#set reporting to off
$command += (' /SQMREPORTING="0"')
#Add Browser Account
$command +=(' /BROWSERSVCSTARTUPTYPE="Disabled"')
#Add Backup path
$command +=(' /SQLBACKUPDIR="{0}"' -f $backuppath)
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book -
Configuring Listeners error while converting single instance db to RAC +ASM
Every time when I refresh the db with production db and try to convert to cluster db using rconfig I get this error.
Verified xml file and every thing is correct in it.
rconfig convertTOrac.xml
Converting Database LABDB. to Cluster Database. Target Oracle Home : /u01/app/oracle/product/10.2.0.4/db_1.
Setting Data Files and Control Files
Adding Database Instances
Adding Redo Logs
Enabling threads for all Database Instances
Setting TEMP tablespace
Adding UNDO tablespaces
Adding Trace files
Setting Flash Recovery Area
Updating Oratab
Creating Password file(s)
Configuring Listeners
<?xml version="1.0" ?>
<RConfig version="1.1" >
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Got Exception
</Result>
<ErrorDetails>
oracle.sysman.assistants.rconfig.engine.ListenerCreationException: oracle.sysman.assistants.util.NetAPIException: TNS-04404: no error
caused by: oracle.net.config.ConfigException: TNS-04414: File error
caused by: TNS-04610: No literals left, reached end of NV pair
Operation Failed. Refer logs at /u01/app/oracle/product/10.2.0.4/db_1/cfgtoollogs/rconfig/rconfig.log for more details.
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
You have new mail in /var/spool/mail/oracle
I know its a problem with TNS but still i could not figure out where I am going wrong. Here is the TNS.
Parameter:
*.local_listener=LISTENERS_LABDB
*.remote_listener=''
TNS: Same has been updated in all the 3 nodes but still no luck.
LABDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = melrhrac2lab1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = melrhrac2lab2-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = melrhrac2lab3-vip)(PORT = 1521))
(ENABLE = BROKEN)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = LABDB_APPSVR)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
LISTENERS_LABDB =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = melrhrac2lab1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = melrhrac2lab2-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = melrhrac2lab3-vip)(PORT = 1521))
Regards,I tried commenting local_listener and also by setting local_listener='' but still no luck. It failed with same error while configuring listerners.
I would like to know what exatly it(configuring listeners) is trying to do. Please advice.
Note: I am not using a shared oracle home, each node in the cluster has its own oracle installation residing on local disk. Is a shared oracle home a pre-requisite for using rconfig?
Edited by: Brunie on Nov 14, 2009 10:31 PM -
Error while configuring second instance of OIF
Hi,
i am installing OIF in dev environment in clusterred mode. I was able to create one instance successfully, but whille creating second i am getting error.
The parameters of im_config_only.rsp are as below:
[ENGINE]
#DO NOT CHANGE THIS.
Response File Version=1.0.0.0.0
[GENERIC]
#Provide true to create a new weblogic domain. WebLogic Server must already be installed.
CREATE_NEW_DOMAIN=false
#Provide true to extend domain. WebLogic Server must already be installed and the domain must be up and running.
USE_EXISTING_DOMAIN=false
#Provide true to configure components without domain.
NO_DOMAIN=false
#Provide true to expand the clusters in domain. WebLogic Server must already be installed and the domain must be up and running.
EXTEND_CLUSTER=true
#Domain name may only contain alphanumeric characters or the underscore (_) or hyphen (-) characters.
DOMAIN_NAME=IDMDomain
#Provide the complete path of domain home.
DOMAIN_HOME=/users/oif/Oracle/Middleware/user_projects/domains/IDMDomain
#Provide the User Name for WebLogic Domain. The value may only contain alphanumeric characters, or the underscore (_) or hyphen (-) characters.
DOMAIN_ADMINISTRATOR_USERNAME=admin
#Provide the password for WebLogic Domain. Valid passwords are 8 to 30 characters long, must begin with an alphabetic character, use only alphanumeric, underscore (_), dollar ($) or pound (#) characters and include at least one number.
DOMAIN_ADMINISTRATION_PASSWORD=xxxxxxx
#Confirm the WebLogic Domain password.
ADMINISTRATOR_PASSWORD_CONFIRM=xxxxxxx
#Provide the localhost name for Create Domain and machine name on which domain is up and running for Extend Domain and Expand Cluster.
DOMAIN_HOST_NAME=xxxxxx
#Provide the port in which domain is up and running. Required for Extend Domain and Expand Cluster.
DOMAIN_PORT_NO=7001
#Write the complete path to a valid Middleware Home.
AS_HOME_LOCATION=/users/oif/Oracle/Middleware
#Give the complete path to a valid WebLogic Server Home.
WL_HOME=/users/oif/Oracle/Middleware/wlserver_10.3
#Give the name of the Oracle Home directory. The Oracle Home directory name may only contain alphanumeric , hyphen (-) , dot (.) and underscore (_) characters, and it must begin with an alphanumeric character.
ORACLE_HOME=/users/oif/Oracle/Middleware/Oracle_IDM1
#Give the complete path for an Oracle Instance directory to be created. This is the location where the software configuration files and runtime processes will reside.
INSTANCE_HOME=/users/oif/Oracle/Middleware/oif_inst2
#Give a name for Oracle Instance corresponding to the Instance Home. The Oracle Instance name may only contain alphanumeric and underscore (_) characters, it must begin with an alphabetic (a-z or A-Z) character, and must be from 4 to 30 characters in length.
INSTANCE_NAME=oif_inst2
#Give OID if Oracle Internet Directory is selected for configuration.
LIST_OF_COMPONENTS_FOR_SCHEMAS=OID:
#Set this to true if you want the configuration wizard to assign the ports automatically.
AUTOMATIC_PORT_DETECT=true
#Give the location for the file containing the list of static ports if you manually want to assign ports.
STATICPORT INI FILE LOCATION=
#Provide a password for a new account to connect to the Oracle Virtual Directory administrative service, cn=orcladmin. Use 5-30 characters. Use only alphanumerics, underscore (_), dollar ($), or pound (#). At least one number is required.
OVD_ADMIN_PASSWORD=<SECURE VALUE>
#Confirm the password of Oracle Virtual Directory administrative service.
CONFIRM_OVD_ADMIN_PASSWORD=<SECURE VALUE>
#Provide the base, or the leftmost entry, of the virtual directory namespace that Oracle Virtual Directory will use to set its initial Access Control Lists (ACLs). For example, for the namespace dc=mycompany,dc=com, you would enter dc=com.
OVD_LDAPv3_NAME_SPACE=dc=us,dc=oracle,dc=com
#Provide true to enable the HTTP Web Gateway to be protected by SSL. Oracle highly recommends that you use SSL/TLS for Oracle Virtual Directory's administrative gateway service. Disabling SSL/TLS could result in your server administration traffic being monitored and even compromised.
IS_ADMIN_SERVER_OF_OVD_IN_SECURE_MODE=true
#provide true for securing HTTP client connection information. Give true if HTTP Web Gateway is set to true.
IS_HTTP_WEB_GATEWAY_OF_OVD_SECURE=false
#Provide true for Oracle Virtual Directory to be configured.
IS_LDAP_CLIENT_LISTENER_FOR_OVD_SELECTED=false
#Oracle Virtual Directory includes an HTML-based gateway that provides DSML and XSLT-rendered directory reporting. Provide true to enable HTML-based gateway.
IS_HTTP_WEB_GATEWAY_OF_OVD_SELECTED=false
#Specify a new Administrator User Name to connect to the Oracle Virtual Directory administrative service, For example, for the Administrator User Name you would enter cn=orcladmin.
OVD_ADMIN=cn=orcladmin
#Provide true if OID scheme version is 10g.
OID_UPGRADE_FLAG=false
#Provide true to create OID Schema.
CREATE_OID_SCHEMA=false
#Provide the OID schema name.
OID_SCHEMA_NAME=ODS
#Provide true if ODS schema chosen is already being used by an existing OID . Please ensure that the system time on this Identity Management Node is in sync with the time on other Identity Management Nodes that are part of this Oracle Application Server Cluster (Identity Management) configuration. Failure to ensure this may result in unwanted instance failovers, inconsistent operational attributes in directory entries and potential inconsistent behaviour of password state policies.
IS_SECOND_OID_INSTALL=true
#Provide true if RAC database is used.
IS_OID_RACDB_INSTANCE_NAME_SPECIFIED=false
#Provide the DN of the top node for storing component data in the directory. This can be a realm, or the top node of a branch, instead of the top node of the directory.
OID_NAMESPACE=dc=us,dc=oracle,dc=com
#Provide a 5-30 character password for OID server administrator. Use only alphanumerics, underscore (_), dollar ($), or pound (#). At least one number is required.
OID_ADMIN_PASSWORD=<SECURE VALUE>
#Confirm OID Administrator password.
OID_ADMIN_CONFIRM_PASSWORD=<SECURE VALUE>
#Provide Oracle Internet Directory Server user name.
OID_USER=cn=orcladmin
#Provide a 5-30 character password for PKCS12. Use only alphanumerics, underscore (_), dollar ($), or pound (#). At least one number is required.
PKCS12_PASSWORD=xxxx
#Confirm PKCS12 password
PKCS12_PASSWORD_CONFIRM=xxxxx
#The Server ID identifies the Oracle Identity Federation instance. The Server ID must be unique within the domain per logical Oracle Identity Federation instance. Thus, clustered instances acting as a single logical instance will have the same Server ID.
OIF_SERVER_ID=oif_server2
#Provide true for Advanced Configuration of Oracle Identity Federation. The user would be able to specify the Authentication Mechanism, User Data Store, Federation Data Store and the Transient Data Store.
OIF_CONFIGURATION_TYPE_ADVANCED=true
#Provide true for Basic Configuration of Oracle Identity Federation.
OIF_CONFIGURATION_TYPE_BASIC=false
#Provide Authentication Mechanism for Oracle Identity Federation. Valid values are JAAS and LDAP.
OIF_AUTHENTICATION_TYPE=JAAS
#Provide User Data Store type for Oracle Identity Federation. Valid values are NONE,LDAP and RDBMS.
OIF_USER_STORE_TYPE=NONE
#Provide Federation Data Store type for Oracle Identity Federation. Valid values are NONE,LDAP,RDBMS and XML.
OIF_FEDERATION_STORE_TYPE=NONE
#Provide User Session Store type for Oracle Identity Federation. Valid values are MEMORY and RDBMS.
OIF_USER_SESSION_STORE_TYPE=RDBMS
#Provide Message Store type for Oracle Identity Federation. Valid values are MEMORY and RDBMS.
OIF_MESSAGE_STORE_TYPE=RDBMS
#Provide Configuration Store type for Oracle Identity Federation. Valid values are FILE and RDBMS.
OIF_CONFIGURATION_STORE_TYPE=RDBMS
#Provide true if User Data Store type is LDAP.
IS_OIF_USER_STORE_LDAP_TYPE=false
#Provide true if User Data Store type is RDBMS.
IS_OIF_USER_STORE_RDBMS_TYPE=false
#Provide true if Federation Data Store type is LDAP.
IS_OIF_FEDERATION_STORE_LDAP_TYPE=false
#Provide true if Federation Data Store type is RDBMS.
IS_OIF_FEDERATION_STORE_RDBMS_TYPE=false
#Provide true if Oracle Identity Federation Store is of type RDBMS.
IS_OIF_STORE_RDBMS_TYPE=true
#Provide true if Federation Authentication Mechanism is LDAP.
IS_OIF_AUTHENTICATION_LDAP_TYPE=false
#Provide true if Message Store type is RDBMS.
IS_OIF_MESSAGE_STORE_RDBMS_TYPE=true
#Provide true if Configuration Store type is RDBMS.
IS_OIF_CONFIGURATION_STORE_RDBMS_TYPE=true
#Provide true if Federation Data Store type is XML.
IS_OIF_FEDERATION_STORE_XML_TYPE=false
#Provide the full path for the Transient Data Store database host, listen port, and service name , for example, myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
TRANSIENT_RDBMS_HOSTNAME=xxxxxx
#Provide the Oracle Identity Federation schema name for Transient Data Store.
TRANSIENT_RDBMS_USER_NAME=ST_OIF
#Provide the password for Transient Data Store schema.
TRANSIENT_RDBMS_PASSWORD=xxxxx
#Provide true if RAC Database is used for Transient Data Store.
IS_OIF_TRANSIENT_STORE_RAC_INSTANCE_SPECIFIED=false
#Provide true if RAC Database with instance name is used for Transient Data Store.
OIF_RACDB_TRANSIENT_STORE_URL_WITH_INSTANCE=false
#Provide the full path for the User Store database host, listen port, and service name , for example, myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
USER_RDBMS_HOSTNAME=localhost:1521:orcl.us.oracle.com
#Provide the database user name for User Data Store.
USER_RDBMS_USER_NAME=scott
#Provide the password for User Data Store user.
USER_RDBMS_PASSWORD=<SECURE VALUE>
#Provide Login Table for User Data Store user.
USER_RDBMS_LOGIN_TABLE=EMP
#Provide User ID Attribute for User Data Store.
USER_RDBMS_USER_ID_ATTRIBUTE=ENAME
#Provide User Description Attribute for User Data Store.
USER_RDBMS_USER_DESCRIPTION_ATTRIBUTE=JOB
#Provide true if RAC Database is used for User Data Store.
IS_OIF_USER_STORE_RAC_INSTANCE_SPECIFIED=
#Provide true if RAC Database with instance name is used for User Data Store.
OIF_RACDB_USER_STORE_URL_WITH_INSTANCE=
#Provide the full path for the Federation Data Store database host, listen port, and service name , for example, myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
FEDERATION_RDBMS_HOSTNAME=localhost:1521:orcl.us.oracle.com
#Provide the Oracle Identity Federation schema name for Federation Data Store.
FEDERATION_RDBMS_USER_NAME=dev_oif
#Provide the password for Federation Data Store schema.
FEDERATION_RDBMS_PASSWORD=<SECURE VALUE>
#Provide true if RAC Database is used for Federation Data Store.
IS_OIF_FED_STORE_RAC_INSTANCE_SPECIFIED=<SECURE VALUE>
#Provide true if RAC Database with instance name is used for Federation Data Store.
OIF_RACDB_FED_STORE_URL_WITH_INSTANCE=<SECURE VALUE>
[SYSTEM]
[APPLICATIONS]
#Provide true if configuring in a clustered environment.
IS_CLUSTER_CONFIGURATION=true
[RELATIONSHIPS]
#Provide true to configure Oracle Internet Directory.
CONFIGURE_OID_COMPONENT=false
#Provide true to configure Oracle Directory Integration Platform.
CONFIGURE_DIP_COMPONENT=false
#Provide true to configure Oracle Virtual Directory.
CONFIGURE_OVD_COMPONENT=false
#Provide true to configure Oracle Identity Fedration.
CONFIGURE_OIF_COMPONENT=true
#Provide true to configure Oracle Directory Service Manager.
CONFIGURE_ODSM_COMPONENT=false
#Provide true to configure Enterprise Management.
CONFIGURE_EM_COMPONENT=false
#Provide true to configure federation components.
FEDERATION_COMPONENTS_FOR_CONFIGURE=false
#Provide true to configure management components.
MANAGEMENT_COMPONENTS_FOR_CONFIGURE=false
#Provide the list of components selected for configuration separated by colon. Example OID:OVD:DIP:ODSM
SELECTED_COMPONENTS_FOR_CONFIGURATION=OIF
#Enter the full path, listen port, and service name for the database, for example myserver.mycompany.com:1111:mydb1. Separate the path, port, and service name using a colon (:).
OID_DB_INFO=localhost:1521:orcl.us.oracle.com
#Provide the database OID schema name.
OID_DB_USER=ODS
#Provide the database ODSSM schema name
ODSSM_DB_USER=ODSSM
#Provide the ODS schema password.
ODS_PASSWORD=<SECURE VALUE>
#Confirm the ODS Schema password.
CONFIRM_ODS_PASSWORD=<SECURE VALUE>
#Provide the ODSSM schema password.
ODSSM_PASSWORD=<SECURE VALUE>
#Confirm the ODSSM schema password.
CONFIRM_ODSSM_PASSWORD=<SECURE VALUE>
#Provide false if service name is used.
IS_SERVICE_ID_USED=false
#Provide true if RAC database URL with instance name is used.
OID_RACDB_URL_WITH_INSTANCE_NAME=<SECURE VALUE>
#Provide the Administrator password for Oracle Internet Directory.
OID_ADMIN_PASSWORD=<SECURE VALUE>
#Provide true to create a new metadata repository in the database provided by the user. The schema here refers to the ODS schema for OID.
CREATE_NEW_SCHEMA=false
#Provide true if component schema has already been created using Repository Creation Utility (RCU) into an available database. The schema here refers here to the ODS schema for OID.
USE_EXISTING_SCHEMA=true
#Provide the database user name. The user must have SYSDBA user privileges in order to create the metadata repository.
CREATE_DATABASE_USERNAME=
#Provide the database password. The user must have SYSDBA user privileges in order to create the metadata repository.
CREATE_DATABASE_PASSWORD=<SECURE VALUE>
#Provide the LDAP Type for Authentication Mechanism. Valid values are Oracle Internet Directory,Oracle Virtual Directory,Microsoft Active Directory,SunOne and IBM Directory Server
AUTHENTICATION_LDAP_TYPE=Oracle Internet Directory
#Provide the LDAP URL for Authentication Mechanism. Format:ldap://host:port or ldaps://host:port.
AUTHENTICATION_LDAP_TYPE_LDAP_URL=ldap://localhost:3060
#Provide the user name of LDAP server for Authentication Mechanism.
AUTHENTICATION_LDAP_TYPE_LDAP_USER_NAME=cn=orcladmin
#Provide the LDAP server password for Authentication Mechanism.
AUTHENTICATION_LDAP_TYPE_LDAP_PASSWORD=<SECURE VALUE>
#Provide the LDAP Base DN for Authentication Mechanism.
AUTHENTICATION_LDAP_BASE_DN=dc=us,dc=oracle,dc=com
#Provide the LDAP User Credential ID for Authentication Mechanism.
AUTHENTICATION_USER_CREDENTIAL_ID_ATTRIBUTE=uid
#Provide the LDAP User Unique ID for Authentication Mechanism.
AUTHENTICATION_USER_UNIQUE_ID_ATTRIBUTE=uid
#Provide the LDAP Person Object Class for Authentication Mechanism.
AUTHENTICATION_PERSON_OBJECT_CLASS=inetOrgPerson
#Provide the LDAP User Description Attribute for User Data Store.
USER_LDAP_USER_DESCRIPTION_ATTRIBUTE=uid
#Provide the LDAP User ID Attribute for User Data Store.
USER_LDAP_USER_ID_ATTRIBUTE=orclguid
#Provide the LDAP User Unique ID for User Data Store.
USER_LDAP_UNIQUE_ID=<SECURE VALUE>
#Provide the LDAP Person Object Class for User Data Store.
USER_LDAP_PERSON_OBJECT_CLASS=inetOrgPerson
#Provide the LDAP Base DN for User Data Store.
USER_LDAP_BASE_DN=dc=us,dc=oracle,dc=com
#Provide the LDAP Type for User Store. Valid values are Oracle Internet Directory,Oracle Virtual Directory,Microsoft Active Directory,SunOne and IBM Directory Server
USER_LDAP_TYPE=Oracle Internet Directory
#Provide the LDAP URL for User Data Store. Format:ldap://host:port or ldaps://host:port.
USER_LDAP_URL=ldap://localhost:3060
#Provide the user name of LDAP server for Federation Data Store.
USER_LDAP_USER_NAME=cn=orcladmin
#Provide the LDAP server password for User Data Store.
USER_LDAP_PASSWORD=<SECURE VALUE>
#Provide the LDAP User Federation Record Context for Federation Data Store.
FEDERATION_LDAP_USER_RECORD_CONTEXT=
#Provide the LDAP Type for Federation Data Store. Valid values are Oracle Internet Directory,Microsoft Active Directory,SunOne and IBM Directory Server
FEDERATION_LDAP_TYPE=Oracle Internet Directory
#Provide the LDAP URL for Federation Data Store. Format:ldap://host:port or ldaps://host:port.
FEDERATION_LDAP_URL=ldap://localhost:3060
#Provide the LDAP Container Object Class for Federation Data Store.
FEDERATION_LDAP_CONTAINER_OBJECT_CLASS=
#Provide the LDAP Domain Prefix for Federation Data Store. This value is needed only when LDAP type is Microsoft Active Directory.
FEDERATION_LDAP_AD_DOMAIN_PREFIX=
#Provide the user name of LDAP server for Federation Data Store.
FEDERATION_LDAP_USER_NAME=cn=orcladmin
#Provide the LDAP server password for Federation Data Store.
FEDERATION_LDAP_PASSWORD=<SECURE VALUE>
#Provide the My Oracle Support Username. If you wish to ignore Oracle Configuration Manager configuration provide empty string for user name.
MYORACLESUPPORT_USERNAME=
#Provide the My Oracle Support Password
MYORACLESUPPORT_PASSWORD=
#Set this to true if you wish to decline the security updates. Setting this to true and providing empty string for My Oracle Support username will ignore the Oracle Configuration Manager configuration
DECLINE_SECURITY_UPDATES=true
#Set this to true if My Oracle Support Password is specified
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
#Provide the Proxy Host
PROXY_HOST=
#Provide the Proxy Port
PROXY_PORT=
#Provide the Proxy Username
PROXY_USER=
#Provide the Proxy Password
PROXY_PWD=
#Provide true if extending the Oracle Identity Federation cluster
EXTEND_OIF_CLUSTER=true
#Provide true if extending the Oracle Directory Service cluster.
EXTEND_ODS_CLUSTER=false
#Provide true if DIP Schema version is 10g.
DIP_UPGRADE_FLAG=false
The error i am getting is :
Checking swap space: must be greater than 500 MB. Actual 8192 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-04-16_02-47-54AM. Please wait ...iamoifat-z2> Log: /users/oif/Oracle/oraInventory/logs/install2013-04-16_02-47-54AM.log
Copyright (c) 1982, 2010, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Verifying data......
[VALIDATION] [ERROR]:INST-07270: Specified instance name already exists in the domain
[VALIDATION] [SUGGESTION]:Provide a different value
configuration Failed. Exiting configuration due to data validation failure.
Please help and let me know if i have missed any thing. As i am new to OIF , also let me know if other details are requiredAny one has any idea??/
-
Hi All,
we are getting below error while starting Admin Server.
we have tried resetting boot.properties file and deleting ldap files, clearing caceh, tmp files but no luck.
Please let us know if anyone has any solution:
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <WebLogicServer> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137206> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Mar 19, 2012 10:15:37 AM CDT> <Notice> <Log Management> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137316> <BEA-170019> <The server log file /abcd/admin/soa_domain/aserver/soa_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Log Management> <abcd.oracle.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1332170137324> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Diagnostics> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137384> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "t3" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "t3s" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "http" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137448> <BEA-002622> <The protocol "https" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137449> <BEA-002622> <The protocol "iiop" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137449> <BEA-002622> <The protocol "iiops" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137450> <BEA-002622> <The protocol "ldap" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137450> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137451> <BEA-002622> <The protocol "cluster" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137452> <BEA-002622> <The protocol "clusters" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137455> <BEA-002622> <The protocol "snmp" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137455> <BEA-002622> <The protocol "admin" is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137456> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <RJVM> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137472> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address 199.25.245.5:49701
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Server> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137524> <BEA-002609> <Channel Service initialized.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Socket> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137594> <BEA-000436> <Allocating 4 reader threads.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <Socket> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137596> <BEA-000446> <Native IO Enabled.>
####<Mar 19, 2012 10:15:37 AM CDT> <Info> <IIOP> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170137754> <BEA-002014> <IIOP subsystem enabled.>
####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138772> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138892> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_mN86Z6ErrPlX8QgPm9/flN0P8GA=>
####<Mar 19, 2012 10:15:38 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170138965> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139186> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139671> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139682> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Mar 19, 2012 10:15:39 AM CDT> <Info> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139847> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm myrealm.>
####<Mar 19, 2012 10:15:39 AM CDT> <Notice> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139848> <BEA-090082> <Security initializing using security realm myrealm.>
####<Mar 19, 2012 10:15:39 AM CDT> <Critical> <Security> <abcd.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1332170139972> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
####<Mar 19, 2012 10:15:39 AM CDT> <Critical> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170139974> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User ohsadmin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User ohsadmin denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at com.bea.common.security.internal.service.JAASLoginServiceImpl.login(JAASLoginServiceImpl.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy22.login(Unknown Source)
at weblogic.security.service.internal.WLSJAASLoginServiceImpl$ServiceImpl.login(WLSJAASLoginServiceImpl.java:89)
at com.bea.common.security.internal.service.JAASAuthenticationServiceImpl.authenticate(JAASAuthenticationServiceImpl.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.common.security.internal.utils.Delegator$ProxyInvocationHandler.invoke(Delegator.java:57)
at $Proxy40.authenticate(Unknown Source)
at weblogic.security.service.WLSJAASAuthenticationServiceWrapper.authenticate(WLSJAASAuthenticationServiceWrapper.java:40)
at weblogic.security.service.PrincipalAuthenticator.authenticate(PrincipalAuthenticator.java:348)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:929)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Mar 19, 2012 10:15:40 AM CDT> <Notice> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140016> <BEA-000365> <Server state changed to FAILED>
####<Mar 19, 2012 10:15:40 AM CDT> <Error> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140016> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Mar 19, 2012 10:15:40 AM CDT> <Notice> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140019> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Mar 19, 2012 10:15:40 AM CDT> <Info> <WebLogicServer> <abcd.oracle.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1332170140035> <BEA-000236> <Stopping execute threads.>This line in the error list may point you towards solution :
+<1332170139972> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>+
I reckon the boot.properties is not correct. You can recreate the file - adding the new credentials. Check the OBE [url http://st-curriculum.oracle.com/obe/fmw/wls/10g/r3/installconfig/enable_auto_login/boot_identity_file.htm]Enabling Auto Login by Using the Boot Identity File for more information.
Thanks,
EJ -
Error while starting server in UNIX environment
Hi,
I am getting the following error while starting servers:
Oracle BI Presentation Services 10.1.3.4 (Build 080726.1900) are starting up.
Type: Error
Severity: 40
Time: Thu Jun 3 06:41:00 2010
File: project/webcatalog/localwebcatalog.cpp Line: 761
Properties: ThreadID-1
Location:
saw.catalog.local.readObject
saw.catalog.local.loadCatalog
saw.webextensionbase.init
saw.sawserver
Error outside of Presentation Catalog occurred.
Type: Error
Severity: 40
Time: Thu Jun 3 06:41:00 2010
File: project/webcatalog/localwebcatalog.cpp Line: 761
Properties: ThreadID-1
Location:
saw.catalog.local.readObject
saw.catalog.local.loadCatalog
saw.webextensionbase.init
saw.sawserver
Error outside of Presentation Catalog occurred.
Type: Error
Severity: 20
Time: Thu Jun 3 06:41:00 2010
File: project/sawserver/main.cpp Line: 338
Properties: ThreadID-1
Location:
saw.sawserver
Error loading security account .
Attempted to use an unconstructed lock.
Current Owner thread id: 0 (0x0)
Current thread id: 1 (0x1)
Lock pointer: 0xf2a2efa8
Lock created in file: server/include/Utility/Generic/SUGRecursiveLock.h
Lock created on line: 34
Lock created in function: NQRecursiveLock<NQCriticalSection>::NQRecursiveLock
Error in file: server/Utility/Generic/NQThreads/SUGCriticalSection.cpp
Error on line: 242
Error in function: NQCriticalSection::Acquire
/orapsdev/BI/setup/sawserver.sh[7]: 786638 IOT/Abort trap(coredump)
Kindly help to find a solution to it.
Regards,
RahulHi
I came accrossed this kind of problems before, when I checked the log, I found almost the same error you mentioned and the BI Preenstation services is not started up.
As my experience, there would be something wrong with the presentation catalog, I changed the catalog to samplesales and it is ok, so I redeploy the specific catalog and then it is ok.
hope this can help.
thanks & regards
henry -
Scenario manager error while starting server
can anyone please give the solution for the below error:
15:26:33,796 ERROR [ScenarioManager] Error while trying to complete pending oper
ation PendingDeletion[scenarioDeletion:3000001,/myscenario/custom.sdl,null,13457
91138625]
atg.process.ProcessException: Null value for property "subject" of repository it
em individualScenario:10000002
at atg.process.ProcessUtils.getNonNullPropertyValue(ProcessUtils.java:21
1)
at atg.process.ProcessManagerService.getSubject(ProcessManagerService.ja
va:3093)
at atg.process.ProcessManagerService.deleteIndividualInstance(ProcessMan
agerService.java:3288)
at atg.process.ProcessManagerService.deleteBatch(ProcessManagerService.j
ava:3330)
at atg.process.PendingDeletion.complete(PendingDeletion.java:340)
at atg.process.PendingWorkThread.run(ProcessManagerService.java:17169)
15:26:33,859 ERROR [ScenarioManager] Error while trying to complete pending oper
ation PendingDeletion[scenarioDeletion:4000001,/myscenario/custom.sdl,[Segment 1
],1345791144734]
atg.process.ProcessException: Null value for property "subject" of repository it
em individualScenario:12000008
at atg.process.ProcessUtils.getNonNullPropertyValue(ProcessUtils.java:21
1)
at atg.process.ProcessManagerService.getSubject(ProcessManagerService.ja
va:3093)
at atg.process.ProcessManagerService.deleteIndividualInstance(ProcessMan
agerService.java:3288)
at atg.process.ProcessManagerService.deleteBatch(ProcessManagerService.j
ava:3330)
at atg.process.PendingDeletion.complete(PendingDeletion.java:340)
at atg.process.PendingWorkThread.run(ProcessManagerService.java:17169)atg.process.ProcessException: Null value for property "subject" of repository item individualScenario:This signifies that the subject property for your individual scenario is not referring to any user profile item which should not be the case. It could be because when your scenario is getting triggered there is no current user profile available. You will have to check your scenario definition segments that you have defined and the conditions when it is getting triggered.
ATG scenarios are based on the concept of state machines. Scenario manager maintains state information for every individual profile going through each of the scenario segment and each user's state is stored in the profile repository in "scenarioInstances" property. "scenarioInstances" contains a set of individual scenario instances (repository items of type "individualScenario") which are currently associated with that user. "individualScenario" item has a subject property which points back to the "user" repository item. And in your case some segment of your scenario is getting triggered when subject is not available.
Maybe you are looking for
-
[Error running JSP portlet in JDeveloper
I'm writing a JSP portlet with JDeveloper 9.0.3. The "index.jsp" works OK, and I can see the registration URL for my new provider. I deploy the application to Oracle9iAS 9.0.2.0.1 Application Server succesfully throught DCM servlet, register the new
-
Hi friends, I am planning to have a wireless environment for a corporate company. I would like to have a Cisco wireless LAN controller 2100 series and 15 numbers of cisco aironet 1142 n access point. Since wireless is gonna be a very important medium
-
Adobe Acrobat Standard Installation Manual
I am trying to do something very simple: Find an installation manual for Acobe Acrobat Standard. When I go to the Adobe site, here is what I'm trying to do: Go to Support & Learning -> I Need Help -> Products Choose Acrobat Click "Acrobat X Standard
-
I setup my 4 digit lock & now cannot login (thought it was what I wrote but not working; I have not synched my computer w/my Iphone in a long time- is restoring to factory settings the ONLY way to unlock this? (arrggghh). Any help is greatly apprec
-
Issue with Performance Point Filters and SSRS when visibility is toggled
I have a SSRS report that has the visibility toggled with the (+/-) sign. The report is SQL Server 2008 R2 / SharePoint Integrated in a SharePoint 2010 Site. The reports datasource is an Analysis Services database. I am displaying the report in a Per