Error while restoring 10.2.0.3 backup on 10.2.0.5

Hello,
I'm trying to restoring a production(10.2.0.3) backup on QA (10.2.0.5 which is a new host). I getting RMAN-06172 error.
Please help
I performed the following steps
RMAN> set dbid 19357374
executing command: SET DBID
RMAN> startup nomount
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\INITIFPRD.ORA'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area     159383552 bytes
Fixed Size                     2076008 bytes
Variable Size                 71303832 bytes
Database Buffers              79691776 bytes
Redo Buffers                   6311936 bytes
RMAN> show controlfile autobackup format;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
RMAN> set controlfile autobackup format for device type disk to 'E:\backup\IFPRD\controlfile_%F';
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
RMAN> restore spfile
2> to pfile 'E:\Restore_logs\QA1\initIFPRD.ora'
3> from autobackup;
Starting restore at 29-SEP-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=35 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day: 20130929
channel ORA_DISK_1: looking for autobackup on day: 20130928
channel ORA_DISK_1: looking for autobackup on day: 20130927
channel ORA_DISK_1: looking for autobackup on day: 20130926
channel ORA_DISK_1: looking for autobackup on day: 20130925
channel ORA_DISK_1: looking for autobackup on day: 20130924
channel ORA_DISK_1: looking for autobackup on day: 20130923
channel ORA_DISK_1: no autobackup in 7 days found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 09/29/2013 11:59:51
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece

FYI
E:\backup\IFPRD>dir
Volume in drive E is RAID 10 - Backup Disk Storage
Volume Serial Number is 1C61-8A8E
Directory of E:\backup\IFPRD
29/09/2013 02:27 AM    <DIR>          .
29/09/2013 02:27 AM    <DIR>          ..
27/09/2013 09:00 PM       302,893,568 BACKUP-IFPRD_26OKU840_1_1
27/09/2013 09:01 PM       297,117,696 BACKUP-IFPRD_27OKU84F_1_1
27/09/2013 09:08 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_10_1
27/09/2013 09:09 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_11_1
27/09/2013 09:10 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_12_1
27/09/2013 09:11 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_13_1
27/09/2013 09:11 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_14_1
27/09/2013 09:12 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_15_1
27/09/2013 09:13 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_16_1
27/09/2013 09:14 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_17_1
27/09/2013 09:14 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_18_1
27/09/2013 09:15 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_19_1
27/09/2013 09:02 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_1_1
27/09/2013 09:15 PM       693,723,136 BACKUP-IFPRD_28OKU851_20_1
27/09/2013 09:02 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_2_1
27/09/2013 09:03 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_3_1
27/09/2013 09:04 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_4_1
27/09/2013 09:05 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_5_1
27/09/2013 09:05 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_6_1
27/09/2013 09:06 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_7_1
27/09/2013 09:07 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_8_1
27/09/2013 09:08 PM     5,368,709,120 BACKUP-IFPRD_28OKU851_9_1
27/09/2013 09:15 PM         1,227,264 BACKUP-IFPRD_29OKU90C_1_1
27/09/2013 09:16 PM        24,870,912 CONTROLFILE_C-19357374-20130927-00
29/09/2013 02:27 AM    <DIR>          IFPRD-092713
27/09/2013 09:16 PM        24,788,992 SNAPCF_IFPRD.f
              25 File(s) 103,350,094,848 bytes
               3 Dir(s) 1,674,269,405,184 bytes free
E:\backup\IFPRD>
also i have tried this
RMAN> restore spfile to pfile 'E:\Restore_logs\QA1\initIFPRD.ora' from 'E:\backup\IFPRD';
Starting restore at 29-SEP-13
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 09/29/2013 20:36:21
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
RMAN>

Similar Messages

0xC0380013 error while restoring Windows Server 2008 R2 backup

Hello!
I have a Bare Metal Backup from phisical mashine with Windows Server 2008 R2 system. The machine has a 500GB disk with 200GB system volume. The disk is configured as dynamic.
I also have prepared Virtual Mashine with 600GB disk, where I want to restore the backup.
When I start procedure of restoring (using WinRE) i receive following error:
0xC0380013 "There is not enough usable space for this operation".
What is the reason of this error. How should I proceed to recover dynamic disk to virtual machine?
Thanks for your suggestions!

Hi,
On current situation, please refer to following KB and check if can help you.
"A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error message when you install Windows
In addition, please check your system BIOS settings. Please refer to following thread and check if can help you.
A required CD/DVD drive device driver is missing.....
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error while restoring LMS 2.6 backup

I am getting following error while restoring ciscoworks lms 2.6 backup.
ERROR: doRestore of [Resource Manager Essentials] had some errors.
Check the log file for details
Please check attachment for restorebackup.log file

Looks like some sort of permissions problem or a file that is not found..
Are you administrator on the machine?
Does D:\WINDOWS\system32\cacls.exe exist?
[Sat Feb 6 17:04:29 2010] [ echo y| D:\WINDOWS\system32\cacls.exe backup\0\rmeng\tempDir /T /G Administrators:F casusers:F ]
Are you sure (Y/N)?The system cannot find the path specified.
ERROR: In executing echo y| D:\WINDOWS\system32\cacls.exe backup\0\rmeng\tempDir /T /G Administrators:F casusers:F
[Sat Feb 6 17:04:29 2010] ERROR: In executing echo y| D:\WINDOWS\system32\cacls.exe backup\0\rmeng\tempDir /T /G Administrators:F casusers:F
ERROR: Error in changing permission to backup\0\rmeng\tempDir.
[Sat Feb 6 17:04:29 2010] ERROR: Error in changing permission to backup\0\rmeng\tempDir
Cheers,
Michel

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

ORA-19870: error while restoring backup piece

RMAN> duplicate target database for standby;
Starting Duplicate Db at 30-06-2011 10:39:45
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=488 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 30-06-2011 10:39:45
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755169400_70rd79x9_.bkp
user interrupt received
ORACLE error from target database:
ORA-03114: not connected to ORACLE
File permission on the primary
[oracle@bnl11237dat01 MDM1]$ ls -l /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
-rw-rw-rw- 1 oracle oinstall 22216704 Jun 30 10:33 /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
We are getting the above error when creating the standby on different host to primary. Please can I know how to resolove this error.

Please copy the backup pieces and archivelogs from the target database to the standby database..Do remember that the location on the standby database node must be same as of the target database node..
For example : if the bkp pieces of target db node is on '/ora_backup/target_name/bkp' then the same locaiton must be created on standby
if the archivelogs of target db node is on '/ora_backup/target_name/arch' then the same location must be created on standby
Hope its clear.

Error while restoring back up

Hi Team ,
Facing below error, while restoring in SQL.please help
The media family on device 'C:\Test\fwsmall-12-3_supraekeybackup_virtusa.bak' was created using Microsoft Tape Format version 1.240. SQL Server supports version 1.0.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
-Kotamarthi

Hello,
Are you facing issue as mentioned in below article
http://blog.sqlauthority.com/2010/10/24/sql-server-corrupted-backup-file-and-unsuccessful-restore/
what does following return
restore verifyonly from disk='backup location'
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

HT201263 After following the steps above I get an error while restoring my Iphone. The error code is 1 or -1. Please suggest what should I do to resolve this problem

After following the restore steps. I get an error while restoring Iphone. error code is 1 or -1. Please suggest what should I do to resolve this problem.

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694

HT201210 ITUNE IS SHOWING AN ERROR WHILE RESTORING AND UPDATING MY IPHONE 3G 8GB

Itune is showing n error while restoring and updating my iphone please tell me now what to do

usama1133 wrote:
Itune is showing n error...
And this ERROR would be...?

TS3694 1015 error while restoring iPhone3G

Hi,
I was trying to restore my friends iPhone 3G which is stuck in connect to iTunes on the screen
when ever i try restoring it, it says 1015 error while restoring!!
Please Help!
Thanks

Your friend's iPhone is probably jailbroken. Error 1015 (from http://support.apple.com/kb/TS3694#error1015):
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Jailbroken phones can't be discussed in these forums as it is against the Terms of Use. You'll have to rely on Google to find solutions.

TS3694 I get an error while restoring, error unknown (1015) someone can help me with this problem?

I get an error while restoring, error unknown (1015) someone can help me with this problem?

is there a way to restore to the original? it is a fiends I phone and it was jailbroken, and it is giving her many problems, I look over the apple information but there is no steps to follow to fix this. do you have any idea

I get an error " error while restoring this iphone (-54)

I just updated my iphone to the latest software upgrade and now I keep getting an error that says "error while restoring this iphone (-54)" and when I try to sync it says it cant sync my iphone. I also lost all of my music that was on the phone before the upgrade. Before the upgrade I had no problems with syncing the phone with itunes. I am using Windows 7 on my computer.

Some error codes are not listed in ts3694 This is a networking error. So try this, On a pc>start>type"Cmd">Right click on the icon and click"Run as administrator">Type "netsh winsock reset" >Press enter> restart your computer.
On a mac, > Do the same thing But in terminal.

Error while restoring apple i phone

HI, I am not able to restore my contacts and my sms on the i phone 4 it shows an error while restoring apple i phone for i tunes its showing an error that i phone cannot back up without a verified email address n u knw what i have already done that several times please help.

Try the advice found here: http://support.apple.com/kb/TS3694#error2009

File System error while restoring a backup from analysis server to another

Hi
I have restored an analysis database backup to from server 1 (sql server 2008) to server 2(sql 2008) and its working fine
and now am trying to restore another database from analysis server server 3 (sql 2005) to server 2 (sql 2008 )but its giving error that
File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

Hi Maverick,
According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
step, please refer to the link below.
http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
Regards,
Charlie Liao
TechNet Community Support

Error while restoring the backup

HI,
We have taken the offline backup through BRtools but we have used rman to take the backup in init.SID.sap. We have succeeded in taking the backup of the database and it has saved in .S format. Now when we are restoring with Brrestore it is giving the below error. Can any one suggest how to restore the backup.
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: XID (DBID=3524048029, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN>
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: sid=143 devtype=DISK
RMAN>
changed backup piece available
backup piece handle=/archive/offLine/xid/beeqftcz/xid.data5.S recid=1314 stamp=735914182
Changed 1 objects to AVAILABLE status
RMAN>
released channel: ORA_MAINT_DISK_1
RMAN> 2> 3>
allocated channel: dsk
channel dsk: sid=143 devtype=DISK
Starting restore at 29-NOV-10
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/29/2010 07:25:24
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle/XID/sapdata2/xid_5/xid.data5
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0279E Return code from 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog': 0
BR0536E RMAN call for database instance XID failed
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0553E Restore from normal database backup using RMAN failed
BR0359E Restore of /oracle/XID/sapdata2/xid_5/xid.data5 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0278E Command output of 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog':
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Nov 29 07:24:00 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
connected to target database: XID (DBID=3524048029, not open)
using target database control file instead of recovery catalog
RMAN> *end-of-file*
RMAN>
host command complete
RMAN>
allocated channel: ORA_MAINT_DISK_1
channel ORA_MAINT_DISK_1: sid=141 devtype=DISK
RMAN>
changed backup piece available
backup piece handle=/archive/offLine/xid/beeqftcz/xid.data4.S recid=1307 stamp=735914046
Changed 1 objects to AVAILABLE status
RMAN>
released channel: ORA_MAINT_DISK_1
RMAN> 2> 3>
allocated channel: dsk
channel dsk: sid=141 devtype=DISK
Starting restore at 29-NOV-10
released channel: dsk
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/29/2010 07:25:24
RMAN-20201: datafile not found in the recovery catalog
RMAN-06010: error while looking up datafile: /oracle/XID/sapdata2/xid_4/xid.data4
RMAN>
Recovery Manager complete.
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0279E Return code from 'SHELL=/bin/sh /oracle/XID/102_64/bin/rman nocatalog': 0
BR0536E RMAN call for database instance XID failed
BR0280I BRRESTORE time stamp: 2010-11-29 07.25.33
BR0553E Restore from normal database backup using RMAN failed
BR0359E Restore of /oracle/XID/sapdata2/xid_4/xid.data4 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata2/xid_1/xid.data1 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata2/xid_2/xid.data2 from /archive/offLine/xid/beeqftcz failed due to previous errors
BR0359E Restore of /oracle/XID/sapdata4/xiddb_3/xiddb.data3 from /archive/offLine/xid/beeqftcz failed due to previous errors
Regards,
Manikanth.

Is your backup got completed succesfully?

Error While Restoring the Oracle Database using Cloud Backup

Hello,
I have been facing a serious error while oracle restoration. I have Backed up Complete Database. For Testing restoration, the DBA removed all the DBF, logs and Control File from there orignal Position.
He restarted the Database in "Startup nomount" mode. No i am not able to connect to target database from my Backup Server remotely.
Whenever i try to restore, it shows following error:-
***RMAN-04005: error from target database:***
***ORA-12528: TNS:listener: all appropriate instances are blocking new connections***
***ORA-12528: TNS:listener: all appropriate instances are blocking new connections***
***"ORA-12528: TNS:listener: all appropriate instances are blocking new connections***
I am using Oracle 11g R2 x64-bit database and on Windows Platform with Windows Server 2008 R2.
Can Anyone help me by connecting, rman to the remote target database when it is in nomount mode.
I am not able to connect the sqlplus remotely.\
Thanks in Advance...
Regards
Pravesh Upadhyay

Devika,
You have to stop all your adapters, your repository, close all IStudio client and stop all sessions connected to this schema before running the oaiimport.
If you don't do this the oaiimport will not work properly as the script will not be able to drop the user and will try to re-create existing objects.
Tip : use the following select to list the session using oaihub902 user (and get rid off them)
select username, count(*)
from V$session
where username in ('OAIHUB902')
group by username
order by count(*) desc, username
JL

Error while restoring 10.2.0.3 backup on 10.2.0.5

Similar Messages

Maybe you are looking for