Error while restoring an Appset using TCODE:UJBR

Hi,
I am trying to restore an Appset (which I took backup)using TCODE:UJBR. But evry time it throws me an error: Error Occured while creating Application RATE via admin API.
Please suggest how to approach.
Thanks

Hi Deepti,
Thanks for your response. I'm still getting errror even if I take the appset offline.
every time I'm getting this error with different application names.
I have also checked program UJA_DATA_CHECKER to check the data structure,evrything looks good.
Please suggest where do I look..
Thanks

Similar Messages

Error while doing BAPI extract using tcode RSCRM_BAPI

Hi,
I am trying to extract a OLAP Bex query into a table. However, I am getting the error message that
Error: Metadata for extract /BIC/0CZCARRYOVR is inconsistent
Error: Error 0 when generating from extract /BIC/0CZCARRYOVR
Where ZCARRYOVR is my extract table. What could be the reason?
What had happened is that I created this extract table before and then deleted it from SE11. But now I cannot create the table while extracting. If I give a brand new table name then it works fine. Is there any place where table metadata is stores. I checked TADIR table and there was no extry. I should have used SE14 and delete the table from database but cant use it now since the dictionary table doesnt exist.
thanks

Hi ,
I have the same issues. If you have solved the issues can you please let me know the solution for this.
Regards,
Varma

Error while restoring back up

Hi Team ,
Facing below error, while restoring in SQL.please help
The media family on device 'C:\Test\fwsmall-12-3_supraekeybackup_virtusa.bak' was created using Microsoft Tape Format version 1.240. SQL Server supports version 1.0.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
-Kotamarthi

Hello,
Are you facing issue as mentioned in below article
http://blog.sqlauthority.com/2010/10/24/sql-server-corrupted-backup-file-and-unsuccessful-restore/
what does following return
restore verifyonly from disk='backup location'
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

ORA-19870: error while restoring backup piece

RMAN> duplicate target database for standby;
Starting Duplicate Db at 30-06-2011 10:39:45
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=488 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 30-06-2011 10:39:45
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp
ORA-19505: failed to identify file "/dborafiles/mdm_bn/mdm/backup/MDM11_rgmg62jn_1_1.ctl_bkp"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755169400_70rd79x9_.bkp
user interrupt received
ORACLE error from target database:
ORA-03114: not connected to ORACLE
File permission on the primary
[oracle@bnl11237dat01 MDM1]$ ls -l /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
-rw-rw-rw- 1 oracle oinstall 22216704 Jun 30 10:33 /dborafiles/mdm_bn/mdm/orareco/MDM1/autobackup/2011_06_30/o1_mf_s_755174014_70rjqho8_.bkp
We are getting the above error when creating the standby on different host to primary. Please can I know how to resolove this error.

Please copy the backup pieces and archivelogs from the target database to the standby database..Do remember that the location on the standby database node must be same as of the target database node..
For example : if the bkp pieces of target db node is on '/ora_backup/target_name/bkp' then the same locaiton must be created on standby
if the archivelogs of target db node is on '/ora_backup/target_name/arch' then the same location must be created on standby
Hope its clear.

TS3694 1015 error while restoring iPhone3G

Hi,
I was trying to restore my friends iPhone 3G which is stuck in connect to iTunes on the screen
when ever i try restoring it, it says 1015 error while restoring!!
Please Help!
Thanks

Your friend's iPhone is probably jailbroken. Error 1015 (from http://support.apple.com/kb/TS3694#error1015):
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Jailbroken phones can't be discussed in these forums as it is against the Terms of Use. You'll have to rely on Google to find solutions.

I get an error " error while restoring this iphone (-54)

I just updated my iphone to the latest software upgrade and now I keep getting an error that says "error while restoring this iphone (-54)" and when I try to sync it says it cant sync my iphone. I also lost all of my music that was on the phone before the upgrade. Before the upgrade I had no problems with syncing the phone with itunes. I am using Windows 7 on my computer.

Some error codes are not listed in ts3694 This is a networking error. So try this, On a pc>start>type"Cmd">Right click on the icon and click"Run as administrator">Type "netsh winsock reset" >Press enter> restart your computer.
On a mac, > Do the same thing But in terminal.

Error while raising a invoice using VF01

Hi,
I am getting an error while raising a invoice using VF01.
Error as follows
RV_MESSAGE_UPDATE
Update was terminated
System ID....   TIP
Client.......   300
User.....   user1
Transaction..   VF01
Update key...   E66E6454075548D8922BAC091E81F0CB
Generated....   18.07.2007, 18:57:38
Completed....   18.07.2007, 18:57:38
Error info...   TD 443: WRITE_FORM
Pls help
Points will be rewarded.
Thanks

Hi,
This is an ABAP short dump. If you go through the error log, there will be a section where in you can see > What caused the problem.
Try to analyze this log and you can find a solution. Probably, you can also check whether there is any OSS note with this error message.
Thanks
Murali.

Error while creating interest rate instrument-Tcode-FTR_CREATE.

Error while creating interest rate instrument-Tcode-FTR_CREATE.
Thanks
Vikas

Hi Tushar
Please maintain the detail in TPM 32
Product category
Product type
General valuation class
Account assignment reference
Regards

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while refreshing BO objects using live office

Hi Forum,
We are getting below error while refreshing the data using Live Office plug-in on PPT.
“An error occurred while receiving the HTTP response to http://........ This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server.”
This error comes in exact 5 minutes.
The server name used for web service is from a clustered environment. When the individual node is used Live office refresh works fine but while using the generic name refresh fails.
Please provide your inputs.

Hi Honed,
Take the backup of dsws.properties file and do the following changes:
properties            values
domain               @<clustername>
session.timeout    value higher than 5 minutes
Below pdf can help you further:
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_wssdk_admin_en.pdf
Regards,
Yuvraj

Error while posting initial quantities using stocktaking template of DTW

Hi All,
I am getting this below error while posting initial quantities using stocktaking template of DTW.
Can not find this object in B1Application-defined or object-defined error65171
I am using B1 8.8 PL10 version. Below is my sample txt file data
ItemCode WarehouseCode Counted
ItemCode WarehouseCode Counted
CHA0002 1 500
CHA0076 1 4000
Any help is appreciated.
Regards,
Noor Hussain

Hi Gordon,
Thanks a lot for your time. I am able to post the quantities. Now please let me know how to update the item cost/price for these items using DTW ?
Regards,
Noor Hussain

HTTP error while downloading solaris patches using wget

Hello,
I am getting a HTTP error while downloading solaris patches using wget.
'Downloading unsigned patch 113096-03.
--2010-06-18 03:51:15-- http://sunsolve.sun.com/pdownload.pl?target=113096-03&method=h
Resolving sunsolve.sun.com (sunsolve.sun.com)... 192.18.108.40
Connecting to sunsolve.sun.com (sunsolve.sun.com)|192.18.108.40|:80... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: http://sunsolve.sun.com/pdownload.do?target=113096-03&method=h [following]
--2010-06-18 03:51:15-- http://sunsolve.sun.com/pdownload.do?target=113096-03&method=h
Reusing existing connection to sunsolve.sun.com:80.
HTTP request sent, awaiting response... 401 Unauthorized
Unknown authentication scheme.
Authorization failed.
Problem downloading 113096-03.
What am i missing here... The credentials to login to sunsolve are correct and are updated in the downloadpatch.sh script.
Please assist
Thanks
Sunny

Try download via browser url:
[http://sunsolve.sun.com/pdownload.pl?target=113096-03&method=h]
You need a valid support contract not just Sunsolve account for many patches.

Error while restoring an Appset using TCODE:UJBR

Similar Messages

Maybe you are looking for