Error while reversing document posted through cash desk
Hi,
I have posted a payment through cash journal/cash desk (FPCJ) and closed the the lot. Now I want to reverse the payment, however SAP function module 'FKK_CJ_PROHIBIT_RVRSL_OF_DOCS' is throwing an error - 'reversal not performed'. Does anyone know how to reverse a payment document posted through cash journal if it's lot has already been closed?
Thanks,
Suhas.
HI Ravi,
If a payment is posted through the FPCJ and lot is closed , payment cannot be reversed that's is standard functionality, there are lot of notes on this which gives you alternative steps that need to be taken.
check note 644870.
thanks,
Vikram
Similar Messages
-
UOM group error while material document posted throgh BDC( MB01)
Hi All,
we are facing issue while posting material through MB0-goods reciept
error "UOM group not maintaineed for 'XXXXX" material" for some line items,
and i have checked in material master data, UOM group not maintained for some material,
even after maintaind UOM group for those material's still we are facing same problem,
as i checked in BDC code there is no validation for UOM group,
if we posted same PO manual, document posted successfull,
please suggest me.....why this error message coming eventhogh UOM group mainted?
Regards,
Suresh.Dcheck this link:
Updating Function module for Material master (UoM)
BAPI for MIGO
cheers
Aveek -
Error while uploading document to service desk ticket
Hi all,
I get error while uploading document to ticket
Message No: SKWF_SDOKERRS119 .
If iam correct I have given all the required authorisation mentioned in security guide.
what could be the reason for this kind of behaviour
Best Regards,
Alokhi
what is your solman version? chk the sap note
[ Note 1401196 - Work Centers: attachment not saved in Incident Management|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1401196]
might be this helps,
[Message No: SKWF_SDOKERRS119|Message No: SKWF_SDOKERRS119]
jansi -
Error while Submiting Support message through Web browser
Hi Gurus
I am geting error while submiting Support message through Web browser i.e BSP . Please find the error message below
"Error: The system could not create the message because of an RFC connection "NONE " error Service-specific Csutomizing missing for transaction ZLFN"
Note: ZLFN is our Service Desk Message type.
Any ideas where i am doing wrong?
Points will be rewarded
Thanks
BhaskarHello,
check if when you configured your new transaction type ZLFN you have included a corresponding entry in view CRMC_SERVICE_H.
If the transaction type is missing in this view, you have this error.
Regards,
Raquel Cunha -
Issue while doing material posting through Usage Decision
Hi all,
I have an issue while doing material posting through Usage Decision. Please find below the details.
Inspection Lot 10000604689
Material 1730PCPBS.0031
Batch QP611097 GQ02
Out of total qty of 2100 we need to post the following
To unrestricted use 2,098
To sample usage 2
Following error appears,
Deficit of SL Stck.in qual.insp 1,638 NO : 1730PCPBS.0031 62GQ GQ02 QP611097
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 1,638 NO.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
I have checked that quantity 2100 of material 1730PCPBS.0031 is in QI stock. Kindly advice what is the issue and why we are getting the error?
Regards,
BrijeshHi Brijesh,
What is the status of inspection lot?
One of the possibilities I think could be inconsistencies between MM and QM.
Have a look on SAP note 48815- Checking possible inconsistencies between MM and QM.
Regards,
Anand Rao -
I am getting some errors while distilling the post script file.
I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
<PDFX ISO="15930-1:2001" COMPLIANT="true">
PDF/X Compliance Report
1. Summary
Warnings: The total found in this document was 0.
Violations: The total found in this document was 0.
No problems were found in the document.
This document passes PDF/X-1a:2001 compliance checks.
</PDFX>
Regards,
Jack@Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
Uwe -
Populate Tax Code in RKWA table while doing transfer posting through MIGO.
Hi All,
I have a requirement where for certain countries i have to pass the tax code to RKWA table while doing Transfer posting through MIGO transaction.
For certain countries which i have to pass the Tax code to RKWA table, basically will not be having the tax code. For this reason im looking for BADi/User exits where i can update the RKWA table with the tax code. If the tax code is not derived, im getting the error as 'No tax information found'.
Please suggest if any BADi/exits are available for this requirement.
Regards,
SantoshCheck the following SAP notes:
139176
579241
Regards,
Indranil -
Bussiness Place (BUPLA) in documents posted through REFX
Dear All,
The bussiness place is not getting updated in documents posted through REFX, even though their is a option to assign Section Code (SECCO) in Bussiness Entity Master data (from T.Code REBDBE) their is no feild available to assing the bussiness place. So do anybody have any solution to populate the bussiness place in documents while posting through REFX.
Regards
JKT.Hi,
Business place has to field by manually. But if you want you can restrict through Validation and substitutions. here what we are doing maintaing both section code and business place. what substitution we are created so far here when section code this one then business place is this. like that we are created.
Depend upon configuration you might be create any validation.
Hope this is clear, if yes assign points. Any problem revert me.
Regards,
Sankar -
Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: javax.xml.bind.JAXBContext
Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
Loader: oc4j:10.1.3
Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28 at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil.. -
Error while trying to post inbound idoc of message type COND_A
Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
MohitI do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated. -
Error while uploading document in Primavera portfolio management
Dear All,
I am getting error while uploading document with particular user in PPM
Error occur when I upload document and click on save button.
Error from log :
<Exception>
System.InvalidCastException: Specified cast is not valid.
at ProSight.Portfolios.Infrastructure.Database.IpsDataRow.getInt(DataColumn iColumn)
at ProSight.Portfolios.BusinessLogic.Infrastructure.Objects.psLinkObj.addNew(Int32 iUserID, Int32 iPortfolioID, Boolean isPortfolioLink, IpsDataTable iLinkRec)
at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenario.psTSTabset.update(Int32 iUserID, Int32 iFormsetID, Int32 iPortfolioID, Boolean iIsImmediate, psResultContainer iParam)
</Exception>
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:36.758" class="psTransactionalScenarioInterface" Method="handleException" Process="w3wp.exe (4236)" Client="">
Error in psTSFormset.update
<Exception>
System.InvalidCastException: Specified cast is not valid.
at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean, Boolean iDisableTransaction)
</Exception>
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:36.758" class="Transaction" Method="handleException" Process="w3wp.exe (4236)" Client="">
Unhandled Error GUID: a3640801-43cb-48d4-89b4-cede50780e47 \"File name: /Prosight/forms/saveForm.aspx\\nStack trace: at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.handleException(Exception iEx, String iAddionalMsg)\\r\\n at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean, Boolean iDisableTransaction)\\r\\n at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean)\\r\\n at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTSITabset.update(Int32 iUserID, Int32 iDashboardID, Int32 iPortfolioID, Boolean iIsImmediate, psResultContainer iParam)\\r\\n at ProSight.Portfolios.Server.Presentation.Logic.Forms.psPLForms.update(psResultContainer iResultContainer)\\r\\n at invoker137.Invoke(Object , Object[] )\\r\\n at Microsoft.JScript.JSMethodInfo.Invoke(Object obj, BindingFlags options, Binder binder, Object[] parameters, CultureInfo culture)\\r\\n at Microsoft.JScript.LateBinding.CallOneOfTheMembers(MemberInfo[] members, Object[] arguments, Boolean construct, Object thisob, Binder binder, CultureInfo culture, String[] namedParameters, VsaEngine engine, Boolean& memberCalled)\\r\\n at Microsoft.JScript.LateBinding.Call(Binder binder, Object[] arguments, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters, Boolean construct, Boolean brackets, VsaEngine engine)\\r\\n at Microsoft.JScript.LateBinding.Call(Object[] arguments, Boolean construct, Boolean brackets, VsaEngine engine)\\r\\n at ASP.forms_saveform_aspx.main()\\nError code: -1\\nError Reason: Specified cast is not valid.\\n\\n\", \"/ProSight\"
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:47.584" class="psException" Method="printException" Process="w3wp.exe (4236)" Client="">
Could not update form data
USERID: 422
DEADLOCK DETECTED: False
Kindly help.Hi,
chk ur authorizaion errors... su53 dump.
Thx,
waseem -
Error while converting document to html
"ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275"
I use the procedure to convert the documents if it is not already converted before using procedure as follows
PROCEDURE "STARDOC"."HTMLOUTPUT" (
"DOCID" IN NUMBER) IS
mklob clob;
doccount number;
errorcode number;
errormessage varchar2(200);
BEGIN -- executable part starts here
SELECT COUNT(document_id) INTO doccount FROM docviewhtml where document_id=docid;
--dbms_output.put_line(doccount);
if doccount=0 then
dbms_output.put_line('Document Not Found: Converting '||docid);
--If document is not found run document coversion routine
ctx_doc.filter('idxdocuments',docid, mklob,FALSE);
INSERT INTO docviewhtml(document_id, html) VALUES (docid, mklob);
COMMIT;
elsif doccount=1 then
--return;
dbms_output.put_line('Document Found');
--if document id found then return the document content
null;
else
--dbms_output.put_line('Error occured');
--need to deal with duplicate documents
null;
end if;
dbms_lob.freetemporary(mklob);
EXCEPTION
--rollback when an exception occurs
WHEN OTHERS THEN
errorcode:=SQLCODE;
errormessage:=SQLERRM;
dbms_output.put_line(sqlcode || ':' ||sqlerrm);
ROLLBACK;
LOGERROR(errorcode,errormessage);
END "HTMLOUTPUT";
i get the error when i convert large documents
"ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275"
Also if there are any converion errors while converting documents to html. how to find them is there a log o fany sort.
what is wrong. please help!
Message was edited by:
connect2sandeepYou free your temporary lob, but never create it.
-
Error while billing document releasing to accounting.
Hi Experts,
Please give me possible reasons for below error while billing document releasing to accounting.
"Valuation with material cost estimate: error with product "500258045"
Message no. KE350
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "BDE98561002" in plant "9856".
Display material (View: Costing)
The system looked for the material cost estimate using costing key "ZK1", as defined in the Customizing settings for CO-PA.
System Response
The document cannot be processed.
Procedure
Contact your system administrator".
I have checked CKR1 transaction there were no cost estimates with KF costing status.
NOTE: Material Ledger Activated.
Please suggest the possible reasons and what to check?
Regards
Chandra.Check the cost estimate that is mentioned against the Costing key ZK1 whether it exists in the system and as you are saying there seems to be no cost estimate for the said material.
Hence release the std cost estimate for the said materia using CK11n or CK40n -
'error while signing document'
i got this error ('error while signing document') on my 1st attempt to use the service. simple 4 page PDF, no doc. security, same error both b4 & after i edited my user profile (i filled in the missing details & changed the default signature image).
cheers,Hi,
I am also getting this error while attempting to sign a document. I have checked the first and name fields in my default signature profile for any non-English characters but I am still getting this error. I have also tested with a different signature profile with same results. Please advise if there are
other fields I need to check.
Thanks. -
Error while loading document when user executes IW32
we have brand new laptops and desktops installed SAP GUI 6.40 patch level 27 and microsoft office 2003.when the user tries to execute IW32 and click on the long text button.when we try to change the editor it is giving ERROR WHILE LOADING DOCUMENT
ERROR WHILE LOADING DOCUMENT
message no .sofficeintegration142
DIAGNOSIS
An internal error occured in the SAP Document Container Control while loading a document
PROCEDURE
If the error recurs,enter a problem message.There are notes relating to how to create the log file using the report SAPROFFICEINTEGRATIONTRACE1Hi Rajanarenderreddy,
Were you able to resolve your problem?
If so how? We have a customer that is experiencing the same problem.
Thank you for your feedback.
Br,
Tom.
Maybe you are looking for
-
MacBook Pro 15" Retina Screen Corruption on Wakeup
On numerous occassions when the Macbook Pro wakes from sleep, the retina screen display is corrupt and flashes requireing a re-boot of the machine via the power button. Screen shot below. The display is set to the scaled resoultion one "button" abo
-
Help with submit button, signatures and locking fields
https://acrobat.com/#d=sCcToPsLqquP0uePmVL1pQhttp://https://acrobat.com/#d=ZsRL5CeME*4iV3VHnvUFXw Well here's a doozy for ya. I have no idea what I'm doing as you will be able to see when you look at my form. What I want to happen is to have the user
-
Cluster nodes discover peers outside cluster domain
All, cross-posted from the ColdFusion Server Administration forum: I've run into an issue with CFMX7 clustering on a subnet with multicast disabled. In our configuration, we have two physical Windows Server 2003 Enterprise Edition servers hosting nin
-
Hi every one, Some one knows, how can I execute a RFC/BAPI since Oracle Forms? Thanks Eduardo Campos
-
htmlb:tree : Node IDs not unique - error handling
From an internal table of customers and contact persons, I made a tree using TVIEWNODE2 structure. Some of the customers are not having contact persons for which contact person ids are simply '00000000'. Thus these nodes may not be unique here. Someh