Error while running Batch Session for T.Code F.19
While processing T.Code F.19 in Batch Input Sessions, the log shows following error: "For document type SA, an entry is required in field Reference. Can anyone please help me resolve this issue?
Thanks in advance!
Regards,
AMD
Hi
If your Batch input data is very less, run in foreground and update it manually or
Goto GGb1 select Fi accounting and create substitution under header of the document and keep necessary settings like below
Prerequisite
BKPF-BUKRS = xyz AND SYST-TCODE = F.19 and SYST-UNAME = your user id
Substitution
BKPF-XBLNR = keep any default value
Reg
Vishnu
Similar Messages
-
Concurrent Manager encountered an error while running Oracle*Report for you
hi
our team is running a report.but encountered
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DELV_ID='8022'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.0.2 - Production on Mon Jun 21 11:26:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 451508.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 451508 on node DEMO at 21-JUN-2010 11:26:17.
Post-processing of request 451508 failed at 21-JUN-2010 11:26:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 21-JUN-2010 11:26:17
+---------------------------------------------------------------------------+how to solve it?when i am searching in this error in cmctl log there is nothing for it.
i have lnched a SR on this they told to run it by appsrwrun.sh.how to run this report by appsrwrun.sh??
rgrds
Edited by: new2appsdba on Jun 21, 2010 4:19 AMHi,
how do you suspect its a OPP related issue??what is OPP?
Enter value for request_id: 451508
old 5: AND fcpp.concurrent_request_id = &&request_id
new 5: AND fcpp.concurrent_request_id = 451508
REQ_ID NODE_NAME
LOGFILE_NAME
451508 DEMO
/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[demoap@demo ~]$ vi /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[6/20/10 1:37:36 PM] [main] Starting GSF service with concurrent process id = 94508.
[6/20/10 1:37:36 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[6/20/10 1:37:37 PM] [Thread-16] Service thread starting up.
[6/20/10 1:37:37 PM] [Thread-15] Service thread starting up.
[6/21/10 11:12:00 AM] [OPPServiceThread0] Post-processing request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Executing post-processing actions for request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Starting XML Publisher post-processing action.
[6/21/10 11:12:00 AM] [94508:RT451495]
Template code: WILPACKSLIP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 11:12:00 AM] [UNEXPECTED] [94508:RT451495] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451495.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:12:00 AM] [94508:RT451495] Completed post-processing actions for request 451495.
[6/21/10 11:22:27 AM] [OPPServiceThread0] Post-processing request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Executing post-processing actions for request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Starting XML Publisher post-processing action.
[6/21/10 11:22:27 AM] [94508:RT451505]
Template code: WILPACKSLIP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 11:22:27 AM] [UNEXPECTED] [94508:RT451505] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451505.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:22:27 AM] [94508:RT451505] Completed post-processing actions for request 451505.
[6/21/10 11:26:17 AM] [OPPServiceThread1] Post-processing request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Executing post-processing actions for request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Starting XML Publisher post-processing action.
[6/21/10 11:26:17 AM] [94508:RT451508]
Template code: WILPACKSLIP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 11:26:17 AM] [UNEXPECTED] [94508:RT451508] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451508.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:00:59 PM] [94508:RT451533] Completed post-processing actions for request 451533.
[6/21/10 12:17:51 PM] [OPPServiceThread0] Post-processing request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Executing post-processing actions for request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Starting XML Publisher post-processing action.
[6/21/10 12:17:51 PM] [94508:RT451573]
Template code: XXWEBB_EXP_INV
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[6/21/10 12:17:51 PM] [UNEXPECTED] [94508:RT451573] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451573.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:17:51 PM] [94508:RT451573] Completed post-processing actions for request 451573.
[6/21/10 12:19:19 PM] [OPPServiceThread0] Post-processing request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Executing post-processing actions for request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Starting XML Publisher post-processing action.
[6/21/10 12:19:19 PM] [94508:RT451577]
Template code: WILEXINVREP
Template app: ONT
Language: en
Territory: 00
Output type: PDF
[062110_121919525][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[062110_121919526][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[062110_121919526][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[062110_121919526][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=demo.webbindia.com)(PORT=1527)))(CONNECT_DATA=(SID=DEMO)))]
[062110_121919527][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[062110_121919527][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[062110_121919528][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[062110_121919528][][EXCEPTION] [DEBUG] [APPLTMP]:[/t01/demoap/inst/apps/DEMO_demo/appltmp]
[062110_121919528][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[062110_121919528][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.version]:[1.5.0_08-b03]
[062110_121919528][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[062110_121919528][][EXCEPTION] [DEBUG] [dbcfile]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[062110_121919528][][EXCEPTION] [DEBUG] [path.separator]:[:]
[062110_121919528][][EXCEPTION] [DEBUG] [APPLCSF]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[062110_121919528][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[062110_121919528][][EXCEPTION] [DEBUG] [user.country]:[US]
[062110_121919529][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[062110_121919529][][EXCEPTION] [DEBUG] [user.dir]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log]
[062110_121919529][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.5.0_08-b03]
[062110_121919529][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[30369]
[062110_121919529][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[062110_121919529][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[062110_121919529][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[062110_121919529][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919529][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[062110_121919529][][EXCEPTION] [DEBUG] [line.separator]:[
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[062110_121919529][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[062110_121919529][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919530][][EXCEPTION] [DEBUG] [cpid]:[94508]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[062110_121919530][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[062110_121919530][][EXCEPTION] [DEBUG] [java.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/t01/demoap/apps/tech_st/10.1.3/lib32:/t01/demoap/apps/tech_st/10.1.3/lib:/t01/demoap/apps/apps_st/appl/cz/12.0.0/bin:/t01/demoap/apps/apps_st/appl/iby/12.0.0/bin:/t01/demoap/apps/apps_st/appl/pon/12.0.0/bin:/t01/demoap/apps/apps_st/appl/sht/12.0.0/lib]
[062110_121919530][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[062110_121919530][][EXCEPTION] [DEBUG] [java.class.version]:[49.0]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Server Compiler]
[062110_121919530][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[062110_121919530][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-164.11.1.el5xen]
[062110_121919530][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[062110_121919530][][EXCEPTION] [DEBUG] [user.home]:[/t01/demoap]
[062110_121919530][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[062110_121919530][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
--------------------------------------------------------------------------------lots of lines ----------------------------------------
[GC 17474K->10837K(24648K), 0.0037890 secs]
[GC 17685K->11057K(24648K), 0.0035530 secs]
[GC 17905K->11271K(24648K), 0.0029030 secs]
[GC 18119K->11488K(24648K), 0.0024650 secs]
[GC 18336K->11702K(24648K), 0.0023940 secs]
[GC 18550K->11919K(24648K), 0.0025010 secs]
[GC 18767K->12133K(24648K), 0.0024460 secs]
[GC 18981K->12344K(24648K), 0.0024020 secs]
[GC 19192K->12575K(24648K), 0.0024790 secs]
[GC 19423K->12781K(24648K), 0.0025650 secs]
[GC 19629K->12991K(24648K), 0.0024010 secs]
[GC 19839K->13212K(24648K), 0.0024430 secs]
[GC 20060K->13427K(24648K), 0.0024160 secs]
[GC 20275K->13641K(24648K), 0.0024440 secs]
[GC 20489K->13857K(24648K), 0.0024410 secs]
[GC 20705K->14073K(24648K), 0.0024570 secs]
[GC 20921K->14284K(24648K), 0.0024340 secs]
[GC 21132K->14504K(24648K), 0.0024580 secs]
[GC 21352K->14719K(24648K), 0.0024620 secs]
[GC 21567K->14935K(24648K), 0.0024600 secs]
[GC 21783K->15151K(24648K), 0.0024360 secs]
[GC 21999K->15365K(24648K), 0.0024180 secs]
[GC 22213K->15004K(24648K), 0.0204220 secs]rgrds
Edited by: new2appsdba on Jun 22, 2010 1:43 AM
Edited by: new2appsdba on Jun 22, 2010 2:12 AM
Edited by: new2appsdba on Jun 22, 2010 5:37 AM -
Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith -
Error while running a BDC for the Transaction F-02
Hi,
I'm getting an error <b><i>"Parking not possible during Batch Input"</i></b> while running a BDC for the transaction F-02.
When i click on the error message it displays the message [b<i>]"In Customizing, you can control whether an error message is issued."</b></i>
How to solve this issue?.
Waiting for ur replies.........
Regards
N.SenthilHi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards -
Error while running batch update statement
Hi
We are experiencing the below error while running the batch update statement where in the IN clause have more than 80,000 entries. The IN clause is already handled for max 1000 values so it has multiple or clause
like update...where id in (1,2...999) OR id in (1000,1001........) OR Id in ()...
Error at Command Line:1 Column:0
Error report:
SQL Error: ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code, arguments: [kghfrh:ds], [0x2A9C5ABF50], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [kkoitbp-corruption], [], [], [], [], [], [], []
00603. 00000 - "ORACLE server session terminated by fatal error"
*Cause: An ORACLE server session is in an unrecoverable state.
*Action: Login to ORACLE again so a new server session will be created
Is there a limitation of oracle or some bug?
Thankshttp://download.oracle.com/docs/cd/B19306_01/server.102/b14237/limits003.htm
The limit on how long a SQL statement can be depends on many factors, including database configuration, disk space, and memoryI think you're over this limit.
The only way is creating a temporary table with all the values and using
IN (select ...)Max
http://oracleitalia.wordpress.com -
Error while running Remote Manager for OIM11gR2
Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions?Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions? -
I am getting an error while running Batch input session.
While running BDC getting error that "Enter Discount Base, Automatic calculation not possible". I checked all the settings at company code level, tax code settings, document type settings. I am not getting it. While doing mannual posting the error is not coming.
Please help me on this.Hi,
While creating Material master sometime warning message will come for some materials . So while doing the LSMW Recording method it will record howmany times you are entering the "Enter" key also. So while doing batch input fome article it may stop at some point, so better run the LSMW in foreground and check were it stops exactly.
Regards
GK. -
ERROR WHILE RUNNING THE SESSION IN SM35
Hi all
when ever m running this session in SM35 , M getting error as :
"LEAVE TO TRANSACTION" MARA-BISMT is not allow
in batch input
REPORT YASEC_BDC_NIK_SESSION
no standard page heading
message-id zmm
line-count 65
line-size 150.
tables : mara.
*Top includr program
INCLUDE YNEW_MAIN_TOP.
*include yasec_bdc_nik_session_top.
***********selection screen *******************
selection-screen begin of block b1 with frame title text-001.
selection-screen skip.
PARAMETERS: p_ifile(128) TYPE c .
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: rad1 TYPE c RADIOBUTTON GROUP 1 USER-COMMAND gr1,
rad2 TYPE c RADIOBUTTON GROUP 1 .
SELECTION-SCREEN SKIP.
PARAMETERS: p_sess TYPE c.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK b1.
Subroutine call***************************
INCLUDE YNEW_MAIN_F01.
*include yasec_bdc_nik_session_f01.
*********At selection event triggered *************
at selection-screen on value-request for p_ifile.
To get F4 help for the input file path
PERFORM f_f4_input_file.
AT SELECTION-SCREEN ON p_ifile.
To validate and upload the input file
PERFORM f_load_file.
AT SELECTION-SCREEN ON p_sess.
To validate the Number of Sessions field
IF rad2 IS NOT INITIAL AND sy-ucomm EQ c_onli.
PERFORM f_check_sessions.
ENDIF.
***********Start of selection *******************
start-of-selection.
*To process BDC
PERFORM f_process_bdc.
TOP OF PAGE
TOP-OF-PAGE.
Writes the report heading and for displaying line number.
PERFORM f_report_header.
TYPES : BEGIN OF t_final,
matnr(50) TYPE c,
bismt(18) type c,
end of t_final.
TYPES: BEGIN OF t_fdata,
data(256) TYPE c,
END OF t_fdata.
TYPES: BEGIN OF t_error,
message(100) TYPE c,
END OF t_error.
*Internal table declarations
*Internal table to load the data from the file that is changed throgh BDC
DATA : i_final TYPE STANDARD TABLE OF t_final,
wa_final TYPE t_final.
*Internal table to store the error messages
DATA : i_error TYPE STANDARD TABLE OF t_error,
wa_error TYPE t_error.
*Internal table to load the raw data
DATA : i_fdata TYPE STANDARD TABLE OF t_fdata,
wa_fdata TYPE t_fdata.
*Internal table to store records of BDC
DATA : i_bdcdata TYPE STANDARD TABLE OF bdcdata INITIAL SIZE 0,
wa_bdcdata TYPE bdcdata.
Internal table to store BDC messages
DATA: i_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll INITIAL SIZE 0,
wa_bdcmsgcoll TYPE bdcmsgcoll.
VARIABLE DECLARATIONS
DATA: v_ifile TYPE string,
v_input TYPE i,
c_delimiter TYPE c VALUE 'X',
v_mode TYPE c VALUE 'A',
v_sessions TYPE i.
CONSTANTS
CONSTANTS : c_flagx TYPE c VALUE 'X',
c_slash TYPE c VALUE '/',
c_onli(4) TYPE c VALUE 'ONLI',
c_vl02(4) TYPE c VALUE 'VL02',
c_s TYPE c VALUE 'A'.
FORM f_f4_input_file .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_ifile.
ENDFORM. " f_f4_input_file
*& Form f_load_file
FORM f_load_file .
v_ifile = p_ifile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_ifile
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = i_fdata
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
*Text-103-Input file does not exist.
MESSAGE e000 WITH text-103 .
ELSEIF NOT i_fdata IS INITIAL.
DELETE i_fdata WHERE data = space.
DESCRIBE TABLE i_fdata LINES v_input.
ENDIF.
IF v_input EQ 0.
Text-104 - Input file is empty.
MESSAGE e000 WITH text-104 .
ENDIF.
ENDFORM. " f_load_file
*& Form f_check_sessions
FORM f_check_sessions .
IF p_sess IS INITIAL.
MESSAGE e000 WITH text-106.
ELSE.
v_sessions = v_input DIV p_sess.
ENDIF.
ENDFORM. " f_check_sessions
*& Form f_process_bdc
text
FORM f_process_bdc.
LOOP AT i_fdata INTO wa_fdata.
SPLIT wa_fdata AT cl_abap_char_utilities=>horizontal_tab
INTO wa_final-matnr
wa_final-bismt.
APPEND wa_final TO i_final.
CLEAR wa_fdata.
ENDLOOP.
IF rad1 = c_flagx.
PERFORM f_passbdc_vl02.
ELSEIF rad2 = c_flagx.
PERFORM f_sessions_vl02.
ENDIF.
ENDFORM. "f_process_bdc
To populate the Screen information
p_program Program Name
p_dynpro Screen Number
FORM bdc_dynpro USING p_program TYPE any
p_dynpro TYPE any.
CLEAR wa_bdcdata.
Populate the BDC structure with the Screen Information.
Move the Program name PROGRAM
wa_bdcdata-program = p_program.
Move the Screen Number DYNPRO
wa_bdcdata-dynpro = p_dynpro.
Indicate the beginning of a new screen
wa_bdcdata-dynbegin = c_flagx.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM. "f_bdc_dynpro
*& Form f_passbdc_vl02
text
FORM f_passbdc_vl02.
DATA: l_lines_im TYPE i.
SORT i_final BY matnr ASCENDING.
CLEAR wa_final.
LOOP AT i_final INTO wa_final.
CLEAR: i_bdcmsgcoll[],
wa_bdcmsgcoll,
wa_bdcdata.
CLEAR: i_bdcdata[].
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
wa_final-matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MARA-BISMT'.
perform bdc_field using 'MARA-BISMT'
wa_final-bismt.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM02'.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM03'.
CALL TRANSACTION 'MM02' USING i_bdcdata
MODE v_mode
UPDATE c_s
MESSAGES INTO i_bdcmsgcoll.
If error occurred in call transaction 'VA02' then stores all
information of failed records into internal table i_error_im.
IF sy-subrc NE 0.
DESCRIBE TABLE i_bdcmsgcoll LINES l_lines_im.
CLEAR wa_bdcmsgcoll.
READ TABLE i_bdcmsgcoll INTO wa_bdcmsgcoll INDEX l_lines_im.
To capture success and error messages in BDC.
CALL FUNCTION 'FORMAT_MESSAGE' "#EC *
EXPORTING
id = wa_bdcmsgcoll-msgid
lang = wa_bdcmsgcoll-msgspra
no = wa_bdcmsgcoll-msgnr
v1 = wa_bdcmsgcoll-msgv1
v2 = wa_bdcmsgcoll-msgv2
v3 = wa_bdcmsgcoll-msgv3
v4 = wa_bdcmsgcoll-msgv4
IMPORTING
msg = wa_error-message
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ELSE.
WRITE: text-111 COLOR 7.
ENDIF.
CLEAR: wa_final.
REFRESH i_bdcdata.
ENDLOOP.
ENDFORM. "f_passbdc_va02
*& Form bdc_field
text
-->P_FNAM text
-->P_FVAL text
FORM bdc_field USING p_fnam TYPE any
p_fval TYPE any.
CLEAR wa_bdcdata.
Populate the Field Name
wa_bdcdata-fnam = p_fnam.
Populate the field value
wa_bdcdata-fval = p_fval.
APPEND wa_bdcdata TO i_bdcdata.
ENDFORM. "f_bdc_field
*& Form f_sessions_vl02
text
FORM f_sessions_vl02 .
DATA: l_sindex TYPE sy-tabix VALUE 1,
l_eindex TYPE sy-tabix,
l_flag TYPE c VALUE space.
l_eindex = v_input.
SORT i_final BY matnr ASCENDING.
DO p_sess TIMES.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = 'Y_VL02_NIK'
user = sy-uname
keep = c_flagx
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR wa_final.
CLEAR: i_bdcdata[].
LOOP AT i_final INTO wa_final FROM l_sindex TO l_eindex .
IF l_flag = v_sessions.
CLEAR l_flag.
EXIT.
ENDIF.
l_flag = l_flag + 1.
CLEAR: i_bdcdata[].
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
wa_final-matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MARA-BISMT'.
perform bdc_field using 'MARA-BISMT'
wa_final-bismt.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM02'.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM03'.
l_sindex = l_sindex + 1.
ENDLOOP.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDDO.
ENDFORM. " f_sessions_vl02
*& Form f_report_header
FORM f_report_header .
FORMAT COLOR COL_HEADING INTENSIFIED ON.
ULINE.
text-201 - Company: Carrier
text-102- Batch Data Communication.
text-202 - System: SAP
WRITE: /1 sy-vline,
3 text-201,
50 text-102,
100 text-202,
AT sy-linsz sy-vline.
text-203 - Program:
text-204 - Date/Time:
WRITE: /1 sy-vline,
3 text-203, sy-repid ,
100 text-204,sy-datum ,c_slash, sy-uzeit,
AT sy-linsz sy-vline.
text-205 - User ID:
text-206 - Page:
WRITE: /1 sy-vline,
3 text-205, sy-uname,
100 text-206, sy-pagno,
AT sy-linsz sy-vline.
FORMAT COLOR OFF.
ULINE.
ENDFORM. " f_report_header
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = i_bdcdata
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE: / text-109 ,wa_final-matnr,
text-110 .
ENDIF.
ENDFORM. "bdc_transactionplease check this
check all perform bdcfield correct or not....
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
wa_final-matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'MARA-BISMT'.
perform bdc_field using 'MARA-BISMT'
wa_final-bismt.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM02'.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM03'. -
Error while running awrrpt.sql for Automatic Workload Repository Report
Hi
I am trying to run awrrpt.sql.While running the query in sql*plus it ask me for file format then no of days
& then begin & end snapshot Id & then eventually the sql*plus session get closed . I am unable find
why sql*plus session getting closed automatically.Please tell me How to run awrrpt.sql to generate AWR reports. Please guide.1008032 wrote:
Dear
This is happen due to you are given the begin snap id and end snap id not between the shut down time .EX begin snap it at 12 am 1521 and you shut down at 12:30 am and you you give the 1:00 am snap id 1522 .That time system can not collect the statistics betwwn 1521 and 1522.
Or you should enable statistics_level parameter if it 11gr2 you should enable controlfile_management_pack _access='DIAGNOSTIC+TUNING'
issue not resolved please post your error..........
Thanks®ards
SS.vijaibabuI checked my statistics_level it shows value TYPICAL which I think is right.
SQL> sho parameter statistics_level
NAME TYPE VALUE
statistics_level string TYPICALAlso I given snap id which between single startup & shutdown still the problem is same sqlplus session get closed after asking for snal ids.
If error gets generated where it gets generated? -
Error while running batch in Hyperion Reports
Has anybody run accross this error while trying to run a batch in Hyperion Reports:
Unexpected Error creating query to datasource in createCubeViews:
The book the batch is running is big...Have you ever successfully scheduled a batch? Make sure the scheduled batch name does not contain an ampersand "&" symbol or an apostrophe/single tick symbol. Those cause batches to error out for us.
-Karen -
Error While Processing Batch Session in Background Mode
Hi,
I am creating batch input sessions for Transaction FB01. Each Batch Session will have multiple transactions for FB01. My Batch Session is getting created. But when i am trying to process that batch session in backgroung mode ( thru SM35 ), it is failing. The Error says "Transaction Error". And when i process the same session in foreground mode, it is getting successfully processed. Any suggestion in this will be very helpful.Hi,
Check in your program if you have properly handled the OK codes.after every transaction is complete the 'Back' button has to be triggered.That could be the reason it's working in FG mode and not BG mode.Generally,OK Code is '/EBCK'.This should work. -
Error while running batchdiagnostics.sh for AIA for Comms 2.0.1 installed
I read while going through a document that to check whether AIA installation was successful
1. User should run the $AIA_HOME/diagnostics/bin/batchdiagnostics.sh script. When completed the
output can be reviewed in $AIA_HOME/diagnostics/logs/BatchDiagnostics. Any errors in the error log
should be resolved and then the results log checked.
I am getting the following in the error log file.
Can anybody please help.
Error log file is location: $AIA_HOME/diagnostics/logs/Batch
File name :error_Batch.log
[2009-06-17T14:48:14.477+05:30] [aia] [NOTIFICATION] [] [diagnostics.error] [tid: 10] [ecid: 10.201.80.7:68702:1245230294333:0,0] Batch Errors[[
Test Name :: SOASuiteVersion
Error Log::
Test Start Time : Wed Jun 17 14:44:48 IST 2009
Error while fetching the Data Base schema Version and type
java.lang.RuntimeException: ORA-01017: invalid username/password; logon denied
at oracle.apps.aia.core.install.utilities.OraBpelSchemaVersion.getVersion(Unknown Source)
at oracle.apps.aia.core.diagnostics.tests.SOASuiteVersion.executeTest(SOASuiteVersion.java:129)
at oracle.apps.aia.core.diagnostics.tests.SOASuiteVersion.runBatch(SOASuiteVersion.java:46)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.executeBatchTest(AIADiagnostics.java:384)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.invoke(AIADiagnostics.java:56)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.main(AIADiagnostics.java:423)
Caused by: java.lang.RuntimeException: ORA-01017: invalid username/password; logon denied
at oracle.apps.aia.core.install.utilities.DBConnection.getConnection(Unknown Source)
... 6 more
Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:277)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:647)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:430)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.apps.aia.core.install.utilities.DBConnection.getBPELConnection(Unknown Source)
... 7 more
Test Name :: SeedData
Error Log::
Test Start Time : Wed Jun 17 14:46:17 IST 2009
java.util.zip.ZipException: No such file or directory
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:203)
at java.util.zip.ZipFile.<init>(ZipFile.java:84)
at oracle.apps.aia.core.install.utilities.DVMDiff.unzip(Unknown Source)
at oracle.apps.aia.core.diagnostics.tests.SeedDataDiagnostic.executeTest(SeedDataDiagnostic.java:90)
at oracle.apps.aia.core.diagnostics.tests.SeedDataDiagnostic.runBatch(SeedDataDiagnostic.java:35)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.executeBatchTest(AIADiagnostics.java:384)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.invoke(AIADiagnostics.java:56)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.main(AIADiagnostics.java:423)
java.lang.RuntimeException
at oracle.apps.aia.core.install.utilities.CompareListOfFiles.getFileNames(Unknown Source)
at oracle.apps.aia.core.install.utilities.CompareListOfFiles.compareFilesAndList(Unknown Source)
at oracle.apps.aia.core.diagnostics.tests.SeedDataDiagnostic.executeTest(SeedDataDiagnostic.java:105)
at oracle.apps.aia.core.diagnostics.tests.SeedDataDiagnostic.runBatch(SeedDataDiagnostic.java:35)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.executeBatchTest(AIADiagnostics.java:384)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.invoke(AIADiagnostics.java:56)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.main(AIADiagnostics.java:423)
Caused by: oracle.apps.aia.core.install.exception.DirectoryNotFoundException
at oracle.apps.aia.core.install.utilities.DirectoryIterator.<init>(Unknown Source)
at oracle.apps.aia.core.install.utilities.DirectoryIterator.getDirectoryIterator(Unknown Source)
... 7 more
java.lang.RuntimeException
at oracle.apps.aia.core.install.utilities.CompareListOfFiles.getFileNames(Unknown Source)
at oracle.apps.aia.core.install.utilities.CompareListOfFiles.compareFilesAndList(Unknown Source)
at oracle.apps.aia.core.diagnostics.tests.SeedDataDiagnostic.executeTest(SeedDataDiagnostic.java:143)
at oracle.apps.aia.core.diagnostics.tests.SeedDataDiagnostic.runBatch(SeedDataDiagnostic.java:35)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.executeBatchTest(AIADiagnostics.java:384)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.invoke(AIADiagnostics.java:56)
at oracle.apps.aia.core.diagnostics.AIADiagnostics.main(AIADiagnostics.java:423)
Caused by: oracle.apps.aia.core.install.exception.DirectoryNotFoundException
at oracle.apps.aia.core.install.utilities.DirectoryIterator.<init>(Unknown Source)
at oracle.apps.aia.core.install.utilities.DirectoryIterator.getDirectoryIterator(Unknown Source)
... 7 more
Result log file is location : $AIA_HOME/diagnostics/logs/Batch
Result file name : result_Batch.log
[2009-06-17T14:48:14.333+05:30] [aia] [NOTIFICATION] [] [diagnostics.result] [tid: 10] [ecid: 10.201.80.7:68702:1245230294333:0,0] Batch Results[[
Test Name :: SOASuiteVersion
Test Start Time : Wed Jun 17 14:44:48 IST 2009
Operating System Name : Linux
Operating System Version : 2.6.9-42.ELsmp
Operating System Architecture : i386
Application Server Name : oc4j_soa
Application Server Version : 10.1.3.3.0
Application Server Build Date : 070610
Error while fetching the Data Base schema Version and type
Error : ORA-01017: invalid username/password; logon denied
The following patches have been applied :
1) Patch 6503011 applied on Fri Feb 06 12:46:46 IST 2009
2) Patch 6502942 applied on Fri Feb 06 12:43:34 IST 2009
3) Patch 6499177 applied on Fri Feb 06 12:42:52 IST 2009
4) Patch 6484367 applied on Fri Feb 06 12:40:00 IST 2009
5) Patch 6443218 applied on Fri Feb 06 12:39:16 IST 2009
6) Patch 6367355 applied on Fri Feb 06 12:38:22 IST 2009
7) Patch 6311809 applied on Fri Feb 06 12:37:46 IST 2009
8) Patch 5515836 applied on Fri Feb 06 12:37:14 IST 2009
9) Patch 5473225 applied on Fri Feb 06 12:35:49 IST 2009
Test End Time : Wed Jun 17 14:45:09 IST 2009
Total Time Taken : HH:MM:SS.m : 0:0:20:431
Test Name :: SeedData
Test Start Time : Wed Jun 17 14:46:17 IST 2009
Error while exporting the seeddata
Error : No such file or directory
Error while comparing the DVMs
Error : null
Error while comparing the XREF files
Error : null
Test End Time : Wed Jun 17 14:47:30 IST 2009
Total Time Taken : HH:MM:SS.m : 0:1:13:54
Thanks,
Puja
Edited by: user2687719 on Jun 17, 2009 3:49 AMNever mind
I have figured it out.
I had to create few symbolic links under $HOME/Middleware
In particular Oracle_IDM1
The config.sh script is setting ORACLE_HOME based on pwd.
And pwd is returning the path of the linked directory and not $HOME/Middleware/Oracle_IDM1
Once I fixed the script to simple use the correct ORACLE_HOME, it finishes correctly -
Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm
Hi All,
I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
Failed to create the configuration database.
An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information: The given key was not present in the dictionary.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
Any ideas why this is happening?Hello together,
I get the same error mentioned above while running the configuration wizard.
My Serverenvironment:
- MS Server 2008 R2 Enterprise
- Virtual Machine (Host Machine also R2 Enterprise)
- SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
- Prerequisites installed without error (and current versions)
Error information:
"Failed to create the configuration database"
"An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
The given key was not present in the dictionary"
The logfile has the following entry:
7/2009 10:52:48 9 ERR Task configdb has failed with an unknown exception
12/07/2009 10:52:48 9 ERR Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Any suggestions?
Thanks
Christoph -
Error while running Background Sync for User, Roles
Hi All,
I get the below errors when i am scheduling background jobs for User and Role Sync
We have connected another system APO to GRC, we already have ECC running
for the APO system we used the connectors VirsaXSR3_01 (Metadata, model) for this
Any ideas why they are failing
Error while executing the Job:Interface Controller does not exist for Component Instance VirsaXSR3_01 in Component Usage VirsaXSR3_01
Error while executing the Job:type com.virsa.cc.modelvirsaxsr3_01.types.So_Text001 could not be loaded: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SL
ThanksHi All,
Thank you for your inputs, but i figured out the issue with the error,
Our basis folks actually made the mistake creating JCO's
They created VIRSAXSR3_02_METADATA & VIRSAXSR3_01_MODEL instead of VIRSAXSR3_01_METADATA & VIRSAXSR3_01_MODEL
this has been rectified and my background jobs run fine now.
Thanks -
Error while running saschinvoke program for running the ibots created.
Hi Experts,
I am trying to invoke an ibot job from the unix command line. But, it is erroring it out. Can any one please help why is this error.
[oracle@ginza oracle]$ cd OracleBI
[oracle@ginza OracleBI]$ cd server
[oracle@ginza server]$ cd Bin
[oracle@ginza Bin]$ ./saschinvoke -u Administrator/abc2008 -j 5
./saschinvoke: error while loading shared libraries: libnqschedulerobjects.so: cannot open shared object file: No such file or directory
[oracle@ginza Bin]$ ls -l saschinvoke
-rwxr-x--- 1 oracle oracle 511132 Jul 30 2008 saschinvoke
[oracle@ginza Bin]$ pwd
/sdb1/appl/oracle/OracleBI/server/Bin
Thanx
svr
Edited by: user8699680 on Sep 1, 2009 5:38 PMHi Experts,
Thanks for all your valuable inputs.
But still I have another problem in running my script. This time it is with the authentication. here is the log file
[oracle@ginza svr]$ ./autocache.sh
Oracle BI SASchInvoke
Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
Execution Error: [nQSError: 68019] Authentication Failed.job completed
[oracle@ginza svr]$ id
uid=501(oracle) gid=501(oracle) groups=501(oracle)
I am here trying to run the script with Oracle unix user with which the OBIEE has been installed on linux server. I had checked that, all the files and script has necessary permissions, but missing some authentication. For further information, my instanceconfig.xml file has the following contents... ( where cryptools has run and passphare is mentioned in the instanceconfig.xml file)
<CredentialStore>
<CredentialStorage type="file" path="/sdb1/appl/oracle/OracleBIData/web/config/credentialstore.xml" passphrase="ppsecret"/>
</CredentialStore>
Pls let me know you valuable inputs to resolve this issue.
Thanks
svr
Maybe you are looking for
-
Java client for calling a XI web service
Hello, does anyone have created a Java client with Apache Axis? I tried it and it works for web service which aren't provided by SAP XI, but if I use to call a XI web service something went wrong. The XI web service works. I tested it with XML Spy. I
-
How do i set up a 16/9 sequence.
I have shot in 16/9 with my Z1 and wish to edit in 16/9 also. How do iset up a sequence as 16/9. I selected anamorphic sequence and the footage in the viewer is 16/9 but once in the sequence it gets cropped when looking on my widescreen monitor. Any
-
Global Variable in Fox Code?
Via a Parameter Group, I am trying to copy existing records. During the copy I am trying to replace one characteristic with a sequencial number. However, during a single execution of the parameter group, the variable is being reset to it's initial
-
Hi! I'm trying to load dimensions by the OutlineLoad.bat to my planning app. Source import.csv file: Account, Parent, Alias: Default, Data Storage A1, Account, ,store A2, Account, ,store A3, Account, ,store A4, Account, ,store App name: Test Command
-
Mac or standard or upgrade version?
Hi, I am looking at buying Adobe photoshop and premiere elements software, but I'm confused by the term standard or upgrade version. I have a mac so should I just buy the mac version? Thanks for any help. Spud47