Error while running Configuration Wizard in SharePoint 2013: Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.

Hi Friends,
I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
in Central administration like adding new WSP, Updating WSP , I get same error.
Does any one have any Idea?
Regards
Gireesh Painuly

Posted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl

Similar Messages

Sharepoint 2007 list error - The '}' character, hexadecimal value 0x7D, cannot be included in a name. Line 1, position 440.

Hi Everyone,
We have a sharepoint 2007 deployment which in general has been fine since it was built.
Version is 12.0.0.6421 (MOSS 2007 SP2 (KB953334 & KB953338))
on a Windows 2003 R2 SP2 server.
We created a list a while back to store information for our servers but for some reason it now has an error.
the symptoms are:
1) Navigating to the list and choosing any view (a few custom views), we can see the data fine
2) Creating new items or modifying existing items brings up:
An unexpected error has occurred.
3) Trying to access the list settings brings up:
An unexpected error has occurred.
4) Using "view all site content" and clicking on the list brings up:
The '}' character, hexadecimal value 0x7D, cannot be included in a name. Line 1, position 440.
I've attempted to search for the error online but the error doesn't bring back anything specific to Sharepoint.
My gut feeling is either a corruption of the list or a user has entered an invalid character in one of the list entries, but I cannot amend the list in any way.
Ordinarily I would advise the user to re-create the list and enter the information from scratch, however this list contains alot of information and is crucial to the server teams documentation.
Does anyone have any ideas on where I should be focusing my search efforts? I did check the logs and couldn't see any obvious entries for this list.
Any assistance would be greatly appreciated.
Cheers,
Carl

Posted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl

Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm

Hi All,
I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
Failed to create the configuration database.
An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information: The given key was not present in the dictionary.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
Any ideas why this is happening?

Hello together,
I get the same error mentioned above while running the configuration wizard.
My Serverenvironment:
- MS Server 2008 R2 Enterprise
- Virtual Machine (Host Machine also R2 Enterprise)
- SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
- Prerequisites installed without error (and current versions)
Error information:
"Failed to create the configuration database"
"An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
The given key was not present in the dictionary"
The logfile has the following entry:
7/2009 10:52:48 9 ERR                    Task configdb has failed with an unknown exception
12/07/2009 10:52:48 9 ERR                    Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
   at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
   at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
   at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
   at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
   at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
   at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
   at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
   at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
   at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
   at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Any suggestions?
Thanks
Christoph

Import error while running configuration wizard for ESR setup

Hi, I am trying for this for last two days. but not able solve this.
I am getting the error at the final stage of the configuration
Error message is below
Importing XI content
Description
Exception in step "INVOKEIMPRTCNTNT"
Exception details : com.sap.aii.util.misc.api.ResourceException: Connection to system Integration Builder using application CMS-Transport lost. Detailed information: Error accessing "http://INLD50046921A:50000/rep/cmstransport/int?" with user "ESRCMSCE1". Response code is 500, response message is "Internal Server Error"
I tried two or three times I got the same error then i canceled.
Now I am not able to start the configuration process gain.
Any body who has completed the configuration process please help me in this.
Regards
Satya

Hi,
I think the problem can be solved by downloading from the marketplace and importing the content manually.
Here is a description of the process:
http://help.sap.com/saphelp_nwesrce/helpdata/en/44/5755451622311ee10000000a155369/content.htm
The exception was because we didnt have the needed files (correct me if I am wrong) (The import can be done before or after running the configuration wizard)
Best regards,
V S

Error to run Configuration Wizard weblogic 12.1.2 # error is java virtual machine launcher error could not create the java virtual machine

hi
Error to run Configuration Wizard weblogic 12.1.2
my system is windows xp by 2 gig ram
and jvm version
C:\Program Files\Java\jdk1.7.0_25\bin>java -version
java version "1.7.0_25"
Java(TM) SE Runtime Environment (build 1.7.0_25-b17)
Java HotSpot(TM) Client VM (build 23.25-b01, mixed mode, sharing)
how resolve this problem and how find log file weblogic to this error?

In user environments where the path to java is not already established as an system-level environment variable, the service is unable to determine where to find java and this error will occur.
This could occur, for example, in environments where there is more than one JDK installed, or where the default JDK is different from the JDK which needs to be used by WLS.
Try to set the environment variable in windows i.e JAVA_HOME=C:\Sun\Java\jdk1.7.xx.x. to point to jdk 1.7 and run the configuration wizard.
Hope it helps!!
Thanks,
Vijaya

Errors in few of the step while running configuration wizard for PI 7.0

hi all,
i have installed Netweaver 2004s (PI 7.0) quality. during installation i had chosen sld option to be my development system as i wanted to use just single SLD.
now for the post installation steps i had run Configuration wizard. i haven't yet implemented Note : 939592 : PI Usage configuration versus Central SLD as it says first i need to perform all CTC steps.
now in this i got error in few steps:
STEP1 : PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
the error was: CIM_ERR_FAILED: Object manager is not activated
PI_05_This wizard will configure the integration server for sld.
The error was:
Error: CIM_ERR_FAILED: User credentials are invalid or user is denied access
PI_09_This wizard will configure Role of Integration server
Not able to load function SXMB_SET_ROLE_TO_IS( Connect to SAP gateway failed).
What should i do?
Regards,
Priyanshu Srivastava

Hi Priyanshu,
"Object manager is not activated" simply means, that the SLD server is not started. So, please, first of all navigate to the SLD URL http://<host>:<httpport>/sld, login with an administrative SLD user -> Admininstration and push the star button.
Regards,
Blanca

Getting error while running SSRS report in SharePoint 2010

Hi,
I am getting below error while running a SSRS reports in SharePoint. Your help will be appreciated
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
Timestamp: Wed, 5 Nov 2014 11:58:42 UTC
Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 503
Line: 5
Char: 62123
Code: 0
Thanks,
Manjunath

Hi,
According to your post, my understanding is that you get error while running SSRS reports.
Basically, If the Request Management service is enabled, it manages all incoming requests by evaluating logic rules against the user requests in order to determine what\which action to take and which machine or machines (targets) in the farm should handle
the request.
By default the Request time out value for Request Management service are as follows,
RequestTimeout : 00:01:40
RequestExecutionTimeout : 01:00:00
So the error throws from RM service for those reports who take more than 1 minute to generate the report.
To solve this issue, we can stop the Request Management service.
Or increase the time out
value by making use of following PowerShell script.
$waUrl = "URLofWEbApp"
$wa = Get-SPWebApplication $waUrl
$rmSettings = $wa | Get-SPRequestManagementSettings
$req=$wa.RequestManagementSettings
$timeout2= New-TimeSpan -minutes 5
Sreq.Requesttimeout=$timeout2
$req.update()
For more information：
http://blogs.technet.com/b/sajiths/archive/2014/08/19/ssrs-reports-timed-out-with-39-503-39-error-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Facing error while creating PerformancePoint Dashboard in SharePoint 2013?

Hi All,
I am not able to create Performance Point Dashboard site in SharePoint 2013, while creating facing this error:
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however,
be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
How to fix this issue?
Thanks in advance

Hi Sam,
Please modify your web.config file to show error details in SharePoint as below:
Set customErrors mode to Off
Set SafeMode CallStack to true
Set compilation debug to true
For more information:
http://www.keremozen.com/2012/04/08/how-to-show-error-details-in-sharepoint/
http://www.ashokraja.me/post/Display-Stack-Trace-in-Sharepoint-2010.aspx
After modification, check the detail error message.
Regards,
Rebecca Tu
TechNet Community Support

Error While running Setup Wizard in SolMan Managed Systems

Hello,
I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
Any input?
Regards,
Ray
Failure with Message Server
An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
ted exception is:
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
connection has been established.)
Please check Message Server host/port, or enter the P4 ports in cluster table.

Hi furious
I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
after that you prepare your organization and It will works
cheers....................

Error while running Payment Wizard

Dear Friends,
While i m running payment wizard , I get a follong error in Recomondation Report( STEP 6 of 8).
<b>Error</b>-----
Number of document in payment is grater then then maiximum defined.
Need help urgently,
Thanks.

Dear Arpit,
What you have to do is go to
Administration>System Initialization>Document Settings>Per Document Tab>now select "Outgoing Payment" from the drop down list against to "Document" and now you have to enter the number in the box provided for "Maximum No. of Documents in Payment".
I hope this works for you.
good day

Sharepoint 2013: Workflow Error , while trying to publish a Sharepoint 2013 Workflow, from the Sharepoint Designer 2013

I don't know what might be wrong but I have tried everything possible I suppose.
Configuration: 1 App Server SharePoint Standard 2013 + SQL Server. On App Server, I have installed Workflow Manager as well.
Installed Sharepoint Designer 2013 on my laptop.
Before I was able to publish the workflows, but now it refuses, thwroing me the following error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.WorkflowCommunicationException: The request was aborted: The request was canceled. Client ActivityId : ac85cf9c-053a-e0db-1f47-608050559d31. ---> System.Net.WebException:
The request was aborted: The request was canceled. ---> System.ServiceModel.CommunicationException: There was an error reading from the pipe: The pipe has been ended. (109, 0x6d). ---> System.IO.PipeException: There was an error reading from
What I have tried so far:
a. Re-installed Workflow, Service Bus, Windows Fabric, Sharepoint Designer... no luck
b. Run the configuration script... -Force enabled... no luck
c. Remove WF Manager, SB, etc... Deleted all WF and sb Databases from SQL, and re-installed all icluding updates... no luck
d. Tried to run services using Farm account, still no luck.
e. All services on the Server are running as well
f. The workflow is checked that it is associated with the site collection.
I don't know what else to try... seems like I am experiencing unique issue here... please help!

One last thing I can suggest - In case if you have installed CU Update for WF manager 1.0 and service bus. Some time that creates problem, [Please take backup before make any changes] -
- Clear everything, WF config , SharePoint WF setting, un register WF from SP , You can delete and recreate WF service Apps
- IISreset at WF and SP server
- Uninstall CU update for Workflow manager 1.0 and Service Bus from WF server [Control Panel - Programs - Update], you can delete all update installed
- ReStart WF server
- Reconfigure WF manager , Test WF sites , should return XML
Get-WFFarm | ft HttpPort
- Reconfigure WF at SP , Make sure should have enough free memory
Register-SPWorkflowService –SPSite "http://SPsite/" –WorkflowHostUri "http://WFServer:12291" –AllowOAuthHttp
http or https , depend on your configuration
And retest from SPD again.
Good luck:)
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Error while opening Navigation setting is SharePoint 2013

Unable to View negation bar and Also unable to open NavigationSettings in the site Setting.
An error occured while rendering navigation for requested URL: /sites/PerformanceManagement. Exception message: Cannot open "/sites/PerformanceManagement/AFAQ_PerformanceManagementReports/MonthlyAppraizalSytemReport.rdl":
no such file or folder. Stack trace:    at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
   at Microsoft.SharePoint.Library.SPRequest.UpdateNavigationNode(String bstrUrl, Int32 lNodeId, DateTime dateParented, String bstrName, String bstrNodeUrl,
Object& pvarProperties, String& pbstrDateModified)
   at Microsoft.SharePoint.Navigation.SPNavigationNode.Update()
   at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.<>c__DisplayClass3.<UpdateNavigationNodes>b__1()
   at Microsoft.Office.Server.Utilities.Security.SecurityUtilities.RunWithAllowUnsafeUpdates(SPWeb web, Action secureCode)
   at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildrenInner(NodeTypes includedTypes)
   at Microsoft.SharePoint.Publishing.Navigation.PortalWebSiteMapNode.PopulateNavigationChildren(NodeTypes includedTypes)
   at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, Boolean trimmingEnabled,
OrderingMethod ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
   at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedTypes, NodeTypes includedHiddenTypes, OrderingMethod
ordering, AutomaticSortingMethod method, Boolean ascending, Int32 lcid)
   at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapNode.GetNavigationChildren(NodeTypes includedHiddenTypes)
   at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetChildNodes(PortalSiteMapNode node, NodeTypes includedHiddenTypes

Hello Yahiyalqbal,
Sounds like one of your navigation nodes is broken. If you are unable to access them via the user interface you could try PowerShell.
This thread has an example which might be useful:
http://sharepoint.stackexchange.com/questions/59175/top-site-navigation-broken-how-can-it-be-fixed
- Dennis | Netherlands | Blog |
Twitter

Error while running background deployment, program /SAPAPO/RMSDPDEP

Hi all,
For the second time in 3 months, I encounter this strange error while running a daily background deployment job, using program /SAPAPO/RMSDPDEP.
The job starts correctly and does a part of its job, but then interrupt with this message in the job log :
--> "no valid simulation guid" (class SAPAPO/OM_TS, n° 101)
--> "Unknown error" (class SAPAPO/OM, n° 100)
--> "Job cancelled after system exception ERROR_MESSAGE" (class 00, n° 564)
I just can't find any clue about what causes the problem...
Did anyone encounter that kind of difficulties before ? Any help would be usefull...
Thanks !
Fabrice

Hi Siva,
In this range of time, I effectively run 13 parallel deployment jobs, as follow :
n° 1, 2, 3, 4 and 5 : same location (factory 1) and each treats a products selection
n° 6, 7, 8, 9 and 10 : same location (factory 2) and each treats a products selection
n° 11 : all products of factory 3
n° 12 : all products of factory 4
n° 13 : all products of factory 5
A product can only be produced in a single location, so there might not have access concurencies during parallel jobs. Do you think it could be some kind of a technical problem (not enough process available ?). Note that the problem can't come from CPU, we use CPU auto-allocation, and it works well.
What do you think ?
Thanks
Fabrice

Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
Madhu

Hi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure

Error while running OBIA configuration configApps.bat

I am receiving error while running configapps.bat.
I have the following wnvironment installed:
64 Bit windows
Java 6 (JDK1.6.x)
Weblogic server 10.3.6 in software only mode
Ran OBIEE 11.1.1.7.0 RCU utility to create BIPLATFORM and MDS schemas.
configured OBIEE 11.1.1.7
Installed ODI 11.1.1.7 with All components and “Skip Repository Configuration”
Ran OBI Apps RCU to create schemas for:
ODI Master and Work Repositories (DEV_BIA_ODIREPO)
Oracle Business Applications Components (DEV_BIACOMP)
Oracle Business Analytics Datwarehouse (DEV_DW)
Update to MDS schema.
Installed BI Apps 11.1.1.7.1
Applied FMW Platform Patches
Updated BIACOMP Schema with ATGLite patch scripts
Everything was up and running until now, when i try to configure OBIA via running configApps.bat, it is getting stuck at ODI configuration.
Also the server seems to be going to idle/suspended state every now and after 5-6 mins of startup and i see this message repeated again and again in server log :
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Has anyone encountered this issue and any idea how to resolve this.
Appreciate any help in advance ...

The re-install has been successful. Didnt encounter any issues in any configuration.
However the waring still appears
<Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
Also in the log i am getting the following errors as well in the Weblogic server log
BEA -101020 Servelet failed with exception Java.lang.illegalstateexception: Cannot forward a response that is already committed
Oracle.as.management.mbeans.opmn OPMN.queryProcessStatus failed with the following exception oracle.as.management.opmn.optic.OpticBadConnectionException: Failed to create secure socket for OPMN
All patches were applied successfully, including weblogic one's.
Has anyone got any idea how to resolve these issues.
Thanks in advance.

Error while running Configuration Wizard in SharePoint 2013: Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.

Similar Messages

Maybe you are looking for