Error while running import package

Hi,
Transformation file was validated successfully. But after running import package i am having following error on MS-BPC-7.0.
Invalid character in the given encoding. Line 1, position 1.
When i try validate and process trans file i am having the following error message. But same data file and same trans file was working till couple of days ago. After that whatever changes i have made to file, i did revert them to have it working like beofre.
Warning: Some records were rejected.
Rejected records reference either calculated members or invalid members.
Actually rejected record is only, one, but even other data was not loaded.
Thanks in advance for sharing your ideas or similar experiences.
Thanks,
KK

Hi,
There is definitely some problem with one of the records there. Do you have header? What is the delimiter? Do you have the same delimiter in the transformation file? You need to take a look at all the possibilities.
Hope this helps.

Similar Messages

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Error While Running an Package in BPC 10

HI Experts,
while running an Package I am getting the Attached Error
I am not able to find the logs for that in the Backend
I have also attached the 2 POA profiles to the user in the back-end
Any inputs will be highly Appreciated
Regards
Bhupendra Arya

Hi Bhupi -
Go to SU53 T-code from the back end , you can find the authorization issues; It will clearly mention what authorizations are missing in Red.
Hope this helps!!!

Error while running the package .

guys,
i created a transformation file is succesfully completed . when i run the package it is showing the error
like
immediate run error while creating to run the package on the server
<appserverurl>>!cdata(http://localhost/osoft></appserverurl
Thanks,
Aj

Hi,
It looks like the server is sending the client an HTML file vs. the XML file it is expecting. Can you run a web trace on it like fiddler?
Cheers, Scott

"VS_NEEDSNEWMETADATA" error while running a package created from C# code

I have gone through most of the answers for similar questions here however none has resolved the issue. We have created a package using C# code which stages data from a source table to destination (ChildPackage.dtsx).
Source Table : RowKey, Col1, Col2
Destination Table : RowKey, Col1, Col2, RowID, RunID (RowID is an identity column in destination table and RunID is a derived column whose value is set using a variable)
This package runs fine when we execute it directly however, we run these packages from a master package (MasterPackage.dtsx). When we are trying to run the package (ChildPackage) from a MasterPackage we get an error:
[SSIS.Pipeline] Error: "Oledb Destination" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
We have tried setting DelayValidation to true for the ChildPackage and even tried setting the values for "ValidateExternalMetadata" for the source and destination component as "False" for the data flow task
of the ChildPackage.
There is no case difference between column names in source and destination and it runs fine when we run the ChildPackage directly.
The only additional task that the Master package performs is to generate and set a variable that is used as RunID value by the child package.
If we hardcode the RunID in the ChildPackage and run it directly, it runs fine.
The MasterPackage.dtsx is not created from code and has a step to run ChildPackage.dtsx. We generate the ChildPackage.dtsx from code and replace in original solution.
Any help would be appreciated.
Gaurav Agarwal

Where then this RunID is consumed?
Arthur My Blog
The RunID is set by the MasterPackage in a parameter, this parameter is used as value of derived column in the data transformation task of the ChildPackage.
As mentioned ChildPackage has a RunID column.
Gaurav Agarwal

Error while running CONSOLIDATION package

Hi all
I am getting error message during CONSOLIDATION package run time and the error message has been attached as blow
EEROR:
sFileContent><![CDATA[]]></sFileContent><ErrorMsg><![CDATA[ Cannot find document/directory]]></ErrorMsg>
Thanks in advance for your help
Ramana

Hi,
Please check if the scriptlogic file is properly saved and it has the same name as in the data manger (data manger--> advance).
Try doing a validate and save on your logic file.
regrads
SSC

Error while running import command

Hi all,when i am trying to run import from putty i am getting error import: unable to open X server `'..Can any one suggest me how to overcome this error?
import D:/OAF/jdevhome/jdev/myclasses/xxc/oracle/apps/po/student/webui/XXCStudentPG.xml -username apps -password aspM -rootdir D:/OAF/jdevhome/jdev/myclasses/ -dbconnection "(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=r12.prd.com)(PORT=1525))(CONNECT_DATA=(SID=VIS)))"I moved my class files to Java top and ran the above command,however i even tried running in the below format but to vain
import xxc/oracle/apps/po/student/webui/XXCStudentPG.xml -username apps -password aspM -rootdir /xxc/oracle/ -dbconnection "(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=r12.prd.com)(PORT=1525))(CONNECT_DATA=(SID=VIS)))"Any help is appreciated,
Thanks in advance!!

Hey Helios,it's not the problem with Linux Os.it's the command.The below command works fine
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxc/oracle/apps/po/student/webui/XXCStudentPG.xml -rootdir $JAVA_TOP -userId 1 -username apps -password aspM -dbconnection "(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=r12.prd.com )(PORT=1525))(CONNECT_DATA=(SID=VIS)))"Thanks for your reply

Error while running Import Items program

Hi All,
I am getting error message "Item Catalog Group Descriptive Elements Open Interface import completed successfully for all records in this record set." when i am submitting Import Items Seeded program.
data is loaded into master organization successfully but no records were created in child organizations.
Apps version is 11.5.10.2
The same program with same code ran successfully a week back.
Any help is appreciated.
Thank You..

Duplicate thread (please post only once).
Error after submitting Import Items Seeded Program
Re: Error after submitting Import Items Seeded Program

Error while running info package

Hi,
I am getting a error while loading the data till PSA.
Transfer structure field not contained in the data source.
Please suggest if any one know the solution to resolve this.
Regards,
Haritha

Hi,
The error is coming because you added some fields in communication structure which are not available in data source. Probably you have enhanced the data source and you added the enhanced object in communication structure but data source is not replicated to match with enhanced data filed.
Regards,
Kams

Privilege error while running dbms_wm package

Hi,
I just built an database server with window 2003, oracle 10.1.0.4 with 10.1.0.2 version of oracle workspace manager. I imported my database (with the same DB versions) however I'm not able to execute the dbms_wm commands. My test user has the wm_admin_role and is able to enable and disable versioning however, I can not create a workspace. I get the following error when I attempt to run dbms_wm.GrantSystemPriv logged in as any DBA user with wm_admin_role:
ora-20076: insufficient privileges to grant priv_ANY_WORKSPACE
ora-06512: at "SYS.LTPRIV"
ora-06512: at "SYS.LTPRIV"
ora-06512: at "SYS.LT"
I am able to select dbms_wm.getworkspace from dual and 'LIVE' workspace is returned. However, if I attempt to run dbms_wm.gotoworkspace('LIVE') it returns
ora-20122: workspace 'LIVE' does not exist
Any info is greatly appreciated...
TCT

Hi,
Were there any versioned tables in the original database that were being imported into your new database ? I can't say for sure based on the information that you provided, but I would guess that something happened during the import that left the database and/or workspace manager in an incompatible state. The fact that you can not even goto the LIVE workspace suggests that the basic metadata needed by Workspace Manager to function properly is not present.
If you are not importing any versioned tables into your new database, you may also be able to fix this by uninstalling workspace manager, and then reinstalling it.
If that is not possible, I would suggest filing a TAR on this as they would be better able to collect the necessary information needed to resolve the issue. This would include a log of the export/import as well as a trace of the GrantSystemPriv, GotoWorkspace procedures.
Regards,
Ben

Error while running UTL_MAIL package

SQL> conn system/sys@ORCL;
Connected.
SQL> @F:\oracle\product\10.2.0\client_5\RDBMS\ADMIN\utlmail.sql
Package created.
Synonym created.
SQL> @F:\oracle\product\10.2.0\client_5\RDBMS\ADMIN\prvtmail.plb
Warning: Package Body created with compilation errors.
Errors for PACKAGE BODY UTL_MAIL:
LINE/COL ERROR
319/5 PL/SQL: SQL Statement ignored
320/10 PL/SQL: ORA-00942: table or view does not exist
325/7 PL/SQL: SQL Statement ignored
326/12 PL/SQL: ORA-00942: table or view does not exist
Can any help on this?

SQL> conn sys/sys@ORCL as SYSDBA;
Connected.
SQL> @F:\oracle\product\10.2.0\client_5\RDBMS\ADMIN\utlmail.sql
Package created.
Synonym created.
SQL> @F:\oracle\product\10.2.0\client_5\RDBMS\ADMIN\prvtmail.plb
Package body created.
No errors.
SQL> GRANT execute ON utl_mail TO NIKHIL;
Grant succeeded.
SQL> disc
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> conn NIKHIL/NIKHIL@ORCL;
Connected.
SQL> ALTER SYSTEM SET smtp_out_server='72.167.238.201';
System altered.
SQL> DECLARE
2
3 vSender VARCHAR2(30) := '[email protected]';
4
5 vRecip VARCHAR2(30) := '[email protected]';
6
7 vSubj VARCHAR2(50) := 'Enter the subject here';
8
9 vMesg VARCHAR2(4000) := 'Enter the body';
10
11 vMType VARCHAR2(30) := 'text/plain; charset=us-ascii';
12
13 BEGIN
14
15 utl_mail.send(vSender, vRecip, NULL, NULL, vSubj, vMesg, vMType, NULL);
16
17 END;
18 /
DECLARE
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 97
ORA-06512: at "SYS.UTL_SMTP", line 139
ORA-06512: at "SYS.UTL_MAIL", line 405
ORA-06512: at "SYS.UTL_MAIL", line 594
ORA-06512: at line 15
mycmpny-- got some value which i have removed.

Error while excecuting of package in ODI 11.1.1.6

Hello Gurus,
We have migrated from ODI 10g (10.1.3.5) to ODI (11.1.1.6) using Upgrade Assistant utility.
After migration, for most of the interfaces , we are getting error while running a package
ODI-1228: Task <Interface_Name> (Integration) fails on the target MICROSOFT_SQL_SERVER connection ODI_Staging_DB.
Caused By: com.microsoft.sqlserver.jdbc.SQLServerException: Could not find server '#GLOBAL.ODI_Server' in sys.servers. Verify that the correct server name was specified. If necessary, execute the stored procedure sp_addlinkedserver to add the server to sys.servers.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseErrorhere, ODI_Server is name of global variable.
We tested the query on SQL server, it returns a hostname of database server.
Any idea what could be the issue ?
Thanks,
Santy.

Actually, I already have tried doing that. Is there any task we need to perform from database side ?
or do u think it would be issue with the JDBC URL that connects to SQL Server from Physical technology?
Thanks,
Santy

Error while running 'ldifde.exe' to import the schema file

Hello,
I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution.
Regards.
Ashane Deshapriya ( MCP )

Can you run these commands from an elevated powershell and try to install exchange.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
If that also fails please post the error.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Cannot overcome Exchange Server 2013 Install Error - "There was an error while running 'ldifde.exe' to import the schema file

Hello,
I am attempting to install Exchange 2013 on to a 2008R2 Server on a domain running 2008R2 DC's. I have worked every error resolution I can find, but I can't get past this error.
Error:
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema27.ldf")
" was run: "There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema27.ldf'. The error code is: 8224.
Any assistance is appreciated.

Are you running the installation from an ISO-file?
If so, then copy the files (preferably
Exchange 2013 w. SP1) to the local disk
and run the install with elevated privileges.
Martina Miskovic

Error while running FDM 11.1.2.2 Import

I am getting below error while running FDM import:
Error - System.Runtime.InteropServices.COMException (0x80040211): Error executing rule. AIF_ODI_ERR:ODI-1424
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
What might be the reason for the error ? Please help.

Hi,
This could be due to mismatch of the installers you are trying to install on 64 bit Environment.
While performing an install make sure that you download and install only the 64 bit, some components may be generic though.
And also have you downloaded the EPM architect and EPM installer, not sure if they are available in the version (11.1.2) that you had mentioned.
But if there is one try to extract and see if that helps.
And also I am not sure if R2 is supported for your version (11.1.2).
Hope this helps,
Thank you,
Charles Babu J

Error while running import package

Similar Messages

Maybe you are looking for