Error while running Process Chain

Hello all,
I am getting following error while running the process chain.
"Process Activate ODS Object Data, variant PROCESS PSA_TO_ODS_ZFIGL_O1 has status Canceled (instance )".
Due to this others are get affected..
Plz provide solution.
amit

Hello all,
I am getting following error while running the process chain.
"Process Construct Database Statistics, variant DB_STAT_0PY_C02 has status Canceled (instance) ".
Due to this others are get affected..
Plz provide solution.
amit

Similar Messages

Error while activating Process Chains

Hi all,
while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
when i double click on the error msg, i got the following help msg: "
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.
Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
Points will be given
Thanks
Ganesh

Hi,
Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
OSS : 511475
Symptom
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
Other terms
RSPC065
Reason and Prerequisites
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
Solution
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions.
Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
BW 2.0B
 Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
BW 2.1C
 Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
BW 3.0A
 Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.

Error "Lock not set for: Generate index" while running process chain

SAP BI 7.0
SP 17
I am attempting to run a new process chain and the generate index steps are failing with the below errors:
"Lock NOT set forGenerate index"
"RSSM PROCESS INDEX terminated, because InfoCube/DSO object could not be locked."
The process chain just pauses. I let it finish once and it took 2 hours and then it gave the failure messages. I have looked in sm12 and can see the lock records when the process chain is running - unfortunately I can't make much of what's there - everything looks good to me. I also tried creating the indexes manually inside the cube and then re-ran, but still get the same error. Before running the process chain, I can get the indexes to check to green, but then after running the process chain they go back to red. I have attempted many things (including looking at other forum posts), but I still have the error. Please help. Thanks
Edited by: Brett Hutchinson on Feb 10, 2009 7:50 PM

Hello,
So Create index is getting failed in you PS right?
1)check if any other loads are running to the same CUBE(May be from other PC's also)
Goto Manage of the cube and check, some times it may happen if any Loads are running into cube I mean Load/DTP & roll up may be running.. if so wait till the others Loads(Jobs) get complete then Repeat the failed index
2) If the Create index is running for long time, then got RSDDV--> Select the CUBE then click on BIA index(Maintenance wizard), you can see a message if indexes are running , this will happen only when some one would have tried to generate the indexes manually and it may got failed due to some reason , since u are running it manually u couldn't identify whether it got failed or not unless you got to RSDDV and check. So delete the index here and then rebuild them through PC
Hope it helps!

Error while Executing Process chains

Hi All,
Initially i have created infopack with full load and Executed it manually, later i have changed same infopack to Delta load and kept in Process chains, when i execute the Process chains, the start Process have get triggred, but my Process stops at load data.when i have check the log file it is showing the Below Message:
"Message_Type_x" " "
"CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
In Sm37 it is showing
BI_PROCESS_TRIGGER is Finished
BI_PROCESS_LOADING is Cancled
Please help meto find out what might be the cause of this Error.
Note: The infopackage will get data from Generic data Source.
when i run the Process chains, the request is not going to R/3 Side.
Thanks and regards,
santosh.

Hi Santosh,
Go through this below note.
Note 852443 - Dump in include LRSSMU36/RSSM_OLTPSOURCE_SELECTIONS.
If Init is successfull then you can manually try the delta and check it.
Hope this helps
regards
KP
Asign points if helpfull

Invalid DataStore object name error when running process chain after EHP1

Hello,
We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
Many Thanks,
Al

Hi,
Please implement OSS 1345331.
If this does not help try the below steps:
1. Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a
       particular PSA table for finding the inconsistencies.
2.   After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
3. 'SAP_PSA_PARTNO_CORRECT' in repair mode for the
      PSA tables. Run the report again after this
4. 'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to
     double check that the invalid partitions are
     corrected.
     Once this is done you can execute the report
     'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
-Vikram

Error when run Process Chain via BPC NW

Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
Adriano

Hi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano

Error while starting process chain

Hi BW Gurus,
I am facing a different error while trying to start a process chain in BW.
Error message below:
Job started
Step 001 started (program RSPROCESS, variant &0000000000306, user ID BWBATCHJOB)
NO_MORE_SPACE: Can not create MTE: no more space: no more MESSAGE_CONTAINER slots available
Process CHAIN, variant ZSD_ORDER is not scheduled waiting for event RSPROCESS 3W6KED9SDRAN457HSX3XR22W2
Job cancelled
Please help.
Thanks and Regards
Chakri

Hi Girish mandli,
The process chain are scheduled from Basis side, i have checked with him, he told that, it scheduled with date and time.
It is daily load, should trigger at 2:00 am in morning, but from last 2 days it not scheduling.
Cause: there was unexpected DB shutdown, due to which all the jobs where canceled.
next day all the jobs got scheduled once DB was Up, due to which some jobs failed and manually scheduled failed jobs from BW side.
All the chains are triggering fine, but got only problem with this chain.
Please help to rectified this error.
Thanks and Regards
Chakri
Edited by: gopathi chakradhar on Jun 3, 2011 11:30 AM

"Error While creating Process Chain"

Hi all,
I am Creating a process chain in that I have to load from ODS to Cube,
If I include process types "Activate ODS" and "Update ODS" in process chain its Loading Delta from ODS to Cube, But my Requirement is to load FULL LOAD from ODS to Cube, If i select Full load infopackage from 8ZODS and place it in the chain after Activate ODS its giving errors as
Errors:
InfoPackage is generated; NOT able to be used as loading variant
A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_42622G5QGKNFH2LSX5PN6DAG6 in the chain
Please Guide me what to do? and Brief me the sequence to create a Process Chain(loading full and delta from ODS to Cube).
Thanks in Advance,
Sai

hi Sai ram...
Create a FULL Infopack by Copying the Full IP which was generated at the 8ZODS.
Sequence for full is.
1) start Process
2) LOAD IP
3)ACTIVE ODS
4)EXECUTE IP(Full IP which was copied)
For Delta
1) start Process
2) LOAD IP
3)ACTIVE ODS
4)Further Update Process type..(give the ODS name here from where u want to load to Cube.)
put the Indexes where ever nececssary ...
hope it helps
regards
AK
Thanks=points
Message was edited by:
A K

Error while creating process chain for flat file loading

Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
Mamta

Hi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan

Error while activating process chains from Business Content

Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
Vineeth

Hi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM

Error while running Process Order API to import orders - URGENT HELP NEEDED

Hi all,
I'm stuck with order import using OE_ORDER_PUB.PROCESS_ORDER api. Wanted to import a simple order in Vision database using the process order api. Figured out the right data to use, inserted into Headers and Lines Iface All tables. When calling the OE_ORDER_PUB.PROCESS_ORDER api, it is throwing this error:
"Header ID does not exist on this record or does not match ID specified on header record. You require a valid header ID if the operation is Create."
But when I validate the same record using the CORRECTIONS form in Order Import GUI, the order is successfully validated. Also the order is imported when I click the IMPORT button.
I understand that HEADER_ID column is not required for creating a new order, but not sure why it is erroring. Here is the data I'm using:
Insert into oe_headers_iface_all
(org_id, order_type_id, order_source_id, orig_sys_document_ref, ordered_date, request_date,
sold_from_org_id, sold_to_org_id, ship_from_org_id, ship_to_org_id, invoice_to_org_id,
CREATED_BY,CREATION_DATE,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN,OPERATION_CODE)
values (204, 1430, 1046, '101040', sysdate, sysdate, 204, 1004, 606, 1018, 1017, 0, sysdate, 0, sysdate, 0, 'CREATE');
Insert into oe_lines_iface_all
("ORDER_SOURCE_ID","ORIG_SYS_DOCUMENT_REF","ORIG_SYS_LINE_REF","ORIG_SYS_SHIPMENT_REF","ORG_ID","INVENTORY_ITEM","LINE_TYPE_ID",request_date,"SCHEDULE_DATE","DELIVERY_LEAD_TIME","ORDERED_QUANTITY","ORDER_QUANTITY_UOM",sold_from_org_id, sold_to_org_id, ship_from_org_id, ship_to_org_id, invoice_to_org_id,"UNIT_SELLING_PRICE","CREATED_BY","CREATION_DATE","LAST_UPDATED_BY","LAST_UPDATE_DATE","LAST_UPDATE_LOGIN","OPERATION_CODE")
values
(1046,'101040', '1', '1', 204, 'AS72111', 1427, sysdate, sysdate+1, 0, 10, 'Ea' ,204, 1004, 606, 1018, 1017,100,0,sysdate,0,sysdate,0,'CREATE');
Any help is appreciated.
FYI - this is a 11.5.10.2 version installed on Windows 2003 server.
Thanks in advance.
Jags

I might be late in replying, but hope it might help.
From your query it seems you are inserting records into interface tables and then calling process order API( probably from some PL/SQL block).
This is where I am confused, because I hope you understand, that interface tables are for use with Order Import concurrent Program, and for Process ORder API, you need to provide the data as parameter. The api has, header record type and line table type as parameters. So you need to assign correct data to these variables and pass them as parameter when you are calling Process Order API.
If you are doing the same thing, then post the exact pl/SQL code and error message from the API. That might help diagnose the issue.
Regards,
Nitin Darji

Error while running the process chain

Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amit

hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM

RFC ERROR while running BI Process Chain

I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
Thanks

This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

Error running process chain

Hi,
wehn we run process chain , the result from optimizer log showing error indicator , we check the abap run time using ST22 and discovered the message
DBIF_DSQL2_SQL_ERROR
what the message try to tell us , how to troubleshoot it .?
thanks

Hi AF,
try to look on SAP notes 978417 - Latch Monitor and Table Access Monitor: DBIF_DSQL2_SQL_ERROR. I guess this will solve your problem. It states also here on how you fix the issue.
Let me know if this make sense. Have a nice day!
Regards,
SASJr

ERROR while running attribute change run.

hi sap xperts,
I got an error while running the attribute change run in a process chain.
At first i got an error "The action is locked by a change run"
SO I DID THE FOLLOWING STEPS.
1.RUN ATTRIB CHANGE RUN MANUALLY IT RUN SUCCESSFULLY,but the process chain is still red.
Q1.Is there any way to link the manually run attrib chnage to process chain so that the process chain becomes Green?
2.SM12 - realease the locks and right click the pc and repeat.It didn't work
Q1.While removing the locks what should we remove,bcoz i removed all the locks?
3.I again removed the lock and repeat the process but still i didn't work.Now its chowing "SQL ERROR OCCURED WHILE ACCESSING"
So the Process chain got stuck,Can any body help me to run the attrib chnage run.
If possible can anybody send the Process chain monitoring documents to my email id:
<email ID removed>
please.thanks in advance,i know how to say thanks in sdn.

At any point in time only one attribute change run can run in the system. The other ACR's will fail due to locks. In your case, to set the process chain to green, try the following steps.
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
The above steps will help you continue with the rest of the process chain (thus avoiding manual runs) but the failed step might still remain red. Hope this helps.

Error while running Process Chain

Similar Messages

Maybe you are looking for