Error while running runcluvfy.sh in 11gR2 on AIX
Hello
I am trying to install 11gR2 on AIX6.1.While executing runcluvfy.sh utility for H/w & OS configuration check,I am getting below error in private interconnect.
sh runcluvfy.sh stage -pre crsinst -n node1,node2
Performing post-checks for hardware and operating system setup
Checking node reachability...
Result: TCP connectivity check passed for subnet "200.2.186.0"
Interfaces found on subnet "200.22.103.0" that are likely candidates for VIP are:
node2 en0:200.22.103.111
node1 en0:200.22.103.110
Interfaces found on subnet "200.22.105.0" that are likely candidates for VIP are:
node2 en1:200.22.105.226
node1 en1:200.22.105.225
Interfaces found on subnet "200.2.186.0" that are likely candidates for VIP are:
node2 en2:200.2.186.11
node1 en2:200.2.186.10
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Result: Node connectivity check passed
Regards,
Ajitesh
Hi,
All host names must conform to the RFC 952 standard, which permits alphanumeric characters. Host names using underscores ("_") are not allowed.
See Documentation Install:
http://download.oracle.com/docs/cd/E11882_01/install.112/e17210/preaix.htm#CEGFGHFE
Find Table 2-3 Manual Network Configuration Example
Regards,
Levi Pereira
Similar Messages
-
Error while running runcluvfy.sh(11g RAC on CentOS 5(RHEL 5))
Oracle Version: 11G
Operating System: Centos 5 (RHEL 5) : Linux centos51-rac-1 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:19:18 EDT 2009 i686 i686 i386 GNU/Linux
Question (including full error messages and setup scripts where applicable):
I am attempting to install oracle 11g in a RAC configuration with Centos 5 (redhat 5) as the operating system. I get the following error
ERROR : Cannot Identify the operating system. Ensure that the correct software is being executed for this operating system
Verification cannot complete
I get this error message when I run runcluvfy.sh, to verify the my configuration is clusterable. I don't know why.
I edited the /etc/redhat-release and entered echo "Red Hat Enterprise Linux AS release 4 (Nahant Update 7)" to attempt to fool the installer into thinking its red hat 4.
But still shows the same message.
Anyone knows how to fix this ?
Please help me.http://www.idevelopment.info/data/Oracle/DBA_tips/Linux/LINUX_20.shtml
runcluvfy.sh will not work on centos because the cluster verification utility checks the operating system version using the redhat-release packag and centos do this with his packages, so you must install and use redhat-release package
Get rpm-build to be able to build rpm’s:
[root@centos5 ~]# yum install rpm-build
Get source rpm of redhat-release
[root@centos5 ~]# wget ftp://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/os/SRPMS/redhat-release-5Server-5.1.0.2.src.rpm
Build package:
[root@centos5 ~]# rpmbuild –rebuild redhat-release-5Server-5.1.0.2.src.rpm
Install newly generated rpm:
[root@centos5 ~]# rpm -Uvh –force /usr/src/redhat/RPMS/i386/redhat-release-5Server-5.1.0.2.i386.rpm -
Error while running root.sh in 11GR2 2 node cluster
Hi Friends,
I am trying to setup 11gR2 2 node RAC on RHEL 4.7. The cluvfy script shows everything as passed and grid infrastructure installation completes fine until I ran root.sh script. The root.sh script when run on node 1 exits with following error in console
DOCRAC1-N310 []:./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:>ORACLE_OWNER= oracle
>ORACLE_HOME= /app/oracle/grid
>
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y>Copying coraenv to /usr/local/bin ...
>
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-01-06 13:20:18: Parsing the host name
2011-01-06 13:20:18: Checking for super user privileges
2011-01-06 13:20:18: User has super user privileges
Using configuration parameter file: /app/oracle/grid/crs/install/crsconfig_params
PROTL-16: Internal Error
Command return code of 41 (10496) from command: /app/oracle/grid/bin/ocrconfig -local -upgrade oracle oinstall
Failed to create or upgrade OLRWhen I checked the logs in $GRID_HOME/log/<Node1>/client
I can see errors in ocrconfig_12426.log as
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2011-01-06 13:20:19.133: [ OCRCONF][2564297536]ocrconfig starts...
2011-01-06 13:20:19.134: [ default][2564297536]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ OCRCONF][2564297536]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Error [4] retrieving configuration type
2011-01-06 13:20:19.134: [ OCRCONF][2564297536]Exiting [status=failed]...and in crsctl.log
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:01.372: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown status
2011-01-06 13:19:11.502: [ default][2566642592]utgdv: Could not find occonfig_loc property or ocrconfig_loc pointing to nothing
[ default][2566642592]Error retrieving OCR configuration. Return [4]. procr_get_conf rc [41] error buffer [Error retrieving ocrconfig_loc property.]
[ CRSCTL][2566642592]Command::initStatic: clsugetconf failed with return code 4, status 1
2011-01-06 13:19:11.503: [ CRSCTL][2566642592]Command::checkConfig: clsugetconf returned unknown statusI have tried to deinstall, reconfigure , but still no luck. I will be trying to use Oracle Deinstall utlity now. Before that I would like to get comments from experts
Thanks ,
SSN.Consider moving this question to the Real Application Clusters forum.
Confirm that +/app/oracle/grid/crs/install/crsconfig_params+ exists before running root.sh - if it does, please post contents using tags to encapsulate the config text data.
Are you using ASM for managing voting and OCR disk storage, or are you manually setting these to specific block devices? -
We are doing EBS R12.1.1 with 11gR2 database OS platform migration from Solaris Sparc 10(64 bit) to RHEL 5.6 (64 bit),
we are following Oracle documents :-
Export/import process for R12 using 11gR1 or 11gR2 [ID 741818.1]
Application Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]
We are facing issue during Application Tier Platform Migration for following step :-
Section 2: Migration Tasks >> 7.Run AutoConfig setup phase on the Target System
Executing script in InstantiateFile:
/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh
script returned:
adgenjky.sh started at Thu Aug 23 04:31:35 PDT 2012
Creating the key
Error while creating keys
Error while running keytool
adgenjky.sh finished at Thu Aug 23 04:31:36 PDT 2012
adgenjky.sh exiting with status 1
Log file is located at : /u01/app/applmgr/inst/apps/PRD_sebs01/admin/log/PRD_sebs01jkey.log
ERRORCODE = 1 ERRORCODE_END
.end std out.
/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh: line 192: createKeysCerUsingJava: command not found
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u01/app/applmgr/inst/apps/PRD_sebs01/admin/install
adgenjky.sh INSTE8_SETUP 1
AutoConfig is exiting with status 1
AutoConfig execution completed on Thu Aug 23 04:31:50 2012
Time taken for AutoConfig execution to complete : 0 mins 36 secs/u01/app/applmgr/inst/apps/PRD_sebs01/admin/install/adgenjky.sh: line 192: createKeysCerUsingJava: command not foundHave you sourced the application env file before running AutoConfig?
Did you complete all the steps in ([ID 438086.1]), under "Verify Source and Target nodes software versions" section?
Thanks,
Hussein -
Error while running Remote Manager for OIM11gR2
Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions?Hi,
I have 11gR2 Remote Manager configured in a Windows box on a different machine as OIM server. I am getting the below error while running the RM-
C:\RemoteManager\remote_manager>remotemanager.bat
C:\RemoteManager\remote_manager>set RM.ServiceName=RManager
C:\RemoteManager\remote_manager>set LIB_DIR=.\lib
C:\RemoteManager\remote_manager>set EXT_DIR=.\ext
C:\RemoteManager\remote_manager>set APPSERVER_TYPE=wls
C:\RemoteManager\remote_manager>set CLASSPATH=.;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\lib\xlDataObjects.jar;.\lib\log4j-
1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-logging.jar;..\..\oracle_common\mo
dules\oracle.jrf_11.1.1\jrf-api.jar
C:\RemoteManager\remote_manager>"C:/Program Files/Java/jdk1.7.0/bin/java" -cp .;.\lib\xlAPI.jar;.\lib\xlVO.jar;.\lib\xlScheduler.jar;.\lib\xlRemoteManager.jar;.\lib\xerces.jar;.\li
b\xlDataObjects.jar;.\lib\log4j-1.2.8.jar;.\lib\xlUtils.jar;.\lib\xlLogger.jar;.\lib\xlCrypto.jar;.\lib\iam-platform-utils.jar;.\lib\oimclient.jar;.\ext\spring.jar;.\ext\commons-lo
gging.jar;..\..\oracle_common\modules\oracle.jrf_11.1.1\jrf-api.jar -Dlog4j.configuration=config\log.properties -DXL.HomeDir=C:\RemoteManager\remote_manager com.thortech.x
l.remotemanager.RemoteManager
Feb 9, 2013 2:00:54 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger error
SEVERE: Class/Method: ConfigurationClient/init encounter some problems: Unable to encrypt the value for: #text
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMIClientSocketFactory/static: sslEnabled : trueSSLContextAlgorithm : TLSKeyManagerFactory : @keymgrfactoryKeyStore : C:\RemoteManager\remote_manager\config\def
ault-keystore.jksKeyStoreType : JKSTrustStore : default-keystore.jks
Feb 9, 2013 2:00:55 AM com.thortech.util.logging.Logger info
INFO: Class/Method: RMISSLServerSocketFactory/createServerSocket Remote Manager server socket port is 12346
Exception in thread "main" java.lang.NullPointerException
at com.thortech.xl.remotemanager.RMISSLServerSocketFactory.createServerSocket(RMISSLServerSocketFactory.java:173)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:667)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:317)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:236)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:411)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:147)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:207)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:310)
at java.rmi.server.UnicastRemoteObject.exportObject(UnicastRemoteObject.java:273)
at java.rmi.server.UnicastRemoteObject.<init>(UnicastRemoteObject.java:172)
at com.thortech.xl.remotemanager.RemoteManager.<init>(RemoteManager.java:80)
at com.thortech.xl.remotemanager.RemoteManager.main(RemoteManager.java:449)
C:\RemoteManager\remote_manager>
Any suggestions? -
Error while running code template mapping between two oracle tables
Hello All
Iam getting the following error while running code template mapping between two oracle tables. Using OWB 11gR2 and oracle 11gR2 DB.
java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
c: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Job 51 error: java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Quick help is highly appreciated.Dera Dallan
its only a target user for the workspace where you are deploying the mapping from.
I have two repositories for two different projects. each repositary has its own workspace.
ex:-
Project 1
Work space bpms_rep_owner
Repositary owner bpms_rep_owner
Repositary user bpms_rep_user
Project 2
Work space dem_rep_owner
Repositary owner dem_rep_owner
Repositary user dem_rep_user
Reg
S.Gyazuddin -
Error while running a Java Program
Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards -
Hi all,
I am getting this particular error while running a report. The error is:
<b>SQL Error: 604
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Diagnosis
This internal error is a targeted termination since the program has an
incorrect status.
Procedure
Analyse the situation and inform SAP.
Notification Number BRAIN 299 </b>
Could anyone tell me what that means?
Thanks In advance,
RajHi Raj,
There are a few OSS Notes for your issue.
If your Query has hierarchy in it then check 734184
If your query is based on Infoset then check Note 784502 and 701941.
Also check 668921.
Bye
Dinesh -
Error While Running a page on JDeveloper
Hi All ,
I am getting the following error while running a page in Jdeveloper . Can any body help me?
(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier ; (Could not lookup message because there is no database connection) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:888) at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:862) at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:980) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:352) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ## Detail 0 ## java.sql.SQLException: ORA-00904: "SERVERRESP_ENABLED_FLAG": invalid identifier at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134) at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289) at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583) at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1983) at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1141) at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2487) at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2854) at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:622) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:550) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1328) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getMultiSpecificProfileFromDB(ExtendedProfileStore.java:368) at oracle.apps.fnd.common.WebAppsContext.setProfileValues(WebAppsContext.java:4177) at oracle.apps.fnd.common.AppsContext.setDBEnv(AppsContext.java:3407) at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2508) at oracle.apps.fnd.common.AppsContext.getPrivateConnection(AppsContext.java:2398) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2257) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:2072) at oracle.apps.fnd.common.AppsContext.getJDBCConnection(AppsContext.java:1976) at oracle.apps.fnd.profiles.Profiles.getConnection(Profiles.java:2494) at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1304) at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:384) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfileFromDB(ExtendedProfileStore.java:210) at oracle.apps.fnd.profiles.ExtendedProfileStore.getSpecificProfile(ExtendedProfileStore.java:169) at oracle.apps.fnd.profiles.ExtendedProfileStore.getProfile(ExtendedProfileStore.java:148) at oracle.apps.fnd.common.logging.DebugEventManager.configureUsingDatabaseValues(DebugEventManager.java:1147) at oracle.apps.fnd.common.logging.DebugEventManager.configureLogging(DebugEventManager.java:1008) at oracle.apps.fnd.common.logging.DebugEventManager.internalReinit(DebugEventManager.java:977) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:944) at oracle.apps.fnd.common.logging.DebugEventManager.reInitialize(DebugEventManager.java:931) at oracle.apps.fnd.common.AppsLog.reInitialize(AppsLog.java:570) at oracle.apps.fnd.common.AppsContext.initLog(AppsContext.java:873) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:858) at oracle.apps.fnd.common.AppsContext.initializeContext(AppsContext.java:827) at oracle.apps.fnd.common.AppsContext.(AppsContext.java:686) at oracle.apps.fnd.common.WebAppsContext.(WebAppsContext.java:846) at oracle.apps.fnd.framework.server.OAUtility.getWebAppsContext(OAUtility.java:351) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(CreateIcxSession.java:144) at oracle.apps.fnd.framework.CreateIcxSession.createSession(CreateIcxSession.java:80) at runregion.jspService(runregion.jsp:96) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:534) ">check your DBC file, we have discussed this issue in the forum, search for SERVERRESP_ENABLED_FLAG
-
Error while running a KPI Watchlist in obiee 11g dashboard
I am getting the following error while running a KPI Watchlist :
*" Odbc driver returned an error (SQLExecDirectW) "*
I added two KPI's (KPI 1 & KPI 2)into that Watchlist , one from the default "Sample Sales Lite" (sub 1) and another from sub 2 which have essbase as data source .
KPI 1 (created from sub 1) is working fine , but while placing KPI 2 (created from sub 2 ) in the watchlist , its throwing the above error . However , while running KPI 2 individually , its showing meaningful results .
Let me know if the problem statement is not clear .
OBIEE version used : 11.1.1.5.0 .Could anyone reply this thread. I am also getting the same error . Even server logs are also not helping.
-
Error while running a customize report in oracle ebs
Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein -
Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
Missing class: javax.xml.bind.JAXBContext
Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
Loader: oc4j:10.1.3
Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28 at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil.. -
I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?
This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
Please enter a value and try to re-run Quick Pay. -
500 Internal server error while running sqlsrv_query in PHP
Hello everyone I am having a problem with sqlsrv_query I will be grateful to you please provide some help.
I am running a query through php:
$ls_parcel_query = "select * from ParcelDetail order by ExtractDate";
$result = sqlsrv_query($conn, $ls_parcel_query, array(), array("Scrollable"=>"keyset","QueryTimeout"=>300));
$no_of_rows = sqlsrv_num_rows($result);
echo "<br/>".$no_of_rows;
It gives (After 30 seconds):
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
I have php.ini settings like below:
max_execution_time = 90
memory_limit = 128M
While running this query in SQL SERVER 2008 R2, it successfully gives result in some times in 1 minute and sometimes in 2 minutes.Hello,
A 500 Error will be caused due to many reason.To troubleshooting this issue, you can try to check out the error log and get more information on what is causing the error.
Reference :
"500 Internal Server Error" while running PHP
HTTP Error 500 Internal server for php pages and solution
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill
Maybe you are looking for
-
How to add text to transparent gif?
Hi, I'm using Photoshop 6.01. with Windows 7 Professional. I have a transparent gif file, to which I want to add text, including bullets. The stuff I want to add is now on one of my webpages, and so is the gif, but I want to combine the image and t
-
Gnome-session warning filling up messages (nm-applet)
Hi, as soon as I try to connect in OpenVPN this loog keep floading Sep 13 15:55:24 blackbox gnome-session[419]: ** (nm-applet:620): WARNING **: Icon nm-vpn-connecting06 missing: (1) Error opening file: No such file or directory Sep 13 15:55:24 blackb
-
Has any of the following changed in 1.5....
Hi there fellow forumees. Just a quick question for y'all. When I started working on Color I was told many a time that Color and Interlace does not play well together. Namely, anything in the Geometry room is a no no and also, for any kind or scaling
-
Portal ESS use log / audit / control
Hi all. Is there any way to have a log of all the changes the user does on their own personal data?? A registry for each change of familiar data, bank information... Any change done through the ESS... Do you know anything about that??
-
Using/Setting up a e-mail Account on iPod Touch
I have been able to setup and use my yahoo email on my iPod Touch but I am trying to do the same with my msn/hotmail email. How do I set this up and how can I obtain the the information from Microsoft for this to work? Any help on this matter would b