Error while running test configuration

Hi,
I created a test script using SAPGUI and test configuration.In test configuration,i created 2 variants other than default one.Downloaded the variants and executed it. It was giving error "Error inn ecatt command SAPGUI","Cannot Find Screen Element  in Replay Mode". When i run test script alone,its working fine.
Please tell me how to correct the problem.
Thanks,
Aparna.

Hello Aparna,
As per the error description give by you , it means that when you execute the script recorded the eCATT control is unable to find the screen element in the screen recorded , possible reasons may be that the control may be in some other screen and trying to find the screen element of the other screen in the present screen.
Solution to this may be check the connection id and the session id of the SAPGUI where the script is failing.
Ideally all the connection id and session id of all the SAPGUI's recorded has to be same so that execution takes place in a single session.
Hope it answers your question.
Thanks and Best regards,
Ajay

Similar Messages

  • Error while running OBIA configuration configApps.bat

    I am receiving error while running configapps.bat.
    I have the following wnvironment installed:
    64 Bit windows
    Java 6 (JDK1.6.x)
    Weblogic server 10.3.6 in software only mode
    Ran OBIEE 11.1.1.7.0 RCU utility to create BIPLATFORM and MDS schemas.
    configured OBIEE 11.1.1.7
    Installed ODI 11.1.1.7 with All components and “Skip Repository Configuration”
    Ran OBI Apps RCU to create schemas for:
    ODI Master and Work Repositories (DEV_BIA_ODIREPO)
    Oracle Business Applications Components (DEV_BIACOMP)
    Oracle Business Analytics Datwarehouse (DEV_DW)
    Update to MDS schema.
    Installed BI Apps 11.1.1.7.1
    Applied FMW Platform Patches
    Updated BIACOMP Schema with ATGLite patch scripts
    Everything was up and running until now, when i try to configure OBIA via running configApps.bat, it is getting stuck at ODI configuration.
    Also the server seems to be going to idle/suspended state every now and after 5-6 mins of startup and i see this message repeated again and again in server log :
    <Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
    Has anyone encountered this issue and any idea how to resolve this.
    Appreciate any help in advance ...

    The re-install has been successful. Didnt encounter any issues in any configuration.
    However the waring still appears
    <Warning> <oracle.mds> <BEA-000000> < The MDS session was created by the ADF framework with a transaction key for its "single flush" feature, and the call to flushchanges is restricted to that framework. This call does not use that transaction key and although working now, will fail with an exception in future. To find the originator of the call, set the log level for logger "oracle.mds.transkey" to FINEST. Note that the ADF framework manages the MDS session created for the request so an explicit call to flushchanges should be removed>
    Also in the log i am getting the following errors as well in the Weblogic server log
    BEA -101020  Servelet failed with exception Java.lang.illegalstateexception: Cannot forward a response that is already committed
    Oracle.as.management.mbeans.opmn  OPMN.queryProcessStatus failed with the following exception  oracle.as.management.opmn.optic.OpticBadConnectionException: Failed to create secure socket for OPMN
    All patches were applied successfully, including weblogic one's.
    Has anyone got any idea how to resolve these issues.
    Thanks in advance.

  • CacheException error while running test applications in R12

    Hi
    I try to run Tutorial application for OA Framework R12 and get 500 Internal Server Error:
    oracle.apps.fnd.cache.CacheException
         at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
         at oracle.apps.fnd.profiles.Profiles.getProfileOption(Profiles.java:1485)
         at oracle.apps.fnd.profiles.Profiles.getProfile(Profiles.java:354)
    Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: oracle.apps.fnd.common.PoolException: Exception creating new Poolable object.
         at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:833)
         at oracle.apps.jtf.cache.CacheManager.getInternal(CacheManager.java:4802)
         at oracle.apps.jtf.cache.CacheManager.get(CacheManager.java:4624)
         at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:216)
         ... 50 more
    Caused by: oracle.apps.jtf.base.resources.FrameworkException:
    An exception occurred in the method CacheAccess.get
    null
    The base exception is:
    Exception creating new Poolable object.
         at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
         at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
    OA Framework version is 12.0.6. I have downloaded fresh JDeveloper for this OAF version as described in Note 416708.1 (How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x) and set JDEV_USER_HOME for its home.
    DBC file is freshly generated. I also try to delete slashes in APPS_JDBC_URL in dbc file as advised in [897034 |Cache Exception while running test_fwktutorial.jsp in  R12 thread but still get this error.
    GUEST user password is ORACLE (Select Fnd_Web_Sec.Validate_Login('GUEST', 'ORACLE') From Dual returns 'Y' and system 'Guest User Password' profile value is 'GUEST/ORACLE'). Any idea???

    Hi!,
    I'm also encountering same error while running a page in Jdev with OAF version 10.1.3.3.0. I've recently upgraded my workstation from 3.00 GHz Intel Pentium 4 (Hyper-Threaded) 4 to Dual 2.80 GHz Intel Core2 Duo. I did not encounter this error before in my old workstation.
    Btw, I'm connecting to EBS R12.
    Though I tried running a page in Jdev with OAF version 9.0.3 connecting to EBS 11.5.10 and it was successful.
    Please advise.
    Thanks in advance.
    dolps

  • Memory error while running DI configuration wizard

    Hi
    We have installed NW 7.0 with DI usage. After Installation, we are running DI configuration Wizard. During step (at 48% ) Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers its giving error:
    Exception Class:java.lang.OutOfMemoryError
    Following is the screen shot of error:
    Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
    Description
    No specified detailed description
    State
    START_ACTION
    Support Information
    Type of Action
    InvokeServiceDebug Events
    InvokeService:Assign Role NWDI.XDeveloper to Group NWDI.XDevelopers
    Library: sap.com/tclmconfig~content
    SourcePath ./DIStandaloneProcess/DICommonProcess/DIUserConfigProcess/DIAssignRolesToAddtlGroups/DIInvokeAssignRoleToXDevGroup
    Time 2009/02/03 at 23:38:01
    WSDL /content/common/service/usermanagement/assignRoleToGroup.wsdl
    InvokeService- Result: Failed
    Exception Message:null
    Exception Class:java.lang.OutOfMemoryError
    Stacktrace
    Messages at cancel time
    Messages at exception time
    WebDynpro
    <WebDynpro> <loggedInUser>J2EE_ADMIN</loggedInUser> <initial>true</initial> </WebDynpro> 
    Can anybody help me solving this problem
    Thanks in advance

    Read,
    http://help.sap.com/saphelp_nw70/helpdata/en/43/54cdc48d395f6ce10000000a1553f6/frameset.htm
    That should fix your problem
    regards
    Juan

  • Fatal error while running Test JSP in Jdeveloper

    Hi,
    After performing initial jdeveloper set ups when I run the test JSP i get following error
    It prompts about Port conflict. Upon clicking OK I get following error
    Fatal Error: Unable to write to the transaction log (/E:/p4045639_11i_generic/jdevhome/jdev/system9.0.3.5.1312/oc4j-config/log/transaction.state), possible reasons for this are that Orion lacks permission to write to the file, or that another instance of the server is already running with this configuration (most common): Unable to alter transaction log Process exited with exit code 1.
    Any suggestion how to solve it?
    Thanks,
    Kamath.

    These two simply check you can do in this reference
    1. Check JDEV_USER_HOME set properly.
    2. remove system folder then check again.
    Thanks

  • Error while running test suite

    Hi,
    I have installed TCL-8.5 on unix platform and configured Berkely DB with test suite.
    I then followed steps given in guide to run the test suite. On running the command
    "% source ../test/test.tcl", following error occurs.
    % source ../test/test.tcl
    couldn't load file ".libs/libdb_tcl-4.6.so": .libs/libdb_tcl-4.6.so: ELF file OS ABI invalid
    Could you please help me on this?
    Thanks
    Aman

    I have compiled tcl8.5 and run some simple tests using Berkeley DB, and it appears that Berkeley DB is fine with tcl8.5 (as well as tcl8.4).
    Searching for the error "ELF file OS ABI invalid" it seems to arise when people mix binaries from different platforms, for example attempting to use a Linux binary on a FreeBSD platform. Did you compile Tcl8.5 on the same platform you used for compiling Berkeley DB?
    Regards,
    Carol

  • Error while running test report

    I have just installed oracle application server 10g 10.1.2. on redhat linus AS4 on dell 64 bit machine.
    forms servlet works fine but when i use the following url to access test report
    It gives a very famous error error "REP-51002: Bind to Reports Server *** failed "
    http://zeropoint:7779/reports/rwservlet?report=test.rdf&destype=cache&desformat=pdf
    everything in infrastructure and application server middle tier is working fine.
    the URL
    http://zeropoint:7779/reports/rwservlet
    Works fine
    What might be the problem?
    Regards

    how are you martin
    well i have checked at client side but same problem. the status of report server is
    same as i told you after staring it through URL
    its 1/0
    i have done a freshj installation, but dont know why even after fress installation why isn't it working.
    Let me tell you another thing. My client has not any DNS right now and they are using host file on client side to resolve the server name but they are running successfullly in same netwrok let me tell you another thing that they are using 10.1.2.0.2 on red had advance server 3 on a 32bit machine and the machine on which i am working right now is 64-bit DELL machine with red hat linux advance server 4. I have done same hing in my office on AMD 64-bit machine and there my reports server is running fine.
    So do you think it might be a network problem?

  • XDC error while running test program FP_CHECK_DESTINATION_SERVICE

    Hi, all.
    We are on ECC 6.0 backend single stack and EP6 on NW04 SP17. I have installed the ADS on the java stack on EP6. However, I could not get the XDC working. Note that I am just using http for the ADS, not https.
    When I run the test programs like FP_TEST_00, FP_CHECK_DESTINATION_SERVICE and FP_CHECK_HTTP_DATA_TRANSFER on the ABAP side, it keeps giving me error:
    #1.5#000802104262006000000015000005F0000453556EDC6093#1217526304263#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUser#226#SAP J2EE Engine JTA Transaction : [045ffffffc4ffffffbe0006]###67a637e05f2811dda73c000802104262#SAPEngine_Application_Thread[impl:3]_6##0#0#Error#1#/System/Server#Plain###Processing exception during a "Render" operation.
    Request start time: Thu Jul 31 13:45:03 EDT 2008
    com.adobe.ProcessingError: No <Render><Output><XDC> specified
    However, other checks like http://<server>:<port>/AdobeDocumentServices/Config, FP_PDF_TEST_00 and http://<server>:<port>/sap/bc/fp/form/layout/fp_test_00.xdp, are successful.
    I noticed that the AdobeDocumentServices is missing on the ECC6 since it is single stack. But the folder exists on the EP6 server. From my readings, the XDC is called via RFC against the  FP_ICF_DATA_<SID> destination which I have already setup in EP6.
    So I am really out of idea. Can you please help?
    Thanks,
    Jonathan.

    Well, I am pretty familiar with the ADS config guide now.
    The RFC connection used by Adobe is ADS on sm59. I can run connection test without a problem.
    By the way, the AdobeDocumentServices directory under SYS\global has the following sub-dir:
    DataManagerService
    DestProtoService
    FontManagerService
    lib
    LicenseSupportService
    PDFManipulation
    RenderErrorlog
    ServicesNatives2
    TrustManagerService
    XMLFormService
    I have to create the RenderErrorlog manually. Also, the folders DataManagerService and DestProtoService, RenderErrorlog are empty. Can you check your server and see if you have files underneath these folders?
    I am suspecting something is corrupted on the system because I took over the system from someone.
    Thanks,
    Jonathan.

  • Error while running Test-SpContentDatabase. How to resolve?

    PS C:\> Test-SPContentDatabase -Name WSS_Content_2222 -Webapplication http://10.10.24.241:2222
    Category        : SiteOrphan
    Error           : True
    UpgradeBlocking : False
    Message        : Database [WSS_Content_2222] contains a site (Id = [3eafefc7-e4db-49c1-8ed5-44ab0a9b4596], Url = [/])
                      whose id is already associated with a different database (Id = [4ec4f279-791c-4e04-9f78-a57b2564ed67]
                      , name = [WSS_Content_2222]) in the site map. Consider deleting one of these sites which have conflicting Ids.
    Remedy          : The orphaned sites could cause upgrade failures. Try detach and reattach the database which contains the orphaned sites. Restart upgrade if necessary

    I know this was a while ago - but don't s'pose you recall the fix?
    Ben Weeks
    SharePoint Consultant @ Webtechy Ltd
    T: +441223922070 F: +448701315220
    Web: http://www.webtechy.co.uk Blog:
    http://blog.webtechy.co.uk

  • VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

    Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    Hello All,
    I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues. 
    Any suggestions on the issue i am facing
    error is :
    could not read result repository: unknown transaction id in results:
    or
    could not read result repository: unknown request id in results: 
    Thanks
    Satish

    Hi Kotapati,
    >>Subject: VSTS loadtest error while running Loadtest with Runsettings as  No of test iterations ,  ERROR is :  could not read result repository: unknown transaction
    id in results:
    According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
    If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
    In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
    If possible, I suggest you could share me simple load test for us so that we will further help you.
    You could upload your load test to OneDrive and then copy link here.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm

    Hi All,
    I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
     Failed to create the configuration database.
    An exception of type System.Collections.Generic.KeyNotFoundException was thrown.  Additional exception information: The given key was not present in the dictionary.
    System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
    Any ideas why this is happening?

    Hello together,
    I get the same error mentioned above while running the configuration wizard.
    My Serverenvironment:
    - MS Server 2008 R2 Enterprise
    - Virtual Machine (Host Machine also R2 Enterprise)
    - SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
    - Prerequisites installed without error (and current versions)
    Error information:
    "Failed to create the configuration database"
    "An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
    The given key was not present in the dictionary"
    The logfile has the following entry:
    7/2009 10:52:48  9  ERR                    Task configdb has failed with an unknown exception
    12/07/2009 10:52:48  9  ERR                    Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
       at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
       at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
       at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
       at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
       at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    Any suggestions?
    Thanks
    Christoph

  • Error while running OAF Test Page Http 500 Internal Server Error

    I have installed R12 on my laptop having windows 2003 Server, which running successfully.
    In Same machine i have installed Jdeveloper for OAF customization by following 416708.1.
    While running test OAF page from Jdev, following error accruing. I have Run autoconfig as well.
    There is a problem with the page you are trying to reach and it cannot be displayed.
    Please try the following:
    Open the r12.oracle.com:8988 home page, and then look for links to the information you want.
    Click the Refresh button, or try again later.
    Click Search to look for information on the Internet.
    You can also see a list of related sites.
    HTTP 500 - Internal server error
    Internet Explorer

    HTTP 500 - Internal server error
    Internet ExplorerThis is a generic error, please check Apache log files for details about the error (error_log* and access_log*).
    Thanks,
    Hussein

  • Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

    Hi Techys,
    Kindly help me to resolve the below issue
    "Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
    Many Thanks,
    Madhu

    Hi,
    Follow this link for smooth installation for SP 2010 on Win 7.
    http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
    Murugesa Pandian.,MCTS|App.Development|Configure

  • Error while running a test case in Jcaps 6 JDBC project

    I encountered an error while running the testcase for a JDBC BC project in Jcaps 6.
    BPCOR-6135:A fault was not handled in the process scope; Fault Name is {http://docs.oasis-open.org/wsbpel/2.0/process/executable}selectionFailure; Fault Data is null. Sending errors for the pending requests in the process scope before terminating the process instance
    Caused by: I18N: BPCOR-3023: Selection Failure occurred in BPEL({http://enterprise.netbeans.org/bpel/DBSample/Db}Db
    Kindly suggest a solution

    It seems to be a very common error. Try checking your map assignments when the source (from) is empty (null). These mappings with null values may produce the error you are facing...
    Good luck!

  • Error while running the financial report in the workspace.

    Hi,
    Im getting the below error while running the financial report in the workspace in HTML mode.
    *"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
    And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
    *"You are not authorized to use this functionality. Contact your administrator"*
    Can someone let me know how to resolve this error.

    You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
    1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
    2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
    If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
    3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
    http://workspaceServer:19000/hr/status.jsp
    http://frWebAppServer:8200/hr/status.jsp
    Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
    If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers.

Maybe you are looking for

  • Posting in Local Currency Only

    Scenario: - Foreign Currency Asset acquisitions - Goods Receipt Posted in Period 1 - Exchange Rate fluctuates at month end - Invoice Verification processed in Period 2 - Exchange Variance (USD 5.00) is posted to the Asset A/c. The variance is only in

  • I5 iMac and Windows 7: Headphone jack usage makes 1 core extra crazy

    Hi. I wasn't even sure where to post this, but here goes... I got a new iMac at the Apple Store a few days ago. The same day, I installed Vista Ultimate. Right away, I noticed that the cpu cores (in Task Manager) were in use, one at about 100%. The o

  • How to transfer .swf published to website?

    Hi there, I am a designer with zero code knowledge or experience. I have CS 4 Master Collection right now and am anxiously awaiting the CS 5 to start shipping. However I am evaluating as to whether I should jump ahead and buy flash catalyst now. This

  • Pdf reader plugin for IE8

    Will adobe ever fix the plugin for viewing pdfs in IE8 web browser.  It's been months now since stopped working correctly.  If I click a link to a pdf, I get an empty dialog box with an ok button and IE hangs and has to be re-started. so I always hav

  • StackOverflowError while Persisting

    I am attempting to persist several entities into a SQL Server 2005 database. However when I attempt this, I'm getting a Stackoverflow error. INFO: EJB5018: An exception was thrown during an ejb invocation on [AssetPublisher] Feb 21, 2008 1:58:49 PM c