Error while running the process chain
Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amit
hi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM
Similar Messages
-
RFC ERROR while running BI Process Chain
I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
ThanksThis looks like a BW problem. Do you get the same message when you submit it manually in SAP?
-
Error while designing the Process Chains
Hi All,
I have a issue on Process Chains.
In my Project there are 2 ODS.
ODS 1 : Status Header ODS (ZODS)
ODS 2 : Service Order Header. (0CRM_PROH)
In CRM, if any Service Order is created, it is available in delta Queue(RSA7) immediately.
While loading the data to ODS 2(Service Order),it is checking the data from status ODS 1(Status ODS)
For Example, I am loading the data of service Order 80001 to ODS 2(0CRM_PROH). Before loading to ODS 2, i am checking whether this service Order Number(80001) is available in ODS 1.
If the service Order 80001 is there in ODS 1, it will update the data to ODS 2.
If the service order 80001 is not there in ODS 1, it will not Update the data to ODS 2.
Problem i am facing :
1. First i am loading the data to ODS 1 (Status ODS). Early Morning 2.30AM and it completes the data load at 2.40AM. And document posting is happening on 2.37AM and ODS 1 doesnt pull the data of document posted.
2. Once the ODS 1 is completed, by 2.41AM, the data loading will happen for ODS 2 (Service Order Header).It brings all the data including the document posted on 2.37AM.
3.While loading all the data is available, and while loading to ODS 2, it is checking the status ODS. And it is checking for the document posted on 2.37AM and this document is not there in Status ODS 1 and the data(posted on 2.37AM) will not update in ODS 2.
Because of this, some records are missing in ODS 2. And while loading, we cant stop the document posting also.
How can i achieve this using the process Chain.
Design i have tried in Process Chain :
1. Start Variant.
2. Load Infopackage to PSA only for ODS 2.
3. Load Infopackage to PSA and activate ODS for ODS 1 (Status ODS)
4. Read PSA (of ODS 2) to Load data to ODS 2.
5. Activate the ODS.
I tried, but i got a error message while designing the process Chains.
No type "Activate DataStore Object Data" process can be in front of process "Read PSA and Update Data Target" variable PSA_SERVICE_ORDER in the chain
Pls suggest how to recify this according to my design.
Thanks & Regards,
Ram.Hi,
You can try this..
.......................................... Start ...................................................
Load data to PSA (ODS 2) ..................................... Load data to PSA (ODS 1)
..................................................................................Load data to ODS 1
...................................................................................Activate ODS 1
........................................... AND ..........................................................
........................................ Load data to ODS 2 .............................................
.......................................... Activate ODS 2 ...........................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 3, 2009 4:56 PM -
Error while collecting the process chain in a transport request
Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
PallaviHi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas -
Error while designing the process Chain.
Hi All,
I have created the Process Chain.
1. Start Variant.
2. Load data to PSA for ODS 1.
3. Load data to ODS 2
4. Activate the ODS 2
5. Read PSA and load data target to ODS 1.
6. Activate the ODS 1.
While checking the process Chain, i am getting the error message as
"No Type "Activate Datastore Object data" process can be in front of process "Read PSA and data target" Variable PSA_CONFIRM_ITEM in the chain.
Can u pls help on this issue.
Thanks,
Jelina.Hi,
You can try this..
..................................................... Start ...................................................
Load data to PSA for ODS 1 ..................................Load data to ODS 2
...................................................................................Activate ODS 2
.............................................. AND ..........................................................
........................ Read PSA and load data To ODS 1 .............................................
.......................................... Activate ODS 1 ............................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 4, 2009 10:47 AM -
SET CURRENT DEGREE = 1..error when run the process chain..
Hi Experts,
when i run the process chain , i got the following error..
SET CURRENT DEGREE = 1..
what is this error?
Kindly help ..hi,
As BW reporting queries are often CPU-intensive and geneally executed in parallel.
Parallel processing is activated dynamically in the SAP BW system for every reporting query CURRENT DEGREE = ANY and itsdefault value is 1.
you can limit the maximum number of parallel tasks using ZPARM PARAMDEG(maximum number of parallel tasks ) for the no. of parallel processors for its usuage and this should match no. of processors you can get touch with your basis team
check SAP Note:390016 -DB2/390: BW: Database settings and performance ; in that look at query parallelism it explain about this
hope it helps
regards
laksh -
Error while executing the Process chain
Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit PHi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks -
Error while running FICO process chain
Hi Experts,
While monitoring the FICO related process chain.I got an error due to which the loading of the process chain stoped.
The Error occured at DTP level and the displayed error messages are like this
Aggregation Behaviour of InfoObjects Couldnot be read()
Operation Could not be carried out for
Exception xxxxxxxxxx locked.
Can any one help me out of how to fix this problem
Waiting for reply
Thanks.
Regards,
Mohanhi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM -
Error while running the financial report in the workspace.
Hi,
Im getting the below error while running the financial report in the workspace in HTML mode.
*"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".*
And im not able to login to the Hyperion Financial Reporting as well.. i get the below error
*"You are not authorized to use this functionality. Contact your administrator"*
Can someone let me know how to resolve this error.You don't mention the version, what app server or web server you are using, etc.. That information might be helpful, but in general, you can try the following:
1. Make sure you have gone through the FR Web App deployment steps and verify the settings entered in the Config Tool.
2. For version 11.1.1.x and 9.3.1.x, try opening the report in FR Studio and running it via the FR Studio Print Preview (*bold*not*bold* Web Preview.) If the report runs/processes, then the back-end FR Services are functioning and the issue is confined to the web interface. Verify the FR Web App is up and listening on the designated port (8200, by default), check the FR Web App logs and the App Server (WebLogic, WebSphere, Tomcat, OAS) logs for errors/issues.
If the report fails to process in FR Studio Print Preview, then there is a problem with the FR Reporting Server Service. Check to make sure the service is up/functioning and check the FR Report Server logs for errors.
3. Test access to other FR functionality in workspace (ex: Files->Preferences->Financial Reporting or Explore->Tools->Database Connection Manager?) If these don't work, then try to connect to the following URLs:
http://workspaceServer:19000/hr/status.jsp
http://frWebAppServer:8200/hr/status.jsp
Note: The URLs above assume standard/default ports. You may need to adjust them for your environment.
If the first URL fails, but the second URL works, there is a problem with the HTTP redirect settings on the Web Server (Apache, IIS, etc.) Run through the Workspace deployment and make sure the Web Server Config settings point to the right ports/servers. -
Error while copying a process chain.
Hi All,
I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
Please confirm.
Regards,
Shailja.Hi Shailja,
That means that you can not change that type of object on Quality or Productive server.
Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
Beware that you must change the status not with a double click but with a right click
also refer the following thread you can find your solution
Error message after process chain transport
Hope this helps
Regards
Karthik
<3rd Reminder for points removed>
Message was edited by:
Moderator -
Error while running the program of deferred Tax ( New)Program Name RFUMSV50
Hi
I am getting the error while running the program of deferred Tax ( New)
Following is the detailed error :
Enter rate / INR rate type M for 00.00.0000 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction.
Thanks & Regards,
PMCheck the following notes:-
1) Note 46582 - 2.2->3.0: error SG105 for exchange rate M w. inv.
2) Note 165645 - SG105:Enter rate & / & rate type & for 00.00.0000..
3) Note 483542 - F110: SG105 in maintenance of proposal run with wthhldng tax
4) Note 975657 - SG 105: FI-Enjoy with foreign currency and calculate tax
thanks
G. Lakshmipathi -
Getting an error while running the servlet
getting an error while running the servlet
Sep 3, 2008 2:09:48 AM org.apache.catalina.core.AprLifecycleListener init
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Apache Software Foundation\Tomcat 6.0\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;D:\app\UK-Dasari\product\11.1.0\db_1\bin;D:\oracle\product\10.2.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files\Java\jdk1.6.0_05\bin
Sep 3, 2008 2:09:48 AM org.apache.coyote.http11.Http11Protocol init
SEVERE: Error initializing endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:175)
at org.apache.catalina.connector.Connector.initialize(Connector.java:1059)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 2:09:48 AM org.apache.catalina.startup.Catalina load
SEVERE: Catalina.start
LifecycleException: Protocol handler initialization failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.initialize(Connector.java:1061)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 2:09:48 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 399 ms
Sep 3, 2008 2:09:48 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Sep 3, 2008 2:09:48 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.10
Sep 3, 2008 2:09:49 AM org.apache.coyote.http11.Http11Protocol start
SEVERE: Error starting endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.tomcat.util.net.JIoEndpoint.start(JIoEndpoint.java:513)
at org.apache.coyote.http11.Http11Protocol.start(Http11Protocol.java:202)
at org.apache.catalina.connector.Connector.start(Connector.java:1132)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 2:09:49 AM org.apache.catalina.startup.Catalina start
SEVERE: Catalina.start:
LifecycleException: service.getName(): "Catalina"; Protocol handler start failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.start(Connector.java:1139)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 2:09:49 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 515 ms
Sep 3, 2008 3:06:31 AM org.apache.coyote.http11.Http11Protocol pause
INFO: Pausing Coyote HTTP/1.1 on http-80
Sep 3, 2008 3:06:31 AM org.apache.catalina.connector.Connector pause
SEVERE: Protocol handler pause failed
java.lang.NullPointerException
at org.apache.jk.server.JkMain.pause(JkMain.java:679)
at org.apache.jk.server.JkCoyoteHandler.pause(JkCoyoteHandler.java:153)
at org.apache.catalina.connector.Connector.pause(Connector.java:1074)
at org.apache.catalina.core.StandardService.stop(StandardService.java:489)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:744)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:602)
at org.apache.catalina.startup.Catalina.start(Catalina.java:577)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:06:32 AM org.apache.catalina.core.StandardService stop
INFO: Stopping service Catalina
Sep 3, 2008 3:06:33 AM org.apache.catalina.connector.MapperListener destroy
WARNING: Error unregistering MBeanServerDelegate
java.lang.NullPointerException
at org.apache.catalina.connector.MapperListener.destroy(MapperListener.java:162)
at org.apache.catalina.connector.Connector.stop(Connector.java:1180)
at org.apache.catalina.core.StandardService.stop(StandardService.java:519)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:744)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:602)
at org.apache.catalina.startup.Catalina.start(Catalina.java:577)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:06:33 AM org.apache.coyote.http11.Http11Protocol destroy
INFO: Stopping Coyote HTTP/1.1 on http-80
Sep 3, 2008 3:06:33 AM org.apache.catalina.connector.Connector stop
SEVERE: Coyote connector has not been started
Sep 3, 2008 3:06:54 AM org.apache.catalina.core.AprLifecycleListener init
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Apache Software Foundation\Tomcat 6.0\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;D:\app\UK-Dasari\product\11.1.0\db_1\bin;D:\oracle\product\10.2.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\
Sep 3, 2008 3:06:54 AM org.apache.coyote.http11.Http11Protocol init
SEVERE: Error initializing endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:175)
at org.apache.catalina.connector.Connector.initialize(Connector.java:1059)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 3:06:54 AM org.apache.catalina.startup.Catalina load
SEVERE: Catalina.start
LifecycleException: Protocol handler initialization failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.initialize(Connector.java:1061)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 3:06:54 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 369 ms
Sep 3, 2008 3:06:54 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Sep 3, 2008 3:06:54 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.10
Sep 3, 2008 3:06:54 AM org.apache.coyote.http11.Http11Protocol start
SEVERE: Error starting endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.tomcat.util.net.JIoEndpoint.start(JIoEndpoint.java:513)
at org.apache.coyote.http11.Http11Protocol.start(Http11Protocol.java:202)
at org.apache.catalina.connector.Connector.start(Connector.java:1132)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:06:54 AM org.apache.catalina.startup.Catalina start
SEVERE: Catalina.start:
LifecycleException: service.getName(): "Catalina"; Protocol handler start failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.start(Connector.java:1139)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:06:54 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 526 ms
Sep 3, 2008 3:07:05 AM org.apache.catalina.core.AprLifecycleListener init
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Apache Software Foundation\Tomcat 6.0\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;D:\app\UK-Dasari\product\11.1.0\db_1\bin;D:\oracle\product\10.2.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files\Java\jdk1.6.0_05\bin
Sep 3, 2008 3:07:05 AM org.apache.coyote.http11.Http11Protocol init
SEVERE: Error initializing endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:175)
at org.apache.catalina.connector.Connector.initialize(Connector.java:1059)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 3:07:05 AM org.apache.catalina.startup.Catalina load
SEVERE: Catalina.start
LifecycleException: Protocol handler initialization failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.initialize(Connector.java:1061)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 3:07:05 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 391 ms
Sep 3, 2008 3:07:05 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Sep 3, 2008 3:07:05 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.10
Sep 3, 2008 3:07:05 AM org.apache.coyote.http11.Http11Protocol start
SEVERE: Error starting endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.tomcat.util.net.JIoEndpoint.start(JIoEndpoint.java:513)
at org.apache.coyote.http11.Http11Protocol.start(Http11Protocol.java:202)
at org.apache.catalina.connector.Connector.start(Connector.java:1132)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:07:05 AM org.apache.catalina.startup.Catalina start
SEVERE: Catalina.start:
LifecycleException: service.getName(): "Catalina"; Protocol handler start failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.start(Connector.java:1139)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:07:05 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 462 ms
Sep 3, 2008 3:07:05 AM org.apache.catalina.core.StandardServer await
SEVERE: StandardServer.await: create[8005]:
java.net.BindException: Address already in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.bind(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at org.apache.catalina.core.StandardServer.await(StandardServer.java:373)
at org.apache.catalina.startup.Catalina.await(Catalina.java:616)
at org.apache.catalina.startup.Catalina.start(Catalina.java:576)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:07:05 AM org.apache.coyote.http11.Http11Protocol pause
INFO: Pausing Coyote HTTP/1.1 on http-80
Sep 3, 2008 3:07:05 AM org.apache.catalina.connector.Connector pause
SEVERE: Protocol handler pause failed
java.lang.NullPointerException
at org.apache.jk.server.JkMain.pause(JkMain.java:679)
at org.apache.jk.server.JkCoyoteHandler.pause(JkCoyoteHandler.java:153)
at org.apache.catalina.connector.Connector.pause(Connector.java:1074)
at org.apache.catalina.core.StandardService.stop(StandardService.java:489)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:744)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:602)
at org.apache.catalina.startup.Catalina$CatalinaShutdownHook.run(Catalina.java:645)
Sep 3, 2008 3:07:06 AM org.apache.catalina.core.StandardService stop
INFO: Stopping service Catalina
Sep 3, 2008 3:07:06 AM org.apache.catalina.connector.MapperListener destroy
WARNING: Error unregistering MBeanServerDelegate
java.lang.NullPointerException
at org.apache.catalina.connector.MapperListener.destroy(MapperListener.java:162)
at org.apache.catalina.connector.Connector.stop(Connector.java:1180)
at org.apache.catalina.core.StandardService.stop(StandardService.java:519)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:744)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:602)
at org.apache.catalina.startup.Catalina$CatalinaShutdownHook.run(Catalina.java:645)
Sep 3, 2008 3:07:06 AM org.apache.coyote.http11.Http11Protocol destroy
INFO: Stopping Coyote HTTP/1.1 on http-80
Sep 3, 2008 3:07:06 AM org.apache.catalina.connector.Connector stop
SEVERE: Coyote connector has not been started
Sep 3, 2008 3:07:14 AM org.apache.coyote.http11.Http11Protocol pause
INFO: Pausing Coyote HTTP/1.1 on http-80
Sep 3, 2008 3:07:14 AM org.apache.catalina.connector.Connector pause
SEVERE: Protocol handler pause failed
java.lang.NullPointerException
at org.apache.jk.server.JkMain.pause(JkMain.java:679)
at org.apache.jk.server.JkCoyoteHandler.pause(JkCoyoteHandler.java:153)
at org.apache.catalina.connector.Connector.pause(Connector.java:1074)
at org.apache.catalina.core.StandardService.stop(StandardService.java:489)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:744)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:602)
at org.apache.catalina.startup.Catalina.start(Catalina.java:577)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:07:15 AM org.apache.catalina.core.StandardService stop
INFO: Stopping service Catalina
Sep 3, 2008 3:07:15 AM org.apache.catalina.connector.MapperListener destroy
WARNING: Error unregistering MBeanServerDelegate
java.lang.NullPointerException
at org.apache.catalina.connector.MapperListener.destroy(MapperListener.java:162)
at org.apache.catalina.connector.Connector.stop(Connector.java:1180)
at org.apache.catalina.core.StandardService.stop(StandardService.java:519)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:744)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:602)
at org.apache.catalina.startup.Catalina.start(Catalina.java:577)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:07:15 AM org.apache.coyote.http11.Http11Protocol destroy
INFO: Stopping Coyote HTTP/1.1 on http-80
Sep 3, 2008 3:07:15 AM org.apache.catalina.connector.Connector stop
SEVERE: Coyote connector has not been started
Sep 3, 2008 3:07:20 AM org.apache.catalina.core.AprLifecycleListener init
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Apache Software Foundation\Tomcat 6.0\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;D:\app\UK-Dasari\product\11.1.0\db_1\bin;D:\oracle\product\10.2.0\client_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\QuickTime\QTSystem\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files\Java\jdk1.6.0_05\bin
Sep 3, 2008 3:07:20 AM org.apache.coyote.http11.Http11Protocol init
SEVERE: Error initializing endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:175)
at org.apache.catalina.connector.Connector.initialize(Connector.java:1059)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 3:07:20 AM org.apache.catalina.startup.Catalina load
SEVERE: Catalina.start
LifecycleException: Protocol handler initialization failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.initialize(Connector.java:1061)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:578)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:792)
at org.apache.catalina.startup.Catalina.load(Catalina.java:504)
at org.apache.catalina.startup.Catalina.load(Catalina.java:524)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:260)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:412)
Sep 3, 2008 3:07:20 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 381 ms
Sep 3, 2008 3:07:20 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Sep 3, 2008 3:07:20 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/6.0.10
Sep 3, 2008 3:07:21 AM org.apache.coyote.http11.Http11Protocol start
SEVERE: Error starting endpoint
java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.tomcat.util.net.JIoEndpoint.init(JIoEndpoint.java:499)
at org.apache.tomcat.util.net.JIoEndpoint.start(JIoEndpoint.java:513)
at org.apache.coyote.http11.Http11Protocol.start(Http11Protocol.java:202)
at org.apache.catalina.connector.Connector.start(Connector.java:1132)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:07:21 AM org.apache.catalina.startup.Catalina start
SEVERE: Catalina.start:
LifecycleException: service.getName(): "Catalina"; Protocol handler start failed: java.net.BindException: Address already in use: JVM_Bind:80
at org.apache.catalina.connector.Connector.start(Connector.java:1139)
at org.apache.catalina.core.StandardService.start(StandardService.java:457)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:07:21 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 485 ms
Sep 3, 2008 3:34:44 AM org.apache.coyote.http11.Http11Protocol pause
INFO: Pausing Coyote HTTP/1.1 on http-80
Sep 3, 2008 3:34:44 AM org.apache.catalina.connector.Connector pause
SEVERE: Protocol handler pause failed
java.lang.NullPointerException
at org.apache.jk.server.JkMain.pause(JkMain.java:679)
at org.apache.jk.server.JkCoyoteHandler.pause(JkCoyoteHandler.java:153)
at org.apache.catalina.connector.Connector.pause(Connector.java:1074)
at org.apache.catalina.core.StandardService.stop(StandardService.java:489)
at org.apache.catalina.core.StandardServer.stop(StandardServer.java:744)
at org.apache.catalina.startup.Catalina.stop(Catalina.java:602)
at org.apache.catalina.startup.Catalina.start(Catalina.java:577)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:413)
Sep 3, 2008 3:34:45 AM org.apache.catalina.core.StandardService stop
INFO: Stopping service Catalina
Sep 3, 2008 3:34:45 AM org.apache.catalina.connector.MapperListener destroy
WARNING: Error unregistering MBeanServerDelegate
java.lang.NullPointerEuk-dasari wrote:
java.net.BindException: Address already in use: JVM_Bind:80You've another service (a HTTP server?) running on port 80.
Either shut it down or assign the current server another port. -
Authorizations setting for running the process chain
Hai
Iam planning to run the process chain for loading the data into ODS. But i dont have authorization for it.
so what are the authorizations i need to run the process chain in my system. And how can i set all those authorizations to my user-id. I have all authorization rights .
Pls let me knw
kumarHi,
Authorizations for Process Chains
Use
You use authorization checks in process chain maintenance to lock the process chain, and the processes of the chain, against actions by unauthorized users.
· You control whether a user is allowed to perform specific activities.
· You control whether a user is allowed to schedule the processes in a chain.
The authorization check for the processes in a chain runs when the system performs the check. This takes place upon scheduling or during synchronous execution. The check is performed in display mode. The check is performed for each user that schedules the chain; it is not performed for the user who executes the chain. The user who executes the chain is usually the BI background user. The BI background user automatically has the required authorizations for executing all BI process types. In attribute maintenance for the process chain, you can determine the user who is to execute the process chain.
See also: Display/Maintenance of Process Chain Attributes ® Execution User.
Features
For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
To work with process chains, you require authorization for authorization object S_RS_PC. You use this authorization object to determine whether process chains can be displayed, changed or executed, and whether logs can be deleted. You can use the name of the process chain as the basis for the restriction, or restrict authorizations to chains using the application components to which they are assigned.
Display/Maintain Process Chain Attributes
Use
You can display technical attributes, display or create documentation for a process chain, and determine the response of process chains during execution.
Features
You can display or maintain the following attributes for a process chain:
Process Chain ® Attribute ® ...
Information
Description
( Rename)
You can change the name of the process chain.
Display Components
Display components are the evaluation criterion in the process chain maintenance. Assigning the process chains to display components makes it easier to access the chain you want.
To create a new display component, choose Assign Display Components in the input help window and assign a technical name and description for the display component in the Display Grouping dialog box that appears.
Documents
You can create and display documents for a process chain.
For more information, see Documents.
Last Changed By
Displays the technical attributes of the process chain:
· When it was last changed and who by
· When it was last activated and who by
· Object directory entry
Evaluation of Process Status
If you set this indicator, all the incorrect processes in this chain and in the overall status of the run are evaluated as successful; if you have scheduled a successor process upon error or always.
The indicator is relevant when using metachains: Errors in the processes of the subchains can be evaluated as unimportant for the metachain run. The subchain is evaluated as successful, despite errors in such processes of the subchain. If, in the metachain, the successor of the subchain is scheduled upon success, the metachain run continues despite errors in unimportant processes of the subchain.
Mailing and alerting are not affected by this indicator and are still triggered for incorrect processes if they have an upon error successor.
Polling Indicator
With this indicator you can control the response of the main process for distributed processes. Distributed processes, such as the load process, are characterized as having different work processes involved in specific tasks.
With the polling indicator you determine whether the main process needs to be kept until the actual process has ended.
By selecting the indicator:
- A high level of process security is guaranteed, and
- External scheduling tools can be provided with the status of the distributed processes.
However, the system uses more resources; and a background process is required.
Monitoring
With the indicator in the dialog box Remove Chain from Automatic Monitoring?, you can specify that a process chain be removed from the automatic monitoring using CCMS.
By default CCMS switches on the automatic process chain monitoring.
For more information about the CCMS context Process Chains, see the section BW Monitor in CCMS.
Alerting
You can send alerts using alert management when errors occur in a process chain.
For more information, see Send Alerts for Process Chains.
Background Server
You can specify here on which server or server group all of the jobs of a chain are scheduled. If you do not make an entry, the background management distributes the jobs between the available servers.
Processing Client
If you use process chains in a client-dependent application, you can determine here in which client the chain is to be used. You can only display, edit, schedule or execute the chain in this client.
If you do not maintain this attribute, you can display, edit, schedule or execute the process chain in all clients.
Process variants of type General Services that are contained in a process chain with this attribute set will only be displayed in the specified client.
This attribute is transported. You can change it by specifying an import client during import. You must create a destination to the client set here in the target system for the import post processing (transaction RSTPRFC) The chain is activated after import and scheduled, if necessary, in this client.
Execution User
In the standard setting a BI background user executes the process chain (BWREMOTE).
You can change the default setting so that you can see the user that executes the process chain and therefore the processes, in the Job Overview. You can select the current dialog user who schedules the process chain job, or specify a different user.
The setting is transported.
The BI background user has all the necessary authorizations to execute all BI process types. Other users must assign themselves these authorizations so that authorization errors do not occur during processing.
Job Priority
You use this attribute to set the job priority for all of the jobs in a process chain.
Hareesh -
Error while running the Report
Hi ,
I am trying to run the Report in Bex Analyzer. and once I enter the value for the variable, it gives me message that "Element is not correctly define (please check query)" and when i click on the error it gives me detail message as below :
<b><b>Diagnosis
Additional elements that do not have the same dimension, such as quantities and amounts or amounts and ratios, are added to element Sales Qty Gallons .
Procedure
Check your definition.
If you still want to use this addition, you can suppress the dimensionality of one or both subexpressions by using the 'NODIM' operator. The system then interprets this or these subexpressions as nondimensional numbers.
In the executed query, you can use the Key Figure Definition function to analyze element Sales Qty Gallons .</b></b>
Now the thing is I am already using "NODIM" operator to add those elements. and I m not sure why this error is coming up now because I have created this query a while ago and it wasnt giving me any error at that time but now I have make some changes into it and it;s giving me this error while running the Report. But the thing is I didnt change anything in the element for which it;s showing me error.
Thanks,
NaitikNaitik,
There are two or more key figures in your report. They are defined by different dimensions and somewhere you have a formula with both these key figure.
Edit your query and select the Check Query icon. It will tell you which calculation you have the problem with. Edit this calculation to see which key figures are present.
If the formula is logically correct, best thing to do is to put a NODIM( ) on your key figures that make up the formula, and then change you formula to look at the NODIM( ) version.
That will fix things for you,
Regards
Gill -
Error while running the tutorial posted by Steve Muench
Hi Guys,
I have been trying to run the tutorial published by Steve Muench on October 9 2006. I've followed all the steps as specified in the tutorial.
Chapter 3.4:Run the Application, should supposed to compile and run my application using stand-alone embedded OC4J. It was compiled witout any error. But gave me the following error while running the application.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\oracledevday\jdeveloper\jdev\system\oracle.j2ee.10.1.3.39.14\embedded-oc4j\config>
C:\oracledevday\jdeveloper\jdk\bin\javaw.exe -client -classpath C:\oracledevday\jdeveloper\j2ee\home\oc4j.jar;C:\oracledevday\jdeveloper\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\oracledevday\jdeveloper\jdev\system\oracle.j2ee.10.1.3.39.14\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
2006-10-12 22:47:17.250 NOTIFICATION JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
2006-10-12 22:47:17.265 NOTIFICATION JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
2006-10-12 22:47:22.609 ERROR J2EE HTTP-00004 Internal error raised tyring to instantiate web-application: webapp defined in web site OC4J 10g (10.1.3) Default Web Site. Application: datatags does not exist. Error creating Web application: webapp
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 14015 ms.
Target URL -- http://10.10.10.10:8988/MyDemo/faces/pages/EmployeesTable.jspx
06/10/12 22:47:22 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
22:47:26 WARN (Digester) -[ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null)
22:47:26 WARN (Digester) -[ConverterRule]{faces-config/converter} Merge(javax.faces.Number,null)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(*)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(*)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/EmployeesTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/DepartmentsTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/LocationsTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/CountriesTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/RegionsTable.jspx)
22:47:27 WARN (Digester) -[NavigationRuleRule]{faces-config/navigation-rule} Merge(/pages/JobsTable.jspx)
2006-10-12 22:47:29.546 TRACE Setting JAZN Config property ...
2006-10-12 22:47:29.625 NOTIFICATION ---- JAZNSecurityContext.getUserPrincipal(): NULL
2006-10-12 22:47:32.015 NOTIFICATION ADF Faces is running with time-stamp checking enabled. This should not be used in a production environment. See the oracle.adf.view.faces.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
22:47:32 DEBUG (JhsPageLifecycle) -Executing prepareModel, page=/pages/EmployeesTable.jspx, pagedef=EmployeesPageDef
22:47:32 DEBUG (JhsNavigationHandlerImpl) -Executing checkRoles
22:47:32 DEBUG (BreadcrumbStack) -Adding breadcrumb to stack: "Employees" (/pages/EmployeesTable.jspx)
22:47:32 DEBUG (JhsPageLifecycle) -Executing prepareRender, page=/pages/EmployeesTable.jspx, pagedef=EmployeesPageDef
22:47:32 DEBUG (BreadcrumbStack) -Breadcrumb already on stack; rolling back the stack
22:47:32 DEBUG (BreadcrumbStack) -Adding breadcrumb to stack: "Employees" (/pages/EmployeesTable.jspx)
2006-10-12 22:47:34.468 ERROR
Please advise and let me know if you need any other information from me.
Thanks,
Magesh.Thanks Steven.
That makes sense. Is there anything I can do to make this demo work without de-installing 10.1.3.1 Preview? Or If I also install 10.1.3.0.4 with SU5 on another folder, does that affect my 10.1.3.1 Preview version?
I'm using 10.1.3.1 Preview version to learn Oracle's SOA suite.
Thanks again,
Magesh.
Maybe you are looking for
-
IPad 3rd gen no longer charges unless shut off and not recognized by iTunes
iPad 3rd gen no longer charges unless shut off and not recognized by iTunes. Done 2 resets, used original charger and cable and bought brand new charger and cable from Apple store. Nothing works. This started yapping after the iOS 7.1.1 update.
-
How to unblock the ipod touch?
hi there, my ipod touch is locked due to the incorrect passcode please help!!
-
Hello! I just got the Late 2012 iMac 27 inch. And I noticed a black dot in the middle of the screen. At first I thought it was a dead pixel... until I took a photo of it and zoomed in. It looks like some sort of dirt stuck in between pixels behind th
-
Bluetooth keyboard stops working when i plug in my iphone 5
Hi All... Heres a question from the twilight zone where strange things happen. My Hardware/Software used: - iMac OSX 10.9.2 - Mac wireless Keyboard - Logitech mouse performance MX - iTunes 11.1.5 (5) - iPhone 5 v7.1 (11D167) I plug in my iPhone via U
-
Mods email address changed?
Hi I have just sent an email to [email protected] and it has come back saying delivery failed. Have they now got a new email address? Please can you let me know Thanks