Error while saving a workflow via sharepoint designer Office 365: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities

Hi,
I get the above error whenever I try to save a new WorkFlow. I have cleared the caches
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>, and
I still get the same issue.
We are using SharePoint Designer 2013 (15.0.4569.1503) and connecting to SharePoint 2013 on Office 365.
Can you please provide more insight?
Thanks.

Hi Rake,
You can compare your PC and another machine which is working, see if it is related to IE settings(e.g. SharePoint urls in trusted sites zone).
And you can try re-install the SharePoint Designer 2013 with same version and bit-version(32/64) on your PC like another machine, then check again.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Similar Messages

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while saving list workflow in sharepoint designer 2013

Hi,
I am trying to create custom workflow using sharepoint workflow 2013 at client side.While i am saving this,it thowas error-"Server side activities have been updated.you need to restart sharepoint designer to use the updated version
of activites"
I have installed 32-bit sharepoint designer 2013 in my system and i have no access to server.
I have also followed the solution and deleted the contents in the below location.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
Please help to solve the error.
Thank you

You need to install updated version of SharePoint designer.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Try below:
http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha

Error while saving any workflow in database

hi
i had created a simple workflow and i was trying to save in database, but i faced following problem while saving...
plz help for this
1700: Could not connect with username/password 'system/myadmin@orcl' ('ORA-12154: TNS:could not resolve the connect identifier specified
-----------------------------------------------------------------------------------------------------------------------

You need to install updated version of SharePoint designer.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f255f4b4-1828-4ccb-983a-5efbf0e020ae/sharepoint-designer-2013-server-side-activties-have-been-updated-prompt?forum=sharepointcustomization
Try below:
http://stackoverflow.com/questions/19652391/error-while-saving-a-workflow-via-sharepoint-designer-server-side-activities-ha

Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alert

How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

I am getting error while saving new WORKFLOW

Dear All,
Please help me for the following issue.
I am trying to make new WORKFLOW but system gives a ERROR while saving from SWDD tcode.
error is:
System error: Function cancelled
Message no. WD255
Regards,
Mukesh

Hi Mukesh,
You have to maintain the Prefix numbers in the system, in tcode SWU3 --> maintain definition environment --> Maintain prefix number --- > click on execute button.
There, create a new value for your client(XXX) system to generate the workflow definition / task definition.
Regards,
Murali Krishna.

Since uploading Firefox 4 I get error messages saying it can't update and I should be sure I am using the latest version. I am, so why will updates not load?

The question is in the title. I have had no updates to Firefox 4, just error messages saying they can't be loaded and I should check that I am using the latest version. I have downloaded Firefox 4 again to be sure my copy is up to date but it makes no difference. I still get the error message.

Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)

Error while saving contents from share location in office 2013

Hi
We have an issues like when we open a file and save from network location in exel 2013 it is show the below error.We have bypassed the Antivirus also still we are coming across the same error.
We are using ms office 2013 std.
network location is in a netapp storage. aso the user is having modify rights in the folder.
pls let me know any fix..

Hi,
Please first make sure your Excel and antivirus is fully patched.
How did you bypass the antivirus? Does this issue happen even the antivirus is turned off? Please contact the antivirus provider to make sure if there is any update released for this issue.
In addition, some people worked around this issue by turning off Windows Search indexing, you may have a try.
Regards,
Steve Fan
TechNet Community Support

SharePoint Designer 2013: Server-side activities have been updated

When developing custom activities for SharePoint 2013 Workflows, I ran into the problem that SharePoint Designer prompts “Server-side activities have been updated. Please restart SharePoint designer” every time when you try to create a new workflow.

Hi,
I recommend to clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
< user profile>\appdata\local\microsoft\websitecache\<sitename>
http://social.technet.microsoft.com/Forums/en-US/5796972e-3a92-4306-8cf1-e1e7b9ab9635/error-while-saving-a-workflow-via-sharepoint-designer-serverside-activities-have-been-updated-you?forum=sharepointcustomization
If the issue still occurs, please re-install SharePoint Designer.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error in sharepoint 2010 designer while saving:"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see the results of the save? "

Hi,
I am doing development in sharepoint 2010 and facing this very weird problem.
If I create a site page with the sharepoint look and feel for that site and try to save the site page,i am getting this error:**"Content in the embedded form may be changed by the the server to remove unsafe content.Do you want to reload your page to see
the results of the save? "** and when i say reload,the server removes some parts of my page, e.g onclick event of html,asp buttons.
This error just comes for any sharepoint site page,e.g i took a copy of 'How To Read Library' page just edited the text part of taht page,and when i try to save this error again comes up.
However,if i create a simple aspx page with only htmltags like head body,then thr is no problem ,everything works great. But sharepoint look and feel pages are giving troubles while saving.
has anybody seen this earlier,what could be the reason for this?
Thanks

I think the excerpt and link below is the why, but the page talks about server code and not javascript. I guessing that this is why blank pages work, but not wiki pages. Can anyone verify this?
The following are general rules for using server-side code on a site page.
If the page is uncustomized, server-side code is supported on the page.
If the page is customized, server-side code does not run, and the page does not render. This includes the code-behind for the page itself.
http://msdn.microsoft.com/en-us/library/office/aa979592(v=office.14).aspx

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while saving project in cProjects

Hello,
I am getting following error while saving a project in cProjects-
Access via 'NULL' object reference not possible.
Details of the error are given below-
Can somebody please help me resolve this error?
Thanks and regards,
Milind Dumbre
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
      caught in    procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "LR_CALC").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.

Hi Milind,
You may check the settings by navigating to the following path
IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
--> Define Object Links for Accounting Integration.
Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
Let me know if this helps.
Regards,
Vivek Pandey

Error while executing BEX query via FM

Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikesh

the key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date

Error while connecting to workflow builder after installation...first time!

Hi,
I have installed Oracle Workflow Builder 2.6.3 recently on my system and after installation, when I am trying to connect the workflow builder (using database username/password of that particular instance), it is throwing me the following error:
220: Unable to set NLS_LANGUAGE.
210: Oracle Error: ORA-01403: no data found
. SQL text: SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
In the previous threads when I searched for the same issue, I found that if
select value from v$nls_parameters
where parameter='NLS_CHARACTERSET';
returns the value other then WE8ISO8859P1 then that is what I should change my NLS_LANG entry for the builder - i.e. AMERICAN_AMERICA.<character set>.
But I am not getting where should I change NLS_LANG, it is located where...some file? I am new to Workflow.
Please help me. I tried a lot. Any type of help will be highly appreciated.
Thanks,
Sumir

This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
HTH
Srini

Error while saving record "User:johndoe": Error -14071

I have added my augmented users from the AD server. When I select user and to apply a setting under Preferences I get this on attempting an "Apply", Error while saving record "User:johndoe":Error -14071. I'm authenticating to my LDAP not AD/All Domains.
I have the server bound correctly to the AD server. Bound to AD, then promoted to OD master.
Tried WGM from another Mac, same error.
I recall my AD admin extending the ad schema last year for OS X 10.4.
Thoughts? Thanks.

Thanks David and Mabel, and all for the suggestions. I did go through "Leveraging Active..." prior to posting. I did try your method of canceling the authorization to WGM and viewing Directories. I would select a user from this method and try to apply something from MCX, but still got the -14070 error. Yes, I do have my client bound 1st OD, 2nd AD, with OD first on the search policy for the client.
I though I had solved my issue by authenticating to WGM and LDAP. Then selecting Groups and the Members tab, I define an OD group and select that group. I can then click the "+" towards the right of the window. Then select my AD there which populates. I can add my AD groups or single users to my OD group. Then I'm able to apply MCX settings. But, no "blue" circle next to the group's silhouette. How is my method possibly incorrect?
Also, at some point I unbound my client from AD and it seems the client is ok with getting AD info off my OD server. Example, my AD sharepoint mounts for PHD.
But, I do have a pause of 20 secs. are more when logging into the client as well as accessing applications. Side effect of my method?

Error while saving a workflow via sharepoint designer Office 365: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities

Similar Messages

Maybe you are looking for