Error while saving activity - it was not possible to save all objects

Hi
We are on ECC6 EHP4 and having just started to config EIC ERP, we have done some configuration and have referred to various SAP notes, the main note being 1052082 to set up case management.  We have managed to create an activity but on saving we get the following messages:
Error whilce saving activity (message class HREIC_APPL - message number 246)
Activity was saved
It was not possible to save all objects successfully (message class CRM_BOL - message number 010)
We are not sure how to correct this, we have searched and cannot find anything relating to these messages, I hope someone can be of assistance.
many thanks
Julie

Hi Julie
There are list of items that dont transport or need to be updated via manual configuration such as number ranges, surveys, email addresses and several others.
Glad you figured out this one.
Jarret

Similar Messages

  • Error : Transaction not possible to save all objects successfully

    Hi All,
    We are facing the below error after our CRM 7.0 upgrade when we save Service ticket and IR in IC web.
    The flow is unknown, some times when we create a new ticket it comes some times when we edit existing ticket comes.
    Strange thing is we are unable to reproduce the same in our pre prod and also prod environment
    Only our agents are able to reproduce.
    Service Ticket : Error
    ! Transaction not possible to save all objects successfully.
    u221A It was not possible to save all objects successfully
    u221A The predecessor does not exist on the database.
    u221A The predecessor does not exist on the database.
    IR: Error
    Status object not available on Unkonwn object
    [The status dropdown is empty]
    Please help us with any pointers on the same.As we are not able to get to the root cause.
    Thanks
    AMol

    Hello Amol,
    You say that you upgrade your system to CRM7 that means your BADI_SAVE (or ACTIONS etc') are written with Function modules and maybe you add some new coding with BOL/GENIL.
    We had some similar problem  so we rewrite all BADIs ACTIONS PARTNER DETERMINATIONS etc' to work only with BOL/GENIL technology and it solve our problem.
    Hope it helped or at least gave you some direction.
    Good Luck
    Eli

  • Error while saving Adobrforms: There was a error reading the document(26)

    Hello,
    Am not able to save the pdf form.
    Error : "The document could not be saved.There was a error reading the document(26)."
    Can anyone please tell me why i am getting this error.
    Thanks,
    satheesh

    Hi Satheesh,
    Can you give more details about your scenario..
    Regards,
    Ravi

  • Error while releasing :-Content item  was not successfully checked

    Hi
    I have create a ucm user "john" which has auth type "Local" and roles of
              Admin
              contributor
              Sysmanager
    "admin" role:- has Groups/rights such as
              Rights.Apss.RepMan
              Rights.Apss.Workflow
              Rights.Apss.ConfigMan
              Rights.Apps.Archiver
              newgroup(RWDA)
              release (RWDA)
              secure (RWDA)
    "contributor" role :- has Groups/rights such as
              newgroup(RWDA)
              public(RW)
              release(RWDA)
              secure()
    "sysmanager" role has groups/rights
              newgroup(RWDA)
              public(R)
              release(RWDA)
              secure(R)
    When I am trying to release the documents I get error such as
    Event generated by user 'john' at host '192.168.21.215'. Content item <undefined> was not successfully checked in. Security group is not defined. Unable to validate user security. [ Details ]
    An error has occurred. The stack trace below shows more information.
    !csUserEventMessage,john,192.168.21.215!$!csUnableToCheckIn,!csSecurityGroupNotDefined
    intradoc.common.ServiceException: !csUnableToCheckIn,!csSecurityGroupNotDefined
         at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1739)
         at intradoc.server.Service.buildServiceException(Service.java:1999)
         at intradoc.server.Service.createServiceExceptionEx(Service.java:1993)
         at intradoc.server.Service.createServiceException(Service.java:1988)
         at intradoc.server.ServiceSecurityImplementor.determinePrivilege(ServiceSecurityImplementor.java:795)
         at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:110)
         at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:67)
         at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:320)
         at intradoc.server.Service.checkSecurity(Service.java:2546)
         at intradoc.server.Service.checkSecurity(Service.java:2524)
    As per the document I have given the user required group and role permission . What more should I do to release it ?
    Guidance requested
    Thanks
    Joseph John

    By release you mean you are unable to checkin a document?
    How are you trying to checkin the document? DIS, SOAP, standard checkin form page??
    It looks as if you haven`t supplied a security group or content id on the document meta data when you have checked in the document..
    You can automatically assign content ids by going to admin server and enabling auto assign id check box.
    John should only need the admin role, that will give the user full access.

  • Error while Saving the report

    Hi,
    i have created some reports which are working fine,
    but now i am facing some errors while saving the files.
    Also the reports does show only one record while there are many records in the database.
    The error messages are as follows:
    REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
    REP-1070: Error while opening or saving a document.
    Please help me to find out the exact problem.
    Also tell me how can i show all the pages of Database records in a report( while one record on each page)

    As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
    Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
    Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
    As you'll discover, Reports is not the most robust application ever written.

  • Trying to archive but keeps saying "alert-there was an error while saving"

    I have been trying to archive a dvd project in idvd6 but I get an error every time that says "Alert-there was an error while saving" The project never saves. I am trying to save this to an external hard drive. I have checked permissions and all say read and write. Help!!

    If it's like mine, there are two ports. Have you switched and tried?
    Wait a second... Did you ever format that drive as Mac OS Extended? It was probably formatted for FAT32, or whatever The Dark Side uses these days.
    I about to apply the 10.4.7 Combo updater. If I'm not back soon, it didn't go so well...

  • UI error "The requested lookup key was not found in any active" workaround

    Hi All.
    Some of you might have this problem when making a UI-Connection "The requested lookup key was not found in any active activation context"
    Talking to SAP Support and Gianluigi Bagnoli about the problem here is a sum of the problem and the workaround to prevent it (at least untill SAP development fix the problem)
    Some facts:
    - The error is present in SBO2005A SP01 and SBO2005B SP00, SBO2007A should not be affected
    - The error occur because the SAP client fail to provide the correct/entire connection-string
    - The problem is actually an underlying problem from Microsoft (try searching google with the error message)
    - Normally after the error occur, you can go to Administration > Add-ons and start the add-on manually without problems
    Some additional observations
    - The error mostly happen just after startup of a windows machine
    - We have had a couple of customers that have had the problem, then upgraded the SAP client to a new patchlevel and got rid of the problem (but we have also had customers where this did not help)
    - Seem to be happening more often of slower machines
    Workaround
    Knowing that this problem is tied to and incorrect connection string is also the "workaround"... What you could do is to create exception handling around the UI connection, and if it fails connection using the development connection string (like you do during development) The connection string is: 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004
    Using this method, you will be able to establish a connection even if the client is unable to provide you a correct connectionstring, but the draw-back of this workaround is that the add-on will be indicated as failed in the Add-on Manager and the user is not able to stop the add-on in any way other than disconnection from the company.

    Hi,
    I am looking for a solution to the error "The requested lookup key was not found in any active activation context" too.
    In our add-on we do two SboGuiApi.Connect(sConnectionString), one from MyAddon.exe and the other one from MyAddon.dll. The .exe catches messages and .dll interacts with UI to paint forms etc. It is since the .exe and .dll are not in the same thread. The first connection works fine in the .exe, then that connection string is passed to the dll and the error is raised. The rare thing is why it works fine from the development enviroment, but doesn't work when SAP is starting the Addon?
    Is it possible connect twice?
    Can we connect in the .exe using the connection string received from SAP and in the .dll using the development connection string?
    It is over
    Windows XP 2002 SP2
    SBO2007A patchlevel 15
    VS 2005 C#
    SQL Server 2005
    Thank you

  • I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

  • HT201210 i tried to jailbreak my ipod 4g 6.0.1(523) but was not possible. now i cant restore it becouse say i cant restore my ipod error 3194. i try to edit hosts on win32 but was unsuccesfully. anybody help me please :(((((

    i tried to jailbreak my ipod 4g 6.0.1(523) but was not possible. now i cant restore it becouse say i cant restore my ipod error 3194. i try to edit hosts on win32 but was unsuccesfully. anybody help me please :(((((

    Jailbreak discussion is not allowed in forum.
    And you have learned the risk of jailbreak.

  • IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

    IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately.  IMEI 013311005943507. Help please! the official service Moscow  representation FDA ipad offer to send in the U.S. for $ 500!

    Hello this is happening to us also (minus the Bluetooth speaker).  We can't figure out what is causing the data usage.  I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started.  Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours.  My husband called Verizon  and got the usual doubting Thomas response.  I understand that they don't know my device settings.  So over the phone we check all the settings and turned  off every possible culprit eating up the data and end the call.  By now I have purchased another gig for the month!  Assured we are NOT using mobile data, we continue on the IE path to bliss.  HA!  A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data.  After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card.  This has stopped the data usage, but it defeats the purpose of having the data plan.  I could have just stuck with my Surface.  Verizon sent us a new sim card.  Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot.   I am surprised at the number of complaints about this device.  When we called the Verizon support acted as though this was the first time they had heard about this.   Loved your post, you should write for a living.

  • Oops... a server error occurred and your email was not saved.

    after completion of mail content when try to send the message error shows as
    "Oops... a server error occurred and your email was not saved."
    This problems are being experienced very often since installation of Firefox version 5.0

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • Error while saving project in cProjects

    Hello,
    I am getting following error while saving a project in cProjects-
    Access via 'NULL' object reference not possible.
    Details of the error are given below-
    Can somebody please help me resolve this error?
    Thanks and regards,
    Milind Dumbre
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
          caught in    procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: "LR_CALC").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.

    Hi Milind,
    You may check the settings by navigating to the following path
    IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
    -->  Define Object Links for Accounting Integration.
    Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
    Let me know if  this helps.
    Regards,
    Vivek Pandey

  • Error while saving record "User:johndoe":     Error -14071

    I have added my augmented users from the AD server. When I select user and to apply a setting under Preferences I get this on attempting an "Apply", Error while saving record "User:johndoe":Error -14071. I'm authenticating to my LDAP not AD/All Domains.
    I have the server bound correctly to the AD server. Bound to AD, then promoted to OD master.
    Tried WGM from another Mac, same error.
    I recall my AD admin extending the ad schema last year for OS X 10.4.
    Thoughts? Thanks.

    Thanks David and Mabel, and all for the suggestions. I did go through "Leveraging Active..." prior to posting. I did try your method of canceling the authorization to WGM and viewing Directories. I would select a user from this method and try to apply something from MCX, but still got the -14070 error. Yes, I do have my client bound 1st OD, 2nd AD, with OD first on the search policy for the client.
    I though I had solved my issue by authenticating to WGM and LDAP. Then selecting Groups and the Members tab, I define an OD group and select that group. I can then click the "+" towards the right of the window. Then select my AD there which populates. I can add my AD groups or single users to my OD group. Then I'm able to apply MCX settings. But, no "blue" circle next to the group's silhouette. How is my method possibly incorrect?
    Also, at some point I unbound my client from AD and it seems the client is ok with getting AD info off my OD server. Example, my AD sharepoint mounts for PHD.
    But, I do have a pause of 20 secs. are more when logging into the client as well as accessing applications. Side effect of my method?

  • WCM Error while saving Project

    Hi,
    I am getting following error while saving new created project in cProject.
    Saving is not possible because the WFM Core data could not be adjusted
    Message no. PRP086
    Diagnosis
    When checking the project role or project role staffing, differences to the related WFM Core data were found. The project cannot be saved because the data cannot be adjusted. Possible causes for this include:
    The WFM Core is not installed locally. When working with the application, the WFM Core service is suddenly no longer available.
    The WFM Core configuration has been changed in Customizing.
    The WFM Core is only activated after projects have been created. During the automatic adjustment of data, it is determined that resources unknown in the WFM Core are assigned to existing project role staffing.
    When working with the application, an existing resource already assigned in the WFM Core is deleted.
    System Response
    The project cannot be saved.
    Procedure
    Contact the system administrator if the required resource is not known in the WFM Core. The project can be saved as soon as the resource is created.
    Let me know how to resolve this issue??
    Thanks in advance,
    Atul.

    hi Atul,
    Are you using WFD server for your resource planning in cProjects???
    If yes, you have to do settings in customizing for the same in Workforce deployment server under Resource Management in cProjects.
    If not, then do following settings to remove the error you are getting:
    1) SPRO -> Collaboration Projects -> Resource management-> Business Partner-> Set Up Integration of HR,
    Maintain following setting:
    Group     Sem. abbr     Value abbr     Description
    HRALX     HRAC     X     Activate HR Integration
    2) SPRO -> Collaboration Projects ->  Resource management Qualification Management->  Activate Qualification Search and Matchup Using WFM Core
    In this, deactivate the use of WFD Core for the qualification match up and the search by deleting the X under Value abbr. in the activity Activate Qualification Match up and Search Using WFM Core.
    Hope this will be helpful to you.
    Regards,
    Niraj Sikligar

  • CAD Integration - Error While Saving file

    Hi,
    Im having One  Document type "DRW" which was working fine with all the functionalities.
    After that i created another document type "PDW". Now all the functionalities are working fine for this Document type and not for "DRW".
    Im getting an error while saving the drawing file in AutoCAD.
    For DRW Type, I can able to create a DIR. After creating DIR if i click save button im getting this error.
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: BAPI_DOCUMENT_CHANGE2
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Reading titleblock data for 0000000000000010000000458/DRW/000/00...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: CAD_GET_TITLE_BLOCK_DATA
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Updating document info record 0000000000000010000000458/DRW/000/00 ...
    RFC_SYS_EXCEPTION
    SAP RFC error
    Operation: BAPI_DOCUMENT_CHANGE2
    Group    : 104
    Key      : RFC_ERROR_SYSTEM_FAILURE
    Message  : Wrong status
    Command:
    Command: Conversion to JPG done.
    Checkin file into the existing storage category ZMRK ...
    E26 253 Error while checking in and storing:
    C:\SapWorkDir\AcadM\ConvertTempPath\10000000458_DR
    But there is no error in "PDW" document type.
    Anybody have any idea on this?
    Regards,
    MRK.

    Hi MRK,
    Check  the Status in DC10.
    Also make sure you have configured in dc30
    If possible send me the config file (.cfg)* to [email protected]
    I ll check n revert back...
    Have you done any settings based on document type in CFG file?
    Niranjan
    Award points if useful...
    Edited by: Niranjan Dandekar on Mar 7, 2008 1:42 PM

Maybe you are looking for