Error while saving for Objective setting using tcode phap_catalog_pa.

while executing tcode phap_catalog_pa, i get the error "Table HRPAD605 is not part of customizing Object PDST T.
However, when I proceeded further to use the catalog, I am not able to make any changes and the error message i get is "Data was not saved Message no. HRHAP00_TEMPLATE003".
I also executed the solution mentioned in previous threads on the same problem i.e. run the program "RHSOBJCH" and executed the adjusting entries but to no avail.
I have SAP_ALL authorization profile assigned to me.
Would be really helpful if someone could share their insights on solutions to rectify this problem.
Regards,
Kalpana

Hi Kalpana,
Check the configuration whether you have done it correctly or not.
And try to upload one template which is existing on the system. Download it and upload it as a template.
If the problem is still there then it will be some configuration issues.
Thanks & Regards,
Ganesh R K

Similar Messages

Error while saving for Objective setting

Hi,
While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
Error documentation is as follows
Diagnosis
Entries in table HRPAD605 cannot be edited in connection with customizing object PDST T as table HRPAD605 does not belong to customizing object PDST T, according to the object definition.
System Response
The function terminates.
Procedure
Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
Correct the object definition or the entry for the Transport Organizer interface.
Thanks

Hello,
Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
The report RHSOBJCH corrects the missing HR entries in the OBJS table.
This step you need to perform only once. For OSA you need to overtake
*5020 up to *5026, also PAD605,606 and 607 references.
When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
Hope this helps,
Regards and Groetjes,
Maurice

Error while saving the objects in ID

Dear All,
When I am saving the objects in ID, I am facing with the following error:
[SAP_NWMss][SQLServer JDBC Driver][SQLServer]Could not allocate space for object 'XI_DIRDATACHANNEL' in database 'XD1' because the 'PRIMARY' filegroup is full
Please guide how to solve this error.
Warm regards,
n.jain

Hi Nishu,
ask your xi basis guys to see the disk space of your xi system.........i think the log files of your xi system have consumed too much space on your xi system.... ask your basis guys to make some space available in your xi system then your this problem will be resolved.......
Thanks,
Rajeev Gupta

Improper Format error while saving for previous version

Hi all,
I have been developing some Daq code with LabView 8.5. Recently I needed to open the vi on a computer which has Labview 8. I used the save for previous version option. I used low-level vi's in my code which are both available to 8.5 and 8 instead of using new express vi's. LV warned me about converting fixed point numbers to double precision while saving, which in my opinion should not cause a problem.
I have also enabled "Show front panel when called" and "Show front panel when loaded" options from VI Properties dialog (as adviced by previous threads http://forums.ni.com/ni/board/message?board.id=170&thread.id=369331).
However I was not able to solve the problem. Are there any suggestions to solve my problems?
Thanks.
Gokcen

I dont understand exactly what the problem is.
Have you used fixed point numbers in your code? and if so does it matter if LabVIEW converts them to DBL? If not then dont worry about it.
What problem do you have with the 'show front panel when called' as it isnt clear from your message.
Also, if you can post your problem code as it makes it easier for people to see the problem
David
www.controlsoftwaresolutions.com

SAS Token failed with 403 error while generating for each request using ARR module

Hi,
We are doing an e-Learning application, which plays a course on the browser (inside a div control). The course contains list of static contents such as html, js, css etc., and media files .mp4. We are hosting the static contents (.html, .js, .css etc) into
Azure blob storage and media files into Media Service and CDN.
When user triggers to take a course, the browser first request the Web Role with landing page (Ex: FirstPage.html) and with Course Unique Id - Ex:
https://cloudservice1.cloudapp.net/course/courseid/firstpage.html. We have written a custom ARR Module (http://www.iis.net/learn/extensions/url-rewrite-module/developing-a-custom-rewrite-provider-for-url-rewrite-module),
which receives the request, parse it and generate blob storage url with SAS token using C# code for each file. Then route to blob storage. (we have already passing storage account details to ARR Module using Web.config)
For single user, the course plays fine. But we do the load testing with > 400 user load (with 5 instances), we are getting many 403 errors (and not all files). If the load is less than 200, we don’t get such issue.
Also, we are using REST code to generate the SAS token. When the SAS token expiration time extending more than 60 min, getting error “Access without signed identifier cannot have time window more than 1 hour”. As the code is exist in ARR Module, unable to
refer the Storage Client assembly. This 60 min time interval is for each file request – so there could not be an issue on expiration, but feeling this might be an issue?
Can you please point me what could be the issue and how to solve this. Is the ARR Module caching the SAS token and providing the same even after the expiration time?
Many Thanks, Thirumalai M

hi,
There is a similar thread (http://stackoverflow.com/a/17572316 ), I recommend you could refer to it.
And I'd like to know how to set the expiry time in your code, and you could see this page (http://azure.microsoft.com/en-us/documentation/articles/storage-dotnet-shared-access-signature-part-1/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Type Mismatch error while saving a BPC Report using eTools

Hi,
Iam getting a 'type mismatch' error when trying to save a BPC Excel workbook using eTools>Save Dynamic Template >Company>eExcel. I am saving it as an .xlsx file.
Can anyone please help out and let me know why I am getting this error.
Thanks
Arvind

Hi,
You need to save the file as .xls extension.

Error while saving file to database using messageFileUpload

Hi,
In my OA Page I have messageFileUpload to save the file to a database. I have a custom stored procedure that I call in the AM that takes the file as BLOB and insert it into the table. My problem is for smaller files it works fine but as soon as I try to save a larger file i.e. over 0.5 MB I am getting the following errors. Sometime I get size error sometimes I get unreasonable conversion requested error. How can I solve this so it takes any size of file and save it.
Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: Data size bigger than max size for this type: 2251264;
Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-01460: unimplemented or unreasonable conversion requested ; Here is what I have in my Controller code snippet
BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, fileName);
Serializable[] parametersFile = { fileName, contentType, fileSize, uploadedByteStream };
Class[] paramTypesFile = { String.class, String.class, Long.class, BlobDomain.class };
am.invokeMethod("saveFile", parametersFile, paramTypesFile);Here is the AM method that also invokes the Stored Procedure and pass the file as BLOB to save
conn = (OracleConnection)dbTransaction.getJdbcConnection();
cStmt = (OracleCallableStatement)conn.prepareCall(
"{CALL FILE_PKG.saveFile(:1, :2, :3, :4)}");
cStmt.setString(1, fileName);
cStmt.setString(2, fileContentType);
cStmt.setNUMBER(3, new NUMBER(fileSize.intValue()));
cStmt.setBinaryStream(4,uploadedFile.getBinaryStream(),fileSize.intValue());Any help is appreciated.
Thanks

I was able to resolve it and used the below code just in case if anyone else trying to save the BLOB
byte[] barray = uploadedFile.getBytes(0,fileSize.intValue());
oracle.sql.BLOB data = oracle.sql.BLOB.createTemporary(conn, true, BLOB.DURATION_CALL);
data.putBytes(1,barray);
cStmt.setBlob(4,tempBlob);

Error While Saving Mapping For A Dimension

I am getting The Error While Saving The mapping For a Dimension
Any Clue?
An error occurred creating DimensionMapGroup BROKERS.MAPGROUP1.DIMENSIONMAPGROUP : ***Error Occured in
DELETE_MAPPING_GROUP: Analytic workspace object __XML_STARTUP_CALCMMBRS does
not exist.
Thanks
Raghu

Check the OSS note 550760 regarding the issue.

Error while saving Prod order - "Class for order classification"

Hi all
I am getting the following error while saving the Production Order -
"Class for order classification has not been generated".
I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
Any help would be highly appreciated.
Thanks in advance.
Hrishi

Solved

Error while getting data objects for instance

Hello Expert,
I am getting some weird error - whenever there is a new process is triggered and I check context Data, I get following error -
"Error while getting data objects for instance processinstanceid"
Thanks is advance
Priya

Hi Priya,
this is a known issue in the xml processing of the Java Virtual Machine. Please refer to the SAP Note for this issue: 1949395
This should solve your issue.
Best regards,
Stefan

Error while saving project in cProjects

Hello,
I am getting following error while saving a project in cProjects-
Access via 'NULL' object reference not possible.
Details of the error are given below-
Can somebody please help me resolve this error?
Thanks and regards,
Milind Dumbre
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
      caught in    procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "LR_CALC").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.

Hi Milind,
You may check the settings by navigating to the following path
IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
--> Define Object Links for Accounting Integration.
Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
Let me know if this helps.
Regards,
Vivek Pandey

Error While Saving Workbook

Dear All,
We are getting following error while saving workbook. This has started after our migration from IBM server to HP Unix server.
"Document store access caused errors in the SAP Correction System"
Thanks in advance.
Regards: Gaurave

Hi,
During the save of the workbook a transport check is done and that check fails. The reason for that is "Client independent objects not changeable in this client" Or "System is not set to changeable - objects are not changeable" The solution to the problem is "Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4."
Note 992965 is relevant here.
- RSA1 -> transport connection ->object changeability -> check the object type:XLWB(workbook)
If the setting is 'Not Changeable', please change it to 'Everything Changeable' by right mouse click.
Rgds
Manoj Kumar

Error while saving date value in Java dictionary

Hello Everybody,
I got following error while saving date value in one of the fields of the Java table.
Internal error occured in submit request: Error in method updateRequestContact : The object of type java.sql.Date with the value '2005-12-04 08:00:00.0' assigned to host variable 9 is not normalized. It must not contain time components in the time zone running the virtual machine.
I can't find why it is taking time value in the date object.
This value is coming from the RFC as a date value, and I am saving this value in Java dictionary table.
Same code for this was working fine earlier. But, now suddenly it gives error like this.
Even if I provide date on the screen from webdynpro application, this date value can't save in the Java dictionary and gives same error.
What should be the problem behind this?
Regards,
Bhavik

Hi Satyajit,
I am getting date value from the screen of the webdynpro application from date picker control and passing this value in Java dictionary.
More Information:
I have dat value in the Date object: target_date
But Now I have made new Date object as following:
Date target_Date1 = new Date(target_date.getYear(),target_date.getMonth(),target_date.getDate());
Then I am passing this object to Java dictionary. Still it gives same error.
Then I have changed code as following:
 int l_year;
 int l_month;
 int l_days;
 l_year = target_Date.getYear();
 l_month = target_Date.getMonth();
 l_days = target_Date.getDate();
 Date target_Date1 = new Date(l_year,l_month,l_days);
Now it works for me.
But I guess this is not the perment solution. It looks very strange. I have used so many date objects at various palces. So, this solution is not the final for me.
I want to findout the main cause of it.
One more thing: This code was working for a mornth or two. But, now suddenly it is giving this error.
Please help me if anybody knows.
Regards,
Bhavik

Error while saving INtial stock upload thru t-code MB1C

I am getting an error while saving the entered material quantity for initial stock overload thru MB1C
the error is "FOr object RF_BELEG GB10, number range interval 49 doesn't exist FBN1..
I am from SD module. Please help me resolve this issue.
THank you
Brian

Dear Brian
When you are carrying out the MB1C Txn, system document for account ing for the current is not existing, so you are getting this error.
Use FBN1 you will bet the screen Number Ranges for accounting Documents enter Your company code here "XXXX" then click the Intervals push button, you will go to the screen maintain number range Intervals , Check for 49 serial number whether you are having a number range for the current period if not then use the Insert Interval + button and enter 49 ,Year and the from & to number ranges. You can repeat the last years no. range in the current year also.
Best Regards
SAM
Edited by: samuel mendis on Apr 8, 2009 6:26 AM

WCM Error while saving Project

Hi,
I am getting following error while saving new created project in cProject.
Saving is not possible because the WFM Core data could not be adjusted
Message no. PRP086
Diagnosis
When checking the project role or project role staffing, differences to the related WFM Core data were found. The project cannot be saved because the data cannot be adjusted. Possible causes for this include:
The WFM Core is not installed locally. When working with the application, the WFM Core service is suddenly no longer available.
The WFM Core configuration has been changed in Customizing.
The WFM Core is only activated after projects have been created. During the automatic adjustment of data, it is determined that resources unknown in the WFM Core are assigned to existing project role staffing.
When working with the application, an existing resource already assigned in the WFM Core is deleted.
System Response
The project cannot be saved.
Procedure
Contact the system administrator if the required resource is not known in the WFM Core. The project can be saved as soon as the resource is created.
Let me know how to resolve this issue??
Thanks in advance,
Atul.

hi Atul,
Are you using WFD server for your resource planning in cProjects???
If yes, you have to do settings in customizing for the same in Workforce deployment server under Resource Management in cProjects.
If not, then do following settings to remove the error you are getting:
1) SPRO -> Collaboration Projects -> Resource management-> Business Partner-> Set Up Integration of HR,
Maintain following setting:
Group Sem. abbr Value abbr Description
HRALX HRAC X Activate HR Integration
2) SPRO -> Collaboration Projects -> Resource management Qualification Management-> Activate Qualification Search and Matchup Using WFM Core
In this, deactivate the use of WFD Core for the qualification match up and the search by deleting the X under Value abbr. in the activity Activate Qualification Match up and Search Using WFM Core.
Hope this will be helpful to you.
Regards,
Niraj Sikligar

Error while saving for Objective setting using tcode phap_catalog_pa.

Similar Messages

Maybe you are looking for