Error while saving full path in Console properties

Hi All,
to open the mounted servers automatically from .mcs file i tried to change the target field in the console properties by R clicking and selecting properties from the console shortcut Icon from desktop
i mentioned the full path with _f as prefix
Eg: -F C:\documents and settings\SAP MDM Servers.mcs
Error : "Name -f specified in the target box is not valid. make sure the path and file name are correct."
Please help
Regards,
Sharma

Hello Deepak
I tried putting it as _F insted of -f but i am getting the same error. i have saved it on the desktop and i am mentioning the complete path of the .mcs file.
i am still getting the same error
Regards,
Sharma

Similar Messages

Error while trying to save layout:Console layout (Access is denied)

Got an error while trying to save changes made in the layout,
The error message is
1) 'Preference.properties' (Access is denied), In the details button 'java.io.FileNotFoundException...'
2) and on continuing futher, another message displayed is - 'Error while trying to save layout:Console layout (Access is denied)
There is no Oracle Error Number associated with this message. It is a Oracle Warehouse Builder Error
I have checked that
1) this file exist in owb home/owb/bin/admin/Preference.properties
2) It is not read only
3) tried to set a parameter REPOS_DB_VERSION_ALLOWED=Oracle 10g
as specified in the Installation and Admin Guide
Please can you help?

Also, not that you shouldn't get to the bottom of this, but you should be aware that any of your development or mapping changes are likely still being saved to the respository.
In other words, you could continue working and just ignore these errors. We ran into this situation (it was indeed simply file permissions on the owb directories), but we noticed right away that at least our actual OWB work was in fact still being committed to the respository every time.

I keep getting "Unknown Error while saving"

I keep getting "Unknown Error while saving"
Using APE-11 on Windows 7- This error is a first for me, after many years of using Premiere. The product is a mix of photos (jpg and png), video clips (mpg-2 and mp4), and audio clips (all mp3). When I try to publish as Standard DVD- MPEG-2. I get the error. Error repeats saving as MP4. Error gives no location on the timeline where it is running into an obstacle to saving, so I do not know where to begin looking to remove repair or replace the item causing the 'unknown error'. The prel runs fine, start to finish, giving no indication that the save may run into a problem on final rendering.
I have tried many different options like rendering the entire timeline prior to saving, converting the clips to all be the same format, with no resolution to the problem.
I have worked many long hours for many weeks on this project, and I am not going to give it up, especially when the majority of the clips were created on APE in the first place, and the images are all Photoshop edited images
HELP PLEASE!!
DougN

Screenshot of error message for above issue
Also: Since first report, I have attempted render with all sound clips removed (easiest to to with hundreds of clips/photos), with no help. Same error appears.
I will continue removing aspects of the project until I get a completed save, or until I get an answer here!
After removing the sound and video clips, video saved ok, with blank spots where the missing video clips were. So I reopened the original prel file, and began checking them individually.
When I checked the clip properties, it correctly identified the path to the source video, but when I asked it to 'reveal in project', I got this error
So I assume this is where the SAVE error is happening, but as I am not an Adobe coder, I have no idea what it is telling me.
I did check to insure that the source video from which this clip originates, is in the project assets. I checked all the other clips as well, and any clip from this source video, generates the same error.
The source video runs fine on its own and is an mpeg-2 file.
Properties of the source video are:

Error while saving project in cProjects

Hello,
I am getting following error while saving a project in cProjects-
Access via 'NULL' object reference not possible.
Details of the error are given below-
Can somebody please help me resolve this error?
Thanks and regards,
Milind Dumbre
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
      caught in    procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "LR_CALC").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.

Hi Milind,
You may check the settings by navigating to the following path
IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
--> Define Object Links for Accounting Integration.
Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
Let me know if this helps.
Regards,
Vivek Pandey

Error while saving

Hello Experts,
I am facing an issue while saving a BO. We have a Z-BO which works very well in 4.0. We have upgraded to 7.0 and we are facing the issue while trying to save an entry from the list tile.
The BO is configured as a child segment of BDOC CAPGEN_OBJECT_WRITE. We have a Z-table which should be populated with the grid entry details.
When I try to save, it raises an error "Error while saving", and if I check the error from the Windows menu, I can see the context as "UI_CORE_SAVE_FAILED_STA". Any idea if there may be issue with Anchor mapping or something else?
I tried debugging it and it does not stop anywhere. It seems that this is not due to programming logic. I am stuck here for quite sometime. Kindly advise.
Appreciate your valuable feedback on this. Thanks in advance.
Regards
Pijush

Hi Wolfhard,
Thanks for your reply.
The table is generated successfully in the laptop - there is no error when I generated the table using client console. Do I need to check anything else in this regard?
Regarding the BDOC, this Z-table (and BO) is mapped as a child segment of BDOC CAPGEN_OBJECT_WRITE (which is a Synchronization (Write) BDoc). When the system is upgraded (from 4.0 -> 7.0), the Z-segment was missing in Sandbox system. I have added the Z-segment again to BDOC CAPGEN_OBJECT_WRITE based on the old system (4.0) details.
Will there be a chance of impact due to that due to upgrade? Any other things to check? Appreciate your help.
Regards
Pijush

Error While Saving As PDF

Hello,
We are on HFM 11.1.2.1.103 and financial reports 11.1.2.1.00 and I am having an issue when running a report batch. I have a batch that I run each month which contains a few reports which are emailed out to users. For some reason, the second time the batch runs on one of the reports for a different entity (using bursting on the entity) I get the below error message.
Error while saving as PDF
Index: 3, Size: 3
Any thoughts? The email goes out fine and the other reports are fine.
Thanks,
Jason

Check KM article id 1504257.1.
It says following solution :
1. On the FR server, navigate to Oracle \ Middleware \ EPMSystem11R1 \ products \ financialreporting \ bin.
2. Double-click FRConfig.cmd.
3. When the Java window (Java Monitoring & Management Console) pops up, click on the MBeans tab.
4. Expand com.hyperion > Financial Reporting > Attributes.
5. Locate the PrintServers entry. Remove any invalid server names from the Value field.
6. Stop and start the Hyperion Financial Reporting Web Application.

While specifying file in LSMW it is giving an error while saving 'No logica

while specifying file in LSMW it is giving an error while saving 'No logical path has been specified'.why it is coming like that?

Hi Shree,
This error looks like that you have attached the activity to the work center and there is no rate has been maintained in KP26. Please maintain the activity ...for1000/300008/LABORP
for the period and try to repeat the costing run.
I hope this clarifies...
Regards
Rajesh A

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while Scheduling Full DB back up?

Hi gurus,
I got error while schedule full DB back up. I am follow all the steps.but i got this error.
1. go to DB13
2. select Day
3.select full DB backup
4.select time
5.select sid, msdb,inttape,verify backup
5.add.
our DB is MS-SQL server Data Base
client :222   user: admin
error: User not connected
2008-04-10 14:28:06.89 Server      Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
     Apr 14 2006 01:12:25
     Copyright (c) 1988-2005 Microsoft Corporation
     Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-04-10 14:28:06.89 Server      (c) 2005 Microsoft Corporation.
2008-04-10 14:28:06.89 Server      All rights reserved.
2008-04-10 14:28:06.89 Server      Server process ID is 308.
2008-04-10 14:28:06.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2008-04-10 14:28:06.89 Server      This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
2008-04-10 14:28:06.89 Server      Registry startup parameters:
2008-04-10 14:28:06.89 Server            -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2008-04-10 14:28:06.89 Server            -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2008-04-10 14:28:06.89 Server            -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2008-04-10 14:28:06.90 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-04-10 14:28:06.90 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2008-04-10 14:28:07.06 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2008-04-10 14:28:07.20 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-04-10 14:28:07.21 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Database mirroring has been enabled on this instance of SQL Server.
2008-04-10 14:28:18.89 spid4s      Starting up database 'master'.
2008-04-10 14:28:18.96 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-04-10 14:28:19.00 spid4s      SQL Trace ID 1 was started by login "sa".
2008-04-10 14:28:19.01 spid4s      Starting up database 'mssqlsystemresource'.
2008-04-10 14:28:19.04 spid4s      The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid4s      Server name is 'ERPPRD'. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid9s      Starting up database 'model'.
2008-04-10 14:28:19.29 spid9s      Clearing tempdb database.
2008-04-10 14:28:19.37 spid9s      Starting up database 'tempdb'.
2008-04-10 14:28:19.39 spid9s      Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:19.40 spid12s     The Service Broker protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     Service Broker manager has started.
2008-04-10 14:28:19.42 Server      A self-generated certificate was successfully loaded for encryption.
2008-04-10 14:28:19.43 Server      Server is listening on [ 'any' <ipv4> 1433].
2008-04-10 14:28:19.43 Server      Server local connection provider is ready to accept connection on [
.\pipe\SQLLocal\MSSQLSERVER ].
2008-04-10 14:28:19.43 Server      Server named pipe provider is ready to accept connection on [
.\pipe\sql\query ].
2008-04-10 14:28:19.43 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2008-04-10 14:28:19.43 Server      Dedicated admin connection support was established for listening locally on port 1434.
2008-04-10 14:28:19.43 Server      The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-04-10 14:28:19.43 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-04-10 14:28:19.48 spid21s     Starting up database 'msdb'.
2008-04-10 14:28:19.48 spid23s     Starting up database 'SRM'.
2008-04-10 14:28:19.48 spid22s     Starting up database 'PRD'.
2008-04-10 14:28:20.29 spid23s     Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.40 spid22s     Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2008-04-10 14:28:26.37 spid51      Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.53 spid51      Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.57 spid51      Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-04-11 00:00:56.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
2008-04-11 16:44:23.89 spid112     DBCC CHECKDB (PRD) started at Apr 11 2008 4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 16:52:47.53 spid107     DBCC CHECKDB (PRD) started at Apr 11 2008 4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 17:00:01.48 spid115     DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
2008-04-11 17:00:10.45 spid115     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:10.45 spid115     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:10.67 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:10.65 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:10.65 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:11.18 Backup      Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.54 spid101     DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
2008-04-11 17:00:15.60 spid101     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:15.60 spid101     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.60 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:15.60 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:02:57.57 spid114     DBCC CHECKDB (PRD) started at Apr 11 2008 5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 18:30:37.75 spid112     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
2008-04-11 18:54:52.10 spid114     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
2008-04-11 18:55:25.00 spid107     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
2008-04-12 00:00:30.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
This is error
anybody help me.
Regards,
balaram
Edited by: balaram reddy on Apr 14, 2008 8:44 PM

If your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79

Error while accessing secure store: File "SecStore.properties" does not exi

Hi ,
I have a java desktop application, and i am trying to get a connection from a datasource deployed on one SAP AS Java, I can get the datasource succsfullly but when i try to get a connection from the DS, it throughs this exception, I put the secstore..properties file in the classpath even after that it is not happy,
any solution/hint/light please!!!!
com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "SecStore.properties" does not exist although it should..
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
     at com.sap.customcode.ConflictingActionFixture.(ConflictingActionFixture.java:53)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at fit.FixtureClass.newInstance(Unknown Source)
     at fit.FixtureLoader.instantiateFixture(Unknown Source)
     at fit.FixtureLoader.instantiateFirstValidFixtureClass(Unknown Source)
     at fit.FixtureLoader.disgraceThenLoad(Unknown Source)
     at fit.Fixture.loadFixture(Unknown Source)
     at fit.Fixture.getLinkedFixtureWithArgs(Unknown Source)
     at fit.Fixture.doTables(Unknown Source)
     at fit.FitServer.process(Unknown Source)
     at fit.FitServer.run(Unknown Source)
     at fit.FitServer.main(Unknown Source)
Caused by: com.sap.security.core.server.secstorefs.FileMissingException: File "SecStore.properties" does not exist although it should.
     at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
     at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
     at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
     at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
     ... 18 more
caused by

the SecStore.key file was not there, I changed the passwd and checked the 'Encryption' on, after that my sever instance is not starting.
Any idea?
-Puneet

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

Error while saving FYV : Gaps in financial year variant periods

Hello Experts,
We are getting an error while saving a new FYV as:
Gaps in financial year variant periods XY
Message no. FGV556
Diagnosis
The period specification has gaps. The periods must be sequentially numbered without any gaps.
System Response
Only a correctly defined period assignment can be saved.
Procedure
Define the periods with consecutive numbers.
Details: The new FYV has 52/53 weeks as posting periods depending on calendar year.
For example, we are trying to define Fisc 2009 as follows. (Fiscal year 2009 = Nov 01 2008 to Oct 31 2009).
Month-Day-Period-Yearshift
11     ---     7     ---     1     ---     +1
11     ---     14     ---     2     ---     +1
11     ---     21     ---     3     ---     +1
11     ---     28     ---     4     ---     +1
12     ---     5     ---     5     ---     +1
12     ---     12     ---     6     ---     +1
12     ---     19     ---     7     ---     +1
12     ---     26     ---     8     ---     +1
12     ---     31     ---     9     ---     +1
1     ---     3     ---     9     ---     0
1     ---     10     ---     10     ---     0
1     ---     17     ---     11     ---     0
1     ---     24     ---     12     ---     0
1     ---     31     ---     13     ---     0
2     ---     7     ---     14     ---     0
2     ---     14     ---     15     ---     0
2     ---     21     ---     16     ---     0
2     ---     28     ---     17     ---     0
3     ---     7     ---     18     ---     0
3     ---     14     ---     19     ---     0
3     ---     21     ---     20     ---     0
3     ---     28     ---     21     ---     0
4     ---     4     ---     22     ---     0
4     ---     11     ---     23     ---     0
4     ---     18     ---     24     ---     0
4     ---     25     ---     25     ---     0
4     ---     2     ---     26     ---     0
5     ---     9     ---     27     ---     0
5     ---     16     ---     28     ---     0
5     ---     23     ---     29     ---     0
5     ---     30     ---     30     ---     0
6     ---     6     ---     31     ---     0
6     ---     13     ---     32     ---     0
6     ---     20     ---     33     ---     0
6     ---     27     ---     34     ---     0
7     ---     4     ---     35     ---     0
7     ---     11     ---     36     ---     0
7     ---     18     ---     37     ---     0
7     ---     25     ---     38     ---     0
8     ---     1     ---     39     ---     0
8     ---     8     ---     40     ---     0
8     ---     15     ---     41     ---     0
8     ---     22     ---     42     ---     0
8     ---     29     ---     43     ---     0
9     ---     5     ---     44     ---     0
9     ---     12     ---     45     ---     0
9     ---     19     ---     46     ---     0
9     ---     26     ---     47     ---     0
10     ---     3     ---     48     ---     0
10     ---     10     ---     49     ---     0
10     ---     17     ---     50     ---     0
10     ---     24     ---     51     ---     0
10     ---     31     ---     52     ---     0
The above entries cover all the dates in calendar year 2009, that is, Jan 2009 to Oct 2009 is covered by periods 10 to 52 and Nov 01 2009 to Dec 31 2009 is covered by period 1 to 9 of the following fiscal year 2010.
Inspite of making sure that all the days of 2009 are covered by periods 1 to 52. We are still unable to save the FYV.
Please help!
Susan

Hello, I am getting this error while saving the FSV. My FSV is based on Weeks. Below is what I am inputting for this. Other details are Calender Year - 2017, No. of posting periods - 53, checked year dependent. Also, I have FSV for previous years also where weeks are 52 but configured as 53. So, hope that this is not creating this issue. Solicit your early response.
Month
Day
Period
Year Shift
1
7
1
0
1
14
2
0
1
21
3
0
1
28
4
0
2
4
5
0
2
11
6
0
2
18
7
0
2
25
8
0
3
4
9
0
3
11
10
0
3
18
11
0
3
25
12
0
4
1
13
0
4
8
14
0
4
15
15
0
4
22
16
0
4
29
17
0
5
6
18
0
5
13
19
0
5
20
20
0
5
27
21
0
6
3
22
0
6
10
23
0
6
17
24
0
6
24
25
0
7
1
26
0
7
8
27
0
7
15
28
0
7
22
29
0
7
29
30
0
8
5
31
0
8
12
32
0
8
19
33
0
8
26
34
0
9
2
35
0
9
9
36
0
9
16
37
0
9
23
38
0
9
30
39
0
10
7
40
0
10
14
41
0
10
21
42
0
10
28
43
0
11
4
44
0
11
11
45
0
11
18
46
0
11
25
47
0
12
2
48
0
12
9
49
0
12
16
50
0
12
23
51
0
12
30
52
0
12
31
1
+1
Thanks
Deepankar

Error While Saving Mapping For A Dimension

I am getting The Error While Saving The mapping For a Dimension
Any Clue?
An error occurred creating DimensionMapGroup BROKERS.MAPGROUP1.DIMENSIONMAPGROUP : ***Error Occured in
DELETE_MAPPING_GROUP: Analytic workspace object __XML_STARTUP_CALCMMBRS does
not exist.
Thanks
Raghu

Check the OSS note 550760 regarding the issue.

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

Error while saving full path in Console properties

Similar Messages

Maybe you are looking for