Error while saving in Master Detail Form

Hi,
I created a MD form in Portal. The form shows up fine. When I try to enter data at the master level and hit Save, I get the following message:
An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWV-16016)
Please let me know how to fix this?
Thanks

I am still new to this, but maybe this will help.
1. Double check that your foreign key link definition in the detail table is referencing the correct column in the master table. If this is not present or referencing the column, this may be causing the problem. Self evident, but sometimes it is the simple things that get us.
2. I have not used a trigger yet, but could there be validation being done in the form before the trigger is firing. Therefore, there would not be a value in the detail part of the form.
Hope this was of some help.

Similar Messages

Error while creating the master-detail forms

on creation of a new master-detail form or on edit of a existing master-detail form, i get the following error -
******** START ERROR **********
Thu, 15 Mar 2001 23:02:16 GMT
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "CC_INTRANET.WWV_BIND", line 56
ORA-06512: at "CC_INTRANET.WWV_UI_LOVF", line 3123
ORA-06512: at "CC_INTRANET.WWV_UIFORM_BUILD", line 2850
ORA-06512: at "CC_INTRANET.WWV_UIFORM_BUILD", line 5567
ORA-06512: at line 8
DAD name: cc_intranet
PROCEDURE : CC_INTRANET.wwv_uiform_build.show_header
URL : http://webdb.us.colorcon.com:7777/pls/cc_intranet/CC_INTRANET.wwv_uiform_build.show_header?p_wizard_mode=MASTER&
********** END ERROR ********
any ideas anyone ... ?
thanx in advance ...
null

more information on above -
i upgraded webdb 2.2 to portal 3.0.6 and the new master-detail form is been created in the upgraded site.
pls reply on this.
thanx a bunch
null

HELP: Error while insert in master-detail form!!!

Hello
I have created a master-detail form and when I tried to insert a new record I got an error that the field on the detail table that references the primary key on the master table can not be null. I don't understand this error because I thought that when you create a master-detail form and you insert a new record the field that make the references in the detail table to the primary key on the master table will be automatically filled, am I wrong??. Can anybody tell me what is going on??. The primary key of my master table is filled with a trigger before insert, is that the problem??.
Please Help me is really urgent
Ana Maria

I am still new to this, but maybe this will help.
1. Double check that your foreign key link definition in the detail table is referencing the correct column in the master table. If this is not present or referencing the column, this may be causing the problem. Self evident, but sometimes it is the simple things that get us.
2. I have not used a trigger yet, but could there be validation being done in the form before the trigger is firing. Therefore, there would not be a value in the detail part of the form.
Hope this was of some help.

Apex - Error in Checksum in Master-Detail Form Page

The following error message is thrown in a Page with a Master-Detail Form in Apex ,
ORA-20505: Error in DML: p_rowid=362, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "71064C738DA3DADD5500149404378CFF" application checksum = "0"
Error Unable to process row of table "table-name".
Somebody can tell me what is happening ? Thanks.

Please check this thread ORA-20505: Error in DML : ORA-20503: . There is a detailed discussion on the same error.

Error "field required" in master-detail form with FORMS 10G!!

I have a Master-Detail Form.
When the cursor stay in detail block and i chage the master record with the mouse, clicking in scroll bar, i get error "field required".
In Forms 6i, works fine!!

Master block has more than one record displayed. When I click on any item in detail (except first one) and then click on different master record (return navigation to master block, but not current record) I have FRM-40202: Field must be entered on first item in detail block.
I found that reason is this part of clear_all_master_details procedure (automatically created by Oracle Forms):
IF :System.Cursor_Item <> startitm THEN
Go_Item(startitm);
Check_Package_Failure;
END IF;
Does any have same experience?
Is it Oracle bug or I am missing something?

Error in Master Detail Form

Hi All,
i m getting the following error when i m creating a master entry ...
ORA-06550: line 5, column 23: PL/SQL: ORA-02289: sequence does not exist ORA-06550: line 5, column 16: PL/SQL: SQL Statement ignored ORA-06550: line 8, column 16: PLS-00364: loop index variable 'C1' use is invalid ORA-06550: line 8, column 9: PL/SQL: Statement ignored
but while creating the master detail form i had specified the corresponding sequences and they even exist in the DB.
Please ! do help me .
Thanks & Regards,
Nandini Thakur.

Hi ,
Though u choose the schema name ...the sequence is not appended with the schema name .
Example you are craeting the application in schema 1 and ur database objects are in schema 2.
so while creating the Master detail form you will get the option of choosing the schema, but then also the sequence name is not appended (as this may be the problem or bug in apex) .
so one needs to manually go and append the schema name.
In master detail form one needs to append it
1) Form of the Master ...the process called as get primary key there the sequence name should be appended
ex:- myschema.seq
2) another is the detail tabular form . here you need to good to the id hidden field and edit it , then in the source column append it with the myschema.seq.
Regards,
Nandini Thakur

FRM-40654 error in master-detail form while deleting record in detail block

Hi,
I am facing an issue in a custom form which is a Master-detail form while deleting a record in detail block. It is giving an error "FRM-40654 Record has been Updated by another user. Re-query to see change". I have checked the record is matching with that in database.
Can anyone help on this.
Thanks In Advance,
Midhun

Hi jan,
master block is based on Table "A" and detail block is based on a View "X".
View "X" definitions includes the tables "A","B","C" etc..
Now I have tried removing table"A" from view "X", even then the same error is ocuuring but the lock is happening on table "B" instead of "A"
Thanks,
Midhun

Error while saving masterdetail form

Hello all!
I am getting the following error while trying to use nextval of a sequence in the ID column in the master detail form.Please help me out.
Exception from wwv_generate_component.build_procedure (WWV-01821)
Error creating module: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWV-16042)
Error creating module: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWV-16042)
Error adding module attributes: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWV-16043)
Thanks in advance.

Hi Madhu
You can't write the insert for sequence.nextval in default of id field....Please go to insert code and write the following pl/sql code it will work..
declare
get_id number;
begin
--- get the primary key value from sequence
select (schema name).(table name).SEQ_ID.NEXTVAL
into get_id
from dual;
--- set the primary key
p_session.set_value(
p_block_name => p_block_name,
p_attribute_name => 'A_ID',
p_value => get_id,
p_index => p_instance);
doInsert;
end;
If it doesn't work please post the error code so that i can help you out...
Vishnu

Is this a bug? master rowid value lost when saving on a master/detail form

master/detail forms seem to lose the rowid after saving, if the unique identifier is set to ROWID
to reproduce the problem:
1) create a master detail form on DEPT/EMP
-- choose 'Managed by Database (ROWID)' on the 'Define Primary Key' page.
-- do not include master row navigation (but i don't think this matters)
-- choose 'Edit detail as tabular form on same page' on the 'Choose Layout' page
-- include the master report
2) on the master/detail page, change the conditional branch that returns to the master report page
-- the normal condition for this branch is request in SAVE,DELETE,CREATE
-- change it to request in DELETE,CREATE
3) run the form and save a change
-- saves fine, session shows the ROWID value is still set
4) save a second change
-- change does not save, form reverts to Create mode
this problem does not occur when using the primary key columns instead of rowid
see http://apex.oracle.com/pls/apex/f?p=60813:7 for the ROWID version
see http://apex.oracle.com/pls/apex/f?p=60813:11 for the PK column version

Hi Saverio,
Bug *13563808* has been logged to track the reported issue, and a fix will be made available in a future release. Just to clarify, this issue is only arising when the APEX-generated Master-Detail is modified post-generation, so for users who have not modified their Master-Details using ROWID to manage their DML processes, they should not experience this issue.
In relation to my workaround, my suggestion works in my test environment, which I verified before posting the initial suggestion. Please note that the 'Reset Page' process is, by default, conditional on the "Delete" button being pressed. If you have made further modifications to your Master-Detail page, then this might explain why you're seeing different behaviour to me. You might using the "Debug" option on the Developer Toolbar useful. Viewing the debug information should help you to decipher what's going on/wrong on your page. If you still can't resolve the issue, then the safest option might be to revert the page back to it's original state, meaning the user navigates back to the Report page upon submitting changes to the Master-Detail Form page.
Regards,
Hilary

Error while saving data form in planning

Hi,
We are getting the below error while saving the data form in planning
"There was an error during the save process"
i believe our form is not exceeds 255 columns we were able to access the same form till yesterday
can any one please help me on this

One reason could be that the blocks that you are trying to save are locked either through excel-addin or someone else might be updating the same combinations. I have encountered such issues earlier and got the same error. Check if there are any locks in essbase while you are saving the planning data.

Insert error in master-detail form

Probably a stupid question. When I populate the master block of
a master detail form from an LOV, I am asked to save the form.
Since the information is loaded from the LOV, there are no
changes to save. If I answer yes, it gives an Insert error due
to the primary key violation in the master block table. If I
answer no, it opens the detail block and gives the correct
information. The problem is that when I enter information into
the detail block and try to save it, I get the same error
message regarding the primary key violation in the master block.
The form works fine if I do not populate the master block from
the LOV (or from select statements in triggers). Any suggestions
will be appreciated.
LS

Hi,
Check for the form or block status.Looks like the status has
changed.Thats why u r getting the message.If any of the base
table item has changed then u will get such a message.Try
working on this an check it out.
Thanks
Vinod

Master Details Forms- Report getting error

Dear All,
I have used master details form . In details form , i am having 50 fields . i am able to add row. after that it is showing error ike below.
Error:
=============================================================================
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "D63F13336F2D8570B20FC4825A7B836A", item checksum = "809B7E0170040C75637E80BE2D464C77"., update "SIFY"."REG_MANAGER_DETAILS" set "RMD_ID" = :b1, "RMD_RM_ID" = :b2, "RMD_ACMAN_NAME" = :b3, "RMD_CONN_OT_CUR" = :b4, "RMD_CONN_RS_CUR" = :b5, "RMD_CONN_HW_CUR" = :b6, "RMD_HOST_OT_CUR" = :b7, "RMD_HOST_RS_CUR" = :b8, "RMD_HOST_HS_CUR" = :b9, "RMD_EAS_OT_
=============================================
What will be solution to resolve this type of error ?
Please help me to resolve this. Thanks in advance.
Regards
Dhanush.R

Dhanush,
This is an optimistic locking checksum error. It's trying to tell you that it can't save because someone/thing has updated the data already and it doesn't want to overwrite it. Is that always occurring?
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/

Master detail form Error in mru internal routine: ORA-20001

Hi,
i created a master-detail form with apex standrad wizard.
Master e datail are on the same page.
All works fine.
My detail form contain some fields of my detail table.
Now i added a link on detail form for call a form with all fields of my detail table.
The link work fine.
When i try to add row or update my detail form i receive the error
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "D472A2BF636CA11122F196B8A32B3DC8", item checksum
Any help?
Thanks in advance
Lukx

Lukx,
I've just reproduced your what I believe you wanted and didn't receive any errors. Here are the steps I took.
1) Used the wizards to create a Master Detail form (with Detail edit on the same page as the master and only showing 2 of the detail columns)
2) Used the wizard to create a FORM ON A TABLE for my detail table allowing the user to edit all detail columns
3) Created a "column link" column on the detail form of the Master Detail form which links to the FORM ON A TABLE, passing across the ID of the detail record.
When I do this, everything seems to work perfectly as expected.
Is there something I'm missing in the steps you performed to create your scenario?
Thanks
Doug
http://www.sumneva.com

Session storage errors in master-detail form

hi,
as the sequences do not work in master detail forms, i'm using session variables but the form does not compile and gives error.
following is my code in the SAVE button of the master-detail form -
declare
new_prod_id number(10);
begin
select BPSIDEV.PRODUCT_ID_SEQ.NEXTVAL
into new_prod_id
from dual;
p_session.set_value
p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_PRODUCT_ID',
p_value => new_prod_id
doSave; -- This is generated code
end;
the action item values is as foloows -
Master - INSERT
Detail - INSERT
am i missing here something ? or is anything wrong here ?? pls advise ...
after the above changes the form would not compile at all.
also how would i populate the the detail records with the foreign key ??
thanx...
null

This problem is fixed in 3.0.8 release of Portal which will be available with the next release of iAS.
Actuallty the fix is simple look at the generated package of EXAMPLE_MD_FORM from EXAMPLE_APP, onSave event handler looks like this:
procedure onSave
p_block_name in varchar2,
p_object_name in varchar2,
p_instance in integer,
p_event_type in varchar2,
p_user_args in varchar2,
p_session in out WWV_30898.wwa_api_module_session
is
"_master_block" varchar2(30) := 'MASTER_BLOCK';
Some more code.......
And then closer to the end in detail processing section there is something like:
"_d_data_rec".COMM:=p_session.get_value_as_NUMBER(
p_block_name => "_detail_block",
p_attribute_name => 'A_COMM',
p_index => "_cnt"
"_d_data_rec".DEPTNO:=p_session.get_value_as_NUMBER(
p_block_name => "_detail_block",
p_attribute_name => 'A_DEPTNO',
p_index => "_cnt"
===========================================
You'll need to insert following code, just one if statement, that's it. Please note every time you regenerate the package this code will be lost, so you'll need to add this agains and again. Not a perfect solution, that's why I like JS workaround better.
============================================
if "_d_data_rec".DEPTNO is NULL and "_m_data_rec".DEPTNO is NOT NULL
then
"_d_data_rec".DEPTNO := "_m_data_rec".DEPTNO;
end if;
============================================
============================================
if "_detail_action" = 'DELETE' and "_DETAIL_ROWID" is not null then
DELETE FROM WWV_30898_DEMO.EMP WHERE ROWID = "_DETAIL_ROWID";
"_detail_deleted" := "_detail_deleted" + 1;
elsif "_detail_action" = 'UPDATE' then
UPDATE WWV_30898_DEMO.EMP SET EMPNO="_d_data_rec".EMPNO,ENAME="_d_data_rec".ENAME,JOB="_d_data_rec".JOB,MGR="_d_data_rec".MGR,HIREDATE="_d_data_rec".HIREDATE,SAL="_d_data_rec".SAL,COMM="_d_data_rec".COMM,DEPTNO ="_d_data_rec".DEPTNO WHERE ROWID = "_DETAIL_ROWID" ;
"_detail_updated" := "_detail_updated" + 1;
elsif "_detail_action" = 'INSERT' then
INSERT INTO WWV_30898_DEMO.EMP (EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,COMM,DEPTNO) VALUES ("_d_data_rec".EMPNO,"_d_data_rec".ENAME,"_d_data_rec".JOB,"_d_data_rec".MGR,"_d_data_rec".HIREDATE,"_d_data_rec".SAL,"_d_data_rec".COMM,"_d_data_rec".DEPTNO) RETURNING ROWID INTO "_DETAIL_ROWID";
"_detail_inserted" := "_detail_inserted" + 1;
end if;
............................

Error creating Master/Detail Form

Hi,
I tried to create a master detail form. I went through all the steps fine, only when i click the button to create the form, i received the following errors:
ORA-20001: Unable to create master detail page. ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Unable to create Master Detail pages.
Could someone please tell me what's wrong?
Thanks,
Patrick.

We are getting this message in several areas in the development environmnet. It's happening in the developer login screen, when creating new tabs, and when tryig to create master detail reports. Here is our error from the Apache Log:
[Mon Mar 2 11:41:31 2009] [error] [client 10.64.8.231] [ecid: 1236012090:148.94.143.136:24226:0:1621,0] mod_plsql: /pls/apex_qmnt/wwv_flow.accept HTTP-404 ORA-06502: PL/SQL: numeric or value error\nORA-06512: at line 31\n
I think this is different from the issue above as that is due to too many items in a shuttle list. Ours seems to be related to our new APEX insstallation. Any help is appreciated here.

Error while saving in Master Detail Form

Similar Messages

Maybe you are looking for