Error While Saving Mapping For A Dimension

I am getting The Error While Saving The mapping For a Dimension
Any Clue?
An error occurred creating DimensionMapGroup BROKERS.MAPGROUP1.DIMENSIONMAPGROUP : ***Error Occured in
DELETE_MAPPING_GROUP: Analytic workspace object __XML_STARTUP_CALCMMBRS does
not exist.
Thanks
Raghu

Check the OSS note 550760 regarding the issue.

Similar Messages

ENT-06954: Error while Displaying BIBean for Cube/Dimension Dataviewer.

Hi all,
I have defined a cube with three dimensions. All elements are deployed and the mappings is executed successfully. If I try to open the dataviewer either for the cube or for the dimensions I receive the following errors:
ENT-06954: Error while Displaying BIBean for Cube Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerMain.getDataviewObject(CubeDataViewerMain.java:391)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.CubeDataViewerEditor._init(CubeDataViewerEditor.java:66)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
ENT-06972: Error while Displaying BIBean for Dimension Dataviewer.
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerMain.getDimensionListObject(DimDataViewerMain.java:479)
     at oracle.wh.ui.owbcommon.dataviewer.dimensional.DimDataViewerEditor._init(DimDataViewerEditor.java:89)
     at oracle.wh.ui.editor.Editor.init(Editor.java:1115)
     at oracle.wh.ui.editor.Editor.showEditor(Editor.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1431)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1344)
     at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1362)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:864)
     at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:851)
     at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
In another warehouse this function works properly. I am using OWB 10gR2 (10.2.0.1.31).
Any hints to fix this issue would be appreciated.
Thanks in Advance, C.

If you run OWB using the supplied shell script or batch file are there other errors on the console before the exception. OWB uses a component (OLAPI does some validation over and above any other) which dumps the errors on the the standard output which often illustrates some invalid metadata in the OLAP catalog.

Error while create aggmap for concatenated dimension ???

How can I create aggmap for concatenated dimension ??
I created dimensions named awprod_lvl0 ,awprod_lvl1,awprod_lvl2,awprod_lvl3,awprod_lvl4 and concatenated with a dimension awproducts. Then I created a parent relation awproducts.parents and mapped into the relational tables using sql fetch procedure .Iam able to see values in the olap work sheet .When i tried to create aggmap for different aggregation , it is throwing an error??It is telling that awproducts and awpro_lvl4_id cannot appear because they share same base level dimension...
can anyone help in resolving this problem?????

Jithesh, could you provide the exact definitions for the aggmaps, dimensions and relations that you're using?

Error while saving layout for report

Using BIEE 11. (Win64 Server 2003 R2 - russian edition)
When designing layout for report and putting text field (dos'nt matter - russ or engl) - I get an error during saving - 'Error when saving layout' (trunslated from russ)
This happens only when putting text field, with other types of filds all is ok!
Where can I find more detailed info about my error?
Also when I choose layout from existing e.g. - Dashboard.xpt and save - I get the same error. When I cut off all text fields from this template - I can successfully save it.
Thanks

Check the OSS note 550760 regarding the issue.

Error while saving view for a report

Hi All,
I have transported queries to production and executing them from web, when I am saving the view for a report I get an error
" The Object cannot not be processed due to a transport problem - Notification Number RSWWW 240 "
What could be the problem...please help
Thanks
Indraneel

Check the OSS note 550760 regarding the issue.

FM error while saving posting for FB60

Dear all,
i have implemented FM in ecc 6 ver ,while doing FB60 i got the below error.
FM account assignment SPML/DUMMY cannot be posted in posting ledger 9A
Message no. FMBS123
Diagnosis
The budget structure settings do not allow posting to the FM account assignment SPML/DUMMY. The check of the budget structure ended with the return code 4.
The system recognizes the following return codes for the check of posting addresses:
u2022     Return code 1:
The check of posting addresses is switched on. However the FM account assignment SPML/DUMMY is missing in the budget structure. Insert this account assignment in the budget structure for the posting ledger 9A.
u2022     Return code 2:
The check of posting addresses is switched off, but the validation of posting addresses does not allow posting on this address. Check the implementation of the Business Add-In (BAdI) Validate Budget and Posting Addresses in BS.
u2022     Return code 3:
The FM account assignment SPML/DUMMY leads to a conflict when you define a grouping key within the context of the budget structure. Check the implementation of the Business Add-In (BAdI) Define Grouping Key.
u2022     Return code 4:
The derivation strategy used for deriving the budget address from the posting address derives an invalid budget address. You can use the program for displaying of budget structure settings to find out which derivation strategy is used. Check the Derivation Strategy for BudgetAddresses in Customizing. This error may also be caused by inconsistent customizing of active FM account assignment elements in BCS and FM. This can be checked in IMG activity Activate Account Assignment Elements in Budget Control System.
System Response
Processing stops.
Procedure
Check the budget structure settings according to the given return code.

Hi,
Two things:
a) FMDERIVE is relevant for both former and BCS models. It's a strategy which derives FM objects (not address) for postings of the document which have to be assigned to FM (basically, most of FI and LO documents).
b) Strategy for derivation of budget address is something different. Here, you can tell the system where you want your budget to be checked. For example, the posting goes to fund centre X (either by direct entry or via derivation strategy put in FMDERIVE), but the budget to be checked is on fund centre Y. This functionality could be also achieved with AVC controlling objects, but since you work with budget structure, it's more natural to do it there. If your posting and budget entries are on the same level, then you basically don't need the budget address derivation strategy at all.
Regards,
Eli

Error while running procedure for refreshing AWS

Hello There,
I am using a procedure which consists the script of refreshing the analytic workspace. I call this procedure from Business objects data services for automatic refresh.
It used to work perfectly until the recent changes implemented.
The issue is, when I run the procedure the cube refreshes successfully. When the same procedure is called from BODS, it shows an error.
Error is :: XOQ-01601: error while loading data for cube dimension "BI_PETRA_DWH.ACTIVITY_TIME" into analytic workspace
Underlying DB error is : ORA-01858: a non -numeric character was found where a numeric was expected.
I dont get this error if I run procedure directly in SQL developer.
I verified attribues of dimension, there is only one numeric attribute and it is mapped to only numeric columns of view.
Can you please help me fixing this issue?
Thanks in advance.

Hello There,
I am using a procedure which consists the script of refreshing the analytic workspace. I call this procedure from Business objects data services for automatic refresh.
It used to work perfectly until the recent changes implemented.
The issue is, when I run the procedure the cube refreshes successfully. When the same procedure is called from BODS, it shows an error.
Error is :: XOQ-01601: error while loading data for cube dimension "BI_PETRA_DWH.ACTIVITY_TIME" into analytic workspace
Underlying DB error is : ORA-01858: a non -numeric character was found where a numeric was expected.
I dont get this error if I run procedure directly in SQL developer.
I verified attribues of dimension, there is only one numeric attribute and it is mapped to only numeric columns of view.
Can you please help me fixing this issue?
Thanks in advance.

Error while saving Prod order - "Class for order classification"

Hi all
I am getting the following error while saving the Production Order -
"Class for order classification has not been generated".
I went into the custiomization settings and tried to generate the class. But I get another error "No batch input data for screen SAPMSSY3 0131". The line items are also all in red and green.
Any help would be highly appreciated.
Thanks in advance.
Hrishi

Solved

ENT-06972: Error While Displaying BIBEAN for Dimension Dataviewer

Hi, I got the following message out of the blue when trying to view data for a dimension within OWB :-
ENT-06972: Error While Displaying BIBEAN for Dimension Dataviewer
Not only can I not see the data for the new dimension I was creating, but all my other existing dimensions generate the same error. Although I can see the data in the underlying db tables none of my Disco reports work either now !.
I have stopped and started the system to no avail.
Any ideas (while I log an SR) ?
I think the OLAP catalog is somewhat screwed.
thanks
Paul

Before you deploy the dimensions and the cube, ensure that the deployment option is set to Deploy to Catalog Only. Using this option, you can view the loaded data in the dimensions and the cube in the Data Viewer.

Error while saving

Hello Experts,
I am facing an issue while saving a BO. We have a Z-BO which works very well in 4.0. We have upgraded to 7.0 and we are facing the issue while trying to save an entry from the list tile.
The BO is configured as a child segment of BDOC CAPGEN_OBJECT_WRITE. We have a Z-table which should be populated with the grid entry details.
When I try to save, it raises an error "Error while saving", and if I check the error from the Windows menu, I can see the context as "UI_CORE_SAVE_FAILED_STA". Any idea if there may be issue with Anchor mapping or something else?
I tried debugging it and it does not stop anywhere. It seems that this is not due to programming logic. I am stuck here for quite sometime. Kindly advise.
Appreciate your valuable feedback on this. Thanks in advance.
Regards
Pijush

Hi Wolfhard,
Thanks for your reply.
The table is generated successfully in the laptop - there is no error when I generated the table using client console. Do I need to check anything else in this regard?
Regarding the BDOC, this Z-table (and BO) is mapped as a child segment of BDOC CAPGEN_OBJECT_WRITE (which is a Synchronization (Write) BDoc). When the system is upgraded (from 4.0 -> 7.0), the Z-segment was missing in Sandbox system. I have added the Z-segment again to BDOC CAPGEN_OBJECT_WRITE based on the old system (4.0) details.
Will there be a chance of impact due to that due to upgrade? Any other things to check? Appreciate your help.
Regards
Pijush

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

Error while saving FYV : Gaps in financial year variant periods

Hello Experts,
We are getting an error while saving a new FYV as:
Gaps in financial year variant periods XY
Message no. FGV556
Diagnosis
The period specification has gaps. The periods must be sequentially numbered without any gaps.
System Response
Only a correctly defined period assignment can be saved.
Procedure
Define the periods with consecutive numbers.
Details: The new FYV has 52/53 weeks as posting periods depending on calendar year.
For example, we are trying to define Fisc 2009 as follows. (Fiscal year 2009 = Nov 01 2008 to Oct 31 2009).
Month-Day-Period-Yearshift
11     ---     7     ---     1     ---     +1
11     ---     14     ---     2     ---     +1
11     ---     21     ---     3     ---     +1
11     ---     28     ---     4     ---     +1
12     ---     5     ---     5     ---     +1
12     ---     12     ---     6     ---     +1
12     ---     19     ---     7     ---     +1
12     ---     26     ---     8     ---     +1
12     ---     31     ---     9     ---     +1
1     ---     3     ---     9     ---     0
1     ---     10     ---     10     ---     0
1     ---     17     ---     11     ---     0
1     ---     24     ---     12     ---     0
1     ---     31     ---     13     ---     0
2     ---     7     ---     14     ---     0
2     ---     14     ---     15     ---     0
2     ---     21     ---     16     ---     0
2     ---     28     ---     17     ---     0
3     ---     7     ---     18     ---     0
3     ---     14     ---     19     ---     0
3     ---     21     ---     20     ---     0
3     ---     28     ---     21     ---     0
4     ---     4     ---     22     ---     0
4     ---     11     ---     23     ---     0
4     ---     18     ---     24     ---     0
4     ---     25     ---     25     ---     0
4     ---     2     ---     26     ---     0
5     ---     9     ---     27     ---     0
5     ---     16     ---     28     ---     0
5     ---     23     ---     29     ---     0
5     ---     30     ---     30     ---     0
6     ---     6     ---     31     ---     0
6     ---     13     ---     32     ---     0
6     ---     20     ---     33     ---     0
6     ---     27     ---     34     ---     0
7     ---     4     ---     35     ---     0
7     ---     11     ---     36     ---     0
7     ---     18     ---     37     ---     0
7     ---     25     ---     38     ---     0
8     ---     1     ---     39     ---     0
8     ---     8     ---     40     ---     0
8     ---     15     ---     41     ---     0
8     ---     22     ---     42     ---     0
8     ---     29     ---     43     ---     0
9     ---     5     ---     44     ---     0
9     ---     12     ---     45     ---     0
9     ---     19     ---     46     ---     0
9     ---     26     ---     47     ---     0
10     ---     3     ---     48     ---     0
10     ---     10     ---     49     ---     0
10     ---     17     ---     50     ---     0
10     ---     24     ---     51     ---     0
10     ---     31     ---     52     ---     0
The above entries cover all the dates in calendar year 2009, that is, Jan 2009 to Oct 2009 is covered by periods 10 to 52 and Nov 01 2009 to Dec 31 2009 is covered by period 1 to 9 of the following fiscal year 2010.
Inspite of making sure that all the days of 2009 are covered by periods 1 to 52. We are still unable to save the FYV.
Please help!
Susan

Hello, I am getting this error while saving the FSV. My FSV is based on Weeks. Below is what I am inputting for this. Other details are Calender Year - 2017, No. of posting periods - 53, checked year dependent. Also, I have FSV for previous years also where weeks are 52 but configured as 53. So, hope that this is not creating this issue. Solicit your early response.
Month
Day
Period
Year Shift
1
7
1
0
1
14
2
0
1
21
3
0
1
28
4
0
2
4
5
0
2
11
6
0
2
18
7
0
2
25
8
0
3
4
9
0
3
11
10
0
3
18
11
0
3
25
12
0
4
1
13
0
4
8
14
0
4
15
15
0
4
22
16
0
4
29
17
0
5
6
18
0
5
13
19
0
5
20
20
0
5
27
21
0
6
3
22
0
6
10
23
0
6
17
24
0
6
24
25
0
7
1
26
0
7
8
27
0
7
15
28
0
7
22
29
0
7
29
30
0
8
5
31
0
8
12
32
0
8
19
33
0
8
26
34
0
9
2
35
0
9
9
36
0
9
16
37
0
9
23
38
0
9
30
39
0
10
7
40
0
10
14
41
0
10
21
42
0
10
28
43
0
11
4
44
0
11
11
45
0
11
18
46
0
11
25
47
0
12
2
48
0
12
9
49
0
12
16
50
0
12
23
51
0
12
30
52
0
12
31
1
+1
Thanks
Deepankar

Error while saving project in cProjects

Hello,
I am getting following error while saving a project in cProjects-
Access via 'NULL' object reference not possible.
Details of the error are given below-
Can somebody please help me resolve this error?
Thanks and regards,
Milind Dumbre
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
      caught in    procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "LR_CALC").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.

Hi Milind,
You may check the settings by navigating to the following path
IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
--> Define Object Links for Accounting Integration.
Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
Let me know if this helps.
Regards,
Vivek Pandey

Error While Saving Mapping For A Dimension

Similar Messages

Maybe you are looking for